FCC ID 2AF5PQ11

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035

Date of Grant: 04/07/2022 Application Dated: 03/21/2022

MTRLC LLC

275 Turnpike Street

Suite 101

Canton, MA 02021

Attention: Andrew Pollock

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AF5PQ11
Name of Grantee:	MTRLC LLC
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	AX3000 Dual-band Mesh WiFi

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.547
CC MO	15E	5250.0  -  5250.0	0.1047
CC MO ND	15E	5260.0  -  5320.0	0.2427
CC MO ND	15E	5500.0  -  5700.0	0.2466
CC MO	15E	5745.0  -  5825.0	0.9484
CC EP MO	15E	5845.0  -  5885.0	1.0399
CC EP MO	15E	5835.0  -  5875.0	1.4825
CC EP MO	15E	5855.0  -  5855.0	0.826
CC EP MO	15E	5815.0  -  5815.0	0.2924

Output Power listed is the maximum conducted output power for UNII-1, UNII-2A, UNII-2C, and UNII-3. Output Power listed is the maximum EIRP for UNII-4. Device is restricted to indoor use only. This device supports 2x2 MIMO and has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 24 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
EP:	Output power is Effective Isotropic Radiated Power (EIRP)
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

MTRLC LLC 275 Turnpike Street Suite 101 Canton, MA 02021 United States

Date of Grant: 04/07/2022 Application Dated: 03/21/2022

Attention: Andrew Pollock

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AF5PQ11
Name of Grantee:	MTRLC LLC
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	AX3000 Dual-band Mesh WiFi
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.547
CC MO	15E	5250.0  -  5250.0	0.1047
CC MO ND	15E	5260.0  -  5320.0	0.2427
CC MO ND	15E	5500.0  -  5700.0	0.2466
CC MO	15E	5745.0  -  5825.0	0.9484
CC EP MO	15E	5845.0  -  5885.0	1.0399
CC EP MO	15E	5835.0  -  5875.0	1.4825
CC EP MO	15E	5855.0  -  5855.0	0.826
CC EP MO	15E	5815.0  -  5815.0	0.2924

Output Power listed is the maximum conducted output power for UNII-1, UNII-2A, UNII-2C, and UNII-3. Output Power listed is the maximum EIRP for UNII-4. Device is restricted to indoor use only. This device supports 2x2 MIMO and has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 24 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
EP:	Output power is Effective Isotropic Radiated Power (EIRP)
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application CyxaF8ylLzjtb8xzle4Yrw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035

Date of Grant: 04/07/2022 Application Dated: 03/21/2022

MTRLC LLC

275 Turnpike Street

Suite 101

Canton, MA 02021

Attention: Andrew Pollock

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AF5PQ11
Name of Grantee:	MTRLC LLC
Equipment Class:	Digital Transmission System
Notes:	AX3000 Dual-band Mesh WiFi

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.9908

Power listed is maximum combined conducted output power. This device supports 20 and 40 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 24 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

MTRLC LLC 275 Turnpike Street Suite 101 Canton, MA 02021 United States

Date of Grant: 04/07/2022 Application Dated: 03/21/2022

Attention: Andrew Pollock

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AF5PQ11
Name of Grantee:	MTRLC LLC
Equipment Class:	Digital Transmission System
Notes:	AX3000 Dual-band Mesh WiFi
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.9908

Power listed is maximum combined conducted output power. This device supports 20 and 40 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 24 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: