FCC ID 2AF88-1218RF

1218RF Radio Module

by Siemens Industry Software B.V.

Grantee Code: 2AF88   Product Code: 1218RF
Latest application date: 2016-02-29

Device Images

FCC ID Device Details

FCC ID2AF88-1218RF
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AF88
Product Code1218RF
Applicant BusinessSiemens Industry Software B.V. 🇳🇱
Related Domains siemens.com
Equipment Class1218RF Radio Module
Test FirmTUV Rheinland Nederland B.V.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2406-2474 MHzOriginal Equipment2016-02-29

Exhibits

DocumentTypeAvailableFile
15_Rev01_2AF88-1218RF_User manualUsers Manual2016-02-29PDF 411.1 KB
09_2AF88-1218RF_Photo Report_InternalInternal Photos2016-02-29PDF 1.3 MB
10_Rev01_2AF88-1218RF_Photo Report_ExteriorExternal Photos2016-02-29PDF 1.1 MB
11_Rev01_2AF88-1218RF_Label InfoID Label/Location Info2016-02-29PDF 464.9 KB
14a_2AF88-1218RF_Photo Report_TestsetupTest Setup Photos2016-02-29PDF 581.6 KB
14b_Rev01_2AF88-1218RF_Photo Report_Testsetup_Part 15BTest Setup Photos2016-02-29PDF 1.3 MB
13a_Rev01_2AF88-1218RF_Testreport ModuleTest Report2016-02-29PDF 1.8 MB
13b_Rev01_2AF88-1218RF_LMS SCADAS PBN_FCC_15B reportTest Report2016-02-29PDF 874 KB
01_Rev01_2AF88-1218RF_Cover letterCover Letter(s)2016-02-29PDF 27.4 KB
02_2AF88-1218RF_Confidentiality letterCover Letter(s)2016-02-29PDF 303.2 KB
03_2AF88-1218RF_Authority LetterCover Letter(s)2016-02-29PDF 363.5 KB
16_Rev02_2AF88-1218RF_RF Exposure_letterRF Exposure Info2016-02-29PDF 88.9 KB
18_2AF88-1218RF_Modular Approval Request LetterCover Letter(s)2016-02-29PDF 23.3 KB
Confidential_08_Rev01_2AF88-1218RF_Block Diagram Metadata onlyBlock DiagramPDF 100 KB
Confidential_08_2AF88-1218RF_Schematics 1218rfv3 Metadata onlySchematicsPDF 18.3 KB
05_2AF88-1218RF_Antenna-info Metadata onlyOperational DescriptionPDF 83.7 KB
Confidential_12_Rev01_2AF88-1218RF_Operational description Metadata onlyOperational DescriptionPDF 183.2 KB
cc8520 Metadata onlyOperational DescriptionPDF 994.5 KB

Application Information

Application IDRwayJc1UAp0gMUDInsfAAQ==
Final Action Date2016-02-29
Application PurposeOriginal Equipment
Applicant FRN0024812760
Model1218RF
Frequency Range2406-2474 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device Description1218RF Radio Module
Responsible PartyJos op 't Hoog, Quality Manager, jos.opthoog@siemens.com , +31765736363
AgentRichard Richard Richard, TUV Rheinland Nederland B.V., products@nl.tuv.com , 01131594505005
Technical ContactAdrie Dirven, Siemens Industry Software B.V., adrie.dirven@siemens.com , 01131765736363
Non-Technical ContactTom Schrijer, Siemens Industry Software B.V., tom.schrijer@siemens.com , 01131765736363
Test FirmRichard van der Meer, TUV Rheinland Nederland B.V., richard.vandermeer@nl.tuv.com , 31-088-888-7888
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is conducted. Limited Single Modular Approval. This module may only be installed in the specific host(s) as shown in this filing. This module must be professionally installed. Instructions on the installation and/or removal of this module may not be provided to the end user. This module is granted for use in mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the module or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

Applications

Application IDDatePurpose
RwayJc1UAp0gMUDInsfAAQ==2016-02-29Original Equipment
B4Y/oH4pqcFOXVnsepsOnw==2016-02-29Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
15BCC
2406-2474 MHz0.019000015CCC

Grants

TCB Grant - Application RwayJc1UAp0gMUDInsfAAQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 02/29/2016

Application Dated: 02/26/2016
Siemens Industry Software B.V.
Druivenstraat 47
Breda, 4816KB
Netherlands
 
Attention: Jos op 't Hoog , Quality Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AF88-1218RF
Name of Grantee:  Siemens Industry Software B.V.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 1218RF Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2406.0  -  2474.0 0.019  

Power Output listed is conducted. Limited Single Modular Approval. This module may only be installed in the specific host(s) as shown in this filing. This module must be professionally installed. Instructions on the installation and/or removal of this module may not be provided to the end user.

This module is granted for use in mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures.

Only those antenna(s) tested with the module or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application RwayJc1UAp0gMUDInsfAAQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Siemens Industry Software B.V.
Druivenstraat 47
Breda, 4816KB
Netherlands
  Date of Grant: 02/29/2016

Application Dated: 02/26/2016
 
Attention: Jos op 't Hoog , Quality Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AF88-1218RF
Name of Grantee:  Siemens Industry Software B.V.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 1218RF Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2406.0  -  2474.0 0.019  

Power Output listed is conducted. Limited Single Modular Approval. This module may only be installed in the specific host(s) as shown in this filing. This module must be professionally installed. Instructions on the installation and/or removal of this module may not be provided to the end user.

This module is granted for use in mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures.

Only those antenna(s) tested with the module or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application B4Y/oH4pqcFOXVnsepsOnw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 02/29/2016

Application Dated: 02/26/2016
Siemens Industry Software B.V.
Druivenstraat 47
Breda, 4816KB
Netherlands
 
Attention: Jos op 't Hoog , Quality Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AF88-1218RF
Name of Grantee:  Siemens Industry Software B.V.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: 1218RF Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application B4Y/oH4pqcFOXVnsepsOnw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Siemens Industry Software B.V.
Druivenstraat 47
Breda, 4816KB
Netherlands
  Date of Grant: 02/29/2016

Application Dated: 02/26/2016
 
Attention: Jos op 't Hoog , Quality Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AF88-1218RF
Name of Grantee:  Siemens Industry Software B.V.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: 1218RF Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: