FCC ID 2AFDI-ITCNFA324

FCC ID	2AFDI-ITCNFA324
Mirrors	fcc.id \| gov \| fccid.ai
Grantee Code	2AFDI
Product Code	ITCNFA324
Applicant Business	Lantronix Canada, ULC. 🇺🇸
Related Domains	lantronix.com
Equipment Class	InFlyt Wireless Mode Controller
Test Firm	TUV Rheinland of North America Inc.

Frequency Range	Application Purpose	Final Action Date
2422-2452 MHz	Class II permissive change or modification of presently authorized equipment	2022-03-16
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2022-03-16
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2022-03-16
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2020-03-12
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2020-03-12
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2020-03-12
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2019-02-20
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2019-02-20
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2019-02-20
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2017-02-01
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2017-02-01
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2017-02-01
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2016-11-01
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2016-11-01
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2016-11-01
2402-2480 MHz	Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA324 Grant Date: 05/29/2015	2015-12-10
2402-2480 MHz	Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA324 Grant Date: 05/29/2015	2015-12-10
5180-5240 MHz	Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA324 Grant Date: 05/29/2015	2015-12-10

Document	Type	Available	File
Integrators Guide	Users Manual	2020-03-12	PDF 168.3 KB
User Manual	Users Manual	2020-03-12	PDF 1.5 MB
User Manual	Users Manual	2019-02-20	PDF 254 KB
User Manual	Users Manual	2017-02-01	PDF 156.4 KB
User Manual	Users Manual	2016-11-01	PDF 910.2 KB
User Manual Regulatory Guide	Users Manual	2016-11-01	PDF 1.3 MB
Internal Photos	Internal Photos	2020-03-12	PDF 355.9 KB
Internal Photos	Internal Photos	2016-11-01	PDF 167 KB
Ext	External Photos	2022-03-16	PDF 552.1 KB
External Photos	External Photos	2020-03-12	PDF 857.5 KB
External Photos	External Photos	2016-11-01	PDF 604 KB
External Photos_20151207_v1 - External Photos	External Photos	2015-12-10	PDF 1.6 MB
Label	ID Label/Location Info	2022-03-16	PDF 829.7 KB
Module Label	ID Label/Location Info	2022-03-16	PDF 829.7 KB
Labels and Locations	ID Label/Location Info	2020-03-12	PDF 601.5 KB
Labels and Locations	ID Label/Location Info	2016-11-01	PDF 837.9 KB
ID Label & Location Info._20151203_v1 - ID Label Location Information	ID Label/Location Info	2015-12-10	PDF 25.1 KB
Laird Chip Antenna Operational Description	Operational Description	2019-02-20	PDF 523 KB
Operational Description Chip Antenna	Operational Description	2019-02-20	PDF 523 KB
Operational Description Vendor PN in PDM	Operational Description	2019-02-20	PDF 267.1 KB
Vendor PN in PDM Operational Description	Operational Description	2019-02-20	PDF 267.1 KB
Setup	Test Setup Photos	2022-03-16	PDF 1.3 MB
Test Setup	Test Setup Photos	2022-03-16	PDF 1.3 MB
Test Setup Photos	Test Setup Photos	2019-02-20	PDF 334 KB
Test Setup Photos	Test Setup Photos	2017-02-01	PDF 461.3 KB
PCII EMC Report	Test Report	2022-03-16	PDF 4.3 MB
Test Report	Test Report	2022-03-16	PDF 4.3 MB
Test Report	Test Report	2019-02-20	PDF 3.7 MB
Test Report	Test Report	2017-02-01	PDF 3.1 MB
TCB Attestation Letter	Attestation Statements	2020-03-12	PDF 115 KB
Power Level Attestation	Attestation Statements	2016-11-01	PDF 140.8 KB
Attestations_20151203_v1 - Cover Letter - Agent Authorization	Cover Letter(s)	2015-12-10	PDF 758.4 KB
Attestations_20151203_v1 - Cover Letter - Change In ID Authorization Letter (Qua	Cover Letter(s)	2015-12-10	PDF 37 KB
Attestations_20151203_v1 - Cover Letter - Change in ID (Intrinsyc)	Cover Letter(s)	2015-12-10	PDF 21.5 KB
Attestations_20151203_v1 - Cover Letter - Original Grant (PPD-QCNFA324)	Cover Letter(s)	2015-12-10	PDF 165.9 KB
10 in long	Cover Letter(s)	2022-03-16	PDF 725.9 KB
10 in short	Cover Letter(s)	2022-03-16	PDF 715.8 KB
10in long	Cover Letter(s)	2022-03-16	PDF 725.9 KB
10in short	Cover Letter(s)	2022-03-16	PDF 715.8 KB
Ant Spec	Cover Letter(s)	2022-03-16	PDF 1 MB
Ant X2	Cover Letter(s)	2022-03-16	PDF 761.8 KB
Antenna x2	Cover Letter(s)	2022-03-16	PDF 761.8 KB
PCII Letter	Cover Letter(s)	2022-03-16	PDF 220.8 KB
System	Cover Letter(s)	2022-03-16	PDF 678.6 KB
Authorization Letter	Cover Letter(s)	2020-03-12	PDF 118 KB
Confidentiality Letter	Cover Letter(s)	2020-03-12	PDF 132.1 KB
Modular Approval Letter	Cover Letter(s)	2020-03-12	PDF 191 KB
Permissive Change Letter	Cover Letter(s)	2020-03-12	PDF 110 KB
Agent Authorization Cover Letter	Cover Letter(s)	2019-02-20	PDF 133 KB
Agent Letter	Cover Letter(s)	2019-02-20	PDF 133 KB
Class II Permissive Change Letter	Cover Letter(s)	2019-02-20	PDF 108.9 KB
Agent Authorization	Cover Letter(s)	2017-02-01	PDF 129.8 KB
C2PC Letter	Cover Letter(s)	2017-02-01	PDF 128.9 KB
Authorization Letter	Cover Letter(s)	2016-11-01	PDF 369.6 KB
Authorization Letter	Cover Letter(s)	2016-11-01	PDF 41.2 KB
Confidentiality Letter	Cover Letter(s)	2016-11-01	PDF 431.7 KB
Permissive Change Letter	Cover Letter(s)	2016-11-01	PDF 387 KB
Report	RF Exposure Info	2022-03-16	PDF 2.4 MB
RF Exposure SAR Report Exclusion	RF Exposure Info	2020-03-12	PDF 107.2 KB
RF Exposure SAR Reprort Exclusion	RF Exposure Info	2020-03-12	PDF 107.2 KB
RF Exposure Info	RF Exposure Info	2016-11-01	PDF 123.3 KB
Parts List Metadata only	Parts List/Tune Up Info		PDF 817.9 KB

Application ID	WNTeTOjKJIvaQMaOH4qSEQ==
Final Action Date	2022-03-16
Application Purpose	Class II permissive change or modification of presently authorized equipment
Applicant FRN	0027917293
Model	ITCNFA324
Frequency Range	2422-2452 MHz
Equipment Class	DTS - Digital Transmission System
Device Description	InFlyt Wireless Mode Controller
Responsible Party	Fathi Hakam, VP of Engineering, fhakam@lantronix.com , +1 (949) 453-3990
Technical Contact	Tony Nguyen, Thales Avionics Inc, tony3.nguyen@us.thalesgroup.com , 949.790.2714
Test Firm	David Spencer, TUV Rheinland of North America Inc., dspencer@us.tuv.com , (925) 249-9123 x2116
TCB Email	whgraff@hotmail.com
TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term Confidentiality	No
Long-Term Confidentiality	No
Grant Deferral	No
Modular Equipment	Single Modular Approval
Composite Device	Yes
Composite Part	No
Cognitive Radio	No
Authorization Waiver	No
Authorization Waiver Approved	No
Section 5301 Certification	Yes
Related OET Knowledge DataBase Inquiry	No
Grant Comments	Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. This filing meets the SAR threshold exclusion set forth in KDB 447498 and therefore can be used in mobile/portable configurations. This change to request approval for the portable use category, specific to host Thales InFlyt Wireless Mode Controller using three antenna configurations at reduced power Maximum SAR value @0mm spacing: 1.43W/kg

Application ID	Date	Purpose
WNTeTOjKJIvaQMaOH4qSEQ==	2022-03-16	Class II permissive change or modification of presently authorized equipment
R57j6xJFJxjY+cY4+bdo6Q==	2022-03-16	Class II permissive change or modification of presently authorized equipment
8RE8pssu7x5XRyAEU3tAyg==	2022-03-16	Class II permissive change or modification of presently authorized equipment
uMCHyPdX89gdbfFposoFdQ==	2020-03-12	Class II permissive change or modification of presently authorized equipment
tCT4G8xvcyxcKevkHlu25g==	2020-03-12	Class II permissive change or modification of presently authorized equipment
MO5wVK0iOiTlRJRy3QS+Xw==	2020-03-12	Class II permissive change or modification of presently authorized equipment
p4myGt2N5CXidCvGB5ESDQ==	2019-02-20	Class II permissive change or modification of presently authorized equipment
nLsV00qOSJ1BDv6kzkk9Sg==	2019-02-20	Class II permissive change or modification of presently authorized equipment
6qJdBqjoUUYG+M4Eh36hpA==	2019-02-20	Class II permissive change or modification of presently authorized equipment
zmqe06NKDzEoK5B2PquuOQ==	2017-02-01	Class II permissive change or modification of presently authorized equipment
NrlrVcGh804RZVsLZdq8ww==	2017-02-01	Class II permissive change or modification of presently authorized equipment
21apa0Gi2exEYP5JePO2yA==	2017-02-01	Class II permissive change or modification of presently authorized equipment
m2As41/MRZhH++1c6wj21Q==	2016-11-01	Class II permissive change or modification of presently authorized equipment
j4Ia1NrSr5N5PbAfqaOAqw==	2016-11-01	Class II permissive change or modification of presently authorized equipment
hHTkcTQxvIhyjmDLw8blSg==	2016-11-01	Class II permissive change or modification of presently authorized equipment
v+rZj4l3pDc2g7Dc/YMLhw==	2015-12-10	Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA324 Grant Date: 05/29/2015
bsUFYcPbl/ecjZ4tPwrV1A==	2015-12-10	Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA324 Grant Date: 05/29/2015
Ii5nG8QbPdfwz1BhSjM2Pw==	2015-12-10	Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA324 Grant Date: 05/29/2015
0YqcI5b+kI+StIWvzzhlfQ==	2015-12-10	Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA324 Grant Date: 05/29/2015

Frequency	Output	Rules	Grant Notes
		15B	CC
2402-2480 MHz	0.0081000	15C	CC
2402-2480 MHz	0.0078	15C	CC, MO
2402-2480 MHz	0.1500000	15C	CC
2402-2480 MHz	0.0232000	15C	CC
2402-2480 MHz	0.0020000	15C	CC
2402-2480 MHz	0.0150000	15C	CC
2402-2480 MHz	0.002	15C	CC, MO
2402-2480 MHz	0.00095	15C	CC
2412-2462 MHz	0.251	15C	CC, MO
2412-2462 MHz	0.485	15C	CC, MO
2412-2462 MHz	0.082	15C	CC, MO
2412-2462 MHz	0.0692	15C	CC, MO
2412-2462 MHz	0.485	15C	CO, MO
2422-2452 MHz	0.205	15C	CC, MO
2422-2452 MHz	0.082	15C	CC, MO
2422-2452 MHz	0.0339	15C	CC, MO
5180-5240 MHz	0.08	15E	38, CC, MO
5180-5240 MHz	0.025	15E	38, CC, MO
5180-5240 MHz	0.0191	15E	38, CC, MO
5180-5240 MHz	0.0796	15E	CC, MO
5260-5320 MHz	0.0749	15E	38, CC, MO
5260-5320 MHz	0.027	15E	38, CC, MO
5260-5320 MHz	0.0174	15E	38, CC, MO
5260-5320 MHz	0.0743	15E	CC, MO
5500-5720 MHz	0.0501	15E	38, CC, MO
5500-5720 MHz	0.025	15E	38, CC, MO
5500-5720 MHz	0.0145	15E	38, CC, MO
5500-5720 MHz	0.0491	15E	CC, MO
5745-5825 MHz	0.0674	15E	38, CC, MO
5745-5825 MHz	0.02	15E	38, CC, MO
5745-5825 MHz	0.011	15E	38, CC, MO
5745-5825 MHz	0.0647	15E	CC, MO

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 02/01/2017

Application Dated: 02/01/2017

Lantronix Canada, ULC.

7535 Irvine Center Drive, Suite 100

Irvine, CA 92618

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Digital Transmission System
Notes:	802.11 A/B/G/N/AC WiFi + Bluetooth Module BT/BLE
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.00095
CC MO	15C	2412.0 - 2462.0	0.0692
CC MO	15C	2422.0 - 2452.0	0.0339

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Lantronix Canada, ULC.
7535 Irvine Center Drive, Suite 100
Irvine, CA 92618
United States

Date of Grant: 02/01/2017

Application Dated: 02/01/2017

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Digital Transmission System
Notes:	802.11 A/B/G/N/AC WiFi + Bluetooth Module BT/BLE
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.00095
CC MO	15C	2412.0 - 2462.0	0.0692
CC MO	15C	2422.0 - 2452.0	0.0339

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application WNTeTOjKJIvaQMaOH4qSEQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566

Date of Grant: 03/16/2022

Application Dated: 03/16/2022

Lantronix Canada, ULC.

7535 Irvine Center Drive, Suite 100

Irvine, CA 92618

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Digital Transmission System
Notes:	InFlyt Wireless Mode Controller
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.002
CC MO	15C	2412.0 - 2462.0	0.082
CC MO	15C	2422.0 - 2452.0	0.082

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. This filing meets the SAR threshold exclusion set forth in KDB 447498 and therefore can be used in mobile/portable configurations.

This change to request approval for the portable use category, specific to host Thales InFlyt Wireless Mode Controller using three antenna configurations at reduced power

Maximum SAR value @0mm spacing: 1.43W/kg

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Lantronix Canada, ULC.
7535 Irvine Center Drive, Suite 100
Irvine, CA 92618
United States

Date of Grant: 03/16/2022

Application Dated: 03/16/2022

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Digital Transmission System
Notes:	InFlyt Wireless Mode Controller
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.002
CC MO	15C	2412.0 - 2462.0	0.082
CC MO	15C	2422.0 - 2452.0	0.082

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. This filing meets the SAR threshold exclusion set forth in KDB 447498 and therefore can be used in mobile/portable configurations.

This change to request approval for the portable use category, specific to host Thales InFlyt Wireless Mode Controller using three antenna configurations at reduced power

Maximum SAR value @0mm spacing: 1.43W/kg

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application v+rZj4l3pDc2g7Dc/YMLhw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 12/10/2015

Application Dated: 12/09/2015

Lantronix Canada, ULC.

7535 Irvine Center Drive, Suite 100

Irvine, CA 92618

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Digital Transmission System
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.002
CC MO	15C	2412.0 - 2462.0	0.485
CC MO	15C	2422.0 - 2452.0	0.205

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Lantronix Canada, ULC.
7535 Irvine Center Drive, Suite 100
Irvine, CA 92618
United States

Date of Grant: 12/10/2015

Application Dated: 12/09/2015

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Digital Transmission System
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.002
CC MO	15C	2412.0 - 2462.0	0.485
CC MO	15C	2422.0 - 2452.0	0.205

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application uMCHyPdX89gdbfFposoFdQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 03/12/2020

Application Dated: 03/11/2020

Lantronix Canada, ULC.

7535 Irvine Center Drive, Suite 100

Irvine, CA 92618

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Digital Transmission System
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.002
CC MO	15C	2412.0 - 2462.0	0.485
CC MO	15C	2422.0 - 2452.0	0.205

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. This filing meets the SAR threshold exclusion set forth in KDB 447498 and therefore can be used in mobile/portable configurations.

This change to request approval for the portable use category, specific to host eSight Corporation's head mounted device: Models: 300200x where x signifies the color of the case. The only difference between model numbers is the enclosure color.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Lantronix Canada, ULC.
7535 Irvine Center Drive, Suite 100
Irvine, CA 92618
United States

Date of Grant: 03/12/2020

Application Dated: 03/11/2020

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Digital Transmission System
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.002
CC MO	15C	2412.0 - 2462.0	0.485
CC MO	15C	2422.0 - 2452.0	0.205

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. This filing meets the SAR threshold exclusion set forth in KDB 447498 and therefore can be used in mobile/portable configurations.

This change to request approval for the portable use category, specific to host eSight Corporation's head mounted device: Models: 300200x where x signifies the color of the case. The only difference between model numbers is the enclosure color.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application tCT4G8xvcyxcKevkHlu25g==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 03/12/2020

Application Dated: 03/11/2020

Lantronix Canada, ULC.

7535 Irvine Center Drive, Suite 100

Irvine, CA 92618

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.015

Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. This filing meets the SAR threshold exclusion set forth in KDB 447498 and therefore can be used in mobile/portable configurations.

This change to request approval for the portable use category, specific to host eSight Corporation's head mounted device: Models: 300200x where x signifies the color of the case. The only difference between model numbers is the enclosure color.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Lantronix Canada, ULC.
7535 Irvine Center Drive, Suite 100
Irvine, CA 92618
United States

Date of Grant: 03/12/2020

Application Dated: 03/11/2020

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.015

Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. This filing meets the SAR threshold exclusion set forth in KDB 447498 and therefore can be used in mobile/portable configurations.

This change to request approval for the portable use category, specific to host eSight Corporation's head mounted device: Models: 300200x where x signifies the color of the case. The only difference between model numbers is the enclosure color.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application R57j6xJFJxjY+cY4+bdo6Q==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566

Date of Grant: 03/16/2022

Application Dated: 03/16/2022

Lantronix Canada, ULC.

7535 Irvine Center Drive, Suite 100

Irvine, CA 92618

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	InFlyt Wireless Mode Controller
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.002

Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. This filing meets the SAR threshold exclusion set forth in KDB 447498 and therefore can be used in mobile/portable configurations.

This change to request approval for the portable use category, specific to host Thales InFlyt Wireless Mode Controller using three antenna configurations at reduced power output.

Maximum SAR value @ 0mm spacing: 1.43W/kg

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Lantronix Canada, ULC.
7535 Irvine Center Drive, Suite 100
Irvine, CA 92618
United States

Date of Grant: 03/16/2022

Application Dated: 03/16/2022

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	InFlyt Wireless Mode Controller
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.002

Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. This filing meets the SAR threshold exclusion set forth in KDB 447498 and therefore can be used in mobile/portable configurations.

This change to request approval for the portable use category, specific to host Thales InFlyt Wireless Mode Controller using three antenna configurations at reduced power output.

Maximum SAR value @ 0mm spacing: 1.43W/kg

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application p4myGt2N5CXidCvGB5ESDQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 02/20/2019

Application Dated: 02/20/2019

Lantronix Canada, ULC.

7535 Irvine Center Drive, Suite 100

Irvine, CA 92618

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.0796
CC MO	15E	5260.0 - 5320.0	0.0743
CC MO	15E	5500.0 - 5720.0	0.0491
CC MO	15E	5745.0 - 5825.0	0.0647

Single Modular Approval. Output power listed is maximum combined conducted output power. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

Class II Permissive Change: Adds Chip Antenna, with gains 5.0 dBi (5 GHz band) and 2.68 dBi (2.4 GHz band). Also adds Konstron Wi-Fi Flag antenna (P/N 730001001), with gains 4.9 dBi (5 GHz band) and 2.60 dBi (2.4 GHz band).

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Lantronix Canada, ULC.
7535 Irvine Center Drive, Suite 100
Irvine, CA 92618
United States

Date of Grant: 02/20/2019

Application Dated: 02/20/2019

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.0796
CC MO	15E	5260.0 - 5320.0	0.0743
CC MO	15E	5500.0 - 5720.0	0.0491
CC MO	15E	5745.0 - 5825.0	0.0647

Single Modular Approval. Output power listed is maximum combined conducted output power. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

Class II Permissive Change: Adds Chip Antenna, with gains 5.0 dBi (5 GHz band) and 2.68 dBi (2.4 GHz band). Also adds Konstron Wi-Fi Flag antenna (P/N 730001001), with gains 4.9 dBi (5 GHz band) and 2.60 dBi (2.4 GHz band).

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application NrlrVcGh804RZVsLZdq8ww==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 02/01/2017

Application Dated: 02/01/2017

Lantronix Canada, ULC.

7535 Irvine Center Drive, Suite 100

Irvine, CA 92618

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0 - 5240.0	0.0191
38 CC MO	15E	5260.0 - 5320.0	0.0174
38 CC MO	15E	5500.0 - 5720.0	0.0145
38 CC MO	15E	5745.0 - 5825.0	0.011

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Lantronix Canada, ULC.
7535 Irvine Center Drive, Suite 100
Irvine, CA 92618
United States

Date of Grant: 02/01/2017

Application Dated: 02/01/2017

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0 - 5240.0	0.0191
38 CC MO	15E	5260.0 - 5320.0	0.0174
38 CC MO	15E	5500.0 - 5720.0	0.0145
38 CC MO	15E	5745.0 - 5825.0	0.011

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application nLsV00qOSJ1BDv6kzkk9Sg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 02/20/2019

Application Dated: 02/20/2019

Lantronix Canada, ULC.

7535 Irvine Center Drive, Suite 100

Irvine, CA 92618

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0232

Single Modular Approval. Output power listed is maximum conducted output power. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

Class II Permissive Change: Adds Chip Antenna, with gains 5.0 dBi (5 GHz band) and 2.68 dBi (2.4 GHz band). Also adds Konstron Wi-Fi Flag antenna (P/N 730001001), with gains 4.9 dBi (5 GHz band) and 2.60 dBi (2.4 GHz band).

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Lantronix Canada, ULC.
7535 Irvine Center Drive, Suite 100
Irvine, CA 92618
United States

Date of Grant: 02/20/2019

Application Dated: 02/20/2019

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0232

Single Modular Approval. Output power listed is maximum conducted output power. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

Class II Permissive Change: Adds Chip Antenna, with gains 5.0 dBi (5 GHz band) and 2.68 dBi (2.4 GHz band). Also adds Konstron Wi-Fi Flag antenna (P/N 730001001), with gains 4.9 dBi (5 GHz band) and 2.60 dBi (2.4 GHz band).

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application MO5wVK0iOiTlRJRy3QS+Xw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 03/12/2020

Application Dated: 03/11/2020

Lantronix Canada, ULC.

7535 Irvine Center Drive, Suite 100

Irvine, CA 92618

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0 - 5240.0	0.08
38 CC MO	15E	5260.0 - 5320.0	0.0749
38 CC MO	15E	5500.0 - 5720.0	0.0501
38 CC MO	15E	5745.0 - 5825.0	0.0674

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. This filing meets the SAR threshold exclusion set forth in KDB 447498 and therefore can be used in mobile/portable configurations.

This change to request approval for the portable use category, specific to host eSight Corporation's head mounted device: Models: 300200x where x signifies the color of the case. The only difference between model numbers is the enclosure color.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Lantronix Canada, ULC.
7535 Irvine Center Drive, Suite 100
Irvine, CA 92618
United States

Date of Grant: 03/12/2020

Application Dated: 03/11/2020

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0 - 5240.0	0.08
38 CC MO	15E	5260.0 - 5320.0	0.0749
38 CC MO	15E	5500.0 - 5720.0	0.0501
38 CC MO	15E	5745.0 - 5825.0	0.0674

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. This filing meets the SAR threshold exclusion set forth in KDB 447498 and therefore can be used in mobile/portable configurations.

This change to request approval for the portable use category, specific to host eSight Corporation's head mounted device: Models: 300200x where x signifies the color of the case. The only difference between model numbers is the enclosure color.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application m2As41/MRZhH++1c6wj21Q==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 11/01/2016

Application Dated: 10/31/2016

Intrinsyc Technologies Corporation

885 Dunsmuir St Suite 300

Vancouver, V6C1N5
Canada

Attention: George Reznik , CFO

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Intrinsyc Technologies Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0 - 5240.0	0.08
38 CC MO	15E	5260.0 - 5320.0	0.0749
38 CC MO	15E	5500.0 - 5720.0	0.0501
38 CC MO	15E	5745.0 - 5825.0	0.0674

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

This change is to request approval for portable category specific host eSight Corporation head mounted display.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intrinsyc Technologies Corporation
885 Dunsmuir St Suite 300
Vancouver, V6C1N5
Canada

Date of Grant: 11/01/2016

Application Dated: 10/31/2016

Attention: George Reznik , CFO

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Intrinsyc Technologies Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0 - 5240.0	0.08
38 CC MO	15E	5260.0 - 5320.0	0.0749
38 CC MO	15E	5500.0 - 5720.0	0.0501
38 CC MO	15E	5745.0 - 5825.0	0.0674

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

This change is to request approval for portable category specific host eSight Corporation head mounted display.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application j4Ia1NrSr5N5PbAfqaOAqw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 11/01/2016

Application Dated: 10/31/2016

Intrinsyc Technologies Corporation

885 Dunsmuir St Suite 300

Vancouver, V6C1N5
Canada

Attention: George Reznik , CFO

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Intrinsyc Technologies Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.002
CO MO	15C	2412.0 - 2462.0	0.485
CC MO	15C	2422.0 - 2452.0	0.205

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

This change is to request approval for portable category specific host eSight Corporation head mounted display.

CC:	This device is certified pursuant to two different Part 15 rules sections.
CO:	Transmitter meets technical requirements only for use at coast stations.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intrinsyc Technologies Corporation
885 Dunsmuir St Suite 300
Vancouver, V6C1N5
Canada

Date of Grant: 11/01/2016

Application Dated: 10/31/2016

Attention: George Reznik , CFO

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Intrinsyc Technologies Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.002
CO MO	15C	2412.0 - 2462.0	0.485
CC MO	15C	2422.0 - 2452.0	0.205

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

This change is to request approval for portable category specific host eSight Corporation head mounted display.

CC:	This device is certified pursuant to two different Part 15 rules sections.
CO:	Transmitter meets technical requirements only for use at coast stations.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application Ii5nG8QbPdfwz1BhSjM2Pw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 12/10/2015

Application Dated: 12/09/2015

Lantronix Canada, ULC.

7535 Irvine Center Drive, Suite 100

Irvine, CA 92618

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15B	-

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Lantronix Canada, ULC.
7535 Irvine Center Drive, Suite 100
Irvine, CA 92618
United States

Date of Grant: 12/10/2015

Application Dated: 12/09/2015

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15B	-

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application hHTkcTQxvIhyjmDLw8blSg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 11/01/2016

Application Dated: 10/31/2016

Intrinsyc Technologies Corporation

885 Dunsmuir St Suite 300

Vancouver, V6C1N5
Canada

Attention: George Reznik , CFO

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Intrinsyc Technologies Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.015

Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

This change is to request approval for portable category specific host eSight Corporation head mounted display.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intrinsyc Technologies Corporation
885 Dunsmuir St Suite 300
Vancouver, V6C1N5
Canada

Date of Grant: 11/01/2016

Application Dated: 10/31/2016

Attention: George Reznik , CFO

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Intrinsyc Technologies Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.015

Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

This change is to request approval for portable category specific host eSight Corporation head mounted display.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application bsUFYcPbl/ecjZ4tPwrV1A==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 12/10/2015

Application Dated: 12/09/2015

Lantronix Canada, ULC.

7535 Irvine Center Drive, Suite 100

Irvine, CA 92618

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.15

Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Lantronix Canada, ULC.
7535 Irvine Center Drive, Suite 100
Irvine, CA 92618
United States

Date of Grant: 12/10/2015

Application Dated: 12/09/2015

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.15

Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 8RE8pssu7x5XRyAEU3tAyg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566

Date of Grant: 03/16/2022

Application Dated: 03/16/2022

Lantronix Canada, ULC.

7535 Irvine Center Drive, Suite 100

Irvine, CA 92618

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	InFlyt Wireless Mode Controller
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0 - 5240.0	0.025
38 CC MO	15E	5260.0 - 5320.0	0.027
38 CC MO	15E	5500.0 - 5720.0	0.025
38 CC MO	15E	5745.0 - 5825.0	0.02

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. This filing meets the SAR threshold exclusion set forth in KDB 447498 and therefore can be used in mobile/portable configurations.

This change to request approval for the portable use category, specific to host Thales InFlyt Wireless Mode Controller using three antenna configurations at reduced power.

Maximum SAR value @ 0mm spacing: 1.43W/kg

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Lantronix Canada, ULC.
7535 Irvine Center Drive, Suite 100
Irvine, CA 92618
United States

Date of Grant: 03/16/2022

Application Dated: 03/16/2022

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	InFlyt Wireless Mode Controller
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0 - 5240.0	0.025
38 CC MO	15E	5260.0 - 5320.0	0.027
38 CC MO	15E	5500.0 - 5720.0	0.025
38 CC MO	15E	5745.0 - 5825.0	0.02

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. This filing meets the SAR threshold exclusion set forth in KDB 447498 and therefore can be used in mobile/portable configurations.

This change to request approval for the portable use category, specific to host Thales InFlyt Wireless Mode Controller using three antenna configurations at reduced power.

Maximum SAR value @ 0mm spacing: 1.43W/kg

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 6qJdBqjoUUYG+M4Eh36hpA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 02/20/2019

Application Dated: 02/20/2019

Lantronix Canada, ULC.

7535 Irvine Center Drive, Suite 100

Irvine, CA 92618

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Digital Transmission System
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.0078
CC MO	15C	2412.0 - 2462.0	0.251

Single Modular Approval. Output power listed is maximum combined conducted output power. This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

Class II Permissive Change: Adds Chip Antenna, with gains 5.0 dBi (5 GHz band) and 2.68 dBi (2.4 GHz band). Also adds Konstron Wi-Fi Flag antenna (P/N 730001001), with gains 4.9 dBi (5 GHz band) and 2.60 dBi (2.4 GHz band).

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Lantronix Canada, ULC.
7535 Irvine Center Drive, Suite 100
Irvine, CA 92618
United States

Date of Grant: 02/20/2019

Application Dated: 02/20/2019

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Digital Transmission System
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.0078
CC MO	15C	2412.0 - 2462.0	0.251

Single Modular Approval. Output power listed is maximum combined conducted output power. This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

Class II Permissive Change: Adds Chip Antenna, with gains 5.0 dBi (5 GHz band) and 2.68 dBi (2.4 GHz band). Also adds Konstron Wi-Fi Flag antenna (P/N 730001001), with gains 4.9 dBi (5 GHz band) and 2.60 dBi (2.4 GHz band).

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 21apa0Gi2exEYP5JePO2yA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 02/01/2017

Application Dated: 02/01/2017

Lantronix Canada, ULC.

7535 Irvine Center Drive, Suite 100

Irvine, CA 92618

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11 A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0081

Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Lantronix Canada, ULC.
7535 Irvine Center Drive, Suite 100
Irvine, CA 92618
United States

Date of Grant: 02/01/2017

Application Dated: 02/01/2017

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11 A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0081

Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 0YqcI5b+kI+StIWvzzhlfQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 12/10/2015

Application Dated: 12/09/2015

Lantronix Canada, ULC.

7535 Irvine Center Drive, Suite 100

Irvine, CA 92618

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0 - 5240.0	0.08
38 CC MO	15E	5260.0 - 5320.0	0.0749
38 CC MO	15E	5500.0 - 5720.0	0.0501
38 CC MO	15E	5745.0 - 5825.0	0.0674

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Lantronix Canada, ULC.
7535 Irvine Center Drive, Suite 100
Irvine, CA 92618
United States

Date of Grant: 12/10/2015

Application Dated: 12/09/2015

Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFDI-ITCNFA324

Name of Grantee:	Lantronix Canada, ULC.

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11A/B/G/N/AC WiFi + Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0 - 5240.0	0.08
38 CC MO	15E	5260.0 - 5320.0	0.0749
38 CC MO	15E	5500.0 - 5720.0	0.0501
38 CC MO	15E	5745.0 - 5825.0	0.0674

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:

InFlyt Wireless Mode Controller

by Lantronix Canada, ULC.

Grantee Code: 2AFDI Product Code: ITCNFA324

Latest application date: 2022-03-16

Device Images

FCC ID Device Details

Operating Frequencies

Exhibits

Application Information

Applications

Equipment Authorization

Grants

TCB Grant - Application zmqe06NKDzEoK5B2PquuOQ==

EAS Grant - Application zmqe06NKDzEoK5B2PquuOQ==

TCB Grant - Application WNTeTOjKJIvaQMaOH4qSEQ==

EAS Grant - Application WNTeTOjKJIvaQMaOH4qSEQ==

TCB Grant - Application v+rZj4l3pDc2g7Dc/YMLhw==

EAS Grant - Application v+rZj4l3pDc2g7Dc/YMLhw==

TCB Grant - Application uMCHyPdX89gdbfFposoFdQ==

EAS Grant - Application uMCHyPdX89gdbfFposoFdQ==

TCB Grant - Application tCT4G8xvcyxcKevkHlu25g==

EAS Grant - Application tCT4G8xvcyxcKevkHlu25g==

TCB Grant - Application R57j6xJFJxjY+cY4+bdo6Q==

EAS Grant - Application R57j6xJFJxjY+cY4+bdo6Q==

TCB Grant - Application p4myGt2N5CXidCvGB5ESDQ==

EAS Grant - Application p4myGt2N5CXidCvGB5ESDQ==

TCB Grant - Application NrlrVcGh804RZVsLZdq8ww==

EAS Grant - Application NrlrVcGh804RZVsLZdq8ww==

TCB Grant - Application nLsV00qOSJ1BDv6kzkk9Sg==

EAS Grant - Application nLsV00qOSJ1BDv6kzkk9Sg==

TCB Grant - Application MO5wVK0iOiTlRJRy3QS+Xw==

EAS Grant - Application MO5wVK0iOiTlRJRy3QS+Xw==

TCB Grant - Application m2As41/MRZhH++1c6wj21Q==

EAS Grant - Application m2As41/MRZhH++1c6wj21Q==

TCB Grant - Application j4Ia1NrSr5N5PbAfqaOAqw==

EAS Grant - Application j4Ia1NrSr5N5PbAfqaOAqw==

TCB Grant - Application Ii5nG8QbPdfwz1BhSjM2Pw==

EAS Grant - Application Ii5nG8QbPdfwz1BhSjM2Pw==

TCB Grant - Application hHTkcTQxvIhyjmDLw8blSg==

EAS Grant - Application hHTkcTQxvIhyjmDLw8blSg==

TCB Grant - Application bsUFYcPbl/ecjZ4tPwrV1A==

EAS Grant - Application bsUFYcPbl/ecjZ4tPwrV1A==

TCB Grant - Application 8RE8pssu7x5XRyAEU3tAyg==

EAS Grant - Application 8RE8pssu7x5XRyAEU3tAyg==

TCB Grant - Application 6qJdBqjoUUYG+M4Eh36hpA==

EAS Grant - Application 6qJdBqjoUUYG+M4Eh36hpA==

TCB Grant - Application 21apa0Gi2exEYP5JePO2yA==

EAS Grant - Application 21apa0Gi2exEYP5JePO2yA==

TCB Grant - Application 0YqcI5b+kI+StIWvzzhlfQ==

EAS Grant - Application 0YqcI5b+kI+StIWvzzhlfQ==