FCC ID 2AFI5TU-IS01

MINI PC

by Lenoge Technology Ltd.

Grantee Code: 2AFI5   Product Code: TUIS01
Latest application date: 2015-10-09

Device Images

FCC ID Device Details

FCC ID2AFI5TU-IS01
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AFI5
Product CodeTUIS01
Applicant BusinessLenoge Technology Ltd. 🇨🇳
Related Domains xiehekong.com
Equipment ClassMINI PC
Test FirmShenzhen Toby Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2015-10-09
2402-2480 MHzOriginal Equipment2015-10-09

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2015-10-09PDF 785.3 KB
Manual r1Users Manual2015-10-09PDF 785.3 KB
Int 1Internal Photos2015-10-09PDF 4.2 MB
Int 2Internal Photos2015-10-09PDF 2.7 MB
ExtExternal Photos2015-10-09PDF 4.1 MB
LabelID Label/Location Info2015-10-09PDF 1 MB
SetupTest Setup Photos2015-10-09PDF 2.8 MB
DSS Part 1Test Report2015-10-09PDF 5.7 MB
DSS Part 2Test Report2015-10-09PDF 4.9 MB
DSS Part 3Test Report2015-10-09PDF 4.4 MB
DTS BLETest Report2015-10-09PDF 2 MB
DTS WiFi 1Test Report2015-10-09PDF 5.6 MB
DTS WiFi 2Test Report2015-10-09PDF 3.7 MB
AuthorizationCover Letter(s)2015-10-09PDF 71.3 KB
ConfidCover Letter(s)2015-10-09PDF 122.3 KB
DofCCover Letter(s)2015-10-09PDF 125.3 KB
RFxRF Exposure Info2015-10-09PDF 957.3 KB
Block Metadata onlyBlock DiagramPDF 74.8 KB
Schema Metadata onlySchematicsPDF 417.2 KB
Datasheet Metadata onlyOperational DescriptionPDF 526.6 KB
Ops Metadata onlyOperational DescriptionPDF 99.8 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 96.6 KB

Application Information

Application IDqMAsoMox2ENvYYexxx5CQA==
Final Action Date2015-10-09
Application PurposeOriginal Equipment
Applicant FRN0024788101
ModelTU-IS01
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionMINI PC
Responsible PartyXia Cao, Manager, caoxia@xiehekong.com , +86-755-82580048
Technical ContactMark Koop, Teleconformity, certification@micomlabs.com , (31)848395867
Test FirmJustin Zhang, Shenzhen Toby Technology Co., Ltd., toby888@tongbiao.com , 0086-755-26509301
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
qMAsoMox2ENvYYexxx5CQA==2015-10-09Original Equipment
7HacObLb+azV5OhvOVdF2g==2015-10-09Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.003800015C20, CC
2402-2480 MHz0.001415C20, CC
2412-2462 MHz0.009515C20, CC
2422-2452 MHz0.005915C20, CC

Grants

TCB Grant - Application qMAsoMox2ENvYYexxx5CQA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 10/09/2015

Application Dated: 10/09/2015
Lenoge Technology Ltd.
Room 24, 7/F. Nan Fung Commercial Centre,
19 Lam Lok Street, Kowloon Bay
Hong Kong,
China
 
Attention: Xia Cao , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFI5TU-IS01
Name of Grantee:  Lenoge Technology Ltd.
Equipment Class: Digital Transmission System
Notes: MINI PC
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 CC 15C 2412.0  -  2462.0 0.0095  
20 CC 15C 2422.0  -  2452.0 0.0059  
20 CC 15C 2402.0  -  2480.0 0.0014  

Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application qMAsoMox2ENvYYexxx5CQA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Lenoge Technology Ltd.
Room 24, 7/F. Nan Fung Commercial Centre, 19 Lam Lok Street, Kowloon Bay
Hong Kong,
China
  Date of Grant: 10/09/2015

Application Dated: 10/09/2015
 
Attention: Xia Cao , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFI5TU-IS01
Name of Grantee:  Lenoge Technology Ltd.
Equipment Class: Digital Transmission System
Notes: MINI PC
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 CC 15C 2412.0  -  2462.0 0.0095  
20 CC 15C 2422.0  -  2452.0 0.0059  
20 CC 15C 2402.0  -  2480.0 0.0014  

Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 7HacObLb+azV5OhvOVdF2g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 10/09/2015

Application Dated: 10/09/2015
Lenoge Technology Ltd.
Room 24, 7/F. Nan Fung Commercial Centre,
19 Lam Lok Street, Kowloon Bay
Hong Kong,
China
 
Attention: Xia Cao , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFI5TU-IS01
Name of Grantee:  Lenoge Technology Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: MINI PC
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 CC 15C 2402.0  -  2480.0 0.0038  

Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 7HacObLb+azV5OhvOVdF2g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Lenoge Technology Ltd.
Room 24, 7/F. Nan Fung Commercial Centre, 19 Lam Lok Street, Kowloon Bay
Hong Kong,
China
  Date of Grant: 10/09/2015

Application Dated: 10/09/2015
 
Attention: Xia Cao , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFI5TU-IS01
Name of Grantee:  Lenoge Technology Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: MINI PC
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 CC 15C 2402.0  -  2480.0 0.0038  

Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: