FCC ID 2AFIW-X3000NR

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024

Date of Grant: 05/28/2023 Application Dated: 05/18/2023

GL Technologies (Hong Kong) Limited

Unit 601, Building 5W

Hong Kong Science Park,

Shatin, N.T.,, Hong Kong

Attention: Alfie Zhao

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFIW-X3000NR
Name of Grantee:	GL Technologies (Hong Kong) Limited
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	5G NR Wi-Fi 6 Router

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.0687
CC MO	15E	5190.0  -  5230.0	0.0995
CC MO	15E	5210.0  -  5210.0	0.0841
CC MO ND	15E	5260.0  -  5320.0	0.1268
CC MO ND	15E	5270.0  -  5310.0	0.1076
CC MO ND	15E	5290.0  -  5290.0	0.0897
CC MO ND	15E	5500.0  -  5700.0	0.1225
CC MO ND	15E	5510.0  -  5670.0	0.1052
CC MO ND	15E	5530.0  -  5610.0	0.0971
CC MO	15E	5745.0  -  5825.0	0.1626
CC MO	15E	5755.0  -  5795.0	0.1282
CC MO	15E	5775.0  -  5775.0	0.1125
CC MO ND	15E	5250.0  -  5250.0	0.0421
CC MO ND	15E	5570.0  -  5570.0	0.0509

Power Output listed is conducted. Device is an 802.11 a/n/ac/ax device in a 3x3 Spatial Multiplexing MIMO configuration and enabled for 5 GHz band operation as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

GL Technologies (Hong Kong) Limited Unit 601, Building 5W Hong Kong Science Park, Shatin, N.T.,, Hong Kong

Date of Grant: 05/28/2023 Application Dated: 05/18/2023

Attention: Alfie Zhao

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFIW-X3000NR
Name of Grantee:	GL Technologies (Hong Kong) Limited
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	5G NR Wi-Fi 6 Router
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.0687
CC MO	15E	5190.0  -  5230.0	0.0995
CC MO	15E	5210.0  -  5210.0	0.0841
CC MO ND	15E	5260.0  -  5320.0	0.1268
CC MO ND	15E	5270.0  -  5310.0	0.1076
CC MO ND	15E	5290.0  -  5290.0	0.0897
CC MO ND	15E	5500.0  -  5700.0	0.1225
CC MO ND	15E	5510.0  -  5670.0	0.1052
CC MO ND	15E	5530.0  -  5610.0	0.0971
CC MO	15E	5745.0  -  5825.0	0.1626
CC MO	15E	5755.0  -  5795.0	0.1282
CC MO	15E	5775.0  -  5775.0	0.1125
CC MO ND	15E	5250.0  -  5250.0	0.0421
CC MO ND	15E	5570.0  -  5570.0	0.0509

Power Output listed is conducted. Device is an 802.11 a/n/ac/ax device in a 3x3 Spatial Multiplexing MIMO configuration and enabled for 5 GHz band operation as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application NsojNvelHx45VvWW+OFxxQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024

Date of Grant: 05/28/2023 Application Dated: 05/18/2023

GL Technologies (Hong Kong) Limited

Unit 601, Building 5W

Hong Kong Science Park,

Shatin, N.T.,, Hong Kong

Attention: Alfie Zhao

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFIW-X3000NR
Name of Grantee:	GL Technologies (Hong Kong) Limited
Equipment Class:	Digital Transmission System
Notes:	5G NR Wi-Fi 6 Router

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.076
CC MO	15C	2422.0  -  2452.0	0.069

Output Power listed is conducted. Device is an 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for 2.4 GHz band operation as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device supports 20MHz and 40MHz bandwidth modes.

Output Power listed is conducted. Device is an 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for 2.4 GHz band operation as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device supports 20MHz and 40MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

GL Technologies (Hong Kong) Limited Unit 601, Building 5W Hong Kong Science Park, Shatin, N.T.,, Hong Kong

Date of Grant: 05/28/2023 Application Dated: 05/18/2023

Attention: Alfie Zhao

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AFIW-X3000NR
Name of Grantee:	GL Technologies (Hong Kong) Limited
Equipment Class:	Digital Transmission System
Notes:	5G NR Wi-Fi 6 Router
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.076
CC MO	15C	2422.0  -  2452.0	0.069

Output Power listed is conducted. Device is an 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for 2.4 GHz band operation as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device supports 20MHz and 40MHz bandwidth modes.

Output Power listed is conducted. Device is an 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for 2.4 GHz band operation as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device supports 20MHz and 40MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: