An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product.
For example, the grantee code for FCC ID: 2AFK4-ISN1 is 2AFK4. The remaining characters of the FCC ID, -ISN1, are often associated with the product model, but they can be random. These letters are chosen by the applicant.
In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.
Application for Equipment Authorization FCC Form 731 TCB Version
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Applications are submitted for FCC ID and Grant requests. Click an above application to view details
Timco Engineering, Inc.
849 NW State Road 45
<BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 12/23/2015
Application Dated: 12/23/2015
C2Ag, LLC
207 S Main Street
P.O. Box 315,
Archie, MO 64725
Attention: Don Schaefer , Chief Technology Office
NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
FCC IDENTIFIER:
2AFK4-ISN1
Name of Grantee:
C2Ag, LLC
Equipment Class:
Part 15 Spread Spectrum Transmitter
Notes:
FHSS Transmitter module
Modular Type:
Limited Single Modular
Grant Notes
FCC Rule Parts
Frequency Range (MHZ)
Output Watts
Frequency Tolerance
Emission Designator
15C
903.1
-
926.85
0.99
15C
2402.0
-
2480.0
0.007
Limited Single Modular Approval. Approval is limited to installation in C2Ag, LLC products only. Compliance of this device in all final host configurations is the responsibility of the Grantee. C2Ag, LLC must ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antennas used with this device must only be the antennas that were tested in preparation of this application. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
COPY
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION
COPY
Certification
C2Ag, LLC
207 S Main Street
P.O. Box 315,
Archie, MO 64725
United States
Date of Grant: 12/23/2015
Application Dated: 12/23/2015
Attention: Don Schaefer , Chief Technology Office
NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
FCC IDENTIFIER:
2AFK4-ISN1
Name of Grantee:
C2Ag, LLC
Equipment Class:
Part 15 Spread Spectrum Transmitter
Notes:
FHSS Transmitter module
Modular Type:
Limited Single Modular
Grant Notes
FCC Rule Parts
Frequency Range (MHZ)
Output Watts
Frequency Tolerance
Emission Designator
15C
903.1
-
926.85
0.99
15C
2402.0
-
2480.0
0.007
Limited Single Modular Approval. Approval is limited to installation in C2Ag, LLC products only. Compliance of this device in all final host configurations is the responsibility of the Grantee. C2Ag, LLC must ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antennas used with this device must only be the antennas that were tested in preparation of this application. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
Mail To:
EA702627
Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details