FCC ID 2AFTI-WEN9

902-928 MHz wireless module

by Digital Six Laboratories LLC

Grantee Code: 2AFTI   Product Code: WEN9
Latest application date: 2018-07-11

FCC ID Device Details

FCC ID2AFTI-WEN9
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AFTI
Product CodeWEN9
Applicant BusinessDigital Six Laboratories LLC 🇺🇸
Related Domains d6labs.com
Equipment Class902-928 MHz wireless module
Test FirmNebraska Center for Excellence in Electronics

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
905.38-925.48 MHzOriginal Equipment2018-07-11

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2018-07-11PDF 795.2 KB
User Manual R4Users Manual2018-07-11PDF 799.1 KB
Internal PhotosInternal Photos2018-07-11PDF 414.5 KB
External PhotosExternal Photos2018-07-11PDF 415.4 KB
Labels and LocationsID Label/Location Info2018-07-11PDF 492.9 KB
Test Setup PhotosTest Setup Photos2018-07-11PDF 611.3 KB
Test Report DTSTest Report2018-07-11PDF 1.3 MB
Authorization LetterCover Letter(s)2018-07-11PDF 328.4 KB
Confidentiality LetterCover Letter(s)2018-07-11PDF 185.8 KB
Module Approval LetterCover Letter(s)2018-07-11PDF 182.6 KB
RF Exposure InfoRF Exposure Info2018-07-11PDF 268.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 144.4 KB
Schematics Metadata onlySchematicsPDF 223.9 KB
Description Theory of Operation Metadata onlyOperational DescriptionPDF 482.9 KB

Application Information

Application IDnYckDNCdefMgX4jhHN5eDg==
Final Action Date2018-07-11
Application PurposeOriginal Equipment
Applicant FRN0024869752
ModelWEN9
Frequency Range905.38-925.48 MHz
Equipment ClassDTS - Digital Transmission System
Device Description902-928 MHz wireless module
Responsible PartySteve Montgomery, CEO, stevetherfguy@d6labs.com , 405-593-1242
Technical ContactSteve Montgomery, Digital Six Laboratories LLC, stevetherfguy@d6labs.com , 9405931242
Test FirmNic Johnson, Nebraska Center for Excellence in Electronics, njohnson@nceelabs.com , 4023236233
TCB EmailHotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits at the distance 20cm as specified in the filing; therefore, this device may be used in mobile configurations. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF exposure compliance. Use of the modules pin to an external antenna requires the applicant to file a Class II Permissive Change or new application as appropriate.

Applications

Application IDDatePurpose
nYckDNCdefMgX4jhHN5eDg==2018-07-11Original Equipment

Equipment Authorization

FrequencyOutputRules
905.38-925.48 MHz0.010000015C

Grants

TCB Grant - Application nYckDNCdefMgX4jhHN5eDg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 07/11/2018

Application Dated: 07/06/2018
Digital Six Laboratories LLC
414 Ash Ave
Yukon, OK 73099
 
Attention: Steve Montgomery , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFTI-WEN9
Name of Grantee:  Digital Six Laboratories LLC
Equipment Class: Digital Transmission System
Notes: 902-928 MHz wireless module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 905.38  -  925.48 0.01  

Output power listed is conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits at the distance 20cm as specified in the filing; therefore, this device may be used in mobile configurations. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF exposure compliance. Use of the modules pin to an external antenna requires the applicant to file a Class II Permissive Change or new application as appropriate.

EAS Grant - Application nYckDNCdefMgX4jhHN5eDg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Digital Six Laboratories LLC
414 Ash Ave
Yukon, OK 73099
United States
  Date of Grant: 07/11/2018

Application Dated: 07/06/2018
 
Attention: Steve Montgomery , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFTI-WEN9
Name of Grantee:  Digital Six Laboratories LLC
Equipment Class: Digital Transmission System
Notes: 902-928 MHz wireless module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 905.38  -  925.48 0.01  

Output power listed is conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits at the distance 20cm as specified in the filing; therefore, this device may be used in mobile configurations. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF exposure compliance. Use of the modules pin to an external antenna requires the applicant to file a Class II Permissive Change or new application as appropriate.



Mail To: