FCC ID 2AFTLSH1
Digital Transmission System
by ecoVent Corp.
Grantee Code: 2AFTL Product Code: SH1
Latest application date: 2015-12-15
FCC ID Device Details
| FCC ID | 2AFTLSH1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AFTL |
| Product Code | SH1 |
| Applicant Business | ecoVent Corp. 🇺🇸 |
| Related Domains |  ecoventsystems.com |
| Equipment Class | Digital Transmission System |
| Test Firm | BUREAU VERITAS CONSUMER PRODUCTS SERVICES, INC. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 904-926 MHz | Class II permissive change or modification of presently authorized equipment | 2015-12-15 |
| 915 MHz | Original Equipment | 2015-11-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Ecovent Manual (draft only).pdf | Users Manual | 2016-05-09 | PDF 4.1 MB |
| Internal Photo 1.pdf | Internal Photos | 2016-05-09 | PDF 892.5 KB |
| Internal Photo 2.pdf | Internal Photos | 2016-05-09 | PDF 102.7 KB |
| External Photo 1.pdf | External Photos | 2016-05-09 | PDF 267.8 KB |
| External Photo 2.pdf | External Photos | 2016-05-09 | PDF 879.4 KB |
| Labels Dimension Location and Material.pdf | ID Label/Location Info | 2015-11-11 | PDF 298.7 KB |
| Test Set up photo.pdf | Test Setup Photos | 2016-06-12 | PDF 514.1 KB |
| Test Set up Photo updated.pdf | Test Setup Photos | 2016-05-09 | PDF 794.6 KB |
| Test report.pdf | Test Report | 2015-12-15 | PDF 635.6 KB |
| EP2231-4 FCC Report (Control Module - 915 MHz) (Updated - No IC Filling) (Update | Test Report | 2015-11-11 | PDF 662.1 KB |
| Cover letter_C2PC Cover Letter.pdf | Cover Letter(s) | 2015-12-15 | PDF 25.5 KB |
| Request for Confidentiality.pdf | Cover Letter(s) | 2015-12-15 | PDF 505.5 KB |
| Cover Letter of Agency for FCC.pdf | Cover Letter(s) | 2015-11-11 | PDF 483.1 KB |
| Request for Confidentiality for FCC.pdf | Cover Letter(s) | 2015-11-11 | PDF 509.6 KB |
| RF exposure_MPE calculation updated.pdf | RF Exposure Info | 2015-11-11 | PDF 185.3 KB |
| Block Diagram.pdf Metadata only | Block Diagram | PDF 164 KB | |
| Control Module Schematic.PDF Metadata only | Schematics | PDF 3.6 MB | |
| Operational Description 1_Control Hub Technical.pdf Metadata only | Operational Description | PDF 380.7 KB | |
| Operational description 2_Antenna Spec for Control Module.pdf Metadata only | Operational Description | PDF 102.6 KB |
Application Information
| Application ID | 8MmtYH1mXEQvceDtqZw2sA== |
|---|---|
| Final Action Date | 2015-12-15 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0024870743 |
| Model | SH1 |
| Frequency Range | 904-926 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Digital Transmission System |
| Responsible Party | Robert Kim, Director of Electrical Engineering, rob@ecoventsystems.com , 8572044466 |
| Agent | Christopher Christopher Christopher, Curtis-Straus LLC |
| Test Firm | Dori Robertson, BUREAU VERITAS CONSUMER PRODUCTS SERVICES, INC., dolores.robertson@us.bureauveritas.com  , 978 486 8880 |
| TCB Email | certification@curtis-straus.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 06/12/2016 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. This device must be installed to provide a separation distance of at least 20cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. Class II Permissive change as described in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 8MmtYH1mXEQvceDtqZw2sA== | 2015-12-15 | Class II permissive change or modification of presently authorized equipment |
| cgOjhCG54X5rVLg+wf1jPw== | 2015-11-11 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application cgOjhCG54X5rVLg+wf1jPw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 11/11/2015 Application Dated: 11/11/2015 |
| ecoVent Corp. |
| 24 Cambridge St |
| Suite 6 |
| Charlestown, MA 02129 |
| Attention: Robert Kim , Director of Electrical Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AFTLSH1 |
| Name of Grantee: | ecoVent Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | Digital Transmission System |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 915.0 - 915.0 | 0.0269153 |
| Output power listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application cgOjhCG54X5rVLg+wf1jPw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ecoVent Corp. 24 Cambridge St Suite 6 Charlestown, MA 02129 United States |
Date of Grant: 11/11/2015 Application Dated: 11/11/2015 |
| Attention: Robert Kim , Director of Electrical Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AFTLSH1 |
| Name of Grantee: | ecoVent Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | Digital Transmission System |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 915.0 - 915.0 | 0.0269153 |
| Output power listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 12/15/2015 Application Dated: 12/15/2015 |
| ecoVent Corp. |
| 24 Cambridge St |
| Suite 6 |
| Charlestown, MA 02129 |
| Attention: Robert Kim , Director of Electrical Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AFTLSH1 |
| Name of Grantee: | ecoVent Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | Digital Transmission System |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 904.0 - 926.0 | 0.0263633 |
| Output power listed is conducted. This device must be installed to provide a separation distance of at least 20cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. Class II Permissive change as described in this filing. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application 8MmtYH1mXEQvceDtqZw2sA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ecoVent Corp. 24 Cambridge St Suite 6 Charlestown, MA 02129 United States |
Date of Grant: 12/15/2015 Application Dated: 12/15/2015 |
| Attention: Robert Kim , Director of Electrical Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AFTLSH1 |
| Name of Grantee: | ecoVent Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | Digital Transmission System |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 904.0 - 926.0 | 0.0263633 |
| Output power listed is conducted. This device must be installed to provide a separation distance of at least 20cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. Class II Permissive change as described in this filing. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: |