FCC ID 2AFZZJ19CG

Mobile Phone (LTE/WCDMA/GSM/BT/WIFI)

by Xiaomi Communications Co., Ltd.

Grantee Code: 2AFZZ   Product Code: J19CG
Latest application date: 2020-11-26

FCC ID Device Details

FCC ID2AFZZJ19CG
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AFZZ
Product CodeJ19CG
Applicant BusinessXiaomi Communications Co., Ltd. 🇨🇳
Related Domains xiaomi.com
Equipment ClassMobile Phone (LTE/WCDMA/GSM/BT/WIFI)
Test FirmSGS-CSTC Standards Technical Services Co., Ltd

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.2-848.8 MHzClass II permissive change or modification of presently authorized equipment2020-11-26
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-11-26
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-11-26
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-11-26
5180-5240 MHzOriginal Equipment2020-11-23
824.2-848.8 MHzOriginal Equipment2020-11-23
2402-2480 MHzOriginal Equipment2020-11-23
2402-2480 MHzOriginal Equipment2020-11-23

Exhibits

DocumentTypeAvailableFile
User manual_J19SGUsers Manual2021-05-26PDF 5.3 MB
User manual_J19STUsers Manual2021-05-26PDF 1.2 MB
User manual_M2010J19CGUsers Manual2021-05-23PDF 5.3 MB
User manual_M2010J19CTUsers Manual2021-05-23PDF 1.1 MB
Appendix A.2-Internal PhotosInternal Photos2021-05-26PDF 2.5 MB
Appendix A.2-Internal PhotosInternal Photos2021-05-23PDF 2.9 MB
Appendix A.1-External PhotosExternal Photos2021-05-26PDF 1.1 MB
Appendix A.1-External PhotosExternal Photos2021-05-23PDF 1.3 MB
E-labelID Label/Location Info2020-11-26PDF 397.2 KB
E-labelID Label/Location Info2020-11-23PDF 346.2 KB
Justification Letter_2AFZZJ19CG_C2PCBlock Diagram2020-11-26PDF 18.6 KB
AR20209001005-FCC 5G WLAN RF Test Report_Part1Schematics2020-11-23PDF 4.2 MB
Appendix D Photographs-SARTest Setup Photos2021-05-26PDF 477.5 KB
DSS_DTS Setup PhotosTest Setup Photos2021-05-26PDF 534.8 KB
JBP SetupTest Setup Photos2021-05-26PDF 479 KB
NII Setup Photos-Test Setup Photos2021-05-26PDF 724 KB
PCE_Setup PhotosTest Setup Photos2021-05-26PDF 440.7 KB
Appendix D Photographs_SARTest Setup Photos2021-05-23PDF 556.3 KB
DSS_DTS Setup PhotosTest Setup Photos2021-05-23PDF 461.1 KB
JBP SetupTest Setup Photos2021-05-23PDF 405.3 KB
NII Setup Photos-Test Setup Photos2021-05-23PDF 650.3 KB
PCE_Setup PhotosTest Setup Photos2021-05-23PDF 401.6 KB
PCE_Setup Photos_0608Test Setup Photos2020-11-26PDF 393.3 KB
PCE_Setup Photos_0608Test Setup Photos2020-11-23PDF 315.4 KB
AR2020A000701-01-FCC RF TEST REPORT_0608Test Report2020-11-26PDF 833 KB
AR2020A000701-FCC LTETest Report2020-11-26PDF 1.4 MB
AR2020A000702-FCC 2.4G WLANTest Report2020-11-26PDF 5.1 MB
AR2020A000702-FCC 2.4G WLAN RF Test ReportTest Report2020-11-26PDF 5 MB
AR2020A000703-FCC BLETest Report2020-11-26PDF 3.1 MB
AR2020A000703-FCC Bluetooth BLE RF Test ReportTest Report2020-11-26PDF 3 MB
AR2020A000704-FCC BluetoothTest Report2020-11-26PDF 3.8 MB
AR2020A000704-FCC Bluetooth RF Test ReportTest Report2020-11-26PDF 3.6 MB
AR2020A000705-FCC 5G WLAN RF Test Report_Part1Test Report2020-11-26PDF 4.2 MB
AR2020A000705-FCC 5G WLAN RF Test Report_Part2Test Report2020-11-26PDF 4.2 MB
AR2020A000705-FCC 5G WLAN RF Test Report_Part3Test Report2020-11-26PDF 5.2 MB
AR2020A000705-FCC 5G WLAN RF Test Report_Part4Test Report2020-11-26PDF 5.1 MB
AR2020A000705-FCC 5G WLAN RF Test Report_Part5Test Report2020-11-26PDF 2.8 MB
AR2020A000705-FCC 5G WLAN_Part 1Test Report2020-11-26PDF 4.3 MB
AR2020A000705-FCC 5G WLAN_Part 2Test Report2020-11-26PDF 3.8 MB
AR2020A000705-FCC 5G WLAN_Part 3Test Report2020-11-26PDF 3.3 MB
AR2020A000705-FCC 5G WLAN_Part 4Test Report2020-11-26PDF 3.3 MB
AR2020A000705-FCC 5G WLAN_Part 5Test Report2020-11-26PDF 5 MB
AR2020A000706-01-FCC 15B Test Report_0608Test Report2020-11-26PDF 893.6 KB
AR2020A000706-FCC 15B Test ReportTest Report2020-11-26PDF 1.2 MB
Appendix B.1 -GSMTest Report2020-11-26PDF 2.7 MB
Appendix B.1 -GSM_0608Test Report2020-11-26PDF 2.6 MB
Appendix B.10 -LTE CA_38CTest Report2020-11-26PDF 2.9 MB
Appendix B.10 -LTE CA_38C_0608Test Report2020-11-26PDF 5.1 MB
Appendix B.2 -WCDMATest Report2020-11-26PDF 2.3 MB
Appendix B.2 -WCDMA_0608Test Report2020-11-26PDF 2.2 MB
Appendix B.3 -LTE Band2Test Report2020-11-26PDF 4.5 MB
Appendix B.3 -LTE Band2_0608Test Report2020-11-26PDF 5.3 MB
Appendix B.4 -LTE Band4Test Report2020-11-26PDF 4.5 MB
Appendix B.4 -LTE Band4_0608Test Report2020-11-26PDF 5.3 MB
Appendix B.5 -LTE Band5Test Report2020-11-26PDF 4.5 MB
Appendix B.5 -LTE Band5_0608Test Report2020-11-26PDF 4.5 MB
Appendix B.6 -LTE Band7Test Report2020-11-26PDF 4.7 MB
Appendix B.6 -LTE Band7_0608Test Report2020-11-26PDF 4.8 MB
Appendix B.7 -LTE Band38Test Report2020-11-26PDF 4.8 MB
Appendix B.7 -LTE Band38_0608Test Report2020-11-26PDF 4.9 MB
Appendix B.8 -LTE Band41Test Report2020-11-26PDF 4.7 MB
Appendix B.8 -LTE Band41_0608Test Report2020-11-26PDF 4.9 MB
Appendix B.9 -LTE CA_7CTest Report2020-11-26PDF 5.3 MB
Appendix B.9 -LTE CA_7C_0608Test Report2020-11-26PDF 5.5 MB
AR20209001001-01-FCC RF TEST REPORT_0608Test Report2020-11-23PDF 948.7 KB
AR20209001001-FCC WWAN TEST REPORTTest Report2020-11-23PDF 1.2 MB
AR20209001002-FCC 2.4G WLAN RF Test ReportTest Report2020-11-23PDF 4.8 MB
AR20209001003-FCC Bluetooth BLE RF Test ReportTest Report2020-11-23PDF 2.7 MB
AR20209001004-FCC Bluetooth RF Test ReportTest Report2020-11-23PDF 3.3 MB
AR20209001005-FCC 5G WLAN RF Test Report-Auto-Single_Part 1Test Report2020-11-23PDF 4.4 MB
AR20209001005-FCC 5G WLAN RF Test Report-Auto-Single_Part 2Test Report2020-11-23PDF 3.8 MB
AR20209001005-FCC 5G WLAN RF Test Report-Auto-Single_Part 3Test Report2020-11-23PDF 3.3 MB
AR20209001005-FCC 5G WLAN RF Test Report-Auto-Single_Part 4Test Report2020-11-23PDF 3.3 MB
AR20209001005-FCC 5G WLAN RF Test Report-Auto-Single_Part 5Test Report2020-11-23PDF 3.4 MB
AR20209001005-FCC 5G WLAN RF Test Report-Auto-Single_Part 6Test Report2020-11-23PDF 1.4 MB
AR20209001005-FCC 5G WLAN RF Test Report_Part2Test Report2020-11-23PDF 4.2 MB
AR20209001005-FCC 5G WLAN RF Test Report_Part3Test Report2020-11-23PDF 5.2 MB
AR20209001005-FCC 5G WLAN RF Test Report_Part4Test Report2020-11-23PDF 5 MB
AR20209001005-FCC 5G WLAN RF Test Report_Part5Test Report2020-11-23PDF 2.5 MB
AR20209001006-01-FCC 15B Test Report_0608Test Report2020-11-23PDF 959.8 KB
AR20209001006-FCC 15B Test ReportTest Report2020-11-23PDF 911.1 KB
Appendix B.1 -GSMTest Report2020-11-23PDF 2.6 MB
Appendix B.1 -GSM_0608Test Report2020-11-23PDF 2.4 MB
Appendix B.10 -LTE CA_38CTest Report2020-11-23PDF 5.5 MB
Appendix B.10 -LTE CA_38C_0608Test Report2020-11-23PDF 2.9 MB
Appendix B.2 -WCDMATest Report2020-11-23PDF 2.2 MB
Appendix B.2 -WCDMA_0608Test Report2020-11-23PDF 2 MB
Appendix B.3 -LTE Band2Test Report2020-11-23PDF 5.2 MB
Appendix B.3 -LTE Band2_0608Test Report2020-11-23PDF 5.3 MB
Appendix B.4 -LTE Band4Test Report2020-11-23PDF 5.4 MB
Appendix B.4 -LTE Band4_0608Test Report2020-11-23PDF 5.3 MB
Appendix B.5 -LTE Band5Test Report2020-11-23PDF 4.6 MB
Appendix B.5 -LTE Band5_0608Test Report2020-11-23PDF 4.4 MB
Appendix B.6 -LTE Band7Test Report2020-11-23PDF 5 MB
Appendix B.6 -LTE Band7_0608Test Report2020-11-23PDF 4.8 MB
Appendix B.7 -LTE Band38Test Report2020-11-23PDF 5.1 MB
Appendix B.7 -LTE Band38_0608Test Report2020-11-23PDF 4.9 MB
Appendix B.8 -LTE Band41Test Report2020-11-23PDF 5 MB
Appendix B.8 -LTE Band41_0608Test Report2020-11-23PDF 4.9 MB
Appendix B.9 -LTE CA_7CTest Report2020-11-23PDF 5.8 MB
Appendix B.9 -LTE CA_7C_0608Test Report2020-11-23PDF 5.5 MB
Amendment Letter _2AFZZJ19CG_JBP-C2PC_0608Cover Letter(s)2020-11-26PDF 32.9 KB
Amendment Letter_2AFZZJ19CG-PCE-C2PC_0608Cover Letter(s)2020-11-26PDF 15.3 KB
Declaration of AuthorizationCover Letter(s)2020-11-26PDF 124.7 KB
FCC PCII change request cover letterCover Letter(s)2020-11-26PDF 68.8 KB
Justification Letter_2AFZZJ19CG_C2PCCover Letter(s)2020-11-26PDF 18.6 KB
Product Equality Declaration-J19SCover Letter(s)2020-11-26PDF 202.3 KB
StatementCover Letter(s)2020-11-26PDF 453.3 KB
confidential documentCover Letter(s)2020-11-26PDF 430.2 KB
Amendment Letter _2AFZZJ19CG_JBP_0608Cover Letter(s)2020-11-23PDF 32.9 KB
Amendment Letter_2AFZZJ19CG-PCE_0608Cover Letter(s)2020-11-23PDF 15 KB
Declaration of AuthorizationCover Letter(s)2020-11-23PDF 122.1 KB
Justification Letter_2AFZZJ19CGCover Letter(s)2020-11-23PDF 18.5 KB
Product Equality Declaration-J19C International version &J19C Thailand v...Cover Letter(s)2020-11-23PDF 125.5 KB
StatementCover Letter(s)2020-11-23PDF 449 KB
UNII_Declaration_LetterCover Letter(s)2020-11-23PDF 198.7 KB
confidential documentCover Letter(s)2020-11-23PDF 426.3 KB
AR2020A000707_ FCC SAR Report--_Part 1RF Exposure Info2020-11-26PDF 4.8 MB
AR2020A000707_ FCC SAR Report--_Part 2RF Exposure Info2020-11-26PDF 4.7 MB
AR2020A000707_ FCC SAR Report--_Part 3RF Exposure Info2020-11-26PDF 4.4 MB
AR2020A000707_ FCC SAR Report--_Part 4RF Exposure Info2020-11-26PDF 2.7 MB
AR20209001007_ FCC SAR Report---_Part 1RF Exposure Info2020-11-23PDF 4.8 MB
AR20209001007_ FCC SAR Report---_Part 2RF Exposure Info2020-11-23PDF 4.3 MB
AR20209001007_ FCC SAR Report---_Part 3RF Exposure Info2020-11-23PDF 3.3 MB
AR20209001007_ FCC SAR Report---_Part 4RF Exposure Info2020-11-23PDF 1.2 MB
Block Metadata onlyBlock DiagramPDF 112.9 KB
SCH Metadata onlySchematicsPDF 1.1 MB
OP Metadata onlyOperational DescriptionPDF 735.3 KB
OP_SAR SENSOR Metadata onlyOperational DescriptionPDF 1.2 MB
Operational Description Metadata onlyOperational DescriptionPDF 909.9 KB
SW Security Metadata onlyOperational DescriptionPDF 280.1 KB
SW Security Metadata onlyOperational DescriptionPDF 271.2 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 368.6 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 181.9 KB
Tune Up Metadata onlyParts List/Tune Up InfoPDF 964.7 KB

Application Information

Application IDvYgS4JRachm9IHRnwbGCaA==
Final Action Date2020-11-26
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0024904948
ModelJ19CG
Frequency Range824.2-848.8 MHz
Equipment ClassPCE - PCS Licensed Transmitter held to ear
Device DescriptionMobile Phone (LTE/WCDMA/GSM/BT/WIFI)
Responsible Partyhao sheng, mi-compliance@xiaomi.com , 010 6060 6666
Test FirmDerek Yang, SGS-CSTC Standards Technical Services Co., Ltd, Derek-WZ.yang@sgs.com , +86 0135 6484 8721
TCB Emailbentje.holger@phoenix-testlab.de
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date05/26/2021
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change for Camera module modification and model name addition Output power listed are maximum ERP for GSM850, WCDMA Band 5 and LTE (QPSK, 16QAM, 64QAM) Band 5; Output power listed are maximum EIRP for GSM1900, WCDMA Band 2,4 and LTE (QPSK, 16QAM, 64QAM) Band 2,4,7,38,41. This device supports Uplink Carrier Aggregation intra-band contiguous CA_7C, CA_38C. This device contains functions that are not operational in U.S. Territories; this filing is only applicable for U.S. operations. This device has integrated DSS, DTS, NII and PCE transmitters certified under the same FCC ID. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 1.09 W/kg, 1.00 W/kg, 1.40 W/kg and 1.59 W/kg, respectively.

Applications

Application IDDatePurpose
vYgS4JRachm9IHRnwbGCaA==2020-11-26Class II permissive change or modification of presently authorized equipment
VIzT60RYBm4In4TH3F96EQ==2020-11-26Class II permissive change or modification of presently authorized equipment
TIB7himIM9jrHkn3isuN0g==2020-11-26Class II permissive change or modification of presently authorized equipment
TD8q/9oT8DvK/FxtleThig==2020-11-26Class II permissive change or modification of presently authorized equipment
QdifMa5r/R+oCk7arQiR+A==2020-11-26Class II permissive change or modification of presently authorized equipment
wQf07o0VmU0oSWKAT1BrtQ==2020-11-23Original Equipment
h8SbLSn47/hLJAN8v0zxlQ==2020-11-23Original Equipment
dTEOZg54Q2y10jjH0tCXCA==2020-11-23Original Equipment
AkTUs5hfFC5jOSA39zqpdw==2020-11-23Original Equipment
/eJadjghsmwzmrIkA6Th8w==2020-11-23Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
15BCC
824.2-848.8 MHz0.1010.1ppm247KG7W22H
824.7-848.3 MHz0.0510.1ppm8M93G7D22H
824.7-848.3 MHz0.0530.1ppm8M95W7D22H
826.4-846.6 MHz0.0560.1ppm4M14F9W22H
1710.7-1754.3 MHz0.2570.1ppm17M9G7D27
1710.7-1754.3 MHz0.2280.1ppm17M9W7D27
1712.4-1752.6 MHz0.2520.1ppm4M19F9W27
1850.2-1909.8 MHz1.4550.1ppm248KGXW24E
1850.2-1909.8 MHz0.4040.1ppm246KG7W24E
1850.7-1909.3 MHz0.3350.1ppm17M9W7D24E
1850.7-1909.3 MHz0.3520.1ppm17M9G7D24E
1852.4-1907.6 MHz0.3450.1ppm4M15F9W24E
2402-2480 MHz0.009000015CCC
2402-2480 MHz0.00715CCC
2412-2462 MHz0.09515CCC
2502.5-2567.5 MHz0.2090.1ppm37M3G7D27
2502.5-2567.5 MHz0.2630.1ppm37M3W7D27
2537.5-2652.5 MHz0.2790.1ppm17M9G7D27
2537.5-2652.5 MHz0.2670.1ppm17M9W7D27
2572.5-2617.5 MHz0.2520.1ppm37M4G7D27
2572.5-2617.5 MHz0.280.1ppm37M3W7D27
5180-5240 MHz0.09215ECC
5260-5320 MHz0.09915ECC
5500-5700 MHz0.09215ECC
5745-5805 MHz0.03515ECC

Grants

TCB Grant - Application wQf07o0VmU0oSWKAT1BrtQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 11/23/2020

Application Dated: 11/23/2020
Xiaomi Communications Co., Ltd.
#019, 9th Floor, Building 6,
33 Xi'erqi Middle Road, Haidian District,
Beijing, 100085
China
 
Attention: hao sheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFZZJ19CG
Name of Grantee:  Xiaomi Communications Co., Ltd.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Mobile Phone (LTE/WCDMA/GSM/BT/WIFI)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application wQf07o0VmU0oSWKAT1BrtQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Xiaomi Communications Co., Ltd.
#019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District,
Beijing, 100085
China
  Date of Grant: 11/23/2020

Application Dated: 11/23/2020
 
Attention: hao sheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFZZJ19CG
Name of Grantee:  Xiaomi Communications Co., Ltd.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Mobile Phone (LTE/WCDMA/GSM/BT/WIFI)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application vYgS4JRachm9IHRnwbGCaA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 11/26/2020

Application Dated: 11/26/2020
Xiaomi Communications Co., Ltd.
#019, 9th Floor, Building 6,
33 Xi'erqi Middle Road, Haidian District,
Beijing, 100085
China
 
Attention: hao sheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFZZJ19CG
Name of Grantee:  Xiaomi Communications Co., Ltd.
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Mobile Phone (LTE/WCDMA/GSM/BT/WIFI)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 0.431 0.1  PM 248KGXW
22H 824.2  -  848.8 0.101 0.1  PM 247KG7W
22H 826.4  -  846.6 0.056 0.1  PM 4M14F9W
22H 824.7  -  848.3 0.051 0.1  PM 8M93G7D
22H 824.7  -  848.3 0.053 0.1  PM 8M95W7D
24E 1850.2  -  1909.8 1.455 0.1  PM 248KGXW
24E 1850.2  -  1909.8 0.404 0.1  PM 246KG7W
24E 1852.4  -  1907.6 0.345 0.1  PM 4M15F9W
24E 1850.7  -  1909.3 0.352 0.1  PM 17M9G7D
24E 1850.7  -  1909.3 0.335 0.1  PM 17M9W7D
27 1712.4  -  1752.6 0.252 0.1  PM 4M19F9W
27 1710.7  -  1754.3 0.257 0.1  PM 17M9G7D
27 1710.7  -  1754.3 0.228 0.1  PM 17M9W7D
27 2502.5  -  2567.5 0.209 0.1  PM 37M3G7D
27 2502.5  -  2567.5 0.263 0.1  PM 37M3W7D
27 2572.5  -  2617.5 0.252 0.1  PM 37M4G7D
27 2572.5  -  2617.5 0.28 0.1  PM 37M3W7D
27 2537.5  -  2652.5 0.279 0.1  PM 17M9G7D
27 2537.5  -  2652.5 0.267 0.1  PM 17M9W7D

Class II Permissive Change for Camera module modification and model name addition Output power listed are maximum ERP for GSM850, WCDMA Band 5 and LTE (QPSK, 16QAM, 64QAM) Band 5; Output power listed are maximum EIRP for GSM1900, WCDMA Band 2,4 and LTE (QPSK, 16QAM, 64QAM) Band 2,4,7,38,41. This device supports Uplink Carrier Aggregation intra-band contiguous CA_7C, CA_38C. This device contains functions that are not operational in U.S. Territories; this filing is only applicable for U.S. operations. This device has integrated DSS, DTS, NII and PCE transmitters certified under the same FCC ID. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 1.09 W/kg, 1.00 W/kg, 1.40 W/kg and 1.59 W/kg, respectively.

EAS Grant - Application vYgS4JRachm9IHRnwbGCaA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Xiaomi Communications Co., Ltd.
#019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District,
Beijing, 100085
China
  Date of Grant: 11/26/2020

Application Dated: 11/26/2020
 
Attention: hao sheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFZZJ19CG
Name of Grantee:  Xiaomi Communications Co., Ltd.
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Mobile Phone (LTE/WCDMA/GSM/BT/WIFI)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 0.431 0.1  PM 248KGXW
22H 824.2  -  848.8 0.101 0.1  PM 247KG7W
22H 826.4  -  846.6 0.056 0.1  PM 4M14F9W
22H 824.7  -  848.3 0.051 0.1  PM 8M93G7D
22H 824.7  -  848.3 0.053 0.1  PM 8M95W7D
24E 1850.2  -  1909.8 1.455 0.1  PM 248KGXW
24E 1850.2  -  1909.8 0.404 0.1  PM 246KG7W
24E 1852.4  -  1907.6 0.345 0.1  PM 4M15F9W
24E 1850.7  -  1909.3 0.352 0.1  PM 17M9G7D
24E 1850.7  -  1909.3 0.335 0.1  PM 17M9W7D
27 1712.4  -  1752.6 0.252 0.1  PM 4M19F9W
27 1710.7  -  1754.3 0.257 0.1  PM 17M9G7D
27 1710.7  -  1754.3 0.228 0.1  PM 17M9W7D
27 2502.5  -  2567.5 0.209 0.1  PM 37M3G7D
27 2502.5  -  2567.5 0.263 0.1  PM 37M3W7D
27 2572.5  -  2617.5 0.252 0.1  PM 37M4G7D
27 2572.5  -  2617.5 0.28 0.1  PM 37M3W7D
27 2537.5  -  2652.5 0.279 0.1  PM 17M9G7D
27 2537.5  -  2652.5 0.267 0.1  PM 17M9W7D

Class II Permissive Change for Camera module modification and model name addition Output power listed are maximum ERP for GSM850, WCDMA Band 5 and LTE (QPSK, 16QAM, 64QAM) Band 5; Output power listed are maximum EIRP for GSM1900, WCDMA Band 2,4 and LTE (QPSK, 16QAM, 64QAM) Band 2,4,7,38,41. This device supports Uplink Carrier Aggregation intra-band contiguous CA_7C, CA_38C. This device contains functions that are not operational in U.S. Territories; this filing is only applicable for U.S. operations. This device has integrated DSS, DTS, NII and PCE transmitters certified under the same FCC ID. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 1.09 W/kg, 1.00 W/kg, 1.40 W/kg and 1.59 W/kg, respectively.



TCB Grant - Application VIzT60RYBm4In4TH3F96EQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 11/26/2020

Application Dated: 11/26/2020
Xiaomi Communications Co., Ltd.
#019, 9th Floor, Building 6,
33 Xi'erqi Middle Road, Haidian District,
Beijing, 100085
China
 
Attention: hao sheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFZZJ19CG
Name of Grantee:  Xiaomi Communications Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Mobile Phone (LTE/WCDMA/GSM/BT/WIFI)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.009  

Class II Permissive Change for Camera module modification and model name addition Output power is maximum Peak conducted. This device has integrated DSS, DTS, NII and PCE transmitters certified under the same FCC ID. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 0.14 W/kg, <0.1 W/kg, 1.10 W/kg and 1.40 W/kg, respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application VIzT60RYBm4In4TH3F96EQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Xiaomi Communications Co., Ltd.
#019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District,
Beijing, 100085
China
  Date of Grant: 11/26/2020

Application Dated: 11/26/2020
 
Attention: hao sheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFZZJ19CG
Name of Grantee:  Xiaomi Communications Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Mobile Phone (LTE/WCDMA/GSM/BT/WIFI)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.009  

Class II Permissive Change for Camera module modification and model name addition Output power is maximum Peak conducted. This device has integrated DSS, DTS, NII and PCE transmitters certified under the same FCC ID. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 0.14 W/kg, <0.1 W/kg, 1.10 W/kg and 1.40 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application TIB7himIM9jrHkn3isuN0g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 11/26/2020

Application Dated: 11/26/2020
Xiaomi Communications Co., Ltd.
#019, 9th Floor, Building 6,
33 Xi'erqi Middle Road, Haidian District,
Beijing, 100085
China
 
Attention: hao sheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFZZJ19CG
Name of Grantee:  Xiaomi Communications Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Mobile Phone (LTE/WCDMA/GSM/BT/WIFI)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.092  
CC 15E 5260.0  -  5320.0 0.099  
CC 15E 5500.0  -  5700.0 0.092  
CC 15E 5745.0  -  5805.0 0.035  

Class II Permissive Change for Camera module modification and model name addition Output power is maximum average conducted. This device supports IEEE 802.11 a/n/ac 20, 40 and 80 MHz channel bandwidths. This device has integrated DSS, DTS, NII and PCE transmitters certified under the same FCC ID. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 0.40 W/kg, 0.22 W/kg, 1.40 W/kg and 1.59 W/kg, respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application TIB7himIM9jrHkn3isuN0g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Xiaomi Communications Co., Ltd.
#019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District,
Beijing, 100085
China
  Date of Grant: 11/26/2020

Application Dated: 11/26/2020
 
Attention: hao sheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFZZJ19CG
Name of Grantee:  Xiaomi Communications Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Mobile Phone (LTE/WCDMA/GSM/BT/WIFI)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.092  
CC 15E 5260.0  -  5320.0 0.099  
CC 15E 5500.0  -  5700.0 0.092  
CC 15E 5745.0  -  5805.0 0.035  

Class II Permissive Change for Camera module modification and model name addition Output power is maximum average conducted. This device supports IEEE 802.11 a/n/ac 20, 40 and 80 MHz channel bandwidths. This device has integrated DSS, DTS, NII and PCE transmitters certified under the same FCC ID. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 0.40 W/kg, 0.22 W/kg, 1.40 W/kg and 1.59 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application TD8q/9oT8DvK/FxtleThig==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 11/26/2020

Application Dated: 11/26/2020
Xiaomi Communications Co., Ltd.
#019, 9th Floor, Building 6,
33 Xi'erqi Middle Road, Haidian District,
Beijing, 100085
China
 
Attention: hao sheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFZZJ19CG
Name of Grantee:  Xiaomi Communications Co., Ltd.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Mobile Phone (LTE/WCDMA/GSM/BT/WIFI)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 

Class II Permissive Change for Camera module modification and model name addition

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application TD8q/9oT8DvK/FxtleThig==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Xiaomi Communications Co., Ltd.
#019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District,
Beijing, 100085
China
  Date of Grant: 11/26/2020

Application Dated: 11/26/2020
 
Attention: hao sheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFZZJ19CG
Name of Grantee:  Xiaomi Communications Co., Ltd.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Mobile Phone (LTE/WCDMA/GSM/BT/WIFI)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 

Class II Permissive Change for Camera module modification and model name addition


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application QdifMa5r/R+oCk7arQiR+A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 11/26/2020

Application Dated: 11/26/2020
Xiaomi Communications Co., Ltd.
#019, 9th Floor, Building 6,
33 Xi'erqi Middle Road, Haidian District,
Beijing, 100085
China
 
Attention: hao sheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFZZJ19CG
Name of Grantee:  Xiaomi Communications Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Mobile Phone (LTE/WCDMA/GSM/BT/WIFI)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.007  
CC 15C 2412.0  -  2462.0 0.095  

Class II Permissive Change for Camera module modification and model name addition Output power is maximum peak conducted. This device supports IEEE 802.11 b/g/n 20 and 40 MHz channel bandwidths. This device has integrated DSS, DTS, NII and PCE transmitters certified under the same FCC ID. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 0.43 W/kg, <0.1 W/kg, 1.30 W/kg and 1.42 W/kg, respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application QdifMa5r/R+oCk7arQiR+A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Xiaomi Communications Co., Ltd.
#019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District,
Beijing, 100085
China
  Date of Grant: 11/26/2020

Application Dated: 11/26/2020
 
Attention: hao sheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFZZJ19CG
Name of Grantee:  Xiaomi Communications Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Mobile Phone (LTE/WCDMA/GSM/BT/WIFI)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.007  
CC 15C 2412.0  -  2462.0 0.095  

Class II Permissive Change for Camera module modification and model name addition Output power is maximum peak conducted. This device supports IEEE 802.11 b/g/n 20 and 40 MHz channel bandwidths. This device has integrated DSS, DTS, NII and PCE transmitters certified under the same FCC ID. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 0.43 W/kg, <0.1 W/kg, 1.30 W/kg and 1.42 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application h8SbLSn47/hLJAN8v0zxlQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 11/23/2020

Application Dated: 11/23/2020
Xiaomi Communications Co., Ltd.
#019, 9th Floor, Building 6,
33 Xi'erqi Middle Road, Haidian District,
Beijing, 100085
China
 
Attention: hao sheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFZZJ19CG
Name of Grantee:  Xiaomi Communications Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Mobile Phone (LTE/WCDMA/GSM/BT/WIFI)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.092  
CC 15E 5260.0  -  5320.0 0.099  
CC 15E 5500.0  -  5700.0 0.092  
CC 15E 5745.0  -  5805.0 0.035  

Output power is maximum average conducted. This device supports IEEE 802.11 a/n/ac 20, 40 and 80 MHz channel bandwidths. This device has integrated DSS, DTS, NII and PCE transmitters certified under the same FCC ID. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 0.40 W/kg, 0.22 W/kg, 1.40 W/kg and 1.59 W/kg, respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application h8SbLSn47/hLJAN8v0zxlQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Xiaomi Communications Co., Ltd.
#019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District,
Beijing, 100085
China
  Date of Grant: 11/23/2020

Application Dated: 11/23/2020
 
Attention: hao sheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFZZJ19CG
Name of Grantee:  Xiaomi Communications Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Mobile Phone (LTE/WCDMA/GSM/BT/WIFI)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.092  
CC 15E 5260.0  -  5320.0 0.099  
CC 15E 5500.0  -  5700.0 0.092  
CC 15E 5745.0  -  5805.0 0.035  

Output power is maximum average conducted. This device supports IEEE 802.11 a/n/ac 20, 40 and 80 MHz channel bandwidths. This device has integrated DSS, DTS, NII and PCE transmitters certified under the same FCC ID. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 0.40 W/kg, 0.22 W/kg, 1.40 W/kg and 1.59 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application dTEOZg54Q2y10jjH0tCXCA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 11/23/2020

Application Dated: 11/23/2020
Xiaomi Communications Co., Ltd.
#019, 9th Floor, Building 6,
33 Xi'erqi Middle Road, Haidian District,
Beijing, 100085
China
 
Attention: hao sheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFZZJ19CG
Name of Grantee:  Xiaomi Communications Co., Ltd.
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Mobile Phone (LTE/WCDMA/GSM/BT/WIFI)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 0.431 0.1  PM 248KGXW
22H 824.2  -  848.8 0.101 0.1  PM 247KG7W
22H 826.4  -  846.6 0.056 0.1  PM 4M14F9W
22H 824.7  -  848.3 0.051 0.1  PM 8M93G7D
22H 824.7  -  848.3 0.053 0.1  PM 8M95W7D
24E 1850.2  -  1909.8 1.455 0.1  PM 248KGXW
24E 1850.2  -  1909.8 0.404 0.1  PM 246KG7W
24E 1852.4  -  1907.6 0.345 0.1  PM 4M15F9W
24E 1850.7  -  1909.3 0.352 0.1  PM 17M9G7D
24E 1850.7  -  1909.3 0.335 0.1  PM 17M9W7D
27 1712.4  -  1752.6 0.252 0.1  PM 4M19F9W
27 1710.7  -  1754.3 0.257 0.1  PM 17M9G7D
27 1710.7  -  1754.3 0.228 0.1  PM 17M9W7D
27 2502.5  -  2567.5 0.209 0.1  PM 37M3G7D
27 2502.5  -  2567.5 0.263 0.1  PM 37M3W7D
27 2572.5  -  2617.5 0.252 0.1  PM 37M4G7D
27 2572.5  -  2617.5 0.28 0.1  PM 37M3W7D
27 2537.5  -  2652.5 0.279 0.1  PM 17M9G7D
27 2537.5  -  2652.5 0.267 0.1  PM 17M9W7D

Output power listed are maximum ERP for GSM850, WCDMA Band 5 and LTE (QPSK, 16QAM, 64QAM) Band 5 ; Output power listed are maximum EIRP for GSM1900, WCDMA Band 2,4 and LTE (QPSK, 16QAM, 64QAM) Band 2,4,7,38,41. This device supports Uplink Carrier Aggregation intra-band contiguous CA_7C, CA_38C. This device contains functions that are not operational in U.S. Territories; this filing is only applicable for U.S. operations. This device has integrated DSS, DTS, NII and PCE transmitters certified under the same FCC ID. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 1.09 W/kg, 1.00 W/kg, 1.40 W/kg and 1.59 W/kg, respectively.

EAS Grant - Application dTEOZg54Q2y10jjH0tCXCA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Xiaomi Communications Co., Ltd.
#019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District,
Beijing, 100085
China
  Date of Grant: 11/23/2020

Application Dated: 11/23/2020
 
Attention: hao sheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFZZJ19CG
Name of Grantee:  Xiaomi Communications Co., Ltd.
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Mobile Phone (LTE/WCDMA/GSM/BT/WIFI)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 0.431 0.1  PM 248KGXW
22H 824.2  -  848.8 0.101 0.1  PM 247KG7W
22H 826.4  -  846.6 0.056 0.1  PM 4M14F9W
22H 824.7  -  848.3 0.051 0.1  PM 8M93G7D
22H 824.7  -  848.3 0.053 0.1  PM 8M95W7D
24E 1850.2  -  1909.8 1.455 0.1  PM 248KGXW
24E 1850.2  -  1909.8 0.404 0.1  PM 246KG7W
24E 1852.4  -  1907.6 0.345 0.1  PM 4M15F9W
24E 1850.7  -  1909.3 0.352 0.1  PM 17M9G7D
24E 1850.7  -  1909.3 0.335 0.1  PM 17M9W7D
27 1712.4  -  1752.6 0.252 0.1  PM 4M19F9W
27 1710.7  -  1754.3 0.257 0.1  PM 17M9G7D
27 1710.7  -  1754.3 0.228 0.1  PM 17M9W7D
27 2502.5  -  2567.5 0.209 0.1  PM 37M3G7D
27 2502.5  -  2567.5 0.263 0.1  PM 37M3W7D
27 2572.5  -  2617.5 0.252 0.1  PM 37M4G7D
27 2572.5  -  2617.5 0.28 0.1  PM 37M3W7D
27 2537.5  -  2652.5 0.279 0.1  PM 17M9G7D
27 2537.5  -  2652.5 0.267 0.1  PM 17M9W7D

Output power listed are maximum ERP for GSM850, WCDMA Band 5 and LTE (QPSK, 16QAM, 64QAM) Band 5 ; Output power listed are maximum EIRP for GSM1900, WCDMA Band 2,4 and LTE (QPSK, 16QAM, 64QAM) Band 2,4,7,38,41. This device supports Uplink Carrier Aggregation intra-band contiguous CA_7C, CA_38C. This device contains functions that are not operational in U.S. Territories; this filing is only applicable for U.S. operations. This device has integrated DSS, DTS, NII and PCE transmitters certified under the same FCC ID. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 1.09 W/kg, 1.00 W/kg, 1.40 W/kg and 1.59 W/kg, respectively.



TCB Grant - Application AkTUs5hfFC5jOSA39zqpdw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 11/23/2020

Application Dated: 11/23/2020
Xiaomi Communications Co., Ltd.
#019, 9th Floor, Building 6,
33 Xi'erqi Middle Road, Haidian District,
Beijing, 100085
China
 
Attention: hao sheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFZZJ19CG
Name of Grantee:  Xiaomi Communications Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Mobile Phone (LTE/WCDMA/GSM/BT/WIFI)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.007  
CC 15C 2412.0  -  2462.0 0.095  

Output power is maximum peak conducted. This device supports IEEE 802.11 b/g/n 20 and 40 MHz channel bandwidths. This device has integrated DSS, DTS, NII and PCE transmitters certified under the same FCC ID. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 0.43 W/kg, <0.1 W/kg, 1.30 W/kg and 1.42 W/kg, respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application AkTUs5hfFC5jOSA39zqpdw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Xiaomi Communications Co., Ltd.
#019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District,
Beijing, 100085
China
  Date of Grant: 11/23/2020

Application Dated: 11/23/2020
 
Attention: hao sheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFZZJ19CG
Name of Grantee:  Xiaomi Communications Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Mobile Phone (LTE/WCDMA/GSM/BT/WIFI)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.007  
CC 15C 2412.0  -  2462.0 0.095  

Output power is maximum peak conducted. This device supports IEEE 802.11 b/g/n 20 and 40 MHz channel bandwidths. This device has integrated DSS, DTS, NII and PCE transmitters certified under the same FCC ID. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 0.43 W/kg, <0.1 W/kg, 1.30 W/kg and 1.42 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application /eJadjghsmwzmrIkA6Th8w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 11/23/2020

Application Dated: 11/23/2020
Xiaomi Communications Co., Ltd.
#019, 9th Floor, Building 6,
33 Xi'erqi Middle Road, Haidian District,
Beijing, 100085
China
 
Attention: hao sheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFZZJ19CG
Name of Grantee:  Xiaomi Communications Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Mobile Phone (LTE/WCDMA/GSM/BT/WIFI)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.009  

Output power is maximum Peak conducted. This device has integrated DSS, DTS, NII and PCE transmitters certified under the same FCC ID. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 0.14 W/kg, <0.1 W/kg, 1.10 W/kg and 1.40 W/kg, respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application /eJadjghsmwzmrIkA6Th8w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Xiaomi Communications Co., Ltd.
#019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District,
Beijing, 100085
China
  Date of Grant: 11/23/2020

Application Dated: 11/23/2020
 
Attention: hao sheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFZZJ19CG
Name of Grantee:  Xiaomi Communications Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Mobile Phone (LTE/WCDMA/GSM/BT/WIFI)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.009  

Output power is maximum Peak conducted. This device has integrated DSS, DTS, NII and PCE transmitters certified under the same FCC ID. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 0.14 W/kg, <0.1 W/kg, 1.10 W/kg and 1.40 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: