BT565S-1 Bluetooth Headset Test Report SZEM170200117301 RPT Dongguan Koppo Electronics Co.,Ltd

Dongguan Koppo Electronics Co.,Ltd Bluetooth Headset

Page 1 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 2 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 3 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 4 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 5 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 6 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 7 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 8 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 9 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 10 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 11 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 12 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 13 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 14 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 15 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 16 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 17 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 18 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 19 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 20 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 21 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 22 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 23 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 24 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 25 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 26 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 27 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 28 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 29 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 30 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 31 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 32 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 33 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 34 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 35 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 36 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 37 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 38 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 39 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 40 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 41 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 42 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 43 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 44 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 45 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 46 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 47 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 48 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 49 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 50 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 51 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 52 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 53 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 54 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 55 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 56 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 57 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 58 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 59 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 60 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 61 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 62 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 63 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 64 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 65 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 66 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 67 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 68 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 69 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 70 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 71 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 72 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 73 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 74 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 75 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 76 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 77 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 78 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 79 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 80 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 81 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 82 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 83 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 84 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 85 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 86 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 87 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 88 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 89 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 90 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 91 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 92 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 93 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 94 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 95 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 96 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 97 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 98 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 99 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 100 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Page 101 of BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd

SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
No. 1 Workshop, M-10, Middle section, Science & Technology Park,
Shenzhen, Guangdong, China 518057
Telephone:
Fax:
Email:
Report No.: SZEM170200117301
Page:
1 of 101
+86 (0) 755 2601 2053
+86 (0) 755 2671 0594
ee.shenzhen@sgs.com
TEST REPORT
Application No.:
Applicant:
Address of Applicant:
Manufacturer:
Address of Manufacturer:
Factory:
Address of Factory:
SZEM1702001173CR
Dongguan Koppo Electronics Co., Ltd.
No.2 3 Road, Buxinji Industrial Area, Guanjingtou Village, Fenggang Town,
Dongguan City, Guangdong Province, China
Dongguan Koppo Electronics Co., Ltd.
No.2 3 Road, Buxinji Industrial Area, Guanjingtou Village, Fenggang Town,
Dongguan City, Guangdong Province, China
Dongguan Koppo Electronics Co., Ltd.
No.2 3 Road, Buxinji Industrial Area, Guanjingtou Village, Fenggang Town,
Dongguan City, Guangdong Province, China
Equipment Under Test (EUT):
EUT Name:
Bluetooth Headset
Model No.:
BT565S-1
FCC ID:
2AG68BT565S-1
47 CFR Part 15, Subpart C 15.247
Standards:
Date of Receipt:
2017-02-27
Date of Test:
2017-03-09 to 2017-05-02
Date of Issue:
2017-08-30
Test Result :
Pass*
* In the configuration tested, the EUT complied with the standards specified above.
Jack Zhang
EMC Laboratory Manager
The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report.
If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system
complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical
Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical
Approvals in writing.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
2 of 101
Revision Record
Version
Chapter
01
Date
2017-08-30
Modifier
Remark
Original
Authorized for issue by:
Bill Chen /Project Engineer
Eric Fu /Reviewer
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
3 of 101
Test Summary
Radio Spectrum Technical Requirement
Item
Standard
Method
Antenna
Requirement
47 CFR Part 15,
Subpart C 15.247
N/A
Other requirements
Frequency Hopping
Spread Spectrum
System Hopping
Sequence
47 CFR Part 15,
Subpart C 15.247
N/A
Radio Spectrum Matter Part
Item
Standard
Conducted
Emissions at AC
47 CFR Part 15,
Power Line (150kHzSubpart C 15.247
30MHz)
Requirement
47 CFR Part 15,
Subpart C 15.203 &
15.247(c)
47 CFR Part 15,
Subpart C
15.247(a)(1),(g),(h)
Result
Pass
Pass
Method
Requirement
Result
ANSI C63.10 (2013)
Section 6.2
47 CFR Part 15,
Subpart C 15.207
Pass
Conducted Peak
Output Power
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 7.8.5
20dB Bandwidth
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 7.8.7
Carrier Frequencies
Separation
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 7.8.2
Hopping Channel
Number
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 7.8.3
Dwell Time
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 7.8.4
Conducted Band
Edges Measurement
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 7.8.6
Conducted Spurious
Emissions
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 7.8.8
Radiated Emissions
which fall in the
restricted bands
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 6.10.5
Radiated Spurious
Emissions
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 6.4,6.5,6.6
47 CFR Part 15,
Subpart C
15.247(b)(1)
47 CFR Part 15,
Subpart C
15.247(a)(1)
47 CFR Part 15,
Subpart C
15.247a(1)
47 CFR Part 15,
Subpart C
15.247a(1)(iii)
47 CFR Part 15,
Subpart C
15.247a(1)(iii)
47 CFR Part 15,
Subpart C
15.247(d)
47 CFR Part 15,
Subpart C
15.247(d)
47 CFR Part 15,
Subpart C 15.205
& 15.209
47 CFR Part 15,
Subpart C 15.205
& 15.209
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
4 of 101
Contents
Page
COVER PAGE ..................................................................................................................................... 1
TEST SUMMARY ................................................................................................................................ 3
CONTENTS ......................................................................................................................................... 4
GENERAL INFORMATION .................................................................................................................. 6
4.1
4.2
4.3
4.4
4.5
4.6
4.7
DETAILS OF E.U.T. ......................................................................................................................... 6
DESCRIPTION OF SUPPORT UNITS .................................................................................................... 7
MEASUREMENT UNCERTAINTY ......................................................................................................... 7
TEST LOCATION ............................................................................................................................. 8
TEST FACILITY ............................................................................................................................... 8
DEVIATION FROM STANDARDS.......................................................................................................... 8
ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 8
EQUIPMENT LIST ............................................................................................................................... 9
RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................13
6.1
ANTENNA REQUIREMENT ................................................................................................................13
6.1.1 Test Requirement: ..................................................................................................................13
6.1.2 Conclusion ..............................................................................................................................13
6.2
OTHER REQUIREMENTS FREQUENCY HOPPING SPREAD SPECTRUM SYSTEM HOPPING SEQUENCE .........14
6.2.1 Test Requirement: ..................................................................................................................14
6.2.2 Conclusion ..............................................................................................................................14
RADIO SPECTRUM MATTER TEST RESULTS ................................................................................15
7.1
CONDUCTED EMISSIONS AT AC POWER LINE (150KHZ-30MHZ) ........................................................15
7.1.1 E.U.T. Operation .....................................................................................................................16
7.1.2 Test Setup Diagram ................................................................................................................16
7.1.3 Measurement Procedure and Data .........................................................................................16
7.2
CONDUCTED PEAK OUTPUT POWER................................................................................................19
7.2.1 E.U.T. Operation .....................................................................................................................20
7.2.2 Test Setup Diagram ................................................................................................................20
7.2.3 Measurement Procedure and Data .........................................................................................20
7.3
20DB BANDWIDTH .........................................................................................................................21
7.3.1 E.U.T. Operation .....................................................................................................................21
7.3.2 Test Setup Diagram ................................................................................................................21
7.3.3 Measurement Procedure and Data .........................................................................................21
7.4
CARRIER FREQUENCIES SEPARATION ..............................................................................................22
7.4.1 E.U.T. Operation .....................................................................................................................22
7.4.2 Test Setup Diagram ................................................................................................................22
7.4.3 Measurement Procedure and Data .........................................................................................22
7.5
HOPPING CHANNEL NUMBER ..........................................................................................................23
7.5.1 E.U.T. Operation .....................................................................................................................24
7.5.2 Test Setup Diagram ................................................................................................................24
7.5.3 Measurement Procedure and Data .........................................................................................24
7.6
DWELL TIME .................................................................................................................................25
7.6.1 E.U.T. Operation .....................................................................................................................26
7.6.2 Test Setup Diagram ................................................................................................................26
7.6.3 Measurement Procedure and Data .........................................................................................26
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
5 of 101
7.7
CONDUCTED BAND EDGES MEASUREMENT ......................................................................................27
7.7.1 E.U.T. Operation .....................................................................................................................27
7.7.2 Test Setup Diagram ................................................................................................................27
7.7.3 Measurement Procedure and Data .........................................................................................27
7.8
CONDUCTED SPURIOUS EMISSIONS .................................................................................................28
7.8.1 E.U.T. Operation .....................................................................................................................28
7.8.2 Test Setup Diagram ................................................................................................................28
7.8.3 Measurement Procedure and Data .........................................................................................28
7.9
RADIATED EMISSIONS WHICH FALL IN THE RESTRICTED BANDS ............................................................29
7.9.1 E.U.T. Operation .....................................................................................................................29
7.9.2 Test Setup Diagram ................................................................................................................30
7.9.3 Measurement Procedure and Data .........................................................................................30
7.10
RADIATED SPURIOUS EMISSIONS.....................................................................................................35
7.10.1
E.U.T. Operation.................................................................................................................36
7.10.2
Test Setup Diagram ............................................................................................................36
7.10.3
Measurement Procedure and Data.....................................................................................37
PHOTOGRAPHS ................................................................................................................................43
8.1
8.2
8.3
CONDUCTED EMISSIONS AT AC POWER LINE (150KHZ-30MHZ) TEST SETUP......................................43
RADIATED SPURIOUS EMISSIONS TEST SETUP ..................................................................................44
EUT CONSTRUCTIONAL DETAILS ....................................................................................................45
APPENDIX ..........................................................................................................................................52
9.1
APPENDIX 15.247 .................................................................................................................. 52-101
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
6 of 101
General Information
4.1 Details of E.U.T.
Power supply:
Rechargeable battery: DC 3.7V (Charge by USB)
Test voltage:
AC 120V 50Hz
Frequency Range:
BT Version
Modulation Technique:
2402MHz to 2480MHz
V4.1 with EDR
Frequency Hopping Spread Spectrum(FHSS)
Modulation Type:
GFSK
Number of Channels:
79
Hopping Channel Type:
Adaptive Frequency Hopping systems
Antenna Type
Chip Antenna
Antenna Gain
2dBi
Operation Frequency each of channel
Channel
10
11
12
13
14
15
16
17
18
19
Frequency
2402MHz
2403MHz
2404MHz
2405MHz
2406MHz
2407MHz
2408MHz
2409MHz
2410MHz
2411MHz
2412MHz
2413MHz
2414MHz
2415MHz
2416MHz
2417MHz
2418MHz
2419MHz
2420MHz
2421MHz
Channel
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Frequency
2422MHz
2423MHz
2424MHz
2425MHz
2426MHz
2427MHz
2428MHz
2429MHz
2430MHz
2431MHz
2432MHz
2433MHz
2434MHz
2435MHz
2436MHz
2437MHz
2438MHz
2439MHz
2440MHz
2441MHz
Channel
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
Frequency
2442MHz
2443MHz
2444MHz
2445MHz
2446MHz
2447MHz
2448MHz
2449MHz
2450MHz
2451MHz
2452MHz
2453MHz
2454MHz
2455MHz
2456MHz
2457MHz
2458MHz
2459MHz
2460MHz
2461MHz
Channel
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
Frequency
2462MHz
2463MHz
2464MHz
2465MHz
2466MHz
2467MHz
2468MHz
2469MHz
2470MHz
2471MHz
2472MHz
2473MHz
2474MHz
2475MHz
2476MHz
2477MHz
2478MHz
2479MHz
2480MHz
Note:
In section 15.31(m), regards to the operating frequency range over 10 MHz, the Lowest frequency, the
middle
frequency, and the highest frequency of channel were selected to perform the test, and the selected channel
see below:
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
7 of 101
Channel
Frequency
The Lowest channel
2402MHz
The Middle channel
2441MHz
The Highest channel
2480MHz
4.2 Description of Support Units
The EUT has been tested with associated equipment below.
Description
Manufacturer
Model No.
Laptop
Lenovo
T430u
Test board
Supply to SGS
FT232
4.3 Measurement Uncertainty
No.
Item
Measurement Uncertainty
Radio Frequency
7.25 x 10-8
Duty cycle
0.37%
Occupied Bandwidth
3%
RF conducted power
0.75dB
RF power density
2.84dB
Conducted Spurious emissions
0.75dB
RF Radiated power
Radiated Spurious emission test
Temperature test
1°C
10
Humidity test
3%
11
Supply voltages
1.5%
12
Time
3%
4.5dB (below 1GHz)
4.8dB (above 1GHz)
4.5dB (30MHz-1GHz)
4.8dB (1GHz-18GHz)
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
8 of 101
4.4 Test Location
All tests were performed at:
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch
No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China.
518057.
Tel: +86 755 2601 2053
Fax: +86 755 2671 0594
No tests were sub-contracted.
4.5 Test Facility
The test facility is recognized, certified, or accredited by the following organizations:
• CNAS (No. CNAS L2929)
CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC
Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration
Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration
Laboratories) for the competence in the field of testing.
• A2LA (Certificate No. 3816.01)
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the
American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01.
• VCCI
The 10m Semi-anechoic chamber and Shielded Room of SGS-CSTC Standards Technical Services
Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with
Registration No.: G-823, R-4188, T-1153 and C-2383 respectively.
• FCC –Designation Number: CN1178
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized
as an accredited testing laboratory.
Designation Number: CN1178. Test Firm Registration Number: 406779.
• Industry Canada (IC)
Two 3m Semi-anechoic chambers and the 10m Semi-anechoic chamber of SGS-CSTC Standards
Technical Services Co., Ltd. Shenzhen Branch EMC Lab have been registered by Certification and
Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 4620C-1,
4620C-2, 4620C-3.
4.6 Deviation from Standards
None
4.7 Abnormalities from Standard Conditions
None
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
9 of 101
Equipment List
Conducted Emissions at AC Power Line (150kHz-30MHz)
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
Shielding Room
ZhongYu Electron
GB-88
SEM001-06
2017-05-10
2018-05-10
Measurement Software
AUDIX
e3
V5.4.1221d
N/A
N/A
N/A
LISN
Rohde & Schwarz
ENV216
SEM007-01
2016-10-09
2017-10-09
LISN
ETS-LINDGREN
3816/2
SEM007-02
2017-04-14
2018-04-13
8 Line ISN
Fischer Custom
Communications
Inc.
FCC-TLISNT8-02
EMC0120
2016-09-28
2017-09-28
4 Line ISN
Fischer Custom
Communications
Inc.
FCC-TLISNT4-02
EMC0121
2016-09-28
2017-09-28
2 Line ISN
Fischer Custom
FCC-TLISNT2-02
EMC0122
2016-09-28
2017-09-28
Conducted Peak Output Power
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
DC Power Supply
ZhaoXin
RXN-305D
SEM011-02
2016-10-09
2017-10-09
Spectrum Analyzer
Rohde & Schwarz
FSP
SEM004-06
2016-10-09
2017-10-09
Measurement Software
JS Tonscend
JS1120-2
BT/WIFI V2.
N/A
N/A
N/A
Signal Generator
Rohde & Schwarz
SML03
SEM006-02
2017-04-14
2018-04-13
Power Meter
Rohde & Schwarz
NRVS
SEM014-02
2016-10-09
2017-10-09
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
DC Power Supply
ZhaoXin
RXN-305D
SEM011-02
2016-10-09
2017-10-09
Spectrum Analyzer
Rohde & Schwarz
FSP
SEM004-06
2016-10-09
2017-10-09
Measurement Software
JS Tonscend
JS1120-2
BT/WIFI V2.
N/A
N/A
N/A
Signal Generator
Rohde & Schwarz
SML03
SEM006-02
2017-04-14
2018-04-13
Power Meter
Rohde & Schwarz
NRVS
SEM014-02
2016-10-09
2017-10-09
20dB Bandwidth
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
10 of 101
Carrier Frequencies Separation
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
DC Power Supply
ZhaoXin
RXN-305D
SEM011-02
2016-10-09
2017-10-09
Spectrum Analyzer
Rohde & Schwarz
FSP
SEM004-06
2016-10-09
2017-10-09
Measurement Software
JS Tonscend
JS1120-2
BT/WIFI V2.
N/A
N/A
N/A
Signal Generator
Rohde & Schwarz
SML03
SEM006-02
2017-04-14
2018-04-13
Power Meter
Rohde & Schwarz
NRVS
SEM014-02
2016-10-09
2017-10-09
Hopping Channel Number
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
DC Power Supply
ZhaoXin
RXN-305D
SEM011-02
2016-10-09
2017-10-09
Spectrum Analyzer
Rohde & Schwarz
FSP
SEM004-06
2016-10-09
2017-10-09
Measurement Software
JS Tonscend
JS1120-2
BT/WIFI V2.
N/A
N/A
N/A
Signal Generator
Rohde & Schwarz
SML03
SEM006-02
2017-04-14
2018-04-13
Power Meter
Rohde & Schwarz
NRVS
SEM014-02
2016-10-09
2017-10-09
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
DC Power Supply
ZhaoXin
RXN-305D
SEM011-02
2016-10-09
2017-10-09
Spectrum Analyzer
Rohde & Schwarz
FSP
SEM004-06
2016-10-09
2017-10-09
Measurement Software
JS Tonscend
JS1120-2
BT/WIFI V2.
N/A
N/A
N/A
Signal Generator
Rohde & Schwarz
SML03
SEM006-02
2017-04-14
2018-04-13
Power Meter
Rohde & Schwarz
NRVS
SEM014-02
2016-10-09
2017-10-09
Dwell Time
Conducted Band Edges Measurement
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
DC Power Supply
ZhaoXin
RXN-305D
SEM011-02
2016-10-09
2017-10-09
Spectrum Analyzer
Rohde & Schwarz
FSP
SEM004-06
2016-10-09
2017-10-09
Measurement Software
JS Tonscend
JS1120-2
BT/WIFI V2.
N/A
N/A
N/A
Signal Generator
Rohde & Schwarz
SML03
SEM006-02
2017-04-14
2018-04-13
Power Meter
Rohde & Schwarz
NRVS
SEM014-02
2016-10-09
2017-10-09
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
11 of 101
Conducted Spurious Emissions
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
DC Power Supply
ZhaoXin
RXN-305D
SEM011-02
2016-10-09
2017-10-09
Spectrum Analyzer
Rohde & Schwarz
FSP
SEM004-06
2016-10-09
2017-10-09
Measurement Software
JS Tonscend
JS1120-2
BT/WIFI V2.
N/A
N/A
N/A
Signal Generator
Rohde & Schwarz
SML03
SEM006-02
2017-04-14
2018-04-13
Power Meter
Rohde & Schwarz
NRVS
SEM014-02
2016-10-09
2017-10-09
Radiated Emissions which fall in the restricted bands
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
3m Semi-Anechoic
Chamber
AUDIX
N/A
SEM001-02
2017-05-02
2020-05-01
Measurement Software
AUDIX
e3 V8.20146-27
N/A
N/A
N/A
Spectrum Analyzer
Rohde & Schwarz
FSU43
SEM004-08
2017-04-14
2018-04-13
ETS-Lindgren
3142C
SEM003-02
2017-03-05
2020-03-05
Rohde & Schwarz
HF907
SEM003-07
2015-06-14
2018-06-14
Schwarzbeck
BBHA 9170
SEM003-14
2017-06-16
2020-06-15
HP
8447D
SEM005-02
2016-10-09
2017-10-09
Black Diamond
Series
BDLNA0118-352810
SEM005-05
2016-10-09
2017-10-09
Compliance
Directions Systems
Inc.
PAP-0126
SEM004-10
2016-10-17
2017-10-17
SEM005-08
2017-04-14
2018-04-13
BiConiLog Antenna
(26-3000MHz)
Horn Antenna (118GHz)
Horn Antenna
(15GHz-40GHz)
Pre-amplifier
(0.1-1300MHz)
Low Noise Amplifier
(100MHz-18GHz)
Pre-amplifier
(0.1-26.5GHz)
Pre-amplifier
(26GHz-40GHz)
Compliance
Directions Systems PAP-2640-50
Inc.
DC Power Supply
Zhao Xin
RXN-305D
SEM011-02
2016-10-09
2017-10-09
Active Loop Antenna
ETS-Lindgren
6502
SEM003-08
2015-08-14
2018-08-14
Band filter
N/A
N/A
SEM023-01
N/A
N/A
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
12 of 101
Radiated Spurious Emissions
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
3m Semi-Anechoic
Chamber
AUDIX
N/A
SEM001-02
2017-05-02
2020-05-01
Measurement Software
AUDIX
e3 V8.20146-27
N/A
N/A
N/A
Spectrum Analyzer
Rohde & Schwarz
FSU43
SEM004-08
2017-04-14
2018-04-13
ETS-Lindgren
3142C
SEM003-02
2017-03-05
2020-03-05
Rohde & Schwarz
HF907
SEM003-07
2015-06-14
2018-06-14
Schwarzbeck
BBHA 9170
SEM003-14
2017-06-16
2020-06-15
HP
8447D
SEM005-02
2016-10-09
2017-10-09
Black Diamond
Series
BDLNA0118-352810
SEM005-05
2016-10-09
2017-10-09
Compliance
Directions Systems
Inc.
PAP-0126
SEM004-10
2016-10-17
2017-10-17
SEM005-08
2017-04-14
2018-04-13
BiConiLog Antenna
(26-3000MHz)
Horn Antenna (118GHz)
Horn Antenna
(15GHz-40GHz)
Pre-amplifier
(0.1-1300MHz)
Low Noise Amplifier
(100MHz-18GHz)
Pre-amplifier
(0.1-26.5GHz)
Pre-amplifier
(26GHz-40GHz)
Compliance
Directions Systems PAP-2640-50
Inc.
DC Power Supply
Zhao Xin
RXN-305D
SEM011-02
2016-10-09
2017-10-09
Active Loop Antenna
ETS-Lindgren
6502
SEM003-08
2015-08-14
2018-08-14
Band filter
N/A
N/A
SEM023-01
N/A
N/A
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
ZJ1-2B
SEM002-03
2016-10-12
2017-10-12
ZJ1-2B
SEM002-04
2016-10-12
2017-10-12
General used equipment
Equipment
Humidity/ Temperature
Indicator
Humidity/ Temperature
Indicator
Shanghai
Meteorological
Industry Factory
Shanghai
Meteorological
Industry Factory
Humidity/ Temperature
Indicator
Mingle
N/A
SEM002-08
2016-10-12
2017-10-12
Barometer
Changchun
Meteorological
Industry Factory
DYM3
SEM002-01
2017-04-18
2018-04-18
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
13 of 101
Radio Spectrum Technical Requirement
6.1 Antenna Requirement
6.1.1 Test Requirement:
47 CFR Part 15, Subpart C 15.203 & 15.247(c)
6.1.2 Conclusion
Standard Requirment:
An intentional radiator shall be designed to ensure that no antenna other than that furnished by the
responsible party shall be used with the device. The use of a permanently attached antenna or of an
antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit
so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or
electrical connector is prohibited.
15.247(b) (4) requirement:
The conducted output power limit specified in paragraph (b) of this section is based on the use of
antennas with directional gains that do not exceed 6 dBi. Except as shown in paragraph (c) of this
section, if transmitting antennas of directional gain greater than 6 dBi are used, the conducted output
power from the intentional radiator shall be reduced below the stated values in paragraphs (b)(1),
(b)(2), and (b)(3) of this section, as appropriate, by the amount in dB that the directional gain of the
antenna exceeds 6 dBi.
EUT Antenna:
The antenna is integrated on the main PCB and no consideration of replacement. The best case gain
of the antenna is 2dBi.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
14 of 101
6.2 Other requirements Frequency Hopping Spread Spectrum System Hopping
Sequence
6.2.1 Test Requirement:
47 CFR Part 15, Subpart C 15.247(a)(1),(g),(h)
6.2.2 Conclusion
Standard Requirment:
The system shall hop to channel frequencies that are selected at the system hopping rate from a
Pseudorandom ordered list of hopping frequencies. Each frequency must be used equally on the
average by each transmitter. The system receivers shall have input bandwidths that match the hopping
channel bandwidths of their corresponding transmitters and shall shift frequencies in synchronization
with the transmitted signals.
Frequency hopping spread spectrum systems are not required to employ all available hopping
channels during each transmission. However, the system, consisting of both the transmitter and the
receiver, must be designed to comply with all of the regulations in this section should the transmitter be
presented with a continuous data (or information) stream. In addition, a system employing short
transmission bursts must comply with the definition of a frequency hopping system and must distribute
its transmissions over the minimum number of hopping channels specified in this section.
The incorporation of intelligence within a frequency hopping spread spectrum system that permits the
system to recognize other users within the spectrum band so that it individually and independently
chooses and adapts its hopsets to avoid hopping on occupied channels is permitted. The coordination
of frequency hopping systems in any other manner for the express purpose of avoiding the
simultaneous occupancy of individual hopping frequencies by multiple transmitters is not permitted.
Compliance for section 15.247(a)(1):
According to Technical Specification, the pseudorandom sequence may be generated in a nine-stage
shift register whose 5th and 9th stage outputs are added in a modulo-two addition stage. And the result
is fed back to the input of the first stage. The sequence begins with the first ONE of 9 consecutive
ONEs; i.e. the shift register is initialized with nine ones.
Number of shift register stages: 9
Length of pseudo-random sequence: 29 -1 = 511 bits
Longest sequence of zeros: 8 (non-inverted signal)
Linear Feedback Shift Register for Generation of the PRBS sequence
An example of Pseudorandom Frequency Hopping Sequence as follow:
Each frequency used equally on the average by each transmitter.
According to Technical Specification, the receivers are designed to have input and IF bandwidths that
match the hopping channel bandwidths of any transmitters and shift frequencies in synchronization with
the transmitted signals.
Compliance for section 15.247(g):
According to Technical Specification, the system transmits the packet with the pseudorandom hopping
frequency with a continuous data and the short burst transmission from the Bluetooth system is also
transmitted under the frequency hopping system with the pseudorandom hopping frequency system.
Compliance for section 15.247(h):
According to Technical specification, the system incorporates with an adaptive system to detect other
user within the spectrum band so that it individ
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
15 of 101
Radio Spectrum Matter Test Results
7.1 Conducted Emissions at AC Power Line (150kHz-30MHz)
Test Requirement
Test Method:
Limit:
Frequency of emission(MHz)
47 CFR Part 15, Subpart C 15.207
ANSI C63.10 (2013) Section 6.2
Conducted limit(dBµV)
Quasi-peak
0.15-0.5
66 to 56*
0.5-5
56
5-30
60
*Decreases with the logarithm of the frequency.
Average
56 to 46*
46
50
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
16 of 101
7.1.1 E.U.T. Operation
Operating Environment:
Temperature:
25 °C
Atmospheric Pressure:
1015 mbar
Humidity: 55 % RH
Test mode:
c:Charge + TX_non-Hop mode_Keep the EUT in charging and continuously
transmitting mode with GFSK modulation, π/4DQPSK modulation, 8DPSK
modulation. All modes have been tested and only the data of worst case is recorded
in the report.
7.1.2 Test Setup Diagram
7.1.3 Measurement Procedure and Data
1) The mains terminal disturbance voltage test was conducted in a shielded room.
2) The EUT was connected to AC power source through a LISN 1 (Line Impedance Stabilization
Network) which provides a 50ohm/50µH + 5ohm linear impedance. The power cables of all other units
of the EUT were connected to a second LISN 2, which was bonded to the ground reference plane in the
same way as the LISN 1 for the unit being measured. A multiple socket outlet strip was used to connect
multiple power cables to a single LISN provided the rating of the LISN was not exceeded.
3) The tabletop EUT was placed upon a non-metallic table 0.8m above the ground reference plane.
And for floor-standing arrangement, the EUT was placed on the horizontal ground reference plane,
4) The test was performed with a vertical ground reference plane. The rear of the EUT shall be 0.4 m
from the vertical ground reference plane. The vertical ground reference plane was bonded to the
horizontal ground reference plane. The LISN 1 was placed 0.8 m from the boundary of the unit under
test and bonded to a ground reference plane for LISNs mounted on top of the ground reference plane.
This distance was between the closest points of the LISN 1 and the EUT. All other units of the EUT and
associated equipment was at least 0.8 m from the LISN 2.
5) In order to find the maximum emission, the relative positions of equipment and all of the interface
cables must be changed according to ANSI C63.10 on conducted measurement.
Remark: LISN=Read Level+ Cable Loss+ LISN Factor
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
17 of 101
Mode:c; Line:Live Line
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
18 of 101
Mode:c; Line:Neutral Line
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
19 of 101
7.2 Conducted Peak Output Power
Test Requirement
Test Method:
Limit:
47 CFR Part 15, Subpart C 15.247(b)(1)
ANSI C63.10 (2013) Section 7.8.5
20.97dBm
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
20 of 101
7.2.1 E.U.T. Operation
Operating Environment:
Temperature:
23 °C
Atmospheric Pressure:
1020 mbar
Humidity: 56 % RH
Test mode
b:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK
modulation, π/4DQPSK modulation, 8DPSK modulation. All modes have been
tested and only the data of worst case is recorded in the report.
7.2.2 Test Setup Diagram
7.2.3 Measurement Procedure and Data
The detailed test data see: Appendix 15.247
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
21 of 101
7.3 20dB Bandwidth
Test Requirement
47 CFR Part 15, Subpart C 15.247(a)(1)
Test Method:
ANSI C63.10 (2013) Section 7.8.7
7.3.1 E.U.T. Operation
Operating Environment:
Temperature:
23 °C
Atmospheric Pressure:
1020 mbar
Humidity: 56 % RH
Test mode
b:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK
modulation, π/4DQPSK modulation, 8DPSK modulation. All modes have been
tested and only the data of worst case is recorded in the report.
7.3.2 Test Setup Diagram
7.3.3 Measurement Procedure and Data
The detailed test data see: Appendix 15.247
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
22 of 101
7.4 Carrier Frequencies Separation
Test Requirement
Test Method:
Limit:
47 CFR Part 15, Subpart C 15.247a(1)
ANSI C63.10 (2013) Section 7.8.2
2/3 of the 20dB bandwidth base on the transmission power is less than
0.125W
7.4.1 E.U.T. Operation
Operating Environment:
Temperature:
23 °C
Atmospheric Pressure:
1020 mbar
Humidity: 56 % RH
Test mode
b:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK
modulation, π/4DQPSK modulation, 8DPSK modulation. All modes have been
tested and only the data of worst case is recorded in the report.
7.4.2 Test Setup Diagram
7.4.3 Measurement Procedure and Data
The detailed test data see: Appendix 15.247
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
23 of 101
7.5 Hopping Channel Number
Test Requirement
Test Method:
Limit:
47 CFR Part 15, Subpart C 15.247a(1)(iii)
ANSI C63.10 (2013) Section 7.8.3
Frequency range(MHz)
902-928
2400-2483.5
5725-5850
Number of hopping channels (minimum)
50 for 20dB bandwidth <250kHz
25 for 20dB bandwidth ≥250kHz
15
75
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
24 of 101
7.5.1 E.U.T. Operation
Operating Environment:
Temperature:
23 °C
Atmospheric Pressure:
1020 mbar
Humidity: 56 % RH
Test mode
a:TX_Hop mode_Keep the EUT in frequency hopping mode with GFSK modulation,
π/4DQPSK modulation, 8DPSK modulation. All modes have been tested and only
the data of worst case is recorded in the report.
7.5.2 Test Setup Diagram
7.5.3 Measurement Procedure and Data
The detailed test data see: Appendix 15.247
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
25 of 101
7.6 Dwell Time
Test Requirement
Test Method:
Limit:
Frequency(MHz)
902-928
2400-2483.5
5725-5850
47 CFR Part 15, Subpart C 15.247a(1)(iii)
ANSI C63.10 (2013) Section 7.8.4
Limit
0.4S within a 20S period(20dB bandwidth<250kHz)
0.4S within a 10S period(20dB bandwidth≥250kHz)
0.4S within a period of 0.4S multiplied by the number
of hopping channels
0.4S within a 30S period
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
26 of 101
7.6.1 E.U.T. Operation
Operating Environment:
Temperature:
23 °C
Atmospheric Pressure:
1020 mbar
Humidity: 56 % RH
Test mode
a:TX_Hop mode_Keep the EUT in frequency hopping mode with GFSK modulation,
π/4DQPSK modulation, 8DPSK modulation. All modes have been tested and only
the data of worst case is recorded in the report.
7.6.2 Test Setup Diagram
7.6.3 Measurement Procedure and Data
The detailed test data see: Appendix 15.247
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
27 of 101
7.7 Conducted Band Edges Measurement
Test Requirement
47 CFR Part 15, Subpart C 15.247(d)
Test Method:
ANSI C63.10 (2013) Section 7.8.6
7.7.1 E.U.T. Operation
Operating Environment:
Temperature:
23 °C
Atmospheric Pressure:
1020 mbar
Humidity: 56 % RH
Test mode
b:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK
modulation, π/4DQPSK modulation, 8DPSK modulation. All modes have been
tested and only the data of worst case is recorded in the report.
7.7.2 Test Setup Diagram
7.7.3 Measurement Procedure and Data
The detailed test data see: Appendix 15.247
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
28 of 101
7.8 Conducted Spurious Emissions
Test Requirement
Test Method:
Limit:
47 CFR Part 15, Subpart C 15.247(d)
ANSI C63.10 (2013) Section 7.8.8
In any 100 kHz bandwidth outside the frequency band in which the spread
spectrum intentional radiator is operating, the radio frequency power that is
produced by the intentional radiator shall be at least 20 dB below that in the
100 kHz bandwidth within the band that contains the highest level of the
desired power, based on either an RF conducted or a radiated
measurement.
7.8.1 E.U.T. Operation
Operating Environment:
Temperature:
23 °C
Atmospheric Pressure:
1020 mbar
Humidity: 56 % RH
Test mode
b:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK
modulation, π/4DQPSK modulation, 8DPSK modulation. All modes have been
tested and only the data of worst case is recorded in the report.
7.8.2 Test Setup Diagram
7.8.3 Measurement Procedure and Data
The detailed test data see: Appendix 15.247
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
29 of 101
7.9 Radiated Emissions which fall in the restricted bands
Test Requirement
Test Method:
Measurement Distance:
Limit:
47 CFR Part 15, Subpart C 15.205 & 15.209
ANSI C63.10 (2013) Section 6.10.5
3m
7.9.1 E.U.T. Operation
Operating Environment:
Temperature:
23 °C
Atmospheric Pressure:
1020 mbar
Humidity: 54 % RH
Pretest these
b:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK
mode to find the modulation, π/4DQPSK modulation, 8DPSK modulation. All modes have been
worst case:
tested and only the data of worst case is recorded in the report.
c:Charge + TX_non-Hop mode_Keep the EUT in charging and continuously
transmitting mode with GFSK modulation, π/4DQPSK modulation, 8DPSK
modulation. All modes have been tested and only the data of worst case is recorded
in the report.
The worst case
for final test:
c:Charge + TX_non-Hop mode_Keep the EUT in charging and continuously
transmitting mode with GFSK modulation, π/4DQPSK modulation, 8DPSK
modulation. All modes have been tested and only the data of worst case is recorded
in the report.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
30 of 101
7.9.2 Test Setup Diagram
7.9.3 Measurement Procedure and Data
a. For below 1GHz, the EUT was placed on the top of a rotating table 0.8 meters above the ground at a
3 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the
highest radiation.
b. For above 1GHz, the EUT was placed on the top of a rotating table 1.5 meters above the ground at
a 3 meter fully-anechoic chamber. The table was rotated 360 degrees to determine the position of the
highest radiation.
c. The EUT was set 3 or 10 meters away from the interference-receiving antenna, which was mounted
on the top of a variable-height antenna tower.
d. The antenna height is varied from one meter to four meters above the ground to determine the
maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set
to make the measurement.
e. For each suspected emission, the EUT was arranged to its worst case and then the antenna was
tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was
tuned to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the
maximum reading.
f. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum
Hold Mode.
g. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing
could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did
not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as
specified and then reported in a data sheet.
h. Test the EUT in the lowest channel,the middle channel,the Highest channel.
i. The radiation measurements are performed in X, Y, Z axis positioning for Transmitting mode, and
found the X axis positioning which it is the worst case.
j. Repeat above procedures until all frequencies measured was complete.
Remark: Level= Read Level+ Cable Loss+ Antenna Factor- Preamp Factor
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
31 of 101
Mode:c; Polarization:Horizontal; Modulation Type:GFSK; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
32 of 101
Mode:c; Polarization:Vertical; Modulation Type:GFSK; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
33 of 101
Mode:c; Polarization:Horizontal; Modulation Type:GFSK; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
34 of 101
Mode:c; Polarization:Vertical; Modulation Type:GFSK; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
35 of 101
7.10 Radiated Spurious Emissions
Test Requirement
Test Method:
Measurement Distance:
Limit:
Frequency(MHz)
47 CFR Part 15, Subpart C 15.205 & 15.209
ANSI C63.10 (2013) Section 6.4,6.5,6.6
3m
Field
strength(microvolts/meter)
Measurement
distance(meters)
0.009-0.490
2400/F(kHz)
300
0.490-1.705
24000/F(kHz)
30
1.705-30.0
30
30
30-88
100
88-216
150
216-960
200
Above 960
500
Remark: The emission limits shown in the above table are based on measurements employing a
CISPR quasi-peak detector except for the frequency bands 9-90kHz, 110-490kHz and above 1000
MHz. Radiated emission limits in these three bands are based on measurements employing an
average detector, the peak field strength of any emission shall not exceed the maximum permitted
average limits specified above by more than 20 dB under any condition of modulation.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
36 of 101
7.10.1 E.U.T. Operation
Operating Environment:
Temperature:
23 °C
Atmospheric Pressure:
1020 mbar
Humidity: 54 % RH
Pretest these
b:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK
mode to find the modulation, π/4DQPSK modulation, 8DPSK modulation. All modes have been
worst case:
tested and only the data of worst case is recorded in the report.
c:Charge + TX_non-Hop mode_Keep the EUT in charging and continuously
transmitting mode with GFSK modulation, π/4DQPSK modulation, 8DPSK
modulation. All modes have been tested and only the data of worst case is recorded
in the report.
The worst case
for final test:
c:Charge + TX_non-Hop mode_Keep the EUT in charging and continuously
transmitting mode with GFSK modulation, π/4DQPSK modulation, 8DPSK
modulation. All modes have been tested and only the data of worst case is recorded
in the report.
7.10.2 Test Setup Diagram
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
37 of 101
7.10.3 Measurement Procedure and Data
a. For below 1GHz, the EUT was placed on the top of a rotating table 0.8 meters above the ground at a
3 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the
highest radiation.
b. For above 1GHz, the EUT was placed on the top of a rotating table 1.5 meters above the ground at
a 3 meter fully-anechoic chamber. The table was rotated 360 degrees to determine the position of the
highest radiation.
c. The EUT was set 3 or 10 meters away from the interference-receiving antenna, which was mounted
on the top of a variable-height antenna tower.
d. The antenna height is varied from one meter to four meters above the ground to determine the
maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set
to make the measurement.
e. For each suspected emission, the EUT was arranged to its worst case and then the antenna was
tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was
tuned to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the
maximum reading.
f. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum
Hold Mode.
g. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing
could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did
not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as
specified and then reported in a data sheet.
h. Test the EUT in the lowest channel,the middle channel,the Highest channel.
i. The radiation measurements are performed in X, Y, Z axis positioning for Transmitting mode, and
found the X axis positioning which it is the worst case.
j. Repeat above procedures until all frequencies measured was complete.
Remark: Level= Read Level+ Cable Loss+ Antenna Factor- Preamp Factor
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
38 of 101
Below 1G:
Detector:QP
Mode:c; Polarization:Horizontal
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
39 of 101
Mode:c; Polarization:Vertical
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
40 of 101
Above 1G
Detector:Peak
Mode:c; Polarization:Horizontal; Modulation Type:GFSK; hannel:Low
Freq
(MHz)
1646.948
3184.250
4804.000
7206.000
9608.000
12086.330
Antenna
_Factor
(dB/m)
26.45
31.65
34.16
36.42
37.52
38.65
Cable
Preamp
_Loss (dB) _Gain (dB)
4.65
6.07
7.73
9.65
11.06
12.53
38.04
37.92
38.40
37.11
35.10
35.81
Read
_Level
(dBuV)
43.97
44.74
46.90
41.82
38.29
36.96
Level
(dBuV/m)
37.55
45.18
50.78
51.04
52.22
53.07
Limit
Over
_Line
_Limit (dB)
(dBuV/m)
74
-36.45
74
-28.82
74
-23.22
74
-22.96
74
-21.78
74
-20.93
Mode:c; Polarization: Vertical; Modulation Type:GFSK; hannel:Low
Freq
(MHz)
Antenna
_Factor
(dB/m)
1333.284
25.10
4.26
2050.000
27.98
4804.000
Read
_Level
(dBuV)
Level
(dBuV/m)
38.07
47.37
39.16
74
-34.84
5.06
37.99
43.95
40.35
74
-33.65
34.16
7.73
38.40
46.50
50.38
74
-23.62
7206.000
36.42
9.65
37.11
42.17
51.39
74
-22.61
9608.000
37.52
11.06
35.10
38.33
52.26
74
-21.74
12148.020
38.69
12.62
35.96
37.11
53.18
74
-20.82
Cable
Preamp
_Loss (dB) _Gain (dB)
Limit
Over
_Line
_Limit (dB)
(dBuV/m)
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
41 of 101
Mode:c; Polarization:Horizontal; Modulation Type:GFSK; Channel:middle
Freq
(MHz)
Antenna
_Factor
(dB/m)
Cable
_Loss
(dB)
Preamp
_Gain
(dB)
Read
_Level
(dBuV)
Level
(dBuV/m)
Limit
_Line
(dBuV/m)
Over
_Limit
(dB)
1388.708
3192.366
4882.000
7323.000
9764.000
12429.540
25.34
31.66
34.30
36.37
37.55
38.86
4.34
6.08
7.84
9.73
11.21
13.04
38.06
37.92
38.44
37.01
35.02
36.63
44.65
45.32
47.18
42.58
37.85
37.77
36.76
45.78
51.29
51.90
52.05
53.67
74
74
74
74
74
74
-37.24
-28.22
-22.71
-22.10
-21.95
-20.33
Mode:c; Polarization:Vertical; Modulation Type:GFSK; Channel:middle
Freq
(MHz)
1755.164
3489.840
4882.000
7323.000
9764.000
12272.340
Antenna
_Factor
(dB/m)
26.89
32.18
34.30
36.37
37.55
38.76
Cable
Preamp
_Loss (dB) _Gain (dB)
4.76
6.29
7.84
9.73
11.21
12.81
38.02
37.95
38.44
37.01
35.02
36.25
Read
_Level
(dBuV)
43.67
44.88
48.39
41.86
38.07
37.59
Level
(dBuV/m)
37.91
45.94
52.50
51.18
52.27
53.59
Limit
Over
_Line
_Limit (dB)
(dBuV/m)
74
-36.09
74
-28.06
74
-21.50
74
-22.82
74
-21.73
74
-20.41
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
42 of 101
Mode:c; Polarization:Horizontal; Modulation Type:GFSK; Channel:High
Freq
(MHz)
1350.362
1913.838
3258.042
4960.000
7440.000
9920.000
Antenna
_Factor
(dB/m)
25.18
27.49
31.78
34.43
36.32
37.58
Cable
Preamp
_Loss (dB) _Gain (dB)
4.29
4.93
6.13
7.95
9.81
11.36
38.06
38.01
37.93
38.48
36.90
34.94
Read
_Level
(dBuV)
44.16
44.36
45.00
46.70
43.51
38.80
Level
(dBuV/m)
36.07
39.75
45.59
51.03
52.96
53.26
Limit
Over
_Line
_Limit (dB)
(dBuV/m)
74
-37.93
74
-34.25
74
-28.41
74
-22.97
74
-21.04
74
-20.74
Mode:c; Polarization:Vertical; Modulation Type:GFSK; Channel:High
Freq
(MHz)
1498.912
3003.173
4960.000
7440.000
9920.000
12210.020
Antenna
_Factor
(dB/m)
25.80
31.31
34.43
36.32
37.58
38.73
Cable
Preamp
_Loss (dB) _Gain (dB)
4.47
5.93
7.95
9.81
11.36
12.71
38.05
37.90
38.48
36.90
34.94
36.10
Read
_Level
(dBuV)
48.68
44.82
48.92
44.97
38.50
37.11
Level
(dBuV/m)
41.38
45.32
53.25
54.42
52.96
53.15
Limit
Over
_Line
_Limit (dB)
(dBuV/m)
74
-32.62
74
-28.68
74
-20.75
74
-19.58
74
-21.04
74
-20.85
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
43 of 101
Photographs
8.1 Conducted Emissions at AC Power Line (150kHz-30MHz) Test Setup
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
44 of 101
8.2 Radiated Spurious Emissions Test Setup
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
45 of 101
8.3 EUT Constructional Details
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
46 of 101
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
47 of 101
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
48 of 101
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
49 of 101
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
50 of 101
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
51 of 101
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
52 of 101
Appendix
9.1 Appendix 15.247
1.20 dB Bandwidth
Test Mode
Test Channel
EBW[MHz]
Limit[MHz]
Verdict
DH5
2402
0.950
---
PASS
DH5
2441
0.948
---
PASS
DH5
2480
0.950
---
PASS
2DH5
2402
1.278
---
PASS
2DH5
2441
1.242
---
PASS
2DH5
2480
1.244
---
PASS
3DH5
2402
1.286
---
PASS
3DH5
2441
1.268
---
PASS
3DH5
2480
1.264
---
PASS
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
53 of 101
20 dB Bandwidth_DH5_2402
* RBW
30 kHz
* VBW
Ref
10
* Att
10 dBm
Offset
100 kHz
SWT 10 ms
10 dB
Marker 3 [T1 ]
-27.82 dBm
2.402498000 GHz
Marker 1 [T1 ]
0.9 dB
-7.16 dBm
2.402012000 GHz
Marker 2 [T1 ]
1 PK
VIEW
-27.29 dBm
2.401548000 GHz
-10
LVL
-20
D1 -27.16 dBm
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.402 GHz
200 kHz/
Span
2 MHz
20 dB Bandwidth_DH5_2441
* RBW
* VBW
Ref
10
* Att
10 dBm
Offset
100 kHz
SWT 10 ms
10 dB
Marker 3 [T1 ]
-24.87 dBm
2.441494000 GHz
Marker 1 [T1 ]
0.9 dB
30 kHz
-4.82 dBm
2.441014000 GHz
Marker 2 [T1 ]
1 PK
VIEW
-24.91 dBm
2.440546000 GHz
-10
-20
LVL
D1 -24.82 dBm
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.441 GHz
200 kHz/
Span
2 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
54 of 101
20 dB Bandwidth_DH5_2480
* RBW
30 kHz
* VBW
Ref
10
* Att
10 dBm
Offset
100 kHz
SWT 10 ms
10 dB
Marker 3 [T1 ]
-24.97 dBm
2.480496000 GHz
Marker 1 [T1 ]
0.9 dB
-4.93 dBm
2.480018000 GHz
Marker 2 [T1 ]
1 PK
VIEW
-25.11 dBm
2.479546000 GHz
-10
-20
LVL
D1 -24.93 dBm
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.48 GHz
200 kHz/
Span
2 MHz
20 dB Bandwidth_2DH5_2402
* RBW
* VBW
Ref
10
* Att
10 dBm
Offset
30 kHz
100 kHz
SWT 10 ms
10 dB
Marker 3 [T1 ]
-30.37 dBm
2.402666000 GHz
Marker 1 [T1 ]
0.9 dB
-10.13 dBm
2.402022000 GHz
Marker 2 [T1 ]
1 PK
VIEW
-10
-30.41 dBm
2.401388000 GHz
LVL
-20
-30
D1 -30.13 dBm
-40
3DB
-50
-60
-70
-80
-90
Center
2.402 GHz
200 kHz/
Span
2 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
55 of 101
20 dB Bandwidth_2DH5_2441
* RBW
30 kHz
* VBW
Ref
10
* Att
10 dBm
Offset
100 kHz
SWT 10 ms
10 dB
Marker 3 [T1 ]
-27.40 dBm
2.441626000 GHz
Marker 1 [T1 ]
0.9 dB
-7.27 dBm
2.441016000 GHz
Marker 2 [T1 ]
1 PK
VIEW
-27.37 dBm
2.440384000 GHz
-10
LVL
-20
D1 -27.27 dBm
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.441 GHz
200 kHz/
Span
2 MHz
20 dB Bandwidth_2DH5_2480
* RBW
* VBW
Ref
10
* Att
10 dBm
Offset
100 kHz
SWT 10 ms
10 dB
Marker 3 [T1 ]
-27.51 dBm
2.480626000 GHz
Marker 1 [T1 ]
0.9 dB
1 PK
VIEW
30 kHz
-7.44 dBm
2.480016000 GHz
Marker 2 [T1 ]
-28.16 dBm
2.479382000 GHz
-10
LVL
-20
D1 -27.44 dBm
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.48 GHz
200 kHz/
Span
2 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
56 of 101
20 dB Bandwidth_3DH5_2402
* RBW
30 kHz
* VBW
Ref
10
* Att
10 dBm
Offset
100 kHz
SWT 10 ms
10 dB
Marker 3 [T1 ]
-30.34 dBm
2.402656000 GHz
Marker 1 [T1 ]
0.9 dB
-10.04 dBm
2.402010000 GHz
Marker 2 [T1 ]
1 PK
VIEW
-30.28 dBm
2.401370000 GHz
-10
LVL
-20
D1 -30.04 dBm
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.402 GHz
200 kHz/
Span
2 MHz
20 dB Bandwidth_3DH5_2441
* RBW
* VBW
Ref
10
* Att
10 dBm
Offset
100 kHz
SWT 10 ms
10 dB
Marker 3 [T1 ]
-27.38 dBm
2.441634000 GHz
Marker 1 [T1 ]
0.9 dB
1 PK
VIEW
30 kHz
-7.32 dBm
2.441018000 GHz
Marker 2 [T1 ]
-27.32 dBm
2.440366000 GHz
-10
LVL
-20
D1 -27.32 dBm
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.441 GHz
200 kHz/
Span
2 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
57 of 101
20 dB Bandwidth_3DH5_2480
* RBW
* VBW
Ref
10
* Att
10 dBm
Offset
100 kHz
SWT 10 ms
10 dB
Marker 3 [T1 ]
-27.50 dBm
2.480634000 GHz
Marker 1 [T1 ]
0.9 dB
1 PK
VIEW
30 kHz
-7.41 dBm
2.480018000 GHz
Marker 2 [T1 ]
-27.47 dBm
2.479370000 GHz
-10
LVL
-20
D1 -27.41 dBm
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.48 GHz
200 kHz/
Span
2 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
58 of 101
2.Conducted Peak Output Power
Test Mode
Test Channel
Power[dBm]
Limit[dBm]
Verdict
DH5
2402
-5.02
<20.97
PASS
DH5
2441
-2.8
<20.97
PASS
DH5
2480
-2.87
<20.97
PASS
2DH5
2402
-7.14
<20.97
PASS
2DH5
2441
-4.66
<20.97
PASS
2DH5
2480
-4.76
<20.97
PASS
3DH5
2402
-6.87
<20.97
PASS
3DH5
2441
-4.31
<20.97
PASS
3DH5
2480
-4.41
<20.97
PASS
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
59 of 101
Conducted Peak Output Power_DH5_2402
* RBW
3 MHz
* VBW
Ref
10
* Att
10 dBm
Offset
10 MHz
SWT 5 ms
10 dB
Marker 1 [T1 ]
-5.02 dBm
2.402150000 GHz
0.9 dB
SGL
1 PK
MAXH
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.402 GHz
2.5 MHz/
Span
25 MHz
Conducted Peak Output Power_DH5_2441
* RBW
* VBW
Ref
10
* Att
10 dBm
Offset
3 MHz
10 MHz
SWT 5 ms
10 dB
Marker 1 [T1 ]
-2.80 dBm
2.440950000 GHz
0.9 dB
SGL
1 PK
MAXH
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.441 GHz
2.5 MHz/
Span
25 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
60 of 101
Conducted Peak Output Power_DH5_2480
* RBW
3 MHz
* VBW
Ref
10
* Att
10 dBm
Offset
10 MHz
SWT 5 ms
10 dB
Marker 1 [T1 ]
-2.87 dBm
2.479875000 GHz
0.9 dB
SGL
1 PK
MAXH
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.48 GHz
2.5 MHz/
Span
25 MHz
Conducted Peak Output Power_2DH5_2402
* RBW
* VBW
Ref
10
* Att
10 dBm
Offset
3 MHz
10 MHz
SWT 5 ms
10 dB
Marker 1 [T1 ]
-7.14 dBm
2.402150000 GHz
0.9 dB
SGL
1 PK
MAXH
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.402 GHz
2.5 MHz/
Span
25 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
61 of 101
Conducted Peak Output Power_2DH5_2441
* RBW
3 MHz
* VBW
Ref
10
* Att
10 dBm
Offset
10 MHz
SWT 5 ms
10 dB
Marker 1 [T1 ]
-4.66 dBm
2.440700000 GHz
0.9 dB
SGL
1 PK
MAXH
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.441 GHz
2.5 MHz/
Span
25 MHz
Conducted Peak Output Power_2DH5_2480
* RBW
* VBW
Ref
10
* Att
10 dBm
Offset
3 MHz
10 MHz
SWT 5 ms
10 dB
Marker 1 [T1 ]
-4.76 dBm
2.479875000 GHz
0.9 dB
SGL
1 PK
MAXH
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.48 GHz
2.5 MHz/
Span
25 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
62 of 101
Conducted Peak Output Power_3DH5_2402
* RBW
3 MHz
* VBW
Ref
10
* Att
10 dBm
Offset
10 MHz
SWT 5 ms
10 dB
Marker 1 [T1 ]
-6.87 dBm
2.402100000 GHz
0.9 dB
SGL
1 PK
MAXH
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.402 GHz
2.5 MHz/
Span
25 MHz
Conducted Peak Output Power_3DH5_2441
* RBW
* VBW
Ref
10
* Att
10 dBm
Offset
3 MHz
10 MHz
SWT 5 ms
10 dB
Marker 1 [T1 ]
-4.31 dBm
2.440950000 GHz
0.9 dB
SGL
1 PK
MAXH
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.441 GHz
2.5 MHz/
Span
25 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
63 of 101
Conducted Peak Output Power_3DH5_2480
* RBW
* VBW
Ref
10
* Att
10 dBm
Offset
3 MHz
10 MHz
SWT 5 ms
10 dB
Marker 1 [T1 ]
-4.41 dBm
2.479925000 GHz
0.9 dB
SGL
1 PK
MAXH
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.48 GHz
2.5 MHz/
Span
25 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
64 of 101
3.Carrier Frequency Separation
Test Mode
Test Channel
Result[MHz]
Limit[MHz]
Verdict
DH5
2441
1.005
>=0.634
PASS
2DH5
2441
1.011
>=0.852
PASS
3DH5
2441
1.164
>=0.858
PASS
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
65 of 101
Carrier Frequency Separation_DH5_2441
* RBW
100 kHz
Delta 1 [T1 ]
0.02 dB
1.005000000 MHz
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
300 kHz
SWT 5 ms
Marker 1 [T1 ]
0.9 dB
-3.62 dBm
2.441176000 GHz
1 PK
VIEW
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.44 GHz
300 kHz/
Stop
2.443 GHz
Carrier Frequency Separation_2DH5_2441
* RBW
100 kHz
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
300 kHz
SWT 5 ms
Delta 1 [T1 ]
0.12 dB
1.011000000 MHz
Marker 1 [T1 ]
0.9 dB
-6.74 dBm
2.441005000 GHz
1 PK
VIEW
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.44 GHz
300 kHz/
Stop
2.443 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
66 of 101
Carrier Frequency Separation_3DH5_2441
* RBW
100 kHz
Delta 1 [T1 ]
-0.06 dB
1.164000000 MHz
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
300 kHz
SWT 5 ms
Marker 1 [T1 ]
0.9 dB
-6.59 dBm
2.441020000 GHz
1 PK
VIEW
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.44 GHz
300 kHz/
Stop
2.443 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
67 of 101
4.Dwell Time
Test
Mode
Test
Channel
Burst
Width[ms/hop/ch]
Total
Hops[hop*ch]
DH1
2402
0.4
320
0.128
<0.4
PASS
DH3
2402
1.66
160
0.266
<0.4
PASS
DH5
2402
2.9
110
0.319
<0.4
PASS
2DH1
2402
0.41
320
0.131
<0.4
PASS
2DH3
2402
1.67
160
0.267
<0.4
PASS
2DH5
2402
2.91
110
0.32
<0.4
PASS
3DH1
2402
0.41
310
0.127
<0.4
PASS
3DH3
2402
1.67
160
0.267
<0.4
PASS
3DH5
2402
2.91
100
0.291
<0.4
PASS
Dwell Time[s] Limit[s]
Verdict
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
68 of 101
Dwell Time_DH1_2402
RBW 1 MHz
* VBW
Ref
* Att
10 dBm
10 dB
3 MHz
SWT 3 ms
Delta 1 [T1 ]
0.88 dB
396.000000 µs
Marker 1 [T1 ]
10
-12.71 dBm
-3.000000 µs
1 PK *
VIEW
TRG
-10
SGL
TRG -15.5 dBm
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
300 µs/
RBW 1 MHz
* VBW
Ref
10 dBm
* Att
10 dB
3 MHz
SWT 3.16 s
10
SGL
1 PK *
CLRWR
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
316 ms/
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
69 of 101
Dwell Time_DH3_2402
RBW 1 MHz
* VBW
Ref
* Att
10 dBm
10 dB
3 MHz
SWT 5 ms
Delta 1 [T1 ]
1.09 dB
1.660000 ms
Marker 1 [T1 ]
10
-11.50 dBm
5.000000 µs
1 PK *
VIEW
-10
SGL
TRG
TRG -15.5 dBm
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
500 µs/
RBW 1 MHz
* VBW
Ref
10 dBm
* Att
10 dB
3 MHz
SWT 3.16 s
10
SGL
1 PK *
CLRWR
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
316 ms/
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
70 of 101
Dwell Time_DH5_2402
RBW 1 MHz
* VBW
Ref
* Att
10 dBm
10 dB
3 MHz
SWT 8 ms
Delta 1 [T1 ]
-0.10 dB
2.904000 ms
Marker 1 [T1 ]
10
-9.58 dBm
0.000000 s
1 PK *
VIEW
SGL
TRG
-10
TRG -15.5 dBm
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
800 µs/
RBW 1 MHz
* VBW
Ref
10 dBm
* Att
10 dB
3 MHz
SWT 3.16 s
10
SGL
1 PK *
CLRWR
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
316 ms/
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
71 of 101
Dwell Time_2DH1_2402
RBW 1 MHz
* VBW
Ref
* Att
10 dBm
10 dB
3 MHz
SWT 3 ms
Delta 1 [T1 ]
-1.08 dB
411.000000 µs
Marker 1 [T1 ]
10
-12.79 dBm
-3.000000 µs
1 PK *
VIEW
TRG
-10
SGL
TRG -14.9 dBm
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
300 µs/
RBW 1 MHz
* VBW
Ref
10 dBm
* Att
10 dB
3 MHz
SWT 3.16 s
10
SGL
1 PK *
CLRWR
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
316 ms/
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
72 of 101
Dwell Time_2DH3_2402
RBW 1 MHz
* VBW
Ref
* Att
10 dBm
10 dB
3 MHz
SWT 5 ms
Delta 1 [T1 ]
-1.06 dB
1.665000 ms
Marker 1 [T1 ]
10
-10.00 dBm
10.000000 µs
1 PK *
VIEW
SGL
TRG
-10
TRG -14.8 dBm
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
500 µs/
RBW 1 MHz
* VBW
Ref
10 dBm
* Att
10 dB
3 MHz
SWT 3.16 s
10
SGL
1 PK *
CLRWR
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
316 ms/
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
73 of 101
Dwell Time_2DH5_2402
RBW 1 MHz
* VBW
Ref
* Att
10 dBm
10 dB
3 MHz
SWT 8 ms
Delta 1 [T1 ]
-1.18 dB
2.912000 ms
Marker 1 [T1 ]
10
-9.65 dBm
-328.000000 µs
1 PK *
VIEW
SGL
TRG
-10
TRG -14.9 dBm
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
800 µs/
RBW 1 MHz
* VBW
Ref
10 dBm
* Att
10 dB
3 MHz
SWT 3.16 s
10
SGL
1 PK *
CLRWR
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
316 ms/
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
74 of 101
Dwell Time_3DH1_2402
RBW 1 MHz
* VBW
Ref
* Att
10 dBm
10 dB
3 MHz
SWT 3 ms
Delta 1 [T1 ]
0.76 dB
408.000000 µs
Marker 1 [T1 ]
10
-12.83 dBm
-3.000000 µs
1 PK *
VIEW
TRG
-10
SGL
TRG -14.3 dBm
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
300 µs/
RBW 1 MHz
* VBW
Ref
10 dBm
* Att
10 dB
3 MHz
SWT 3.16 s
10
SGL
1 PK *
CLRWR
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
316 ms/
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
75 of 101
Dwell Time_3DH3_2402
RBW 1 MHz
* VBW
Ref
* Att
10 dBm
10 dB
3 MHz
SWT 5 ms
Delta 1 [T1 ]
1.58 dB
1.665000 ms
Marker 1 [T1 ]
10
-12.18 dBm
5.000000 µs
1 PK *
VIEW
-10
SGL
TRG
TRG -14.3 dBm
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
500 µs/
RBW 1 MHz
* VBW
Ref
10 dBm
* Att
10 dB
3 MHz
SWT 3.16 s
10
SGL
1 PK *
CLRWR
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
316 ms/
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
76 of 101
Dwell Time_3DH5_2402
RBW 1 MHz
* VBW
Ref
* Att
10 dBm
10 dB
3 MHz
SWT 8 ms
Delta 1 [T1 ]
-0.97 dB
2.912000 ms
Marker 1 [T1 ]
10
-9.62 dBm
8.000000 µs
1 PK *
VIEW
SGL
TRG
-10
TRG -14.3 dBm
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
800 µs/
RBW 1 MHz
* VBW
Ref
10 dBm
* Att
10 dB
3 MHz
SWT 3.16 s
10
SGL
1 PK *
CLRWR
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
316 ms/
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
77 of 101
5.Hopping Channel Number
Test Mode
Test Channel
Number of Hopping Channel[N]
Limit[N] Verdict
DH5
2402
79
>=15
PASS
2DH5
2402
79
>=15
PASS
3DH5
2402
79
>=15
PASS
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
78 of 101
Hopping Channel Number_DH5_2402
* RBW
100 kHz
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
300 kHz
SWT 10 ms
Delta 1 [T1 ]
1.49 dB
77.822000000 MHz
Marker 1 [T1 ]
0.9 dB
-5.69 dBm
2.402171000 GHz A
SGL
1 PK
MAXH
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
8.35 MHz/
Stop
2.4835 GHz
Hopping Channel Number_2DH5_2402
* RBW
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
300 kHz
SWT 10 ms
Delta 1 [T1 ]
0.81 dB
78.072500000 MHz
Marker 1 [T1 ]
0.9 dB
-9.21 dBm
2.402004000 GHz
1 PK
MAXH
100 kHz
SGL
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
8.35 MHz/
Stop
2.4835 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
79 of 101
Hopping Channel Number_3DH5_2402
* RBW
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
300 kHz
SWT 10 ms
Delta 1 [T1 ]
0.47 dB
77.905500000 MHz
Marker 1 [T1 ]
0.9 dB
-9.11 dBm
2.402171000 GHz
1 PK
MAXH
100 kHz
SGL
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
8.35 MHz/
Stop
2.4835 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
80 of 101
6.Band-edge for RF Conducted Emissions
Test
Mode
Test
Channel
Hopping
Carrier
Power[dBm]
Max. Spurious Level
[dBm]
DH5
2402
Off
-5.910
-63.635
<-25.91
PASS
DH5
2480
Off
-3.750
-60.080
<-23.75
PASS
2DH5
2402
Off
-10.300
-65.840
<-30.3
PASS
2DH5
2480
Off
-7.210
-63.582
<-27.21
PASS
3DH5
2402
Off
-9.080
-65.014
<-29.08
PASS
3DH5
2480
Off
-6.910
-63.028
<-26.91
PASS
DH5
2402
On
-8.350
-53.477
<-28.35
PASS
DH5
2480
On
-4.380
-57.203
<-24.38
PASS
2DH5
2402
On
-10.290
-63.635
<-30.29
PASS
2DH5
2480
On
-7.000
-61.043
<-27
PASS
3DH5
2402
On
-11.460
-63.425
<-31.46
PASS
3DH5
2480
On
-7.520
-59.803
<-27.52
PASS
Limit[dBm
Verdict
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
81 of 101
Band-edge for RF Conducted Emissions_DH5_2402_Hopping Off
* RBW
100 kHz
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
300 kHz
SWT 10 ms
Marker 4 [T1 ]
-63.63 dBm
2.350032000 GHz
Marker 1 [T1 ]
0.9 dB
-5.91 dBm
2.402064000 GHz A
SGL
Marker 2 [T1 ]
1 PK
MAXH
-60.54 dBm
2.400000000 GHz
-10
LVL
Marker 3 [T1 ]
-68.68 dBm
-20
2.390000000 GHz
D1 -25.91 dBm
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.31 GHz
9.6 MHz/
Stop
2.406 GHz
Band-edge for RF Conducted Emissions_DH5_2480_Hopping Off
* RBW
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
100 kHz
300 kHz
SWT 10 ms
Marker 4 [T1 ]
-60.08 dBm
2.484184000 GHz
Marker 1 [T1 ]
0.9 dB
-3.75 dBm
2.479864000 GHz A
SGL
Marker 2 [T1 ]
1 PK
MAXH
-65.41 dBm
2.483500000 GHz
-10
LVL
Marker 3 [T1 ]
-69.70 dBm
-20
2.500000000 GHz
D1 -23.75 dBm
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.476 GHz
2.4 MHz/
Stop
2.5 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
82 of 101
Band-edge for RF Conducted Emissions_2DH5_2402_Hopping Off
* RBW
100 kHz
Marker 4 [T1 ]
-65.84 dBm
2.376144000 GHz
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
300 kHz
SWT 10 ms
Marker 1 [T1 ]
0.9 dB
-10.30 dBm
2.402064000 GHz A
SGL
Marker 2 [T1 ]
1 PK
MAXH
-59.14 1
dBm
2.400000000 GHz
-10
LVL
Marker 3 [T1 ]
-68.32 dBm
-20
2.390000000 GHz
-30
D1 -30.3 dBm
-40
3DB
-50
-60
-70
-80
-90
Start
2.31 GHz
9.6 MHz/
Stop
2.406 GHz
Band-edge for RF Conducted Emissions_2DH5_2480_Hopping Off
* RBW
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
300 kHz
SWT 10 ms
Marker 4 [T1 ]
-63.58 dBm
2.483968000 GHz
Marker 1 [T1 ]
0.9 dB
-7.21 dBm
2.480008000 GHz A
SGL
Marker 2 [T1 ]
1 PK
MAXH
100 kHz
-66.77 dBm
2.483500000 GHz
-10
LVL
Marker 3 [T1 ]
-69.47 dBm
-20
2.500000000 GHz
D1 -27.21 dBm
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.476 GHz
2.4 MHz/
Stop
2.5 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
83 of 101
Band-edge for RF Conducted Emissions_3DH5_2402_Hopping Off
* RBW
100 kHz
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
300 kHz
SWT 10 ms
Marker 4 [T1 ]
-65.01 dBm
2.384592000 GHz
Marker 1 [T1 ]
0.9 dB
-9.08 dBm
2.402064000 GHz A
SGL
Marker 2 [T1 ]
-59.65 1
dBm
1 PK
MAXH
2.400000000 GHz
-10
LVL
Marker 3 [T1 ]
-68.17 dBm
-20
2.390000000 GHz
D1 -29.08 dBm
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.31 GHz
9.6 MHz/
Stop
2.406 GHz
Band-edge for RF Conducted Emissions_3DH5_2480_Hopping Off
* RBW
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
300 kHz
SWT 10 ms
Marker 4 [T1 ]
-63.03 dBm
2.484040000 GHz
0.9 dB
Marker 1 [T1 ]
-6.91 dBm
2.480032000 GHz A
SGL
Marker 2 [T1 ]
1 PK
MAXH
100 kHz
-64.22 dBm
2.483500000 GHz
-10
LVL
Marker 3 [T1 ]
-67.20 dBm
-20
2.500000000 GHz
D1 -26.91 dBm
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.476 GHz
2.4 MHz/
Stop
2.5 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
84 of 101
Band-edge for RF Conducted Emissions_DH5_2402_Hopping On
* RBW
100 kHz
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
300 kHz
SWT 10 ms
Marker 4 [T1 ]
-53.48 dBm
2.317968000 GHz
Marker 1 [T1 ]
0.9 dB
-8.35 dBm
2.406000000 GHz A
SGL
Marker 2 [T1 ]
-67.91 dBm1
1 PK
MAXH
2.400000000 GHz
-10
LVL
Marker 3 [T1 ]
-67.68 dBm
-20
2.390000000 GHz
D1 -28.35 dBm
-30
-40
3DB
-50
-60
Stop
2.406 GHz
-70
-80
-90
Start
2.31 GHz
9.6 MHz/
Band-edge for RF Conducted Emissions_DH5_2480_Hopping On
* RBW
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
100 kHz
300 kHz
SWT 10 ms
Marker 4 [T1 ]
-57.20 dBm
2.485048000 GHz
Marker 1 [T1 ]
0.9 dB
-4.38 dBm
2.476840000 GHz A
SGL
Marker 2 [T1 ]
1 PK
MAXH
-67.79 dBm
2.483500000 GHz
-10
LVL
Marker 3 [T1 ]
-59.26 dBm
-20
2.500000000 GHz
D1 -24.38 dBm
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.476 GHz
2.4 MHz/
Stop
2.5 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
85 of 101
Band-edge for RF Conducted Emissions_2DH5_2402_Hopping On
* RBW
100 kHz
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
300 kHz
SWT 10 ms
Marker 4 [T1 ]
-63.63 dBm
2.371248000 GHz
Marker 1 [T1 ]
0.9 dB
-10.29 dBm
2.401968000 GHz A
SGL
Marker 2 [T1 ]
1 PK
MAXH
-63.04 1
dBm
2.400000000 GHz
-10
LVL
Marker 3 [T1 ]
-67.80 dBm
-20
2.390000000 GHz
-30
D1 -30.29 dBm
-40
3DB
-50
-60
-70
-80
-90
Start
2.31 GHz
9.6 MHz/
Stop
2.406 GHz
Band-edge for RF Conducted Emissions_2DH5_2480_Hopping On
* RBW
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
300 kHz
SWT 10 ms
Marker 4 [T1 ]
-61.04 dBm
2.494984000 GHz
Marker 1 [T1 ]
0.9 dB
-7.00 dBm
2.478016000 GHz A
SGL
Marker 2 [T1 ]
1 PK
MAXH
100 kHz
-66.26 dBm
2.483500000 GHz
-10
LVL
Marker 3 [T1 ]
-65.47 dBm
-20
2.500000000 GHz
D1 -27 dBm
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.476 GHz
2.4 MHz/
Stop
2.5 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
86 of 101
Band-edge for RF Conducted Emissions_3DH5_2402_Hopping On
* RBW
100 kHz
* VBW
Ref
10
* Att
10 dBm
Offset
300 kHz
SWT 10 ms
10 dB
Marker 4 [T1 ]
-63.42 dBm
2.373054000 GHz
Marker 1 [T1 ]
0.9 dB
-11.46 dBm
2.403000000 GHz A
SGL
Marker 2 [T1 ]
1 PK
MAXH
-61.64 dBm
2.400000000 GHz
-10
LVL
Marker 3 [T1 ]
-67.92 dBm
-20
2.390000000 GHz
-30
D1 -31.46 dBm
-40
3DB
-50
-60
-70
-80
-90
Start
2.31 GHz
9.3 MHz/
Stop
2.403 GHz
Band-edge for RF Conducted Emissions_3DH5_2480_Hopping On
* RBW
* VBW
Ref
10
* Att
10 dBm
Offset
300 kHz
SWT 10 ms
10 dB
Marker 4 [T1 ]
-59.80 dBm
2.488024000 GHz
Marker 1 [T1 ]
0.9 dB
-7.52 dBm
2.476024000 GHz A
SGL
Marker 2 [T1 ]
1 PK
MAXH
100 kHz
-66.81 dBm
2.483500000 GHz
-10
LVL
Marker 3 [T1 ]
-66.20 dBm
-20
2.500000000 GHz
D1 -27.52 dBm
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.476 GHz
2.4 MHz/
Stop
2.5 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
87 of 101
7.RF Conducted Spurious Emissions
Test Mode
Test
Channel
StartFre StopFre
[MHz]
[MHz]
DH5
2402
30
DH5
2402
DH5
Max.
Level
[dBm]
RBW
[kHz]
VBW
[kHz]
Pref[dBm
Limit Verdic
[dBm]
10000
1000
3000
-5.6
-53.450 <-25.6 PASS
10000
25000
1000
3000
-5.6
-60.110 <-25.6 PASS
2441
30
10000
1000
3000
-3.56
-53.170
<23.56
PASS
DH5
2441
10000
25000
1000
3000
-3.56
-57.150
<23.56
PASS
DH5
2480
30
10000
1000
3000
-3.52
-52.090
<23.52
PASS
DH5
2480
10000
25000
1000
3000
-3.52
-59.700
<23.52
PASS
2DH5
2402
30
10000
1000
3000
-9.78
-55.600
<29.78
PASS
2DH5
2402
10000
25000
1000
3000
-9.78
-60.140
<29.78
PASS
2DH5
2441
30
10000
1000
3000
-6.47
-54.880
<26.47
PASS
2DH5
2441
10000
25000
1000
3000
-6.47
-60.200
<26.47
PASS
2DH5
2480
30
10000
1000
3000
-6.54
-54.300
<26.54
PASS
2DH5
2480
10000
25000
1000
3000
-6.54
-59.170
<26.54
PASS
3DH5
2402
30
10000
1000
3000
-8.91
-54.640
<28.91
PASS
3DH5
2402
10000
25000
1000
3000
-8.91
-59.770
<28.91
PASS
3DH5
2441
30
10000
1000
3000
-6.47
-33.200
<26.47
PASS
3DH5
2441
10000
25000
1000
3000
-6.47
-60.190
<26.47
PASS
3DH5
2480
30
10000
1000
3000
-6.48
-54.500
<26.48
PASS
3DH5
2480
10000
25000
1000
3000
-6.48
-59.510
<26.48
PASS
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
88 of 101
RF Conducted Spurious Emissions_DH5_2402
* RBW
100 kHz
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
300 kHz
SWT 10 ms
Marker 1 [T1 ]
-5.60 dBm
2.402100000 GHz
0.9 dB
SGL
1 PK
MAXH
-10
LVL
-20
D2 -25.6 dBm
-30
Pref
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
10 MHz/
* RBW
* VBW
Ref
* Att
15 dBm
Offset
15 dB
Stop
1 MHz
3 MHz
SWT 60 ms
2.5 GHz
Marker 2 [T1 ]
-53.45 dBm
2.502560000 GHz
Marker 1 [T1 ]
-5.05 dBm
0.9 dB
10
2.402860000 GHz
1 PK
MAXH
SGL
LVL
-10
-20
D2 -25.6 dBm
CSE_1
-30
-40
3DB
-50
-60
-70
-80
Start
30 MHz
997 MHz/
Stop
10 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
89 of 101
* RBW
1 MHz
* VBW
Ref
* Att
15 dBm
Offset
15 dB
3 MHz
SWT 90 ms
Marker 1 [T1 ]
-60.11 dBm
19.225000000 GHz
0.9 dB
10
SGL
1 PK
MAXH
LVL
-10
-20
D2 -25.6 dBm
-30
CSE_2
-40
3DB
-50
-60
-70
-80
Start
10 GHz
1.5 GHz/
Stop
25 GHz
RF Conducted Spurious Emissions_DH5_2441
* RBW
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
100 kHz
300 kHz
SWT 10 ms
Marker 1 [T1 ]
-3.56 dBm
2.441000000 GHz
0.9 dB
SGL
1 PK
MAXH
-10
LVL
-20
D2 -23.56 dBm
-30
Pref
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
10 MHz/
Stop
2.5 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
90 of 101
* RBW
1 MHz
* VBW
Ref
* Att
15 dBm
Offset
15 dB
3 MHz
SWT 60 ms
Marker 2 [T1 ]
-53.17 dBm
2.542440000 GHz
Marker 1 [T1 ]
-2.87 dBm
0.9 dB
10
2.437755000 GHz
1 PK
MAXH
SGL
LVL
-10
-20
D2 -23.56 dBm
-30
CSE_1
-40
3DB
-50
-60
-70
-80
Start
30 MHz
997 MHz/
* RBW
* VBW
Ref
* Att
15 dBm
Offset
15 dB
Stop
1 MHz
3 MHz
SWT 90 ms
10 GHz
Marker 1 [T1 ]
-57.15 dBm
12.205000000 GHz
0.9 dB
10
SGL
1 PK
MAXH
LVL
-10
-20
D2 -23.56 dBm
CSE_2
-30
-40
3DB
-50
-60
-70
-80
Start
10 GHz
1.5 GHz/
Stop
25 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
91 of 101
RF Conducted Spurious Emissions_DH5_2480
* RBW
100 kHz
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
300 kHz
SWT 10 ms
Marker 1 [T1 ]
-3.52 dBm
2.480200000 GHz
0.9 dB
SGL
1 PK
MAXH
-10
LVL
-20
D2 -23.52 dBm
-30
Pref
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
10 MHz/
* RBW
* VBW
Ref
* Att
15 dBm
Offset
15 dB
Stop
1 MHz
3 MHz
SWT 60 ms
2.5 GHz
Marker 2 [T1 ]
-52.09 dBm
2.582320000 GHz
Marker 1 [T1 ]
-2.83 dBm
0.9 dB
10
2.477635000 GHz
1 PK
MAXH
SGL
LVL
-10
-20
D2 -23.52 dBm
CSE_1
-30
-40
3DB
-50
-60
-70
-80
Start
30 MHz
997 MHz/
Stop
10 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
92 of 101
* RBW
1 MHz
* VBW
Ref
* Att
15 dBm
Offset
15 dB
3 MHz
SWT 90 ms
Marker 1 [T1 ]
-59.70 dBm
22.847500000 GHz
0.9 dB
10
SGL
1 PK
MAXH
LVL
-10
-20
D2 -23.52 dBm
-30
CSE_2
-40
3DB
-50
-60
-70
-80
Start
10 GHz
1.5 GHz/
Stop
25 GHz
RF Conducted Spurious Emissions_2DH5_2402
* RBW
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
100 kHz
300 kHz
SWT 10 ms
Marker 1 [T1 ]
-9.78 dBm
2.401900000 GHz
0.9 dB
SGL
1 PK
MAXH
-10
LVL
-20
-30
D2 -29.78 dBm
Pref
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
10 MHz/
Stop
2.5 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
93 of 101
* RBW
1 MHz
* VBW
Ref
* Att
15 dBm
Offset
15 dB
3 MHz
SWT 60 ms
Marker 2 [T1 ]
-55.60 dBm
2.507545000 GHz
Marker 1 [T1 ]
-7.69 dBm
0.9 dB
10
2.402860000 GHz
1 PK
MAXH
SGL
LVL
-10
-20
D2 -29.78 dBm
-30
CSE_1
-40
3DB
-50
-60
-70
-80
Start
30 MHz
997 MHz/
* RBW
* VBW
Ref
* Att
15 dBm
Offset
15 dB
Stop
1 MHz
3 MHz
SWT 90 ms
10 GHz
Marker 1 [T1 ]
-60.14 dBm
22.225000000 GHz
0.9 dB
10
SGL
1 PK
MAXH
LVL
-10
-20
CSE_2
-30
D2 -29.78 dBm
-40
3DB
-50
-60
-70
-80
Start
10 GHz
1.5 GHz/
Stop
25 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
94 of 101
RF Conducted Spurious Emissions_2DH5_2441
* RBW
100 kHz
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
300 kHz
SWT 10 ms
Marker 1 [T1 ]
-6.47 dBm
2.441000000 GHz
0.9 dB
SGL
1 PK
MAXH
-10
LVL
-20
D2 -26.47 dBm
-30
Pref
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
10 MHz/
* RBW
* VBW
Ref
* Att
15 dBm
Offset
15 dB
Stop
1 MHz
3 MHz
SWT 60 ms
2.5 GHz
Marker 2 [T1 ]
-54.88 dBm
2.542440000 GHz
Marker 1 [T1 ]
-5.24 dBm
0.9 dB
10
2.437755000 GHz
1 PK
MAXH
SGL
LVL
-10
-20
D2 -26.47 dBm
CSE_1
-30
-40
3DB
-50
-60
-70
-80
Start
30 MHz
997 MHz/
Stop
10 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
95 of 101
* RBW
1 MHz
* VBW
Ref
* Att
15 dBm
Offset
15 dB
3 MHz
SWT 90 ms
Marker 1 [T1 ]
-60.20 dBm
24.437500000 GHz
0.9 dB
10
SGL
1 PK
MAXH
LVL
-10
-20
D2 -26.47 dBm
-30
CSE_2
-40
3DB
-50
-60
-70
-80
Start
10 GHz
1.5 GHz/
Stop
25 GHz
RF Conducted Spurious Emissions_2DH5_2480
* RBW
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
100 kHz
300 kHz
SWT 10 ms
Marker 1 [T1 ]
-6.54 dBm
2.480100000 GHz
0.9 dB
SGL
1 PK
MAXH
-10
LVL
-20
D2 -26.54 dBm
-30
Pref
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
10 MHz/
Stop
2.5 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
96 of 101
* RBW
1 MHz
* VBW
Ref
* Att
15 dBm
Offset
15 dB
3 MHz
SWT 60 ms
Marker 2 [T1 ]
-54.30 dBm
2.582320000 GHz
Marker 1 [T1 ]
-5.28 dBm
0.9 dB
10
2.477635000 GHz
1 PK
MAXH
SGL
LVL
-10
-20
D2 -26.54 dBm
-30
CSE_1
-40
3DB
-50
-60
-70
-80
Start
30 MHz
997 MHz/
* RBW
* VBW
Ref
* Att
15 dBm
Offset
15 dB
Stop
1 MHz
3 MHz
SWT 90 ms
10 GHz
Marker 1 [T1 ]
-59.17 dBm
22.615000000 GHz
0.9 dB
10
SGL
1 PK
MAXH
LVL
-10
-20
D2 -26.54 dBm
CSE_2
-30
-40
3DB
-50
-60
-70
-80
Start
10 GHz
1.5 GHz/
Stop
25 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
97 of 101
RF Conducted Spurious Emissions_3DH5_2402
* RBW
100 kHz
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
300 kHz
SWT 10 ms
Marker 1 [T1 ]
-8.91 dBm
2.402100000 GHz
0.9 dB
SGL
1 PK
MAXH
-10
LVL
-20
D2 -28.91 dBm
-30
Pref
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
10 MHz/
* RBW
* VBW
Ref
* Att
15 dBm
Offset
15 dB
Stop
1 MHz
3 MHz
SWT 60 ms
2.5 GHz
Marker 2 [T1 ]
-54.64 dBm
2.507545000 GHz
Marker 1 [T1 ]
-7.67 dBm
0.9 dB
10
2.402860000 GHz
1 PK
MAXH
SGL
LVL
-10
-20
CSE_1
-30
D2 -28.91 dBm
-40
3DB
-50
-60
-70
-80
Start
30 MHz
997 MHz/
Stop
10 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
98 of 101
* RBW
1 MHz
* VBW
Ref
* Att
15 dBm
Offset
15 dB
3 MHz
SWT 90 ms
Marker 1 [T1 ]
-59.77 dBm
22.150000000 GHz
0.9 dB
10
SGL
1 PK
MAXH
LVL
-10
-20
D2 -28.91 dBm
-30
CSE_2
-40
3DB
-50
-60
-70
-80
Start
10 GHz
1.5 GHz/
Stop
25 GHz
RF Conducted Spurious Emissions_3DH5_2441
* RBW
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
100 kHz
300 kHz
SWT 10 ms
Marker 1 [T1 ]
-6.47 dBm
2.441000000 GHz
0.9 dB
SGL
1 PK
MAXH
-10
LVL
-20
D2 -26.47 dBm
-30
Pref
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
10 MHz/
Stop
2.5 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
99 of 101
* RBW
1 MHz
* VBW
Ref
* Att
15 dBm
Offset
15 dB
3 MHz
SWT 60 ms
Marker 2 [T1 ]
-33.20 dBm
1.884420000 GHz
Marker 1 [T1 ]
-5.12 dBm
0.9 dB
10
2.437755000 GHz
1 PK
MAXH
SGL
LVL
-10
-20
D2 -26.47 dBm
-30
CSE_1
-40
3DB
-50
-60
-70
-80
Start
30 MHz
997 MHz/
* RBW
* VBW
Ref
* Att
15 dBm
Offset
15 dB
Stop
1 MHz
3 MHz
SWT 90 ms
10 GHz
Marker 1 [T1 ]
-60.19 dBm
24.160000000 GHz
0.9 dB
10
SGL
1 PK
MAXH
LVL
-10
-20
D2 -26.47 dBm
CSE_2
-30
-40
3DB
-50
-60
-70
-80
Start
10 GHz
1.5 GHz/
Stop
25 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
100 of 101
RF Conducted Spurious Emissions_3DH5_2480
* RBW
100 kHz
* VBW
Ref
10
* Att
10 dBm
Offset
10 dB
300 kHz
SWT 10 ms
Marker 1 [T1 ]
-6.48 dBm
2.479900000 GHz
0.9 dB
SGL
1 PK
MAXH
-10
LVL
-20
D2 -26.48 dBm
-30
Pref
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
10 MHz/
* RBW
* VBW
Ref
* Att
15 dBm
Offset
15 dB
Stop
1 MHz
3 MHz
SWT 60 ms
2.5 GHz
Marker 2 [T1 ]
-54.50 dBm
2.582320000 GHz
Marker 1 [T1 ]
-5.16 dBm
0.9 dB
10
2.477635000 GHz
1 PK
MAXH
SGL
LVL
-10
-20
D2 -26.48 dBm
CSE_1
-30
-40
3DB
-50
-60
-70
-80
Start
30 MHz
997 MHz/
Stop
10 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170200117301
Page:
101 of 101
* RBW
1 MHz
* VBW
Ref
* Att
15 dBm
Offset
15 dB
3 MHz
SWT 90 ms
Marker 1 [T1 ]
-59.51 dBm
19.840000000 GHz
0.9 dB
10
SGL
1 PK
MAXH
LVL
-10
-20
D2 -26.48 dBm
CSE_2
-30
-40
3DB
-50
-60
-70
-80
Start
10 GHz
1.5 GHz/
Stop
25 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
Download: BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Mirror Download [FCC.gov]BT565S-1 Bluetooth Headset Test Report SZEM170200117301  RPT Dongguan Koppo Electronics Co.,Ltd
Document ID3550709
Application IDPEnzGQK8PXlFdYN43hwejg==
Document DescriptionTest Report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize395.23kB (4940314 bits)
Date Submitted2017-09-08 00:00:00
Date Available2017-09-08 00:00:00
Creation Date2017-08-31 09:07:58
Producing SoftwareGPL Ghostscript 8.64
Document Lastmod2017-08-31 01:08:05
Document TitleSZEM170200117301 RPT
Document CreatorPScript5.dll Version 5.2.2
Document Author: yuxiu_yang

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
Page Count                      : 101
Create Date                     : 2017:08:31 09:07:58+08:00
Title                           : Microsoft Word - SZEM170200117301  RPT.doc
Producer                        : GPL Ghostscript 8.64
Author                          : yuxiu_yang
Creator                         : PScript5.dll Version 5.2.2
Modify Date                     : 2017:08:31 01:08:05Z