1. FCC ID
  2. 2AG6F
  3. 2AG6FH10

FCC ID 2AG6FH10

POS System

by CITAQ CO., LTD.

Grantee Code: 2AG6F   Product Code: H10
Latest application date: 2017-09-28

FCC ID Device Details

FCC ID2AG6FH10
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AG6F
Product CodeH10
Applicant BusinessCITAQ CO., LTD. 🇨🇳
Related Domains citaq.com
Equipment ClassPOS System
Test FirmDongguan Precise Testing Service Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.2-848.8 MHzChange in identification of presently authorized equipment. Original FCC ID: 2AG6FH7 Grant Date: 08/03/20162017-09-28
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: 2AG6FH7 Grant Date: 08/03/20162017-09-27
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: 2AG6FH7 Grant Date: 08/03/20162017-09-27

Exhibits

DocumentTypeAvailableFile
External PhotosExternal Photos2017-09-28PDF 1.4 MB
Label & LocationID Label/Location Info2017-09-28PDF 158.8 KB
Authorization LetterCover Letter(s)2017-09-28PDF 13.2 KB
Authorization for Change in IDCover Letter(s)2017-09-28PDF 15.6 KB
Request for Change IDCover Letter(s)2017-09-28PDF 11.8 KB
Authorization for Change in ID LetterCover Letter(s)2017-09-27PDF 15.6 KB
Request Change in ID LetterCover Letter(s)2017-09-27PDF 11.8 KB

Application Information

Application IDxi4xmLVM5QzhaHXgbw6gsQ==
Final Action Date2017-09-28
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: 2AG6FH7 Grant Date: 08/03/2016
Applicant FRN0025175381
ModelH10
Frequency Range824.2-848.8 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionPOS System
Responsible PartyJason Yang, Manager, yangruisheng@citaq.com , +86-754-88990419
AgentMark Mark Mark, Teleconformity, mark.koop@teleconformity.com , +31-84-8395876
Technical ContactMark Koop, Teleconformity, mark.koop@teleconformity.com , +31 84 8395867
Test FirmChris Du, Dongguan Precise Testing Service Co., Ltd., chris.du@pts-testing.com , 86-769-8928-2919
TCB Emailcertification@micomlabs.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThe output power listed is conducted output power. The maximum ERP measured is 1.045 W for part 22 and maximum ERIP measured is 0.624 W for part 24. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-users must be provided with operating instructions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
xi4xmLVM5QzhaHXgbw6gsQ==2017-09-28Change in identification of presently authorized equipment. Original FCC ID: 2AG6FH7 Grant Date: 08/03/2016
YlkxRTL/wjwDctVpMg3KDw==2017-09-27Change in identification of presently authorized equipment. Original FCC ID: 2AG6FH7 Grant Date: 08/03/2016
RNyhuySFJLMkkXrDmdEobg==2017-09-27Change in identification of presently authorized equipment. Original FCC ID: 2AG6FH7 Grant Date: 08/03/2016
NvLqS8D4Sy7wwZEvQH27Pw==2017-09-27Change in identification of presently authorized equipment. Original FCC ID: 2AG6FH7 Grant Date: 08/03/2016

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
15B20
824.2-848.8 MHz1.04415Hz248KGXW22HBC
824.2-848.8 MHz0.70619Hz244KG7W22HBC
826.4-846.6 MHz0.1158Hz4M20F9W22HBC
1850.2-1909.8 MHz0.49617Hz250KGXW24EBC
1850.2-1909.8 MHz0.62325Hz249KG7W24EBC
1852.4-1907.6 MHz0.1216Hz4M20F9W24EBC
2402-2480 MHz0.000770015C20
2402-2480 MHz0.0001415C2
2412-2462 MHz0.008715C2

Grants

TCB Grant - Application YlkxRTL/wjwDctVpMg3KDw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
 Date of Grant: 09/27/2017

Application Dated: 09/27/2017
CITAQ CO., LTD.
9th Floor, Chuangye Building, 6 Keji Middle Road,
New Hi-Tech Zone,
Shantou, Guangdong,
China
 
Attention: Jason Yang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG6FH10
Name of Grantee:  CITAQ CO., LTD.
Equipment Class: Digital Transmission System
Notes: POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
20 15C 2412.0  -  2462.0 0.0087  
20 15C 2402.0  -  2480.0 0.00014  

Output power listed is conducted. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-user must be provided with operating instructions for satisfying RF exposure compliance.

20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

EAS Grant - Application YlkxRTL/wjwDctVpMg3KDw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CITAQ CO., LTD.
9th Floor, Chuangye Building, 6 Keji Middle Road, New Hi-Tech Zone,
Shantou, Guangdong,
China 		  Date of Grant: 09/27/2017

Application Dated: 09/27/2017
 
Attention: Jason Yang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG6FH10
Name of Grantee:  CITAQ CO., LTD.
Equipment Class: Digital Transmission System
Notes: POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
20 15C 2412.0  -  2462.0 0.0087  
20 15C 2402.0  -  2480.0 0.00014  

Output power listed is conducted. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-user must be provided with operating instructions for satisfying RF exposure compliance.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

TCB Grant - Application xi4xmLVM5QzhaHXgbw6gsQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
 Date of Grant: 09/28/2017

Application Dated: 09/27/2017
CITAQ CO., LTD.
9th Floor, Chuangye Building, 6 Keji Middle Road,
New Hi-Tech Zone,
Shantou, Guangdong,
China
 
Attention: Jason Yang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG6FH10
Name of Grantee:  CITAQ CO., LTD.
Equipment Class: PCS Licensed Transmitter
Notes: POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 824.2  -  848.8 1.044 15.0  Hz 248KGXW
BC 22H 824.2  -  848.8 0.706 19.0  Hz 244KG7W
BC 22H 826.4  -  846.6 0.115 8.0  Hz 4M20F9W
BC 24E 1850.2  -  1909.8 0.496 17.0  Hz 250KGXW
BC 24E 1850.2  -  1909.8 0.623 25.0  Hz 249KG7W
BC 24E 1852.4  -  1907.6 0.121 6.0  Hz 4M20F9W

The output power listed is conducted output power. The maximum ERP measured is 1.045 W for part 22 and maximum ERIP measured is 0.624 W for part 24. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-users must be provided with operating instructions for satisfying RF exposure compliance.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application xi4xmLVM5QzhaHXgbw6gsQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CITAQ CO., LTD.
9th Floor, Chuangye Building, 6 Keji Middle Road, New Hi-Tech Zone,
Shantou, Guangdong,
China 		  Date of Grant: 09/28/2017

Application Dated: 09/27/2017
 
Attention: Jason Yang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG6FH10
Name of Grantee:  CITAQ CO., LTD.
Equipment Class: PCS Licensed Transmitter
Notes: POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 824.2  -  848.8 1.044 15.0  Hz 248KGXW
BC 22H 824.2  -  848.8 0.706 19.0  Hz 244KG7W
BC 22H 826.4  -  846.6 0.115 8.0  Hz 4M20F9W
BC 24E 1850.2  -  1909.8 0.496 17.0  Hz 250KGXW
BC 24E 1850.2  -  1909.8 0.623 25.0  Hz 249KG7W
BC 24E 1852.4  -  1907.6 0.121 6.0  Hz 4M20F9W

The output power listed is conducted output power. The maximum ERP measured is 1.045 W for part 22 and maximum ERIP measured is 0.624 W for part 24. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-users must be provided with operating instructions for satisfying RF exposure compliance.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application RNyhuySFJLMkkXrDmdEobg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
 Date of Grant: 09/27/2017

Application Dated: 09/27/2017
CITAQ CO., LTD.
9th Floor, Chuangye Building, 6 Keji Middle Road,
New Hi-Tech Zone,
Shantou, Guangdong,
China
 
Attention: Jason Yang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG6FH10
Name of Grantee:  CITAQ CO., LTD.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
20 15B  - 


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

EAS Grant - Application RNyhuySFJLMkkXrDmdEobg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CITAQ CO., LTD.
9th Floor, Chuangye Building, 6 Keji Middle Road, New Hi-Tech Zone,
Shantou, Guangdong,
China 		  Date of Grant: 09/27/2017

Application Dated: 09/27/2017
 
Attention: Jason Yang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG6FH10
Name of Grantee:  CITAQ CO., LTD.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
20 15B  - 


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

TCB Grant - Application NvLqS8D4Sy7wwZEvQH27Pw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
 Date of Grant: 09/27/2017

Application Dated: 09/27/2017
CITAQ CO., LTD.
9th Floor, Chuangye Building, 6 Keji Middle Road,
New Hi-Tech Zone,
Shantou, Guangdong,
China
 
Attention: Jason Yang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG6FH10
Name of Grantee:  CITAQ CO., LTD.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
20 15C 2402.0  -  2480.0 0.00077  

Output power listed is conducted. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-user must be provided with operating instructions for satisfying RF exposure compliance.

20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

EAS Grant - Application NvLqS8D4Sy7wwZEvQH27Pw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CITAQ CO., LTD.
9th Floor, Chuangye Building, 6 Keji Middle Road, New Hi-Tech Zone,
Shantou, Guangdong,
China 		  Date of Grant: 09/27/2017

Application Dated: 09/27/2017
 
Attention: Jason Yang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG6FH10
Name of Grantee:  CITAQ CO., LTD.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
20 15C 2402.0  -  2480.0 0.00077  

Output power listed is conducted. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-user must be provided with operating instructions for satisfying RF exposure compliance.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

Mail To: