FCC ID 2AG6FV10

POS System

by CITAQ CO., LTD.

Grantee Code: 2AG6F   Product Code: V10
Latest application date: 2016-02-25

Device Images

FCC ID Device Details

FCC ID2AG6FV10
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AG6F
Product CodeV10
Applicant BusinessCITAQ CO., LTD. 🇨🇳
Related Domains citaq.com
Equipment ClassPOS System
Test FirmDongguan Precise Testing Service Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.2-848.8 MHzOriginal Equipment2016-02-25
2402-2480 MHzOriginal Equipment2016-02-25

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2016-02-25PDF 857.6 KB
Internal PhotosInternal Photos2016-02-25PDF 1.2 MB
Internal Photos Metadata onlyExternal Photos2016-02-25PDF 1.2 MB
External PhotosExternal Photos2016-02-25PDF 431.2 KB
Label Location/InfoID Label/Location Info2016-02-25PDF 54.9 KB
Test Setup PhotosTest Setup Photos2016-02-25PDF 1 MB
Test ReportTest Report2016-02-25PDF 880.6 KB
Test Report DTSTest Report2016-02-25PDF 2.9 MB
Test Report FHSSTest Report2016-02-25PDF 2.4 MB
Test Report Part 22 & 24Test Report2016-02-25PDF 4.8 MB
AuthorizationCover Letter(s)2016-02-25PDF 102.1 KB
Authorization LetterCover Letter(s)2016-02-25PDF 102.1 KB
Confidentiality RequestCover Letter(s)2016-02-25PDF 115.1 KB
RF EsposureRF Exposure Info2016-02-25PDF 99.6 KB
RF ExposureRF Exposure Info2016-02-25PDF 99.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 243 KB
Schematics-1 Metadata onlySchematicsPDF 2.4 MB
Schematics-2 Metadata onlySchematicsPDF 5.5 MB
Schematics-3 Metadata onlySchematicsPDF 4.2 MB
schematics-2 Metadata onlySchematicsPDF 5.5 MB
schematics-3 Metadata onlySchematicsPDF 4.2 MB
Operational Description Metadata onlyOperational DescriptionPDF 928.7 KB
Parts/BOM Metadata onlyParts List/Tune Up InfoPDF 54.5 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 83.7 KB

Application Information

Application IDvD6JVkTkgCyp9OafvHvyDA==
Final Action Date2016-02-25
Application PurposeOriginal Equipment
Applicant FRN0025175381
ModelV10
Frequency Range824.2-848.8 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionPOS System
Responsible PartyJason Yang, Manager, yangruisheng@citaq.com , +86-754-88990419
Technical ContactMark Koop, Teleconformity, mark.koop@teleconformity.com , (31)848395867
Test FirmChris Du, Dongguan Precise Testing Service Co., Ltd., chris.du@pts-testing.com , 86-769-8928-2919
TCB Emailcertification@micomlabs.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThe output power listed is conducted output power. The maximum ERP measured is 0.867 W for part 22 and maximum ERIP measured is 0.419 W. The antenna used with this transmitter must provide a minimum separation distance of at least 20 cm from all persons. End-users must be provided with operating instructions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
vD6JVkTkgCyp9OafvHvyDA==2016-02-25Original Equipment
dwT30hUFI3PsZxGWGZhYhw==2016-02-25Original Equipment
WeVBqjWbnQFsYf06O21exQ==2016-02-25Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
15B20
824.2-848.8 MHz1.71711Hz248KGXW22HBC
824.2-848.8 MHz0.16414Hz244KG7W22HBC
826.4-846.6 MHz0.1858Hz4M17F9W22HBC
1850.2-1909.8 MHz0.82820Hz246KGXW24EBC
1850.2-1909.8 MHz0.80726Hz247KG7W24EBC
1852.4-1907.6 MHz0.1776Hz4M15F9W24EBC
2402-2480 MHz0.001615C2
2412-2462 MHz0.008715C2

Grants

TCB Grant - Application WeVBqjWbnQFsYf06O21exQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 02/25/2016

Application Dated: 02/25/2016
CITAQ CO., LTD.
9th Floor, Chuangye Building, 6 Keji Middle Road,
New Hi-Tech Zone,
Shantou, Guangdong,
China
 
Attention: Jason Yang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG6FV10
Name of Grantee:  CITAQ CO., LTD.
Equipment Class: Digital Transmission System
Notes: POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 15C 2412.0  -  2462.0 0.0087  
20 15C 2402.0  -  2480.0 0.0016  

Output power listed is conducted. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-user must be provided with operating instructions for satisfying RF exposure compliance.

20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

EAS Grant - Application WeVBqjWbnQFsYf06O21exQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

CITAQ CO., LTD.
9th Floor, Chuangye Building, 6 Keji Middle Road, New Hi-Tech Zone,
Shantou, Guangdong,
China
  Date of Grant: 02/25/2016

Application Dated: 02/25/2016
 
Attention: Jason Yang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG6FV10
Name of Grantee:  CITAQ CO., LTD.
Equipment Class: Digital Transmission System
Notes: POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 15C 2412.0  -  2462.0 0.0087  
20 15C 2402.0  -  2480.0 0.0016  

Output power listed is conducted. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-user must be provided with operating instructions for satisfying RF exposure compliance.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

TCB Grant - Application vD6JVkTkgCyp9OafvHvyDA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 02/25/2016

Application Dated: 02/25/2016
CITAQ CO., LTD.
9th Floor, Chuangye Building, 6 Keji Middle Road,
New Hi-Tech Zone,
Shantou, Guangdong,
China
 
Attention: Jason Yang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG6FV10
Name of Grantee:  CITAQ CO., LTD.
Equipment Class: PCS Licensed Transmitter
Notes: POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 1.717 11.0  Hz 248KGXW
BC 22H 824.2  -  848.8 0.164 14.0  Hz 244KG7W
BC 22H 826.4  -  846.6 0.185 8.0  Hz 4M17F9W
BC 24E 1850.2  -  1909.8 0.828 20.0  Hz 246KGXW
BC 24E 1850.2  -  1909.8 0.807 26.0  Hz 247KG7W
BC 24E 1852.4  -  1907.6 0.177 6.0  Hz 4M15F9W

The output power listed is conducted output power. The maximum ERP measured is 0.867 W for part 22 and maximum ERIP measured is 0.419 W. The antenna used with this transmitter must provide a minimum separation distance of at least 20 cm from all persons. End-users must be provided with operating instructions for satisfying RF exposure compliance.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application vD6JVkTkgCyp9OafvHvyDA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

CITAQ CO., LTD.
9th Floor, Chuangye Building, 6 Keji Middle Road, New Hi-Tech Zone,
Shantou, Guangdong,
China
  Date of Grant: 02/25/2016

Application Dated: 02/25/2016
 
Attention: Jason Yang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG6FV10
Name of Grantee:  CITAQ CO., LTD.
Equipment Class: PCS Licensed Transmitter
Notes: POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 1.717 11.0  Hz 248KGXW
BC 22H 824.2  -  848.8 0.164 14.0  Hz 244KG7W
BC 22H 826.4  -  846.6 0.185 8.0  Hz 4M17F9W
BC 24E 1850.2  -  1909.8 0.828 20.0  Hz 246KGXW
BC 24E 1850.2  -  1909.8 0.807 26.0  Hz 247KG7W
BC 24E 1852.4  -  1907.6 0.177 6.0  Hz 4M15F9W

The output power listed is conducted output power. The maximum ERP measured is 0.867 W for part 22 and maximum ERIP measured is 0.419 W. The antenna used with this transmitter must provide a minimum separation distance of at least 20 cm from all persons. End-users must be provided with operating instructions for satisfying RF exposure compliance.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application dwT30hUFI3PsZxGWGZhYhw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 02/25/2016

Application Dated: 02/25/2016
CITAQ CO., LTD.
9th Floor, Chuangye Building, 6 Keji Middle Road,
New Hi-Tech Zone,
Shantou, Guangdong,
China
 
Attention: Jason Yang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG6FV10
Name of Grantee:  CITAQ CO., LTD.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 15B  - 


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

EAS Grant - Application dwT30hUFI3PsZxGWGZhYhw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

CITAQ CO., LTD.
9th Floor, Chuangye Building, 6 Keji Middle Road, New Hi-Tech Zone,
Shantou, Guangdong,
China
  Date of Grant: 02/25/2016

Application Dated: 02/25/2016
 
Attention: Jason Yang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG6FV10
Name of Grantee:  CITAQ CO., LTD.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 15B  - 


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

Mail To: