FCC ID 2AG6R-AN510APIWAC

Araknis Networks 510-series Indoor Wall Mount Wireless Access Point

by Araknis Networks

Grantee Code: 2AG6R   Product Code: AN510APIWAC
Latest application date: 2019-09-23

FCC ID Device Details

FCC ID2AG6R-AN510APIWAC
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AG6R
Product CodeAN510APIWAC
Applicant BusinessAraknis Networks 🇺🇸
Related Domains snapav.com
Equipment ClassAraknis Networks 510-series Indoor Wall Mount Wireless Access Point
Test FirmBureau Veritas CPS(H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2019-09-23
5180-5240 MHzOriginal Equipment2019-09-23

Exhibits

DocumentTypeAvailableFile
Users manualUsers Manual2019-09-23PDF 2.3 MB
Internal photosInternal Photos2019-09-23PDF 1,023.3 KB
External photosExternal Photos2019-09-23PDF 308.6 KB
Label LocationID Label/Location Info2019-09-23PDF 86.7 KB
Label SampleID Label/Location Info2019-09-23PDF 871.8 KB
Test setup photosTest Setup Photos2019-09-23PDF 613.6 KB
Test Report (DTS)_revTest Report2019-09-23PDF 1.8 MB
Test Report (NII) revTest Report2019-09-23PDF 761.1 KB
Attestation (Channel and Mode Declaration)Attestation Statements2019-09-23PDF 214.3 KB
Agent authorizationCover Letter(s)2019-09-23PDF 288.7 KB
Confidentiality requestCover Letter(s)2019-09-23PDF 299.3 KB
RF Exposure Info (MPE)_revRF Exposure Info2019-09-23PDF 57.1 KB
Block diagram Metadata onlyBlock DiagramPDF 274.9 KB
Schematics Metadata onlySchematicsPDF 1.2 MB
Operational Description Metadata onlyOperational DescriptionPDF 83.2 KB
Software Operational Description_rev Metadata onlyOperational DescriptionPDF 201.8 KB

Application Information

Application IDq8XnL3zrlpdw68GofgYShA==
Final Action Date2019-09-23
Application PurposeOriginal Equipment
Applicant FRN0025178922
ModelAN510APIWAC
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionAraknis Networks 510-series Indoor Wall Mount Wireless Access Point
Responsible PartyRobert Riggsby, Vice President of Development and Quality, robert.riggsby@snapav.com , 704-945-7974
AgentAndrea Andrea Andrea, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, andrea.hsia@tw.bureauveritas.com , 886-3-3183232
Test FirmEric Lin, Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch, eric-wp.lin@tw.bureauveritas.com , +886-3-2641570
TCB Emailcertification@nacsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is maximum combined conducted output power. This device supports 20 and 40 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
q8XnL3zrlpdw68GofgYShA==2019-09-23Original Equipment
YSwkUPeC5HjafXiXzTIQYQ==2019-09-23Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.275000015CCC, MO
5180-5240 MHz0.19615ECC, MO
5745-5825 MHz0.32215ECC, MO

Grants

TCB Grant - Application YSwkUPeC5HjafXiXzTIQYQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  North American EMC Certification Services Inc
24889 Ferguson Ave
Maple Ridge, BC,
Canada
Date of Grant: 09/23/2019

Application Dated: 09/23/2019
Araknis Networks
1800 Continental Blvd.
Suite 300
Charlotte, NC 28273
 
Attention: Robert Riggsby , Vice President of Development and Quality

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG6R-AN510APIWAC
Name of Grantee:  Araknis Networks
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Araknis Networks 510-series Indoor Wall Mount Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.196  
CC MO 15E 5745.0  -  5825.0 0.322  

Power listed is maximum combined conducted output power. This device supports 20, 40, and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device is restricted to indoor use only.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application YSwkUPeC5HjafXiXzTIQYQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Araknis Networks
1800 Continental Blvd. Suite 300
Charlotte, NC 28273
United States
  Date of Grant: 09/23/2019

Application Dated: 09/23/2019
 
Attention: Robert Riggsby , Vice President of Development and Quality

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG6R-AN510APIWAC
Name of Grantee:  Araknis Networks
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Araknis Networks 510-series Indoor Wall Mount Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.196  
CC MO 15E 5745.0  -  5825.0 0.322  

Power listed is maximum combined conducted output power. This device supports 20, 40, and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device is restricted to indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application q8XnL3zrlpdw68GofgYShA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  North American EMC Certification Services Inc
24889 Ferguson Ave
Maple Ridge, BC,
Canada
Date of Grant: 09/23/2019

Application Dated: 09/23/2019
Araknis Networks
1800 Continental Blvd.
Suite 300
Charlotte, NC 28273
 
Attention: Robert Riggsby , Vice President of Development and Quality

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG6R-AN510APIWAC
Name of Grantee:  Araknis Networks
Equipment Class: Digital Transmission System
Notes: Araknis Networks 510-series Indoor Wall Mount Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.275  

Power listed is maximum combined conducted output power. This device supports 20 and 40 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application q8XnL3zrlpdw68GofgYShA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Araknis Networks
1800 Continental Blvd. Suite 300
Charlotte, NC 28273
United States
  Date of Grant: 09/23/2019

Application Dated: 09/23/2019
 
Attention: Robert Riggsby , Vice President of Development and Quality

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG6R-AN510APIWAC
Name of Grantee:  Araknis Networks
Equipment Class: Digital Transmission System
Notes: Araknis Networks 510-series Indoor Wall Mount Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.275  

Power listed is maximum combined conducted output power. This device supports 20 and 40 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: