FCC ID 2AG78B2

FCC ID 2AG78B2 External-Photos, 2AG78 B2, 2AG78B2

Golden Unions Limited 3G Smart Phone B2

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: 2AG78B2 is 2AG78. The remaining characters of the FCC ID, B2, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: 3G Smart Phone

FCC ID 2AG78B2 External-Photos
FCC ID 2AG78B2 External-Photos
FCC ID 2AG78B2 External-Photos
FCC ID 2AG78B2 External-Photos
FCC ID 2AG78B2 External-Photos
FCC ID 2AG78B2 External-Photos
FCC ID 2AG78B2 External-Photos
FCC ID 2AG78B2 External-Photos
FCC ID 2AG78B2 External-Photos
FCC ID 2AG78B2 External-Photos
FCC ID 2AG78B2 External-Photos
FCC ID 2AG78B2 External-Photos
FCC ID 2AG78B2 External-Photos
FCC ID 2AG78B2 External-Photos
FCC ID 2AG78B2 External-Photos
FCC ID 2AG78B2 External-Photos
FCC ID 2AG78B2 External-Photos

*Please Check Individual Documents for more images

App # Purpose Date Unique ID
1 Original Equipment 2016-07-06 XSgdynTOLZRJaZdjAyXElg==
2 Original Equipment 2016-07-06 IrQgKtsEaV+4880OkthtLQ==
3 Original Equipment 2016-07-06 hrNP2R7n7P3jWmUpAosZOg==

Operating Frequencies

Frequency RangePower OutputToleranceEmission DesignatorRule Parts App #
824.2-848.8 MHz1.164 Watts2.5ppm245KGXW22H 1.2
826.4-846.6 MHz57 mW2.5ppm4M15F9W22H 1.3
826.4-846.6 MHz57 mW2.5ppm4M24F9W22H 1.4
826.4-846.6 MHz53 mW2.5ppm4M15F9W22H 1.5
1.8502-1.9098 GHz1.019 Watts2.5ppm250KGXW24E 1.6
1.8502-1.9098 GHz925 mW2.5ppm245KGXW24E 1.7
1.8524-1.9076 GHz151 mW2.5ppm4M22F9W24E 1.1
1.8524-1.9076 GHz154 mW2.5ppm4M19F9W24E 1.8
1.8524-1.9076 GHz158 mW2.5ppm4M16F9W24E 1.9
2.402-2.48 GHz Bluetooth3 mW15C 3.1
2.402-2.48 GHz Bluetooth0.4 mW15C 2.2
2.412-2.462 GHz 2.4 GHz WiFi9 mW15C 2.1

Exhibits

Available Exhibits

App #Document Type Submitted
Available
1 AGENCY AUTHORIZATION LETTERCover Letter(s)
Adobe Acrobat PDF (13 kB)
2016-07-05
2016-07-06
1 Justification LetterID Label/Location Info
Adobe Acrobat PDF (25 kB)
2016-07-05
2016-07-06
1 Declaration of SimilarityCover Letter(s)
Adobe Acrobat PDF (26 kB)
2016-07-05
2016-07-06
1 USER MANUALUsers Manual
Adobe Acrobat PDF (4409 kB)
2016-07-05
2016-07-06
1 TEST SETUP PHOTO PCETest Setup Photos
Adobe Acrobat PDF (142 kB)
2016-07-05
2016-07-06
1 TEST REPORT 2GTest Report
Adobe Acrobat PDF (2630 kB)
2016-07-05
2016-07-06
1 RF EXPOSURE P2RF Exposure Info
Adobe Acrobat PDF (4464 kB)
2016-07-05
2016-07-06
1 RF EXPOSURE P1RF Exposure Info
Adobe Acrobat PDF (5564 kB)
2016-07-05
2016-07-06
1 RF EXPOSURERF Exposure Info
Adobe Acrobat PDF (126 kB)
2016-07-05
2016-07-06
1 INTERNAL PHOTOSInternal Photos
Adobe Acrobat PDF (669 kB)
2016-07-05
2016-07-06
1 ID LABEL AND LOCATIONID Label/Location Info
Adobe Acrobat PDF (73 kB)
2016-07-05
2016-07-06
1 EXTERNAL PHOTOSExternal Photos
Adobe Acrobat PDF (324 kB)
2016-07-05
2016-07-06
1 LETTER OF CONFIDENTIALITYCover Letter(s)
Adobe Acrobat PDF (137 kB)
2016-07-05
2016-07-06
1 LETTER OF AGENCYAttestation Statements
Adobe Acrobat PDF (107 kB)
2016-07-05
2016-07-06
2 AGENCY AUTHORIZATION LETTERCover Letter(s)
Adobe Acrobat PDF (13 kB)
2016-07-05
2016-07-06
2 LABEL JUSTIFICATION LETTERCover Letter(s)
Adobe Acrobat PDF (25 kB)
2016-07-05
2016-07-06
2 Declaration of SimilarityCover Letter(s)
Adobe Acrobat PDF (26 kB)
2016-07-05
2016-07-06
2 USER MANUALUsers Manual
Adobe Acrobat PDF (4409 kB)
2016-07-05
2016-07-06
2 TEST SETUP PHOTO 15CTest Setup Photos
Adobe Acrobat PDF (165 kB)
2016-07-05
2016-07-06
2 TEST REPORT WIFITest Report
Adobe Acrobat PDF (2513 kB)
2016-07-05
2016-07-06
2 RF EXPOSURE P2RF Exposure Info
Adobe Acrobat PDF (4464 kB)
2016-07-05
2016-07-06
2 RF EXPOSURE P1RF Exposure Info
Adobe Acrobat PDF (5564 kB)
2016-07-05
2016-07-06
2 RF EXPOSURERF Exposure Info
Adobe Acrobat PDF (126 kB)
2016-07-05
2016-07-06
2 INTERNAL PHOTOSInternal Photos
Adobe Acrobat PDF (669 kB)
2016-07-05
2016-07-06
2 ID LABEL AND LOCATIONID Label/Location Info
Adobe Acrobat PDF (73 kB)
2016-07-05
2016-07-06
2 EXTERNAL PHOTOSExternal Photos
Adobe Acrobat PDF (324 kB)
2016-07-05
2016-07-06
2 LETTER OF CONFIDENTIALITYCover Letter(s)
Adobe Acrobat PDF (137 kB)
2016-07-05
2016-07-06
2 LETTER OF AGENCYAttestation Statements
Adobe Acrobat PDF (107 kB)
2016-07-05
2016-07-06
3 Letter of AuthorisationCover Letter(s)
Adobe Acrobat PDF (13 kB)
2016-07-05
2016-07-06
3 Declaration of label locationCover Letter(s)
Adobe Acrobat PDF (25 kB)
2016-07-05
2016-07-06
3 Letter of Hopping SequenceCover Letter(s)
Adobe Acrobat PDF (133 kB)
2016-07-05
2016-07-06
3 Declaration of SimilarityCover Letter(s)
Adobe Acrobat PDF (26 kB)
2016-07-05
2016-07-06
3 USER MANUALUsers Manual
Adobe Acrobat PDF (4383 kB)
2016-07-05
2016-07-06
3 TEST SETUP PHOTO 15CTest Setup Photos
Adobe Acrobat PDF (165 kB)
2016-07-05
2016-07-06
3 TEST REPORT BTTest Report
Adobe Acrobat PDF (1822 kB)
2016-07-05
2016-07-06
3 RF EXPOSURE P2RF Exposure Info
Adobe Acrobat PDF (4464 kB)
2016-07-05
2016-07-06
3 RF EXPOSURE P1RF Exposure Info
Adobe Acrobat PDF (5564 kB)
2016-07-05
2016-07-06
3 RF EXPOSURERF Exposure Info
Adobe Acrobat PDF (126 kB)
2016-07-05
2016-07-06
3 INTERNAL PHOTOSInternal Photos
Adobe Acrobat PDF (669 kB)
2016-07-05
2016-07-06
3 ID LABEL AND LOCATIONID Label/Location Info
Adobe Acrobat PDF (73 kB)
2016-07-05
2016-07-06
3 EXTERNAL PHOTOSExternal Photos
Adobe Acrobat PDF (324 kB)
2016-07-05
2016-07-06
3 LETTER OF CONFIDENTIALITYCover Letter(s)
Adobe Acrobat PDF (137 kB)
2016-07-05
2016-07-06
3 LETTER OF AGENCYAttestation Statements
Adobe Acrobat PDF (107 kB)
2016-07-05
2016-07-06

APP # 1 (2016-07-06)

App # Document Type Submitted
Available
1 AGENCY AUTHORIZATION LETTER Cover Letter(s)
Adobe Acrobat PDF (13 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
1 Justification Letter ID Label/Location Info
Adobe Acrobat PDF (25 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
1 Declaration of Similarity Cover Letter(s)
Adobe Acrobat PDF (26 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
1 USER MANUAL Users Manual
Adobe Acrobat PDF (4409 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
1 TEST SETUP PHOTO PCE Test Setup Photos
Adobe Acrobat PDF (142 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
1 TEST REPORT 2G Test Report
Adobe Acrobat PDF (2630 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
1 RF EXPOSURE P2 RF Exposure Info
Adobe Acrobat PDF (4464 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
1 RF EXPOSURE P1 RF Exposure Info
Adobe Acrobat PDF (5564 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
1 RF EXPOSURE RF Exposure Info
Adobe Acrobat PDF (126 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
1 INTERNAL PHOTOS Internal Photos
Adobe Acrobat PDF (669 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
1 ID LABEL AND LOCATION ID Label/Location Info
Adobe Acrobat PDF (73 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
1 EXTERNAL PHOTOS External Photos
Adobe Acrobat PDF (324 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
1 LETTER OF CONFIDENTIALITY Cover Letter(s)
Adobe Acrobat PDF (137 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
1 LETTER OF AGENCY Attestation Statements
Adobe Acrobat PDF (107 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00

APP # 2 (2016-07-06)

App # Document Type Submitted
Available
2 AGENCY AUTHORIZATION LETTER Cover Letter(s)
Adobe Acrobat PDF (13 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
2 LABEL JUSTIFICATION LETTER Cover Letter(s)
Adobe Acrobat PDF (25 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
2 Declaration of Similarity Cover Letter(s)
Adobe Acrobat PDF (26 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
2 USER MANUAL Users Manual
Adobe Acrobat PDF (4409 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
2 TEST SETUP PHOTO 15C Test Setup Photos
Adobe Acrobat PDF (165 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
2 TEST REPORT WIFI Test Report
Adobe Acrobat PDF (2513 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
2 RF EXPOSURE P2 RF Exposure Info
Adobe Acrobat PDF (4464 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
2 RF EXPOSURE P1 RF Exposure Info
Adobe Acrobat PDF (5564 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
2 RF EXPOSURE RF Exposure Info
Adobe Acrobat PDF (126 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
2 INTERNAL PHOTOS Internal Photos
Adobe Acrobat PDF (669 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
2 ID LABEL AND LOCATION ID Label/Location Info
Adobe Acrobat PDF (73 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
2 EXTERNAL PHOTOS External Photos
Adobe Acrobat PDF (324 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
2 LETTER OF CONFIDENTIALITY Cover Letter(s)
Adobe Acrobat PDF (137 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
2 LETTER OF AGENCY Attestation Statements
Adobe Acrobat PDF (107 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00

APP # 3 (2016-07-06)

App # Document Type Submitted
Available
3 Letter of Authorisation Cover Letter(s)
Adobe Acrobat PDF (13 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
3 Declaration of label location Cover Letter(s)
Adobe Acrobat PDF (25 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
3 Letter of Hopping Sequence Cover Letter(s)
Adobe Acrobat PDF (133 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
3 Declaration of Similarity Cover Letter(s)
Adobe Acrobat PDF (26 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
3 USER MANUAL Users Manual
Adobe Acrobat PDF (4383 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
3 TEST SETUP PHOTO 15C Test Setup Photos
Adobe Acrobat PDF (165 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
3 TEST REPORT BT Test Report
Adobe Acrobat PDF (1822 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
3 RF EXPOSURE P2 RF Exposure Info
Adobe Acrobat PDF (4464 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
3 RF EXPOSURE P1 RF Exposure Info
Adobe Acrobat PDF (5564 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
3 RF EXPOSURE RF Exposure Info
Adobe Acrobat PDF (126 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
3 INTERNAL PHOTOS Internal Photos
Adobe Acrobat PDF (669 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
3 ID LABEL AND LOCATION ID Label/Location Info
Adobe Acrobat PDF (73 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
3 EXTERNAL PHOTOS External Photos
Adobe Acrobat PDF (324 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
3 LETTER OF CONFIDENTIALITY Cover Letter(s)
Adobe Acrobat PDF (137 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00
3 LETTER OF AGENCY Attestation Statements
Adobe Acrobat PDF (107 kB)
2016-07-05 00:00:00
2016-07-06 00:00:00

APP # 1 (2016-07-06)

App # Document Type Submitted
Available
1 BLOCK DIAGRAM Block Diagram
Adobe Acrobat PDF (50 kB)
2016-07-05 00:00:00
N/A
1 PART PLACEMENT Parts List/Tune Up Info
Adobe Acrobat PDF (483 kB)
2016-07-05 00:00:00
N/A

APP # 3 (2016-07-06)

App # Document Type Submitted
Available
3 SCHEMATICS Schematics
Adobe Acrobat PDF (353 kB)
2016-07-05 00:00:00
N/A
3 OPERATIONAL DESCRIPTION v2 Operational Description
Adobe Acrobat PDF (348 kB)
2016-07-05 00:00:00
N/A

APP # 1 (2016-07-06)

App # Document Type Submitted
Available
1 TUNE UP Parts List/Tune Up Info
Adobe Acrobat PDF (84 kB)
2016-07-05 00:00:00
N/A

APP # 2 (2016-07-06)

App # Document Type Submitted
Available
2 SCHEMATICS Schematics
Adobe Acrobat PDF (353 kB)
2016-07-05 00:00:00
N/A
2 OPERATIONAL DESCRIPTION Operational Description
Adobe Acrobat PDF (348 kB)
2016-07-05 00:00:00
N/A

APP # 1 (2016-07-06)

App # Document Type Submitted
Available
1 PCB LAYOUT Parts List/Tune Up Info
Adobe Acrobat PDF (2472 kB)
2016-07-05 00:00:00
N/A

APP # 3 (2016-07-06)

App # Document Type Submitted
Available
3 PARTS LIST(S) BOM Parts List/Tune Up Info
Adobe Acrobat PDF (99 kB)
2016-07-05 00:00:00
N/A

APP # 2 (2016-07-06)

App # Document Type Submitted
Available
2 PARTS LIST(S) BOM Parts List/Tune Up Info
Adobe Acrobat PDF (99 kB)
2016-07-05 00:00:00
N/A

APP # 3 (2016-07-06)

App # Document Type Submitted
Available
3 Block Diagram v2 Block Diagram
Adobe Acrobat PDF (50 kB)
2016-07-05 00:00:00
N/A

APP # 1 (2016-07-06)

App # Document Type Submitted
Available
1 SCHEMATICS Schematics
Adobe Acrobat PDF (353 kB)
2016-07-05 00:00:00
N/A
1 OPERATIONAL DESCRIPTION Operational Description
Adobe Acrobat PDF (348 kB)
2016-07-05 00:00:00
N/A

APP # 3 (2016-07-06)

App # Document Type Submitted
Available
3 OPERATIONAL DESCRIPTION Operational Description
Adobe Acrobat PDF (405 kB)
2016-07-05 00:00:00
N/A

APP # 1 (2016-07-06)

App # Document Type Submitted
Available
1 PARTS LIST(S) BOM Parts List/Tune Up Info
Adobe Acrobat PDF (99 kB)
2016-07-05 00:00:00
N/A

APP # 3 (2016-07-06)

App # Document Type Submitted
Available
3 PART PLACEMENT Parts List/Tune Up Info
Adobe Acrobat PDF (483 kB)
2016-07-05 00:00:00
N/A

APP # 2 (2016-07-06)

App # Document Type Submitted
Available
2 BLOCK DIAGRAM Block Diagram
Adobe Acrobat PDF (50 kB)
2016-07-05 00:00:00
N/A
2 PART PLACEMENT Parts List/Tune Up Info
Adobe Acrobat PDF (483 kB)
2016-07-05 00:00:00
N/A

APP # 3 (2016-07-06)

App # Document Type Submitted
Available
3 BLOCK DIAGRAM Block Diagram
Adobe Acrobat PDF (37 kB)
2016-07-05 00:00:00
N/A
3 PCB LAYOUT Parts List/Tune Up Info
Adobe Acrobat PDF (2472 kB)
2016-07-05 00:00:00
N/A

APP # 2 (2016-07-06)

App # Document Type Submitted
Available
2 TUNE UP Parts List/Tune Up Info
Adobe Acrobat PDF (84 kB)
2016-07-05 00:00:00
N/A
2 PCB LAYOUT Parts List/Tune Up Info
Adobe Acrobat PDF (2472 kB)
2016-07-05 00:00:00
N/A

APP # 3 (2016-07-06)

App # Document Type Submitted
Available
3 Attestation Statements BOM Parts List/Tune Up Info
Adobe Acrobat PDF (84 kB)
2016-07-05 00:00:00
N/A

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Golden Unions Limited
FCC Registration Number (FRN): 0025190919
Alphanumeric FCC ID: 2AG78B2
Unique Application Identifier: XSgdynTOLZRJaZdjAyXElg==
Line one: UNIT 1010, MIRAMAR TOWER,
Line two: 132 NATHAN ROAD, TSIMSHATSUI
City: KL
State: N/A
Country: Hong Kong

TCB Information
TCB Application Email Address: roy.ediss@element.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: 2AG78
Product Code: B2

Person at the applicant's address to receive grant or for contact
Name: Pepper Zhang
Title: Engineer
Telephone Number: 0755-36882183 Extension:
Fax Number: 0755-33229357
Email: charityzx@hotmail.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCE - PCS Licensed Transmitter held to ear
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 3G Smart Phone

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Waltek Services(Shenzhen) Co., Ltd.
First Name:   Philo
Last Name:   zhong
Telephone Number: 0086-755-27553488 Extension:
Fax Number:  0086-755-27553868
E-mail:  philo@waltek.com.cn

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output power listed is ERP for FCC Rule Part 22H and output power listed is EIRP for FCC Rule Part 24E. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filling. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filling, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between device and the user’s body. End-users must be informed of the body-worn operating requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.3W/kg, 0.59W/kg, 0.87W/kg and 1.06W/kg respectively. This device also contains functions that are not operational in U.S. Territories. This filling is only applicable for US Operations.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Philo Zhong
Title of authorized signature:  Manager

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Golden Unions Limited
FCC Registration Number (FRN): 0025190919
Alphanumeric FCC ID: 2AG78B2
Unique Application Identifier: IrQgKtsEaV+4880OkthtLQ==
Line one: UNIT 1010, MIRAMAR TOWER,
Line two: 132 NATHAN ROAD, TSIMSHATSUI
City: KL
State: N/A
Country: Hong Kong

TCB Information
TCB Application Email Address: roy.ediss@element.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: 2AG78
Product Code: B2

Person at the applicant's address to receive grant or for contact
Name: Pepper Zhang
Title: Engineer
Telephone Number: 0755-36882183 Extension:
Fax Number: 0755-33229357
Email: charityzx@hotmail.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 3G Smart Phone

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Waltek Services(Shenzhen) Co., Ltd.
First Name:   Philo
Last Name:   zhong
Telephone Number: 0086-755-27553488 Extension:
Fax Number:  0086-755-27553868
E-mail:  philo@waltek.com.cn

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
RF output power is conducted This device has 20 MHz and 40 MHz bandwidth modes. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures; End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filling. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filling, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between device and the user’s body. End-users must be informed of the body-worn operating requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.3W/kg, 0.59W/kg, 0.87W/kg and 1.06W/kg respectively.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Philo Zhong
Title of authorized signature:  Manager

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Golden Unions Limited
FCC Registration Number (FRN): 0025190919
Alphanumeric FCC ID: 2AG78B2
Unique Application Identifier: hrNP2R7n7P3jWmUpAosZOg==
Line one: UNIT 1010, MIRAMAR TOWER,
Line two: 132 NATHAN ROAD, TSIMSHATSUI
City: KL
State: N/A
Country: Hong Kong

TCB Information
TCB Application Email Address: roy.ediss@element.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: 2AG78
Product Code: B2

Person at the applicant's address to receive grant or for contact
Name: Pepper Zhang
Title: Engineer
Telephone Number: 0755-36882183 Extension:
Fax Number: 0755-33229357
Email: charityzx@hotmail.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DSS - Part 15 Spread Spectrum Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 3G Smart Phone

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Waltek Services(Shenzhen) Co., Ltd.
First Name:   Philo
Last Name:   zhong
Telephone Number: 0086-755-27553488 Extension:
Fax Number:  0086-755-27553868
E-mail:  philo@waltek.com.cn

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
RF output power is conducted The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures; SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filling. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filling, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between device and the user’s body. End-users must be informed of the body-worn operating requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.3W/kg, 0.59W/kg, 0.87W/kg and 1.06W/kg respectively.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Philo Zhong
Title of authorized signature:  manager

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TRaC Global Ltd
100 Frobisher Business Park Leigh Sinton Road, Malvern, Worcestershire
Malvern, WR14 1BX
United Kingdom
Date of Grant: 07/06/2016

Application Dated: 07/05/2016
Golden Unions Limited
UNIT 1010, MIRAMAR TOWER,
132 NATHAN ROAD, TSIMSHATSUI
KL,
Hong Kong
 
Attention: Pepper Zhang , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG78B2
Name of Grantee:  Golden Unions Limited
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 3G Smart Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.003  

RF output power is conducted The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures; SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filling. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filling, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between device and the user’s body. End-users must be informed of the body-worn operating requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.3W/kg, 0.59W/kg, 0.87W/kg and 1.06W/kg respectively.

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Golden Unions Limited
UNIT 1010, MIRAMAR TOWER, 132 NATHAN ROAD, TSIMSHATSUI
KL,
Hong Kong
  Date of Grant: 07/06/2016

Application Dated: 07/05/2016
 
Attention: Pepper Zhang , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG78B2
Name of Grantee:  Golden Unions Limited
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 3G Smart Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.003  

RF output power is conducted The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures; SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filling. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filling, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between device and the user’s body. End-users must be informed of the body-worn operating requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.3W/kg, 0.59W/kg, 0.87W/kg and 1.06W/kg respectively.



Mail To:


EA173431
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TRaC Global Ltd
100 Frobisher Business Park Leigh Sinton Road, Malvern, Worcestershire
Malvern, WR14 1BX
United Kingdom
Date of Grant: 07/06/2016

Application Dated: 07/05/2016
Golden Unions Limited
UNIT 1010, MIRAMAR TOWER,
132 NATHAN ROAD, TSIMSHATSUI
KL,
Hong Kong
 
Attention: Pepper Zhang , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG78B2
Name of Grantee:  Golden Unions Limited
Equipment Class: Digital Transmission System
Notes: 3G Smart Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.009  
15C 2402.0  -  2480.0 0.0004  

RF output power is conducted This device has 20 MHz and 40 MHz bandwidth modes. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures; End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filling. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filling, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between device and the user’s body. End-users must be informed of the body-worn operating requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.3W/kg, 0.59W/kg, 0.87W/kg and 1.06W/kg respectively.

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Golden Unions Limited
UNIT 1010, MIRAMAR TOWER, 132 NATHAN ROAD, TSIMSHATSUI
KL,
Hong Kong
  Date of Grant: 07/06/2016

Application Dated: 07/05/2016
 
Attention: Pepper Zhang , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG78B2
Name of Grantee:  Golden Unions Limited
Equipment Class: Digital Transmission System
Notes: 3G Smart Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.009  
15C 2402.0  -  2480.0 0.0004  

RF output power is conducted This device has 20 MHz and 40 MHz bandwidth modes. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures; End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filling. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filling, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between device and the user’s body. End-users must be informed of the body-worn operating requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.3W/kg, 0.59W/kg, 0.87W/kg and 1.06W/kg respectively.



Mail To:


EA401819
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TRaC Global Ltd
100 Frobisher Business Park Leigh Sinton Road, Malvern, Worcestershire
Malvern, WR14 1BX
United Kingdom
Date of Grant: 07/06/2016

Application Dated: 07/05/2016
Golden Unions Limited
UNIT 1010, MIRAMAR TOWER,
132 NATHAN ROAD, TSIMSHATSUI
KL,
Hong Kong
 
Attention: Pepper Zhang , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG78B2
Name of Grantee:  Golden Unions Limited
Equipment Class: PCS Licensed Transmitter held to ear
Notes: 3G Smart Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.161 2.5  PM 249KGXW
22H 824.2  -  848.8 1.164 2.5  PM 245KGXW
22H 826.4  -  846.6 0.057 2.5  PM 4M15F9W
22H 826.4  -  846.6 0.057 2.5  PM 4M24F9W
22H 826.4  -  846.6 0.053 2.5  PM 4M15F9W
24E 1850.2  -  1909.8 1.019 2.5  PM 250KGXW
24E 1850.2  -  1909.8 0.925 2.5  PM 245KGXW
24E 1852.4  -  1907.6 0.154 2.5  PM 4M19F9W
24E 1852.4  -  1907.6 0.158 2.5  PM 4M16F9W
24E 1852.4  -  1907.6 0.151 2.5  PM 4M22F9W

Output power listed is ERP for FCC Rule Part 22H and output power listed is EIRP for FCC Rule Part 24E. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filling. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filling, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between device and the user’s body. End-users must be informed of the body-worn operating requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.3W/kg, 0.59W/kg, 0.87W/kg and 1.06W/kg respectively. This device also contains functions that are not operational in U.S. Territories. This filling is only applicable for US Operations.

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Golden Unions Limited
UNIT 1010, MIRAMAR TOWER, 132 NATHAN ROAD, TSIMSHATSUI
KL,
Hong Kong
  Date of Grant: 07/06/2016

Application Dated: 07/05/2016
 
Attention: Pepper Zhang , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG78B2
Name of Grantee:  Golden Unions Limited
Equipment Class: PCS Licensed Transmitter held to ear
Notes: 3G Smart Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.161 2.5  PM 249KGXW
22H 824.2  -  848.8 1.164 2.5  PM 245KGXW
22H 826.4  -  846.6 0.057 2.5  PM 4M15F9W
22H 826.4  -  846.6 0.057 2.5  PM 4M24F9W
22H 826.4  -  846.6 0.053 2.5  PM 4M15F9W
24E 1850.2  -  1909.8 1.019 2.5  PM 250KGXW
24E 1850.2  -  1909.8 0.925 2.5  PM 245KGXW
24E 1852.4  -  1907.6 0.154 2.5  PM 4M19F9W
24E 1852.4  -  1907.6 0.158 2.5  PM 4M16F9W
24E 1852.4  -  1907.6 0.151 2.5  PM 4M22F9W

Output power listed is ERP for FCC Rule Part 22H and output power listed is EIRP for FCC Rule Part 24E. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filling. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filling, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between device and the user’s body. End-users must be informed of the body-worn operating requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.3W/kg, 0.59W/kg, 0.87W/kg and 1.06W/kg respectively. This device also contains functions that are not operational in U.S. Territories. This filling is only applicable for US Operations.



Mail To:


EA702842

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details