FCC ID 2AG7C-R833

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany

Date of Grant: 02/07/2024 Application Dated: 02/07/2024

Hangzhou Meari Technology Co., Ltd.

Room 604-605, Building 1,No.768 Jianghong Road,

Changhe street, Binjiang District,

Hangzhou, Zhejiang,, China

Attention: Zhiyang Chai , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AG7C-R833
Name of Grantee:	Hangzhou Meari Technology Co., Ltd.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	CAMERA WIFI Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5240.0	0.0619
CC	15E	5260.0  -  5320.0	0.0627
CC	15E	5500.0  -  5700.0	0.0491
CC	15E	5745.0  -  5825.0	0.0419

Power listed is maximum average conducted output power. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device supports 20MHz bandwidth modes as described in this filing. Device is a client only device and 802.11a/n modes configuration. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The device also supports 2.4GHzWLAN and BLE transmitters.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Hangzhou Meari Technology Co., Ltd. Room 604-605, Building 1,No.768 Jianghong Road, Changhe street, Binjiang District, Hangzhou, Zhejiang,, China

Date of Grant: 02/07/2024 Application Dated: 02/07/2024

Attention: Zhiyang Chai , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AG7C-R833
Name of Grantee:	Hangzhou Meari Technology Co., Ltd.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	CAMERA WIFI Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5240.0	0.0619
CC	15E	5260.0  -  5320.0	0.0627
CC	15E	5500.0  -  5700.0	0.0491
CC	15E	5745.0  -  5825.0	0.0419

Power listed is maximum average conducted output power. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device supports 20MHz bandwidth modes as described in this filing. Device is a client only device and 802.11a/n modes configuration. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The device also supports 2.4GHzWLAN and BLE transmitters.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application b3HHZ0+G8FmD0zyp5NXXNw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany

Date of Grant: 02/07/2024 Application Dated: 02/07/2024

Hangzhou Meari Technology Co., Ltd.

Room 604-605, Building 1,No.768 Jianghong Road,

Changhe street, Binjiang District,

Hangzhou, Zhejiang,, China

Attention: Zhiyang Chai , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AG7C-R833
Name of Grantee:	Hangzhou Meari Technology Co., Ltd.
Equipment Class:	Digital Transmission System
Notes:	CAMERA WIFI Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0  -  2480.0	0.0196
CC	15C	2412.0  -  2462.0	0.2506

Power listed is maximum peak conducted output power. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device supports 20MHz bandwidth modes as described in this filing. Device is a client only device and 802.11b/g/n modes configuration, OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The device also supports 5GHzWLAN transmitters.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Hangzhou Meari Technology Co., Ltd. Room 604-605, Building 1,No.768 Jianghong Road, Changhe street, Binjiang District, Hangzhou, Zhejiang,, China

Date of Grant: 02/07/2024 Application Dated: 02/07/2024

Attention: Zhiyang Chai , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AG7C-R833
Name of Grantee:	Hangzhou Meari Technology Co., Ltd.
Equipment Class:	Digital Transmission System
Notes:	CAMERA WIFI Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0  -  2480.0	0.0196
CC	15C	2412.0  -  2462.0	0.2506

Power listed is maximum peak conducted output power. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device supports 20MHz bandwidth modes as described in this filing. Device is a client only device and 802.11b/g/n modes configuration, OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The device also supports 5GHzWLAN transmitters.

CC:	This device is certified pursuant to two different Part 15 rules sections.

Mail To: