FCC ID 2AG7G-A1A
Plume Pod
by Plume Design Inc
Grantee Code: 2AG7G Product Code: A1A
Latest application date: 2017-03-16
FCC ID Device Details
| FCC ID | 2AG7G-A1A |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AG7G |
| Product Code | A1A |
| Applicant Business | Plume Design Inc 🇺🇸 |
| Related Domains |  plume.com  sporton.com.tw |
| Equipment Class | Plume Pod |
| Test Firm | SPORTON International Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2017-03-16 |
| 5180-5240 MHz | Original Equipment | 2016-11-17 |
| 2402-2480 MHz | Original Equipment | 2016-11-17 |
| 2402-2480 MHz | Original Equipment | 2016-11-17 |
Exhibits
Application Information
| Application ID | U7o3i0Fy8Ft2veJTKc5IbA== |
|---|---|
| Final Action Date | 2017-03-16 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0025181934 |
| Model | A1A |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Plume Pod |
| Responsible Party | Nora Huen Ching Yan, Director of HW Engineering, TW, nora@plume.com , 4084985512 |
| Technical Contact | Jones Tsai, Sporton International Inc., AvaChen@sporton.com.tw , EvanChen@sporton.com.tw , 033273456 |
| Non-Technical Contact | Jones Tsai, Sporton International Inc., AvaChen@sporton.com.tw , EvanChen@sporton.com.tw , 033273456 |
| Test Firm | Alex Chen, SPORTON International Inc., alex@sporton.com.tw , 886-3-327-3456 |
| TCB Email | LST.FRE.CertNotice@ul.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 05/29/2017 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class II Permissive Change to add U-NII Bands 2A and 2C. Output power listed is conducted. In-band EIRP is less than 500 mW in bands 2A and 2C. This device supports 20 MHz, 40 MHz, and 80 MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| U7o3i0Fy8Ft2veJTKc5IbA== | 2017-03-16 | Class II permissive change or modification of presently authorized equipment |
| V3fDCHqW8GqGQbo2CwF/5Q== | 2016-11-17 | Original Equipment |
| R1WXEX0ifyuWAzuFMByiNg== | 2016-11-17 | Original Equipment |
| 4K/RbLxdVO745pTs1H1wAQ== | 2016-11-17 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application V3fDCHqW8GqGQbo2CwF/5Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/17/2016 Application Dated: 11/17/2016 |
| Plume Design Inc |
| 325 Lytton Ave. |
| Palo Alto, CA 94301 |
| Attention: Nora Huen Ching Yan , Director of HW Engineering, TW |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AG7G-A1A |
| Name of Grantee: | Plume Design Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Plume Pod |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.1875 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.166 |
| Power listed is maximum combined conducted output. This device supports bandwidths of 20MHz, 40 MHz, and 80 MHz. The antenna(s) used for this transmitter must be installed to provide a minimum of 20 cm separation between the antenna and user and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter guidance. This device is restricted to indoor only operations when operating in the 5150-5250 MHz band. Installers and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application V3fDCHqW8GqGQbo2CwF/5Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Plume Design Inc 325 Lytton Ave. Palo Alto, CA 94301 United States |
Date of Grant: 11/17/2016 Application Dated: 11/17/2016 |
| Attention: Nora Huen Ching Yan , Director of HW Engineering, TW |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AG7G-A1A |
| Name of Grantee: | Plume Design Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Plume Pod |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.1875 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.166 |
| Power listed is maximum combined conducted output. This device supports bandwidths of 20MHz, 40 MHz, and 80 MHz. The antenna(s) used for this transmitter must be installed to provide a minimum of 20 cm separation between the antenna and user and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter guidance. This device is restricted to indoor only operations when operating in the 5150-5250 MHz band. Installers and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/16/2017 Application Dated: 01/20/2017 |
| Plume Design Inc |
| 325 Lytton Ave. |
| Palo Alto, CA 94301 |
| Attention: Nora Huen Ching Yan , Director of HW Engineering, TW |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AG7G-A1A |
| Name of Grantee: | Plume Design Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Plume Pod |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.1875 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.171 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.2153 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.166 |
| Class II Permissive Change to add U-NII Bands 2A and 2C. Output power listed is conducted. In-band EIRP is less than 500 mW in bands 2A and 2C. This device supports 20 MHz, 40 MHz, and 80 MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application U7o3i0Fy8Ft2veJTKc5IbA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Plume Design Inc 325 Lytton Ave. Palo Alto, CA 94301 United States |
Date of Grant: 03/16/2017 Application Dated: 01/20/2017 |
| Attention: Nora Huen Ching Yan , Director of HW Engineering, TW |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AG7G-A1A |
| Name of Grantee: | Plume Design Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Plume Pod |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.1875 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.171 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.2153 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.166 |
| Class II Permissive Change to add U-NII Bands 2A and 2C. Output power listed is conducted. In-band EIRP is less than 500 mW in bands 2A and 2C. This device supports 20 MHz, 40 MHz, and 80 MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/17/2016 Application Dated: 11/17/2016 |
| Plume Design Inc |
| 325 Lytton Ave. |
| Palo Alto, CA 94301 |
| Attention: Nora Huen Ching Yan , Director of HW Engineering, TW |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AG7G-A1A |
| Name of Grantee: | Plume Design Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Plume Pod |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0027 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.5383 |
| Power listed is maximum combined conducted output. This device supports bandwidths of 20 MHz and 40 MHz. The antenna(s) used for this transmitter must be installed to provide a minimum of 20 cm separation between the antenna and user and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter guidance. Installers and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application R1WXEX0ifyuWAzuFMByiNg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Plume Design Inc 325 Lytton Ave. Palo Alto, CA 94301 United States |
Date of Grant: 11/17/2016 Application Dated: 11/17/2016 |
| Attention: Nora Huen Ching Yan , Director of HW Engineering, TW |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AG7G-A1A |
| Name of Grantee: | Plume Design Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Plume Pod |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0027 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.5383 |
| Power listed is maximum combined conducted output. This device supports bandwidths of 20 MHz and 40 MHz. The antenna(s) used for this transmitter must be installed to provide a minimum of 20 cm separation between the antenna and user and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter guidance. Installers and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/17/2016 Application Dated: 11/17/2016 |
| Plume Design Inc |
| 325 Lytton Ave. |
| Palo Alto, CA 94301 |
| Attention: Nora Huen Ching Yan , Director of HW Engineering, TW |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AG7G-A1A |
| Name of Grantee: | Plume Design Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Plume Pod |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 |
| Power listed is maximum conducted output. The antenna(s) used for this transmitter must be installed to provide a minimum of 20 cm separation between the antenna and user and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter guidance. Installers and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 4K/RbLxdVO745pTs1H1wAQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Plume Design Inc 325 Lytton Ave. Palo Alto, CA 94301 United States |
Date of Grant: 11/17/2016 Application Dated: 11/17/2016 |
| Attention: Nora Huen Ching Yan , Director of HW Engineering, TW |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AG7G-A1A |
| Name of Grantee: | Plume Design Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Plume Pod |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 |
| Power listed is maximum conducted output. The antenna(s) used for this transmitter must be installed to provide a minimum of 20 cm separation between the antenna and user and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter guidance. Installers and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |