FCC ID 2AG87DLM168N

Wi-Fi Radio Transceiver

by Doodle Labs (SG) Pte Ltd

Grantee Code: 2AG87   Product Code: DLM168N
Latest application date: 2017-03-07

FCC ID Device Details

FCC ID2AG87DLM168N
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AG87
Product CodeDLM168N
Applicant BusinessDoodle Labs (SG) Pte Ltd 🇸🇬
Related Domains doodlelabs.com
Equipment ClassWi-Fi Radio Transceiver
Test FirmShenzhen Tongce Testing Lab

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5230 MHzOriginal Equipment2017-03-07
2412-2462 MHzOriginal Equipment2017-03-07

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2017-03-07PDF 233.6 KB
Internal photosInternal Photos2017-03-07PDF 375.2 KB
External photosExternal Photos2017-03-07PDF 497.9 KB
LabelID Label/Location Info2017-03-07PDF 47.6 KB
Test setup photosTest Setup Photos2017-03-07PDF 295.9 KB
Test Report 1Test Report2017-03-07PDF 5.6 MB
Test Report 1 revTest Report2017-03-07PDF 5.7 MB
Test Report 2Test Report2017-03-07PDF 5.9 MB
Test Report 3Test Report2017-03-07PDF 6 MB
Test Report 3Test Report2017-03-07PDF 4.6 MB
Test report 1Test Report2017-03-07PDF 5.2 MB
Test report 15.407-1Test Report2017-03-07PDF 5.8 MB
Test report 15.407-2Test Report2017-03-07PDF 5.5 MB
Test report 15.407-3Test Report2017-03-07PDF 4.8 MB
Test report 15.407-4Test Report2017-03-07PDF 2 MB
Test report 2Test Report2017-03-07PDF 5.3 MB
Test report 4Test Report2017-03-07PDF 2.1 MB
Test report 4Test Report2017-03-07PDF 3.8 MB
Test report revTest Report2017-03-07PDF 5.2 MB
Authorization Letter revCover Letter(s)2017-03-07PDF 14.2 KB
Authorization letterCover Letter(s)2017-03-07PDF 14.1 KB
Confidentiality requestCover Letter(s)2017-03-07PDF 42.6 KB
Confirmation letterCover Letter(s)2017-03-07PDF 42.6 KB
Model statementCover Letter(s)2017-03-07PDF 31.5 KB
Model statement revCover Letter(s)2017-03-07PDF 31.5 KB
Modular transmitterCover Letter(s)2017-03-07PDF 174 KB
RF exposure calculationRF Exposure Info2017-03-07PDF 220 KB
RF exposure infoRF Exposure Info2017-03-07PDF 220 KB
RF exposure reportRF Exposure Info2017-03-07PDF 220 KB
Block Diagram Metadata onlyBlock DiagramPDF 86.5 KB
Schematics Metadata onlySchematicsPDF 1.9 MB
Operational Description Metadata onlyOperational DescriptionPDF 63.4 KB
Software configuration declaration Metadata onlySDR Software/Security InfPDF 31.4 KB
Software configuration letter rev Metadata onlySDR Software/Security InfPDF 31.5 KB
Software security info Metadata onlySDR Software/Security InfPDF 27.1 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 55.8 KB

Application Information

Application IDrBkSO93tTHLqNo0PJbapWw==
Final Action Date2017-03-07
Application PurposeOriginal Equipment
Applicant FRN0022560528
ModelDLM168N
Frequency Range5180-5230 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWi-Fi Radio Transceiver
Responsible PartyDr Aaron Do, Senior RF Engineer, aaron.do@doodlelabs.com , +65 6253 0100
Technical ContactJoe Zhou, Shenzhen Tongce Testing Lab, joe.zhou@tct-lab.com , 86-0755-36638142
Test FirmCharlle Lai, Shenzhen Tongce Testing Lab, 184199833@qq.com , 15112400427
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModular Approval. Power Output listed is the maximum combined conducted output power. Device is a 3x3 MIMO, as described within this filing. This grant is valid only when the device is sold to OEM integrator. The transmitter module may not be collocated with any other transmitter or antenna. The module shall be only used with the integral antennas that has been originally tested and certified with this module. A distance of 20 cm shall be maintained between the antenna and users. The OEM integrator is responsible for testing the end product for any additional compliance requirements required with this module. Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements. Device supports 20/40/80 MHz bandwidth modes.

Applications

Application IDDatePurpose
rBkSO93tTHLqNo0PJbapWw==2017-03-07Original Equipment
67zUymzNbVZKD1lB7tE9IA==2017-03-07Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.440000015CCC, MO
5180-5230 MHz0.4315E38, CC, MO
5745-5825 MHz0.2515E38, CC, MO

Grants

TCB Grant - Application rBkSO93tTHLqNo0PJbapWw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 03/07/2017

Application Dated: 03/07/2017
Doodle Labs (SG) Pte Ltd
150 Kampong Ampat, KA Center, Suite 05-03
Singapore, 368324
Singapore
 
Attention: Dr Aaron Do , Senior RF Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG87DLM168N
Name of Grantee:  Doodle Labs (SG) Pte Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wi-Fi Radio Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5230.0 0.43  
38 CC MO 15E 5745.0  -  5825.0 0.25  

Modular Approval. Power Output listed is the maximum combined conducted output power. Device is a 3x3 MIMO, as described within this filing. This grant is valid only when the device is sold to OEM integrator. The transmitter module may not be collocated with any other transmitter or antenna. The module shall be only used with the integral antennas that has been originally tested and certified with this module. A distance of 20 cm shall be maintained between the antenna and users. The OEM integrator is responsible for testing the end product for any additional compliance requirements required with this module. Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements.

Device supports 20/40/80 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application rBkSO93tTHLqNo0PJbapWw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Doodle Labs (SG) Pte Ltd
150 Kampong Ampat, KA Center, Suite 05-03
Singapore, 368324
Singapore
  Date of Grant: 03/07/2017

Application Dated: 03/07/2017
 
Attention: Dr Aaron Do , Senior RF Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG87DLM168N
Name of Grantee:  Doodle Labs (SG) Pte Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wi-Fi Radio Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5230.0 0.43  
38 CC MO 15E 5745.0  -  5825.0 0.25  

Modular Approval. Power Output listed is the maximum combined conducted output power. Device is a 3x3 MIMO, as described within this filing. This grant is valid only when the device is sold to OEM integrator. The transmitter module may not be collocated with any other transmitter or antenna. The module shall be only used with the integral antennas that has been originally tested and certified with this module. A distance of 20 cm shall be maintained between the antenna and users. The OEM integrator is responsible for testing the end product for any additional compliance requirements required with this module. Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements.

Device supports 20/40/80 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 67zUymzNbVZKD1lB7tE9IA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 03/07/2017

Application Dated: 03/07/2017
Doodle Labs (SG) Pte Ltd
150 Kampong Ampat, KA Center, Suite 05-03
Singapore, 368324
Singapore
 
Attention: Dr Aaron Do , Senior RF Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG87DLM168N
Name of Grantee:  Doodle Labs (SG) Pte Ltd
Equipment Class: Digital Transmission System
Notes: Wi-Fi Radio Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.44  

Modular Approval. Power Output listed is Conducted. Device is a 3x3 MIMO, as described within this filing. This grant is valid only when the device is sold to OEM integrators. The transmitter module may not be collocated with any other transmitter or antenna. The module shall be only used with the integral antennas that has been originally tested and certified with this module. A distance of 20 cm shall be maintained between the antenna and users. The OEM integrator is responsible for testing the end-product for any additional compliance requirements required with this module.

Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements.

Device supports 801.11b/g/20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 67zUymzNbVZKD1lB7tE9IA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Doodle Labs (SG) Pte Ltd
150 Kampong Ampat, KA Center, Suite 05-03
Singapore, 368324
Singapore
  Date of Grant: 03/07/2017

Application Dated: 03/07/2017
 
Attention: Dr Aaron Do , Senior RF Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG87DLM168N
Name of Grantee:  Doodle Labs (SG) Pte Ltd
Equipment Class: Digital Transmission System
Notes: Wi-Fi Radio Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.44  

Modular Approval. Power Output listed is Conducted. Device is a 3x3 MIMO, as described within this filing. This grant is valid only when the device is sold to OEM integrators. The transmitter module may not be collocated with any other transmitter or antenna. The module shall be only used with the integral antennas that has been originally tested and certified with this module. A distance of 20 cm shall be maintained between the antenna and users. The OEM integrator is responsible for testing the end-product for any additional compliance requirements required with this module.

Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements.

Device supports 801.11b/g/20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: