FCC ID 2AG87RM2450-2L

Mesh Rider Radio

by Doodle Labs (SG) Pte Ltd

Grantee Code: 2AG87   Product Code: RM24502L
Latest application date: 2025-04-30

FCC ID Device Details

FCC ID2AG87RM2450-2L
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AG87
Product CodeRM24502L
Applicant BusinessDoodle Labs (SG) Pte Ltd 🇸🇬
Related Domains doodlelabs.com
Equipment ClassMesh Rider Radio
Test FirmTUV Rheinland Taiwan Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2025-04-30
2412-2462 MHzOriginal Equipment2023-01-19

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2023-01-19PDF 923.1 KB
User ManualUsers ManualPDF 931.7 KB
Internal PhotosInternal PhotosPDF 4.5 MB
Internal PhotosInternal PhotosPDF 5.8 MB
External PhotosExternal PhotosPDF 632.8 KB
External PhotosExternal PhotosPDF 3.3 MB
ID Label and LocationID Label/Location Info2025-04-30PDF 683.2 KB
Product Label and Location Metadata onlyID Label/Location Info2025-04-30PDF 533 KB
ID Label and LocationID Label/Location Info2023-01-19PDF 533.3 KB
Test Setup PhotosTest Setup Photos2023-01-19PDF 605.7 KB
Test Setup PhotosTest Setup PhotosPDF 1.1 MB
Antenna Gain Info_RN-SMA-S-RPTest Report2025-04-30PDF 303.3 KB
Antenna Gain Info_RN-SMA4-RPTest Report2025-04-30PDF 125.5 KB
Test Report_Part 1Test Report2025-04-30PDF 3.5 MB
Test Report_Part 2Test Report2025-04-30PDF 2.2 MB
ANT Datasheet_RN-SMA-S-RPTest Report2023-01-19PDF 305.7 KB
ANT Datasheet_RN-SMA4-RPTest Report2023-01-19PDF 178.6 KB
Test Report_DTSTest Report2023-01-19PDF 1.5 MB
Test Report_DTS_Appendix A_Part1Test Report2023-01-19PDF 4.9 MB
Test Report_DTS_Appendix A_Part2Test Report2023-01-19PDF 4 MB
Test Report_DTS_Appendix A_Part3Test Report2023-01-19PDF 4 MB
Test Report_DTS_Appendix B_Part1Test Report2023-01-19PDF 5 MB
Test Report_DTS_Appendix B_Part2Test Report2023-01-19PDF 4.9 MB
Test Report_DTS_Appendix B_Part3Test Report2023-01-19PDF 286 KB
Attestation of US AgentAttestation Statements2025-04-30PDF 747.9 KB
Not Covered Entity Applicant AttestationAttestation Statements2025-04-30PDF 579.3 KB
Not Covered Equipment AttestationAttestation Statements2025-04-30PDF 583.3 KB
Agency LetterCover Letter(s)2025-04-30PDF 573.7 KB
C2PC LetterCover Letter(s)2025-04-30PDF 439.7 KB
Confidentiality LetterCover Letter(s)2025-04-30PDF 702.1 KB
Modular approval Request letterCover Letter(s)2025-04-30PDF 494 KB
Authoity to Act as AgentCover Letter(s)2023-01-19PDF 635.1 KB
Confidentiality Request LetterCover Letter(s)2023-01-19PDF 696.4 KB
Confidentiality Request Letter_FCC_r1 Metadata onlyCover Letter(s)2023-01-19PDF 696.4 KB
Declaration of Similarity LetterCover Letter(s)2023-01-19PDF 328.5 KB
Modular Approval Request Letter Metadata onlyCover Letter(s)2023-01-19PDF 529.8 KB
Modular Approval Request Letter_r1Cover Letter(s)2023-01-19PDF 529.8 KB
RF Exposure InfoRF Exposure Info2025-04-30PDF 877 KB
RF Exposure InfoRF Exposure Info2023-01-19PDF 1.1 MB
Block Diagram Metadata onlyBlock DiagramPDF 826.3 KB
Schematics Diagram_CPU_R Metadata onlySchematicsPDF 799.1 KB
Schematics Diagram_FES Metadata onlySchematicsPDF 578.8 KB
Schematics_DLM203_CPU_RM-2450-12M3_M4 Metadata onlySchematicsPDF 708.4 KB
Operation Description_Datasheet Metadata onlyOperational DescriptionPDF 1.4 MB
Operation Description_Product Brief Metadata onlyOperational DescriptionPDF 366.5 KB
Operational Description Metadata onlyOperational DescriptionPDF 794.5 KB
Operational Description_lima_datasheet Metadata onlyOperational DescriptionPDF 1.4 MB
Operational Description_qca4531-product-brief Metadata onlyOperational DescriptionPDF 366.5 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 323.6 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 332.3 KB
Parts List_RM-2450-12M3 Metadata onlyParts List/Tune Up InfoPDF 331.7 KB
Parts List_RM-2450-12M4 Metadata onlyParts List/Tune Up InfoPDF 331.2 KB
Parts List_RM-2450-2L Metadata onlyParts List/Tune Up InfoPDF 332.3 KB

Application Information

Application IDFalquvqCTizUfPR9PENCeg==
Final Action Date2025-04-30
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0022560528
ModelRM2450-2L
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionMesh Rider Radio
Responsible PartySanjay Malani, Product Engineering Manager, sanjay.malani@doodlelabs.com , +65 6253 0100
Technical ContactSanjay Malani, Doodle Labs (SG) Pte Ltd, sanjay.malani@doodlelabs.com , +6562530100
Test FirmZeus Chen, TUV Rheinland Taiwan Ltd., zeusyr.chen@tuv.com , +886 2-21721623
TCB Emailtcb-hotline@tuv.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass 2 Permissive Change of miscellaneous update as described in the filing. Single Modular Approval. Output power listed is conducted. The device supports 2x2 MIMO operation mode. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The installation of the transmitter must ensure that the antenna has a separation distance of at least 20 cm from all persons or compliance must be demonstrated according to FCC SAR procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.

Applications

Application IDDatePurpose
FalquvqCTizUfPR9PENCeg==2025-04-30Class II permissive change or modification of presently authorized equipment
yBG6TUh6ukmjEeb0yR3eCw==2023-01-19Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2467 MHz0.468415CMO
2412-2467 MHz0.4684MO
2412-2462 MHz0.425715CMO
2412-2462 MHz0.4257MO

Grants

TCB Grant - Application yBG6TUh6ukmjEeb0yR3eCw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 01/19/2023

Application Dated: 01/15/2023
Doodle Labs (SG) Pte Ltd
150 Kampong Ampat, KA Center, Suite 05-03
Singapore, 368324
Singapore
 
Attention: Dr Aaron Do , Senior RF Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG87RM2450-2L
Name of Grantee:  Doodle Labs (SG) Pte Ltd
Equipment Class: Digital Transmission System
Notes: Smart Radio
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15C 2412.0  -  2467.0 0.4684  
MO 15C 2412.0  -  2462.0 0.4257  

Single Modular Approval. Output power listed is conducted. The device supports 2x2 MIMO operation mode. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The installation of the transmitter must ensure that the antenna has a separation distance of at least 20 cm from all persons or compliance must be demonstrated according to FCC SAR procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.

MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application yBG6TUh6ukmjEeb0yR3eCw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Doodle Labs (SG) Pte Ltd
150 Kampong Ampat, KA Center, Suite 05-03
Singapore, 368324
Singapore
  Date of Grant: 01/19/2023

Application Dated: 01/15/2023
 
Attention: Dr Aaron Do , Senior RF Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG87RM2450-2L
Name of Grantee:  Doodle Labs (SG) Pte Ltd
Equipment Class: Digital Transmission System
Notes: Smart Radio
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15C 2412.0  -  2467.0 0.4684  
MO 15C 2412.0  -  2462.0 0.4257  

Single Modular Approval. Output power listed is conducted. The device supports 2x2 MIMO operation mode. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The installation of the transmitter must ensure that the antenna has a separation distance of at least 20 cm from all persons or compliance must be demonstrated according to FCC SAR procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application FalquvqCTizUfPR9PENCeg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 04/30/2025

Application Dated: 04/30/2025
Doodle Labs (SG) Pte Ltd
601 MacPherson Road, Grantral Complex, Suite 07-15
Singapore, 368242
Singapore
 
Attention: Sanjay Malani , Product Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AG87RM2450-2L
Name of Grantee:  Doodle Labs (SG) Pte Ltd
Equipment Class: Digital Transmission System
Notes: Mesh Rider Radio
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15C 2412.0  -  2467.0 0.4684  
MO 15C 2412.0  -  2462.0 0.4257  

Class 2 Permissive Change of miscellaneous update as described in the filing.

Single Modular Approval. Output power listed is conducted. The device supports 2x2 MIMO operation mode. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The installation of the transmitter must ensure that the antenna has a separation distance of at least 20 cm from all persons or compliance must be demonstrated according to FCC SAR procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.