FCC ID 2AGMY-MSM320

2AGMYMSM320, 2AGMY MSM320, 2AGMY-MSM320, 2AGMY-MSM32O, 2AGMY-M5M320

MCT CO., LTD. LoRa RF Module MSM320

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: 2AGMY-MSM320 is 2AGMY. The remaining characters of the FCC ID, -MSM320, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: LoRa RF Module

Application: LoRa RF Module
Equipment Class: DTS - Digital Transmission System
Short Link: fcc.id/2AGMY-MSM320
Sources: FCC.gov | FCC.report
Registered By: MCT CO., LTD. - 2AGMY (South Korea)

App #	Purpose	Date	Unique ID
1	Original Equipment	2015-12-24	oJbG5LBmJFkQNpGjJC3p5Q==

Operating Frequencies

Device operates within approved frequencies overlapping with the following cellular bands: CDMA 2,TACS DOWN |

Frequency Range	Power Output	Rule Parts	Line Entry
917.3-923.3 MHz	1.4 mW	15C	1

Exhibits

Document	Type	Submitted Available
Modular Approval Letter	Cover Letter(s) Adobe Acrobat PDF (66 kB)	2015-12-24 2015-12-24
Test Report	Test Report Adobe Acrobat PDF (1675 kB)	2015-12-24 2015-12-24
RF Exposure Info	RF Exposure Info Adobe Acrobat PDF (83 kB)	2015-12-24 2015-12-24
Label Location	ID Label/Location Info Adobe Acrobat PDF (98 kB)	2015-12-24 2015-12-24
Letter DoC	Cover Letter(s) Adobe Acrobat PDF (245 kB)	2015-12-24 2015-12-24
Confidentiality Letter	Cover Letter(s) Adobe Acrobat PDF (461 kB)	2015-12-24 2015-12-24
Authorization Letter	Cover Letter(s) Adobe Acrobat PDF (282 kB)	2015-12-24 2015-12-24
Test Setup Photos	Test Setup Photos Adobe Acrobat PDF (867 kB)	2015-12-24 2016-06-21
User Manual	Users Manual Adobe Acrobat PDF (1692 kB)	2015-12-24 2016-06-21
Internal Photos	Internal Photos Adobe Acrobat PDF (286 kB)	2015-12-24 2016-06-21
External Photos	External Photos Adobe Acrobat PDF (267 kB)	2015-12-24 2016-06-21
Operational Description	Operational Description Adobe Acrobat PDF (3849 kB)	2015-12-24
Block Diagram	Block Diagram Adobe Acrobat PDF (100 kB)	2015-12-24
Parts List	Parts List/Tune Up Info Adobe Acrobat PDF (106 kB)	2015-12-24
Schematics	Schematics Adobe Acrobat PDF (86 kB)	2015-12-24

Application Forms

1 (2015-12-24)

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	MCT CO., LTD.
FCC Registration Number (FRN):	0025067398
Alphanumeric FCC ID:	2AGMYMSM320
Unique Application Identifier:	oJbG5LBmJFkQNpGjJC3p5Q==
Line one:	hikang@mctalk.co.kr
Line two:	chahn@ltalab.com, rfsar2013@ltalab.com
City:	Seoul
State:	N/A
Country:	South Korea

TCB Information

TCB Application Email Address:	tei@timcoengr.com
TCB Scope:	A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID

Grantee Code:	2AGMY
Product Code:	-MSM320

Person at the applicant's address to receive grant or for contact

Name:

Hee-Il Kang

Telephone Number:

+8202-2047-1622

Extension:

Fax Number:	+8202-2047-1625
Email:	hikang@mctalk.co.kr

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: Yes

If so, specify the short-term confidentiality release date (MM/DD/YYYY format): 06/21/2016
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	LoRa RF Module

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? No

Modular Equipment

Modular Type: Does not apply

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: LTA Co.,Ltd.

First Name: Michael

Last Name: AHN

Telephone Number:

82-31-323-6008

Extension:

Fax Number: 82-31-323-6010

E-mail: chahn@ltalab.com

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must not exceed the gain of 2.0 dBi and must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: Yong-Cheol, Wang

Title of authorized signature: Manager

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669

Date of Grant: 12/24/2015

Application Dated: 12/24/2015

MCT CO., LTD.

hikang@mctalk.co.kr

chahn@ltalab.com, rfsar2013@ltalab.com

Seoul,
South Korea

Attention: Hee-Il Kang

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AGMY-MSM320

Name of Grantee:	MCT CO., LTD.

Equipment Class:	Digital Transmission System
Notes:	LoRa RF Module

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	917.3 - 923.3	0.0014

Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must not exceed the gain of 2.0 dBi and must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

MCT CO., LTD.
hikang@mctalk.co.kr chahn@ltalab.com, rfsar2013@ltalab.com
Seoul,
South Korea