FCC ID 2AGVY-100MWBXX01
2AGVY-100MWBXX01
by Aegex Technologies LLC
Grantee Code: 2AGVY Product Code: 100MWBXX01
Latest application date: 2024-09-27
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-27 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-27 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-27 |
| 2422-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 12/02/2020 | 2024-09-20 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 12/02/2020 | 2024-09-20 |
| 5775 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 12/02/2020 | 2024-09-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Antenna Datasheet (Aux) | Users Manual | 2024-09-27 | PDF 2.1 MB |
| Antenna Datasheet (Main) | Users Manual | 2024-09-27 | PDF 1.8 MB |
| User Manual | Users Manual | 2024-09-20 | PDF 650.7 KB |
| External Photos | External Photos | 2024-09-20 | PDF 54.8 KB |
| Label Location Info | ID Label/Location Info | 2024-09-20 | PDF 35 KB |
| Test Setup Photos | Test Setup Photos | 2024-09-27 | PDF 443.7 KB |
| MPE Report 1 | Test Report | 2024-09-27 | PDF 398.7 KB |
| MPE Report 2 | Test Report | 2024-09-27 | PDF 399 KB |
| MPE Report 3 | Test Report | 2024-09-27 | PDF 406.2 KB |
| MPE Test Report 1 | Test Report | 2024-09-27 | PDF 398.7 KB |
| MPE Test Report 2 | Test Report | 2024-09-27 | PDF 399 KB |
| MPE Test Report 3 | Test Report | 2024-09-27 | PDF 406.2 KB |
| SAR Report 1 of 3 | Test Report | 2024-09-27 | PDF 688.1 KB |
| SAR Test Report 1 of 3 | RF Exposure Info | 2024-09-27 | PDF 688.1 KB |
| SAR Test Report 2 of 3 | RF Exposure Info | 2024-09-27 | PDF 2.4 MB |
| SAR Test Report 3 of 3 Annex E | RF Exposure Info | 2024-09-27 | PDF 225.4 KB |
| SAR Test Report 3 of 3 Annex F 2.4GHz | RF Exposure Info | 2024-09-27 | PDF 3.5 MB |
| SAR Test Report 3 of 3 Annex F 5GHz | RF Exposure Info | 2024-09-27 | PDF 3 MB |
| SAR Test Report 3 of 3 Annex G | RF Exposure Info | 2024-09-27 | PDF 1.6 MB |
| Test Report 1 | Test Report | 2024-09-27 | PDF 4.3 MB |
| Test Report 1 of 2 | Test Report | 2024-09-27 | PDF 4.3 MB |
| Test Report 2 | Test Report | 2024-09-27 | PDF 4.8 MB |
| Test Report 2 of 2 | Test Report | 2024-09-27 | PDF 4.8 MB |
| Applicant Declaration Letter | Attestation Statements | 2024-09-27 | PDF 268.2 KB |
| Agent Authorization Letter | Cover Letter(s) | 2024-09-27 | PDF 138.8 KB |
| C2PC Cover Letter | Cover Letter(s) | 2024-09-27 | PDF 97 KB |
| US Agent Letter | Cover Letter(s) | 2024-09-27 | PDF 185.5 KB |
| Change in ID Authorization Letter | Cover Letter(s) | 2024-09-20 | PDF 104.1 KB |
| Change in ID Cover Letter | Cover Letter(s) | 2024-09-20 | PDF 131 KB |
| SAR Report 2 of 3 | RF Exposure Info | 2024-09-27 | PDF 2.4 MB |
| SAR Report 3 of 3 Annex E | RF Exposure Info | 2024-09-27 | PDF 225.4 KB |
| SAR Report 3 of 3 Annex F 2.4GHz | RF Exposure Info | 2024-09-27 | PDF 3.5 MB |
| SAR Report 3 of 3 Annex F 5GHz | RF Exposure Info | 2024-09-27 | PDF 3 MB |
| SAR Report 3 of 3 Annex G | RF Exposure Info | 2024-09-27 | PDF 1.6 MB |
Application Information
| Application ID | oGnUIBxDIyAa6DkZ8op5cg== |
|---|---|
| Final Action Date | 2024-09-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0025038555 |
| Model | 100MWBXX01 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 2AGVY-100MWBXX01 |
| Responsible Party | Anne Strange, Ms., astrange@aegex.com  , 8142430549 |
| Agent | Martin Martin Martin, SGS North America, Inc., martin.taylor@sgs.com  , 7705701800 |
| Technical Contact | Martin Taylor, SGS North America Inc., martin.taylor@sgs.com , 7705701800 |
| Non-Technical Contact | Martin Taylor, SGS North America, Inc., martin.taylor@sgs.com , 7705701800 |
| Test Firm | David Schramm, SGS North America, Inc., david.schramm@sgs.com , 973-461-7914 |
| TCB Email | uscts.tcb@sgs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to install the single module into a host(tablet), reduced the output power and disabled 160MHz bandwidth mode by firmware and changed the antenna to satisfy RF exposure compliance. SAR compliance for body operating conditions is limited to the specific configurations tested, as described in this filing. The highest reported Body and Simultaneous SAR values are 0.55 W/kg and 1.03W/kg respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| oGnUIBxDIyAa6DkZ8op5cg== | 2024-09-27 | Class II permissive change or modification of presently authorized equipment |
| K/Fs8uxYpBP8AdjKXbSBXw== | 2024-09-27 | Class II permissive change or modification of presently authorized equipment |
| FVa+8rjfobvjjC3Ta+w5NQ== | 2024-09-27 | Class II permissive change or modification of presently authorized equipment |
| rModlcwQ0EpjoM3J9SBCoQ== | 2024-09-20 | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 12/02/2020 |
| qXP8z15gE128W/qUnbVQDw== | 2024-09-20 | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 12/02/2020 |
| /qiu7NC6zg6KQsKo0MuL6g== | 2024-09-20 | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 12/02/2020 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.0095 | 15C | CC |
| 2402-2480 MHz | 0.0130000 | 15C | CC |
| 2402-2480 MHz | 0.009 | 15C | CC |
| 2402-2480 MHz | 0.0122000 | 15C | CC |
| 2412-2472 MHz | 0.787 | 15C | CC, MO |
| 2412-2472 MHz | 0.0398 | 15C | CC, MO |
| 2422-2462 MHz | 0.601 | 15C | CC, MO |
| 2422-2462 MHz | 0.0355 | 15C | CC, MO |
| 5190-5230 MHz | 0.219 | 15E | CC, MO |
| 5190-5230 MHz | 0.0089 | 15E | CC, MO |
| 5210 MHz | 0.076 | 15E | CC, MO |
| 5210 MHz | 0.0089 | 15E | CC, MO |
| 5250 MHz | 0.063 | 15E | CC, MO |
| 5260-5320 MHz | 0.01 | 15E | CC, MO, ND |
| 5260-5320 MHz | 0.162 | 15E | CC, MO, ND |
| 5270-5310 MHz | 0.0089 | 15E | CC, MO, ND |
| 5270-5310 MHz | 0.151 | 15E | CC, MO, ND |
| 5290 MHz | 0.0089 | 15E | CC, MO, ND |
| 5290 MHz | 0.072 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.01 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.243 | 15E | CC, MO, ND |
| 5530-5690 MHz | 0.0089 | 15E | CC, MO, ND |
| 5530-5690 MHz | 0.217 | 15E | CC, MO, ND |
| 5710 MHz | 0.0089 | 15E | CC, MO, ND |
| 5710 MHz | 0.181 | 15E | CC, MO, ND |
| 5720 MHz | 0.123 | 15E | CC, MO, ND |
| 5720 MHz | 0.01 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.01 | 15E | CC, MO |
| 5745-5825 MHz | 0.248 | 15E | CC, MO |
| 5755-5795 MHz | 0.089 | 15E | CC, MO |
| 5755-5795 MHz | 0.257 | 15E | CC, MO |
| 5775 MHz | 0.0089 | 15E | CC, MO |
| 5775 MHz | 0.176 | 15E | CC, MO |
Grants
TCB Grant - Application rModlcwQ0EpjoM3J9SBCoQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 09/20/2024 Application Dated: 09/20/2024 |
| Aegex Technologies LLC |
| Flatiron Building |
| 84 Peachtree St. NW |
| Atlanta, GA GA 30303 |
| Attention: Anne Strange , Ms. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AGVY-100MWBXX01 |
| Name of Grantee: | Aegex Technologies LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Module - AX210 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0095 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.787 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.601 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna,Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application rModlcwQ0EpjoM3J9SBCoQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Aegex Technologies LLC Flatiron Building 84 Peachtree St. NW Atlanta, GA GA 30303 United States |
Date of Grant: 09/20/2024 Application Dated: 09/20/2024 |
| Attention: Anne Strange , Ms. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AGVY-100MWBXX01 |
| Name of Grantee: | Aegex Technologies LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Module - AX210 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0095 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.787 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.601 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna,Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 09/20/2024 Application Dated: 09/20/2024 |
| Aegex Technologies LLC |
| Flatiron Building |
| 84 Peachtree St. NW |
| Atlanta, GA GA 30303 |
| Attention: Anne Strange , Ms. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AGVY-100MWBXX01 |
| Name of Grantee: | Aegex Technologies LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Module - AX210 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application qXP8z15gE128W/qUnbVQDw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Aegex Technologies LLC Flatiron Building 84 Peachtree St. NW Atlanta, GA GA 30303 United States |
Date of Grant: 09/20/2024 Application Dated: 09/20/2024 |
| Attention: Anne Strange , Ms. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AGVY-100MWBXX01 |
| Name of Grantee: | Aegex Technologies LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Module - AX210 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 09/27/2024 Application Dated: 09/27/2024 |
| Aegex Technologies LLC |
| Flatiron Building |
| 84 Peachtree St. NW |
| Atlanta, GA GA 30303 |
| Attention: Anne Strange , Ms. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AGVY-100MWBXX01 |
| Name of Grantee: | Aegex Technologies LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | 2AGVY-100MWBXX01 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.0398 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.0355 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to install the single module into a host(tablet), reduced the output power and disabled 160MHz bandwidth mode by firmware and changed the antenna to satisfy RF exposure compliance. SAR compliance for body operating conditions is limited to the specific configurations tested, as described in this filing. The highest reported Body and Simultaneous SAR values are 0.55 W/kg and 1.03W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application oGnUIBxDIyAa6DkZ8op5cg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Aegex Technologies LLC Flatiron Building 84 Peachtree St. NW Atlanta, GA GA 30303 United States |
Date of Grant: 09/27/2024 Application Dated: 09/27/2024 |
| Attention: Anne Strange , Ms. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AGVY-100MWBXX01 |
| Name of Grantee: | Aegex Technologies LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | 2AGVY-100MWBXX01 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.0398 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.0355 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to install the single module into a host(tablet), reduced the output power and disabled 160MHz bandwidth mode by firmware and changed the antenna to satisfy RF exposure compliance. SAR compliance for body operating conditions is limited to the specific configurations tested, as described in this filing. The highest reported Body and Simultaneous SAR values are 0.55 W/kg and 1.03W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 09/27/2024 Application Dated: 09/27/2024 |
| Aegex Technologies LLC |
| Flatiron Building |
| 84 Peachtree St. NW |
| Atlanta, GA GA 30303 |
| Attention: Anne Strange , Ms. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AGVY-100MWBXX01 |
| Name of Grantee: | Aegex Technologies LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2AGVY-100MWBXX01 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0122 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to install the single module into a host(tablet), reduced the output power and disabled 160MHz bandwidth mode by firmware and changed the antenna to satisfy RF exposure compliance. SAR compliance for body operating conditions is limited to the specific configurations tested, as described in this filing. The highest reported Body and Simultaneous SAR values are 0.15 W/kg and 1.03W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application K/Fs8uxYpBP8AdjKXbSBXw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Aegex Technologies LLC Flatiron Building 84 Peachtree St. NW Atlanta, GA GA 30303 United States |
Date of Grant: 09/27/2024 Application Dated: 09/27/2024 |
| Attention: Anne Strange , Ms. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AGVY-100MWBXX01 |
| Name of Grantee: | Aegex Technologies LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2AGVY-100MWBXX01 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0122 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to install the single module into a host(tablet), reduced the output power and disabled 160MHz bandwidth mode by firmware and changed the antenna to satisfy RF exposure compliance. SAR compliance for body operating conditions is limited to the specific configurations tested, as described in this filing. The highest reported Body and Simultaneous SAR values are 0.15 W/kg and 1.03W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 09/27/2024 Application Dated: 09/27/2024 |
| Aegex Technologies LLC |
| Flatiron Building |
| 84 Peachtree St. NW |
| Atlanta, GA GA 30303 |
| Attention: Anne Strange , Ms. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AGVY-100MWBXX01 |
| Name of Grantee: | Aegex Technologies LLC |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2AGVY-100MWBXX01 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.01 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.0089 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.0089 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.01 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.0089 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.0089 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.01 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.0089 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.01 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.0089 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.01 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.089 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.0089 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to install the single module into a host(tablet), reduced the output power and disabled 160MHz bandwidth mode by firmware and changed the antenna to satisfy RF exposure compliance. SAR compliance for body operating conditions is limited to the specific configurations tested, as described in this filing. The highest reported Body and Simultaneous SAR values are 0.96 W/kg and 1.03W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application FVa+8rjfobvjjC3Ta+w5NQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Aegex Technologies LLC Flatiron Building 84 Peachtree St. NW Atlanta, GA GA 30303 United States |
Date of Grant: 09/27/2024 Application Dated: 09/27/2024 |
| Attention: Anne Strange , Ms. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AGVY-100MWBXX01 |
| Name of Grantee: | Aegex Technologies LLC |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2AGVY-100MWBXX01 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.01 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.0089 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.0089 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.01 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.0089 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.0089 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.01 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.0089 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.01 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.0089 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.01 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.089 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.0089 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to install the single module into a host(tablet), reduced the output power and disabled 160MHz bandwidth mode by firmware and changed the antenna to satisfy RF exposure compliance. SAR compliance for body operating conditions is limited to the specific configurations tested, as described in this filing. The highest reported Body and Simultaneous SAR values are 0.96 W/kg and 1.03W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 09/20/2024 Application Dated: 09/20/2024 |
| Aegex Technologies LLC |
| Flatiron Building |
| 84 Peachtree St. NW |
| Atlanta, GA GA 30303 |
| Attention: Anne Strange , Ms. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AGVY-100MWBXX01 |
| Name of Grantee: | Aegex Technologies LLC |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Module - AX210 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.159 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.219 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.076 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.063 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.162 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.151 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.072 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.243 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.181 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.123 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.217 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.248 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.257 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.176 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application /qiu7NC6zg6KQsKo0MuL6g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Aegex Technologies LLC Flatiron Building 84 Peachtree St. NW Atlanta, GA GA 30303 United States |
Date of Grant: 09/20/2024 Application Dated: 09/20/2024 |
| Attention: Anne Strange , Ms. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AGVY-100MWBXX01 |
| Name of Grantee: | Aegex Technologies LLC |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Module - AX210 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.159 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.219 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.076 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.063 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.162 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.151 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.072 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.243 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.181 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.123 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.217 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.248 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.257 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.176 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |