FCC ID 2AH25T3

POS System

by Shanghai Sunmi Technology Co.,Ltd.

Grantee Code: 2AH25   Product Code: T3
Latest application date: 2025-01-10

FCC ID Device Details

FCC ID2AH25T3
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AH25
Product CodeT3
Applicant BusinessShanghai Sunmi Technology Co.,Ltd. 🇨🇳
Related Domains sunmi.com sgs.com
Equipment ClassPOS System
Test FirmSGS-CSTC Standards Technical Services (Suzhou) Co.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2025-01-10
2402-2480 MHzOriginal Equipment2025-01-10
13.56 MHzOriginal Equipment2025-01-10
2402-2480 MHzOriginal Equipment2025-01-10

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2025-01-10PDF 4.4 MB
Internal photoInternal Photos2025-01-10PDF 1.2 MB
External photoExternal Photos2025-01-10PDF 765 KB
LabelID Label/Location Info2025-01-10PDF 868 KB
Test setup photosTest Setup Photos2025-01-10PDF 602.1 KB
Test setup photosTest Setup Photos2025-01-10PDF 294.4 KB
Antenna Data SheetTest Report2025-01-10PDF 671.8 KB
Antenna data sheetTest Report2025-01-10PDF 671.8 KB
FCC 5GWIFI Test Report_part1Test Report2025-01-10PDF 4.5 MB
FCC 5GWIFI Test Report_part2Test Report2025-01-10PDF 4.7 MB
FCC 5GWIFI Test Report_part3Test Report2025-01-10PDF 3.4 MB
Test reportTest Report2025-01-10PDF 5.5 MB
Test reportTest Report2025-01-10PDF 1.3 MB
Test report for 2.4G WiFiTest Report2025-01-10PDF 4.4 MB
Test report for BLETest Report2025-01-10PDF 2.5 MB
FCC_U.S. agent LetterAttestation Statements2025-01-10PDF 185.8 KB
QSF27-14-04_Rev1.0_Applicant_Declaration_Letter.Attestation Statements2025-01-10PDF 107.2 KB
Auth letterCover Letter(s)2025-01-10PDF 17.9 KB
Confidentiality letterCover Letter(s)2025-01-10PDF 70.4 KB
MCLCover Letter(s)2025-01-10PDF 75.5 KB
MPERF Exposure Info2025-01-10PDF 271.5 KB
MPERF Exposure Info2025-01-10PDF 267.3 KB
Bolck diagram Metadata onlyBlock DiagramPDF 544.1 KB
Schematics Metadata onlySchematicsPDF 2.5 MB
Operational description Metadata onlyOperational DescriptionPDF 14.6 KB
NII Software Security Info Metadata onlySDR Software/Security Info.PDF 691.6 KB

Application Information

Application IDmspru0QV1iXygbI+lqeHUg==
Final Action Date2025-01-10
Application PurposeOriginal Equipment
Applicant FRN0025501644
ModelT3
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionPOS System
Responsible PartyFang Lu, Certification Manager, fang.lu@sunmi.com , +8618501703215
AgentParlam Parlam Parlam, SGS-CSTC Standards Technical Services Co., Ltd., Parlam.zhan@sgs.com , 02161915666
Technical ContactParlam Zhan, SGS-CSTC Standards Technical Services Co., Ltd., Parlam.zhan@sgs.com , 02161915666
Non-Technical ContactParlam Zhan, SGS-CSTC Standards Technical Services Co., Ltd., Parlam.zhan@sgs.com , 02161915666
Test FirmCloud Peng, SGS-CSTC Standards Technical Services (Suzhou) Co., Cloud.Peng@sgs.com , +86 18550061259
TCB EmailUSCTS.TCB@SGS.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20MHz, 40MHz and 80MHz bandwidth mode.

Applications

Application IDDatePurpose
mspru0QV1iXygbI+lqeHUg==2025-01-10Original Equipment
gmRzs+2NsTBUSJl0D0ScfQ==2025-01-10Original Equipment
S+6L2PVP0FoHK4it9P4qsw==2025-01-10Original Equipment
BPL1DSnJlJNmWpQG1fWmKA==2025-01-10Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
13.56 MHz15CCC
2402-2480 MHz0.010000015CCC
2402-2480 MHz0.00515CCC
2412-2462 MHz0.09315CCC
2422-2452 MHz0.10415CCC
5190-5230 MHz0.02315ECC
5210 MHz0.01815ECC
5260-5320 MHz0.02815ECC
5270-5310 MHz0.02215ECC
5290 MHz0.01715ECC
5500-5720 MHz0.03115ECC
5510-5710 MHz0.02515ECC
5530-5690 MHz0.01115ECC
5745-5825 MHz0.00815ECC
5755-5795 MHz0.00815ECC
5775 MHz0.00815ECC

Grants

TCB Grant - Application S+6L2PVP0FoHK4it9P4qsw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 01/10/2025

Application Dated: 01/10/2025
Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road,
Yang Pu District, Shanghai, China
Shanghai, 200433
China
 
Attention: Fang Lu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T3
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 13.56  -  13.56  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application S+6L2PVP0FoHK4it9P4qsw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road, Yang Pu District, Shanghai, China
Shanghai, 200433
China
  Date of Grant: 01/10/2025

Application Dated: 01/10/2025
 
Attention: Fang Lu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T3
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 13.56  -  13.56  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application mspru0QV1iXygbI+lqeHUg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 01/10/2025

Application Dated: 01/10/2025
Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road,
Yang Pu District, Shanghai, China
Shanghai, 200433
China
 
Attention: Fang Lu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T3
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.029  
CC 15E 5190.0  -  5230.0 0.023  
CC 15E 5210.0  -  5210.0 0.018  
CC 15E 5260.0  -  5320.0 0.028  
CC 15E 5270.0  -  5310.0 0.022  
CC 15E 5290.0  -  5290.0 0.017  
CC 15E 5500.0  -  5720.0 0.031  
CC 15E 5510.0  -  5710.0 0.025  
CC 15E 5530.0  -  5690.0 0.011  
CC 15E 5745.0  -  5825.0 0.008  
CC 15E 5755.0  -  5795.0 0.008  
CC 15E 5775.0  -  5775.0 0.008  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20MHz, 40MHz and 80MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application mspru0QV1iXygbI+lqeHUg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road, Yang Pu District, Shanghai, China
Shanghai, 200433
China
  Date of Grant: 01/10/2025

Application Dated: 01/10/2025
 
Attention: Fang Lu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T3
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.029  
CC 15E 5190.0  -  5230.0 0.023  
CC 15E 5210.0  -  5210.0 0.018  
CC 15E 5260.0  -  5320.0 0.028  
CC 15E 5270.0  -  5310.0 0.022  
CC 15E 5290.0  -  5290.0 0.017  
CC 15E 5500.0  -  5720.0 0.031  
CC 15E 5510.0  -  5710.0 0.025  
CC 15E 5530.0  -  5690.0 0.011  
CC 15E 5745.0  -  5825.0 0.008  
CC 15E 5755.0  -  5795.0 0.008  
CC 15E 5775.0  -  5775.0 0.008  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20MHz, 40MHz and 80MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application gmRzs+2NsTBUSJl0D0ScfQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 01/10/2025

Application Dated: 01/10/2025
Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road,
Yang Pu District, Shanghai, China
Shanghai, 200433
China
 
Attention: Fang Lu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T3
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.005  
CC 15C 2412.0  -  2462.0 0.093  
CC 15C 2422.0  -  2452.0 0.104  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application gmRzs+2NsTBUSJl0D0ScfQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road, Yang Pu District, Shanghai, China
Shanghai, 200433
China
  Date of Grant: 01/10/2025

Application Dated: 01/10/2025
 
Attention: Fang Lu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T3
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.005  
CC 15C 2412.0  -  2462.0 0.093  
CC 15C 2422.0  -  2452.0 0.104  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application BPL1DSnJlJNmWpQG1fWmKA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 01/10/2025

Application Dated: 01/10/2025
Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road,
Yang Pu District, Shanghai, China
Shanghai, 200433
China
 
Attention: Fang Lu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T3
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application BPL1DSnJlJNmWpQG1fWmKA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road, Yang Pu District, Shanghai, China
Shanghai, 200433
China
  Date of Grant: 01/10/2025

Application Dated: 01/10/2025
 
Attention: Fang Lu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T3
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: