1. FCC ID
  2. 2AH25
  3. 2AH25T6F10NA

FCC ID 2AH25T6F10NA

Smart POS System

by Shanghai Sunmi Technology Co.,Ltd.

Grantee Code: 2AH25   Product Code: T6F10NA
Latest application date: 2026-08-19

FCC ID Device Details

FCC ID2AH25T6F10NA
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AH25
Product CodeT6F10NA
Applicant BusinessShanghai Sunmi Technology Co.,Ltd. 🇨🇳
Related Domains sunmi.com
Equipment ClassSmart POS System
Test FirmSGS-CSTC Standards Technical Services (Suzhou) Co.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2026-08-19
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2026-08-19
2580-2610 MHzClass II permissive change or modification of presently authorized equipment2026-08-19
5745-5825 MHzClass II permissive change or modification of presently authorized equipment2026-08-19
13.56 MHzClass II permissive change or modification of presently authorized equipment2026-08-19
13.56 MHzOriginal Equipment2024-09-13
5180-5240 MHzOriginal Equipment2024-09-13
670.5-690.5 MHzOriginal Equipment2024-09-13
2402-2480 MHzOriginal Equipment2024-09-13
2402-2480 MHzOriginal Equipment2024-09-13

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2026-08-19PDF 4.4 MB
User manualUsers Manual2025-03-09PDF 5.2 MB
user_manualUsers Manual2025-03-09PDF 5.2 MB
Internal PhotoInternal Photos2026-08-19PDF 4.1 MB
Internal photoInternal Photos2026-08-19PDF 4.1 MB
internal_photosInternal Photos2025-03-09PDF 3.3 MB
External PhotoExternal Photos2026-08-19PDF 1.8 MB
External photoExternal Photos2026-08-19PDF 1.8 MB
External photosExternal Photos2025-03-09PDF 3.1 MB
LabelID Label/Location Info2026-08-19PDF 688.8 KB
label_and_locationID Label/Location Info2024-09-13PDF 898.6 KB
Test setup photoTest Setup Photos2026-08-19PDF 693.9 KB
Test setup photoTest Setup Photos2026-08-19PDF 1.2 MB
set_up_photosTest Setup Photos2025-03-09PDF 632.6 KB
set_up_photos Metadata onlyTest Setup Photos2025-03-09PDF 788.6 KB
set_up_photos.15BTest Setup Photos2025-03-09PDF 980.6 KB
set_up_photos.15CTest Setup Photos2025-03-09PDF 988.5 KB
set_up_photos.DFSTest Setup Photos2025-03-09PDF 1.3 MB
set_up_photos.NFCTest Setup Photos2025-03-09PDF 415.6 KB
set_up_photos.SARTest Setup Photos2025-03-09PDF 427.1 KB
set_up_photos.sarTest Setup Photos2025-03-09PDF 427.1 KB
Antenna Data SheetTest Report2026-08-19PDF 773.9 KB
Antenna data sheetTest Report2026-08-19PDF 773.9 KB
Appendix B.1 RSE for WCDMATest Report2026-08-19PDF 368.4 KB
Appendix B.2 RSE for LTETest Report2026-08-19PDF 372.2 KB
FCC 2.4GWIFI Test ReportTest Report2026-08-19PDF 2.9 MB
FCC 5GWIFI Test ReportTest Report2026-08-19PDF 1.7 MB
FCC BLE Test ReportTest Report2026-08-19PDF 2.2 MB
FCC BT Test ReportTest Report2026-08-19PDF 1.7 MB
FCC NFC Test ReportTest Report2026-08-19PDF 1.8 MB
FCC Part 15B Test ReportTest Report2026-08-19PDF 930.1 KB
FCC RF Test ReportTest Report2026-08-19PDF 1.5 MB
antenna_infoTest Report2024-09-13PDF 665.8 KB
test_reportTest Report2024-09-13PDF 1.4 MB
test_report_(dfs)Test Report2024-09-13PDF 1.3 MB
test_report_(sar).part1 Metadata onlyTest Report2024-09-13PDF 2.1 MB
test_report_(sar).part2 Metadata onlyTest Report2024-09-13PDF 2.9 MB
test_report_(sar).part3 Metadata onlyTest Report2024-09-13PDF 5.3 MB
test_report_(sar).part4 Metadata onlyTest Report2024-09-13PDF 5.4 MB
test_report_(sar).part5 Metadata onlyTest Report2024-09-13PDF 5 MB
test_reports_15BTest Report2024-09-13PDF 1.3 MB
test_reports_BLETest Report2024-09-13PDF 3 MB
test_reports_BTTest Report2024-09-13PDF 4.2 MB
test_reports_LTE1 part1Test Report2024-09-13PDF 5.2 MB
test_reports_LTE1 part2Test Report2024-09-13PDF 1.7 MB
test_reports_LTE2 part1Test Report2024-09-13PDF 1.7 MB
test_reports_LTE2 part2Test Report2024-09-13PDF 3.8 MB
test_reports_LTE2 part3Test Report2024-09-13PDF 4.8 MB
test_reports_LTE2 part4Test Report2024-09-13PDF 4.3 MB
test_reports_LTE2 part5Test Report2024-09-13PDF 5.1 MB
test_reports_LTE2 part6Test Report2024-09-13PDF 5.1 MB
test_reports_LTE2 part7Test Report2024-09-13PDF 5.1 MB
test_reports_LTE2 part8Test Report2024-09-13PDF 2.1 MB
test_reports_RLAN 5.8GTest Report2024-09-13PDF 4.4 MB
test_reports_RLAN part1Test Report2024-09-13PDF 4.1 MB
test_reports_RLAN part2Test Report2024-09-13PDF 4.9 MB
test_reports_RLAN part3Test Report2024-09-13PDF 2 MB
test_reports_WCDMATest Report2024-09-13PDF 2.7 MB
test_reports_WLANTest Report2024-09-13PDF 5 MB
FCC CoverList AttestationAttestation Statements2026-08-19PDF 210.9 KB
FCC U.S. agent LetterAttestation Statements2026-08-19PDF 165.9 KB
QSF27-14-04_Rev1.4_Applicant_Declaration_LetterAttestation Statements2026-08-19PDF 269.5 KB
fcc_2911(d)(5)_attestation_letterAttestation Statements2024-09-13PDF 95.9 KB
us_agent_attestation_letterAttestation Statements2024-09-13PDF 290.9 KB
Auth LetterCover Letter(s)2026-08-19PDF 99.9 KB
Auth letterCover Letter(s)2026-08-19PDF 99.9 KB
Confidentiality LetterCover Letter(s)2026-08-19PDF 126.6 KB
FCC_Class II Permissive Change RequestCover Letter(s)2026-08-19PDF 150.2 KB
FCC cover_lettersCover Letter(s)2024-09-13PDF 63.4 KB
fcc_request_long_confidentialityCover Letter(s)2024-09-13PDF 52.2 KB
fcc_request_short_confidentialityCover Letter(s)2024-09-13PDF 112.1 KB
Appendix A Detailed System Check ResultsRF Exposure Info2026-08-19PDF 1,021.2 KB
Appendix B Detailed Test ResultsRF Exposure Info2026-08-19PDF 3.5 MB
Appendix C Calibration certificateRF Exposure Info2026-08-19PDF 4.4 MB
Appendix D PhotographsRF Exposure Info2026-08-19PDF 717.6 KB
FCC SAR ReportRF Exposure Info2026-08-19PDF 2.4 MB
test_report_(sar).part1RF Exposure Info2024-09-13PDF 2.1 MB
test_report_(sar).part2RF Exposure Info2024-09-13PDF 2.9 MB
test_report_(sar).part3RF Exposure Info2024-09-13PDF 5.3 MB
test_report_(sar).part4RF Exposure Info2024-09-13PDF 5.4 MB
test_report_(sar).part5RF Exposure Info2024-09-13PDF 5 MB
block diagram Metadata onlyBlock DiagramPDF 224.3 KB
frequency_block_diagram Metadata onlyBlock DiagramPDF 224.3 KB
Schematics Metadata onlySchematicsPDF 875.9 KB
schematics Metadata onlySchematicsPDF 2.8 MB
schematics_PCB layout Metadata onlySchematicsPDF 2.5 MB
schematics_PCB layout1 Metadata onlySchematicsPDF 2 MB
schematics_PCB layout2 Metadata onlySchematicsPDF 2.5 MB
schematics_PCB layout2 Metadata onlySchematicsPDF
schematics_PCB placement Metadata onlySchematicsPDF 3.2 MB
operational_description Metadata onlyOperational DescriptionPDF 113.9 KB
FCC DTS-NII declaration letter Metadata onlySDR Software/Security Info.PDF 159.3 KB
FCC Software Security Info Metadata onlySDR Software/Security Info.PDF 183.3 KB
tune_up_procedure Metadata onlySDR Software/Security Info.PDF 119 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 115.6 KB
bill_of_materials Metadata onlyParts List/Tune Up InfoPDF 355.1 KB
tune_up_procedure Metadata onlyParts List/Tune Up InfoPDF 119 KB

Application Information

Application IDyI8BE2ywIme84jftG7mvog==
Final Action Date2026-08-19
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0025501644
ModelT6F10NA
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionSmart POS System
Responsible PartyMinfei Chen, minfei.chen@sunmi.com , +862161079307
Technical ContactParlam Zhan, SGS-CSTC Standards Technical Services Co., Ltd., Parlam.zhan@sgs.com , 02161915666
Non-Technical ContactHui Guo, Sunmi Technology US Inc., Hui.guo@sunmi.com , +1-6269404939
Test FirmMia Zhou, SGS-CSTC Standards Technical Services (Suzhou) Co., Mia.Zhou@sgs.com , 86-18550061259
TCB EmailUSCTS.TCB@SGS.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Modular EquipmentDoes not apply
Composite DeviceYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
yI8BE2ywIme84jftG7mvog==2026-08-19Class II permissive change or modification of presently authorized equipment
uzFnYzNeaiCUmBLhuS12lQ==2026-08-19Class II permissive change or modification of presently authorized equipment
E0jBKt//n04z4vQm4T0i/Q==2026-08-19Class II permissive change or modification of presently authorized equipment
AmvOec1pxpafXlFqZ2NZuQ==2026-08-19Class II permissive change or modification of presently authorized equipment
6+X7IfQXpEybwfijZDym0Q==2026-08-19Class II permissive change or modification of presently authorized equipment
1HKqEWZD8jPK9rhEDWAXgw==2026-08-19Class II permissive change or modification of presently authorized equipment
lSRrvHhNjXtW8qbSScFLPg==2024-09-13Original Equipment
j9eAXeGFg4B+kbsuxcgdAQ==2024-09-13Original Equipment
QeQ/hVKuqqT4VPJ/UtdcHw==2024-09-13Original Equipment
MZVPIQ7D+tqamH4iIO49zA==2024-09-13Original Equipment
MAcemb2kTED1K1NtrfFKKw==2024-09-13Original Equipment
BpK8lRwshX/GH+KfCWYrbw==2024-09-13Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
13.56 MHz15C
670.5-690.5 MHz0.09842.5ppm13M5W7D27
673-688 MHz0.09642.5ppm17M9W7D27
704-711 MHz0.09312.5ppm8M96G7D27
704-711 MHz0.07482.5ppm8M97W7D27
706.5-713.5 MHz0.11992.5ppm4M48W7D27
709-711 MHz0.11942.5ppm8M95W7D27
709-711 MHz0.15212.5ppm8M95G7D27
779.5-784.5 MHz0.04892.5ppm4M48W7D27
782 MHz0.06012.5ppm8M92G7D27
782 MHz0.04792.5ppm8M93W7D27
790.5-795.5 MHz0.05532.5ppm4M49W7D9
793 MHz0.07052.5ppm8M93G7D9
793 MHz0.05422.5ppm8M95W7D9
814.7-823.3 MHz0.15422.5ppm1M08W7D9
816.5-821.5 MHz0.19142.5ppm4M49G7D9
819 MHz0.18972.5ppm8M94G7D9
819 MHz0.15382.5ppm8M95W7D9
831.5-841.5 MHz0.09462.5ppm13M4G7D22H
831.5-841.5 MHz0.0752.5ppm13M4W7D22H
1710.7-1779.3 MHz0.15922.5ppm1M08W7D27
1717.5-1747.5 MHz0.15282.5ppm13M4W7D27
1720-1745 MHz0.1952.5ppm17M9G7D27
1720-1745 MHz0.15142.5ppm17M9W7D27
1720-1770 MHz0.20092.5ppm17M9G7D27
1720-1770 MHz0.15562.5ppm17M9W7D27
1851.5-1908.5 MHz0.14352.5ppm2M68W7D24E
1857.5-1907.5 MHz0.13612.5ppm13M4W7D24E
1860-1900 MHz0.17462.5ppm17M9G7D24E
1860-1900 MHz0.14262.5ppm17M9W7D24E
1860-1905 MHz0.17862.5ppm17M9G7D24E
1860-1905 MHz0.13552.5ppm17M9W7D24E
2310 MHz0.18112.5ppm8M94G7D27
2310 MHz0.14592.5ppm8M95W7D27
2402-2480 MHz0.007600015C
2402-2480 MHz0.000615C
2412-2462 MHz0.048315C
2501-2685 MHz0.15632.5ppm8M99W7D27
2505-2565 MHz0.11192.5ppm8M95W7D27
2506-2680 MHz0.21092.5ppm17M9G7D27
2506-2680 MHz0.1562.5ppm17M9W7D27
2510-2560 MHz0.14192.5ppm17M9G7D27
2510-2560 MHz0.11122.5ppm17M9W7D27
2577.5-2612.5 MHz0.12652.5ppm13M4W7D27
2580-2610 MHz0.16032.5ppm17M9G7D27
2580-2610 MHz0.12622.5ppm17M8W7D27
5180-5240 MHz0.0115E
5260-5320 MHz0.009115E

Grants

TCB Grant - Application yI8BE2ywIme84jftG7mvog==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 08/19/2026

Application Dated: 08/19/2026
Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road,
Yang Pu District, Shanghai, China
Shanghai, 200433
China
 
Attention: Minfei Chen , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T6F10NA
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: Smart POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0006  
CC 15C 2412.0  -  2462.0 0.0483  

RF output power is conducted. Device supports 20 and 40 MHz BW modes. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported standalone 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.37 W/kg and 1.29 W/kg respectively. The highest reported simultaneous 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.55 W/kg and 1.59 W/kg respectively.

C2PC to add a small screen and camera, and secondary battery.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application uzFnYzNeaiCUmBLhuS12lQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 08/19/2026

Application Dated: 08/19/2026
Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road,
Yang Pu District, Shanghai, China
Shanghai, 200433
China
 
Attention: Minfei Chen , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T6F10NA
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Smart POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0076  

RF output power is peak conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported standalone 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.37 W/kg and 1.29 W/kg respectively. The highest reported simultaneous 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.55 W/kg and 1.59 W/kg respectively.

C2PC to add a small screen and camera, and secondary battery.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application QeQ/hVKuqqT4VPJ/UtdcHw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Warwick Ltd
Unit 1 Pendle Place
Skelmersdale, WN8 9PN
United Kingdom 		Date of Grant: 09/13/2024

Application Dated: 09/12/2024
Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road,
Yang Pu District, Shanghai, China
Shanghai, 200433
China
 
Attention: Fang Lu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T6F10NA
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: PCS Licensed Transmitter worn on body
Notes: Smart POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 826.4  -  846.6 0.1117 2.5  PM 4M17F9W
27 1712.4  -  1752.6 0.2366 2.5  PM 4M17F9W
24E 1852.4  -  1907.6 0.1982 2.5  PM 4M17F9W
27 673.0  -  688.0 0.1233 2.5  PM 17M9G7D
27 670.5  -  690.5 0.0984 2.5  PM 13M5W7D
27 673.0  -  688.0 0.0964 2.5  PM 17M9W7D
27 704.0  -  711.0 0.0931 2.5  PM 8M96G7D
27 704.0  -  711.0 0.0748 2.5  PM 8M97W7D
27 709.0  -  711.0 0.1521 2.5  PM 8M95G7D
27 706.5  -  713.5 0.1199 2.5  PM 4M48W7D
27 709.0  -  711.0 0.1194 2.5  PM 8M95W7D
27 782.0  -  782.0 0.0601 2.5  PM 8M92G7D
27 779.5  -  784.5 0.0489 2.5  PM 4M48W7D
27 782.0  -  782.0 0.0479 2.5  PM 8M93W7D
90 793.0  -  793.0 0.0705 2.5  PM 8M93G7D
90 790.5  -  795.5 0.0553 2.5  PM 4M49W7D
90 793.0  -  793.0 0.0542 2.5  PM 8M95W7D
90 816.5  -  821.5 0.1914 2.5  PM 4M49G7D
90 819.0  -  819.0 0.1897 2.5  PM 8M94G7D
90 814.7  -  823.3 0.1542 2.5  PM 1M08W7D
90 819.0  -  819.0 0.1538 2.5  PM 8M95W7D
22H 831.5  -  841.5 0.0946 2.5  PM 13M4G7D
22H 831.5  -  841.5 0.075 2.5  PM 13M4W7D
27 1720.0  -  1745.0 0.195 2.5  PM 17M9G7D
27 1717.5  -  1747.5 0.1528 2.5  PM 13M4W7D
27 1720.0  -  1745.0 0.1514 2.5  PM 17M9W7D
27 1720.0  -  1770.0 0.2009 2.5  PM 17M9G7D
27 1710.7  -  1779.3 0.1592 2.5  PM 1M08W7D
27 1720.0  -  1770.0 0.1556 2.5  PM 17M9W7D
24E 1860.0  -  1900.0 0.1746 2.5  PM 17M9G7D
24E 1851.5  -  1908.5 0.1435 2.5  PM 2M68W7D
24E 1860.0  -  1900.0 0.1426 2.5  PM 17M9W7D
24E 1860.0  -  1905.0 0.1786 2.5  PM 17M9G7D
24E 1857.5  -  1907.5 0.1361 2.5  PM 13M4W7D
24E 1860.0  -  1905.0 0.1355 2.5  PM 17M9W7D
27 2310.0  -  2310.0 0.1811 2.5  PM 8M94G7D
27 2310.0  -  2310.0 0.1459 2.5  PM 8M95W7D
27 2510.0  -  2560.0 0.1419 2.5  PM 17M9G7D
27 2505.0  -  2565.0 0.1119 2.5  PM 8M95W7D
27 2510.0  -  2560.0 0.1112 2.5  PM 17M9W7D
27 2580.0  -  2610.0 0.1603 2.5  PM 17M9G7D
27 2577.5  -  2612.5 0.1265 2.5  PM 13M4W7D
27 2580.0  -  2610.0 0.1262 2.5  PM 17M8W7D
27 2506.0  -  2680.0 0.2109 2.5  PM 17M9G7D
27 2501.0  -  2685.0 0.1563 2.5  PM 8M99W7D
27 2506.0  -  2680.0 0.156 2.5  PM 17M9W7D

Output power listed is ERP for operation below 1 GHz, EIRP for operation above 1 GHz, and conducted power for Part 90S (814-824 MHz).

LTE supports 1.4/3/5/10/15/20 MHz BW modes in Band 2/4/25/66, 1.4/3/5/10 MHz BW modes in Band 5/12, 5/10/15/20 MHz BW modes in Band 7/38/41/71, 1.4/3/5/10/15 MHz BW modes in Band 26, and 5/10 MHz BW modes in Band 13/14/17/30.

The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported standalone 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.37 W/kg and 1.29 W/kg respectively. The highest reported simultaneous 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.55 W/kg and 1.59 W/kg respectively.

This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations.


EAS Grant - Application QeQ/hVKuqqT4VPJ/UtdcHw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road, Yang Pu District, Shanghai, China
Shanghai, 200433
China 		  Date of Grant: 09/13/2024

Application Dated: 09/12/2024
 
Attention: Fang Lu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T6F10NA
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: PCS Licensed Transmitter worn on body
Notes: Smart POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 826.4  -  846.6 0.1117 2.5  PM 4M17F9W
27 1712.4  -  1752.6 0.2366 2.5  PM 4M17F9W
24E 1852.4  -  1907.6 0.1982 2.5  PM 4M17F9W
27 673.0  -  688.0 0.1233 2.5  PM 17M9G7D
27 670.5  -  690.5 0.0984 2.5  PM 13M5W7D
27 673.0  -  688.0 0.0964 2.5  PM 17M9W7D
27 704.0  -  711.0 0.0931 2.5  PM 8M96G7D
27 704.0  -  711.0 0.0748 2.5  PM 8M97W7D
27 709.0  -  711.0 0.1521 2.5  PM 8M95G7D
27 706.5  -  713.5 0.1199 2.5  PM 4M48W7D
27 709.0  -  711.0 0.1194 2.5  PM 8M95W7D
27 782.0  -  782.0 0.0601 2.5  PM 8M92G7D
27 779.5  -  784.5 0.0489 2.5  PM 4M48W7D
27 782.0  -  782.0 0.0479 2.5  PM 8M93W7D
90 793.0  -  793.0 0.0705 2.5  PM 8M93G7D
90 790.5  -  795.5 0.0553 2.5  PM 4M49W7D
90 793.0  -  793.0 0.0542 2.5  PM 8M95W7D
90 816.5  -  821.5 0.1914 2.5  PM 4M49G7D
90 819.0  -  819.0 0.1897 2.5  PM 8M94G7D
90 814.7  -  823.3 0.1542 2.5  PM 1M08W7D
90 819.0  -  819.0 0.1538 2.5  PM 8M95W7D
22H 831.5  -  841.5 0.0946 2.5  PM 13M4G7D
22H 831.5  -  841.5 0.075 2.5  PM 13M4W7D
27 1720.0  -  1745.0 0.195 2.5  PM 17M9G7D
27 1717.5  -  1747.5 0.1528 2.5  PM 13M4W7D
27 1720.0  -  1745.0 0.1514 2.5  PM 17M9W7D
27 1720.0  -  1770.0 0.2009 2.5  PM 17M9G7D
27 1710.7  -  1779.3 0.1592 2.5  PM 1M08W7D
27 1720.0  -  1770.0 0.1556 2.5  PM 17M9W7D
24E 1860.0  -  1900.0 0.1746 2.5  PM 17M9G7D
24E 1851.5  -  1908.5 0.1435 2.5  PM 2M68W7D
24E 1860.0  -  1900.0 0.1426 2.5  PM 17M9W7D
24E 1860.0  -  1905.0 0.1786 2.5  PM 17M9G7D
24E 1857.5  -  1907.5 0.1361 2.5  PM 13M4W7D
24E 1860.0  -  1905.0 0.1355 2.5  PM 17M9W7D
27 2310.0  -  2310.0 0.1811 2.5  PM 8M94G7D
27 2310.0  -  2310.0 0.1459 2.5  PM 8M95W7D
27 2510.0  -  2560.0 0.1419 2.5  PM 17M9G7D
27 2505.0  -  2565.0 0.1119 2.5  PM 8M95W7D
27 2510.0  -  2560.0 0.1112 2.5  PM 17M9W7D
27 2580.0  -  2610.0 0.1603 2.5  PM 17M9G7D
27 2577.5  -  2612.5 0.1265 2.5  PM 13M4W7D
27 2580.0  -  2610.0 0.1262 2.5  PM 17M8W7D
27 2506.0  -  2680.0 0.2109 2.5  PM 17M9G7D
27 2501.0  -  2685.0 0.1563 2.5  PM 8M99W7D
27 2506.0  -  2680.0 0.156 2.5  PM 17M9W7D

Output power listed is ERP for operation below 1 GHz, EIRP for operation above 1 GHz, and conducted power for Part 90S (814-824 MHz).

LTE supports 1.4/3/5/10/15/20 MHz BW modes in Band 2/4/25/66, 1.4/3/5/10 MHz BW modes in Band 5/12, 5/10/15/20 MHz BW modes in Band 7/38/41/71, 1.4/3/5/10/15 MHz BW modes in Band 26, and 5/10 MHz BW modes in Band 13/14/17/30.

The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported standalone 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.37 W/kg and 1.29 W/kg respectively. The highest reported simultaneous 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.55 W/kg and 1.59 W/kg respectively.

This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations.



TCB Grant - Application MZVPIQ7D+tqamH4iIO49zA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Warwick Ltd
Unit 1 Pendle Place
Skelmersdale, WN8 9PN
United Kingdom 		Date of Grant: 09/13/2024

Application Dated: 09/12/2024
Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road,
Yang Pu District, Shanghai, China
Shanghai, 200433
China
 
Attention: Fang Lu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T6F10NA
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Smart POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15B  - 


EAS Grant - Application MZVPIQ7D+tqamH4iIO49zA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road, Yang Pu District, Shanghai, China
Shanghai, 200433
China 		  Date of Grant: 09/13/2024

Application Dated: 09/12/2024
 
Attention: Fang Lu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T6F10NA
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Smart POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15B  - 



TCB Grant - Application MAcemb2kTED1K1NtrfFKKw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Warwick Ltd
Unit 1 Pendle Place
Skelmersdale, WN8 9PN
United Kingdom 		Date of Grant: 09/13/2024

Application Dated: 09/12/2024
Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road,
Yang Pu District, Shanghai, China
Shanghai, 200433
China
 
Attention: Fang Lu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T6F10NA
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: Smart POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.0006  
15C 2412.0  -  2462.0 0.0483  

RF output power is conducted. Device supports 20 and 40 MHz BW modes. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported standalone 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.37 W/kg and 1.29 W/kg respectively. The highest reported simultaneous 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.55 W/kg and 1.59 W/kg respectively.

EAS Grant - Application MAcemb2kTED1K1NtrfFKKw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road, Yang Pu District, Shanghai, China
Shanghai, 200433
China 		  Date of Grant: 09/13/2024

Application Dated: 09/12/2024
 
Attention: Fang Lu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T6F10NA
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: Smart POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.0006  
15C 2412.0  -  2462.0 0.0483  

RF output power is conducted. Device supports 20 and 40 MHz BW modes. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported standalone 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.37 W/kg and 1.29 W/kg respectively. The highest reported simultaneous 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.55 W/kg and 1.59 W/kg respectively.



TCB Grant - Application lSRrvHhNjXtW8qbSScFLPg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Warwick Ltd
Unit 1 Pendle Place
Skelmersdale, WN8 9PN
United Kingdom 		Date of Grant: 09/13/2024

Application Dated: 09/12/2024
Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road,
Yang Pu District, Shanghai, China
Shanghai, 200433
China
 
Attention: Fang Lu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T6F10NA
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Smart POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 13.56  -  13.56  


EAS Grant - Application lSRrvHhNjXtW8qbSScFLPg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road, Yang Pu District, Shanghai, China
Shanghai, 200433
China 		  Date of Grant: 09/13/2024

Application Dated: 09/12/2024
 
Attention: Fang Lu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T6F10NA
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Smart POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 13.56  -  13.56  



TCB Grant - Application j9eAXeGFg4B+kbsuxcgdAQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Warwick Ltd
Unit 1 Pendle Place
Skelmersdale, WN8 9PN
United Kingdom 		Date of Grant: 09/13/2024

Application Dated: 09/12/2024
Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road,
Yang Pu District, Shanghai, China
Shanghai, 200433
China
 
Attention: Fang Lu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T6F10NA
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Smart POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15E 5180.0  -  5240.0 0.01  
15E 5260.0  -  5320.0 0.0091  
15E 5500.0  -  5700.0 0.0116  
15E 5745.0  -  5825.0 0.0174  

RF output power is conducted. Device supports 20, 40 and 80 MHz BW modes. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported standalone 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.37 W/kg and 1.29 W/kg respectively. The highest reported simultaneous 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.55 W/kg and 1.59 W/kg respectively.

ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).


EAS Grant - Application j9eAXeGFg4B+kbsuxcgdAQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road, Yang Pu District, Shanghai, China
Shanghai, 200433
China 		  Date of Grant: 09/13/2024

Application Dated: 09/12/2024
 
Attention: Fang Lu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T6F10NA
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Smart POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15E 5180.0  -  5240.0 0.01  
15E 5260.0  -  5320.0 0.0091  
15E 5500.0  -  5700.0 0.0116  
15E 5745.0  -  5825.0 0.0174  

RF output power is conducted. Device supports 20, 40 and 80 MHz BW modes. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported standalone 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.37 W/kg and 1.29 W/kg respectively. The highest reported simultaneous 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.55 W/kg and 1.59 W/kg respectively.

ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).



TCB Grant - Application E0jBKt//n04z4vQm4T0i/Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 08/19/2026

Application Dated: 08/19/2026
Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road,
Yang Pu District, Shanghai, China
Shanghai, 200433
China
 
Attention: Minfei Chen , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T6F10NA
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: PCS Licensed Transmitter worn on body
Notes: Smart POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 826.4  -  846.6 0.1117 2.5  PM 4M17F9W
27 1712.4  -  1752.6 0.2366 2.5  PM 4M17F9W
24E 1852.4  -  1907.6 0.1982 2.5  PM 4M17F9W
27 673.0  -  688.0 0.1233 2.5  PM 17M9G7D
27 670.5  -  690.5 0.0984 2.5  PM 13M5W7D
27 673.0  -  688.0 0.0964 2.5  PM 17M9W7D
27 704.0  -  711.0 0.0931 2.5  PM 8M96G7D
27 704.0  -  711.0 0.0748 2.5  PM 8M97W7D
27 709.0  -  711.0 0.1521 2.5  PM 8M95G7D
27 706.5  -  713.5 0.1199 2.5  PM 4M48W7D
27 709.0  -  711.0 0.1194 2.5  PM 8M95W7D
27 782.0  -  782.0 0.0601 2.5  PM 8M92G7D
27 779.5  -  784.5 0.0489 2.5  PM 4M48W7D
27 782.0  -  782.0 0.0479 2.5  PM 8M93W7D
90 793.0  -  793.0 0.0705 2.5  PM 8M93G7D
90 790.5  -  795.5 0.0553 2.5  PM 4M49W7D
90 793.0  -  793.0 0.0542 2.5  PM 8M95W7D
90 816.5  -  821.5 0.1914 2.5  PM 4M49G7D
90 819.0  -  819.0 0.1897 2.5  PM 8M94G7D
90 814.7  -  823.3 0.1542 2.5  PM 1M08W7D
90 819.0  -  819.0 0.1538 2.5  PM 8M95W7D
22H 831.5  -  841.5 0.0946 2.5  PM 13M4G7D
22H 831.5  -  841.5 0.075 2.5  PM 13M4W7D
27 1720.0  -  1745.0 0.195 2.5  PM 17M9G7D
27 1717.5  -  1747.5 0.1528 2.5  PM 13M4W7D
27 1720.0  -  1745.0 0.1514 2.5  PM 17M9W7D
27 1720.0  -  1770.0 0.2009 2.5  PM 17M9G7D
27 1710.7  -  1779.3 0.1592 2.5  PM 1M08W7D
27 1720.0  -  1770.0 0.1556 2.5  PM 17M9W7D
24E 1860.0  -  1900.0 0.1746 2.5  PM 17M9G7D
24E 1851.5  -  1908.5 0.1435 2.5  PM 2M68W7D
24E 1860.0  -  1900.0 0.1426 2.5  PM 17M9W7D
24E 1860.0  -  1905.0 0.1786 2.5  PM 17M9G7D
24E 1857.5  -  1907.5 0.1361 2.5  PM 13M4W7D
24E 1860.0  -  1905.0 0.1355 2.5  PM 17M9W7D
27 2310.0  -  2310.0 0.1811 2.5  PM 8M94G7D
27 2310.0  -  2310.0 0.1459 2.5  PM 8M95W7D
27 2510.0  -  2560.0 0.1419 2.5  PM 17M9G7D
27 2505.0  -  2565.0 0.1119 2.5  PM 8M95W7D
27 2510.0  -  2560.0 0.1112 2.5  PM 17M9W7D
27 2580.0  -  2610.0 0.1603 2.5  PM 17M9G7D
27 2577.5  -  2612.5 0.1265 2.5  PM 13M4W7D
27 2580.0  -  2610.0 0.1262 2.5  PM 17M8W7D
27 2506.0  -  2680.0 0.2109 2.5  PM 17M9G7D
27 2501.0  -  2685.0 0.1563 2.5  PM 8M99W7D
27 2506.0  -  2680.0 0.156 2.5  PM 17M9W7D

Output power listed is ERP for operation below 1 GHz, EIRP for operation above 1 GHz, and conducted power for Part 90S (814-824 MHz).

LTE supports 1.4/3/5/10/15/20 MHz BW modes in Band 2/4/25/66, 1.4/3/5/10 MHz BW modes in Band 5/12, 5/10/15/20 MHz BW modes in Band 7/38/41/71, 1.4/3/5/10/15 MHz BW modes in Band 26, and 5/10 MHz BW modes in Band 13/14/17/30.

The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported standalone 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.37 W/kg and 1.29 W/kg respectively. The highest reported simultaneous 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.55 W/kg and 1.59 W/kg respectively.

This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations.

C2PC to add a small screen and camera, and secondary battery.


TCB Grant - Application BpK8lRwshX/GH+KfCWYrbw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Warwick Ltd
Unit 1 Pendle Place
Skelmersdale, WN8 9PN
United Kingdom 		Date of Grant: 09/13/2024

Application Dated: 09/12/2024
Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road,
Yang Pu District, Shanghai, China
Shanghai, 200433
China
 
Attention: Fang Lu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T6F10NA
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Smart POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.0076  

RF output power is peak conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported standalone 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.37 W/kg and 1.29 W/kg respectively. The highest reported simultaneous 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.55 W/kg and 1.59 W/kg respectively.

EAS Grant - Application BpK8lRwshX/GH+KfCWYrbw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road, Yang Pu District, Shanghai, China
Shanghai, 200433
China 		  Date of Grant: 09/13/2024

Application Dated: 09/12/2024
 
Attention: Fang Lu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T6F10NA
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Smart POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.0076  

RF output power is peak conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported standalone 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.37 W/kg and 1.29 W/kg respectively. The highest reported simultaneous 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.55 W/kg and 1.59 W/kg respectively.



TCB Grant - Application AmvOec1pxpafXlFqZ2NZuQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 08/19/2026

Application Dated: 08/19/2026
Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road,
Yang Pu District, Shanghai, China
Shanghai, 200433
China
 
Attention: Minfei Chen , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T6F10NA
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Smart POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.01  
CC 15E 5260.0  -  5320.0 0.0091  
CC 15E 5500.0  -  5700.0 0.0116  
CC 15E 5745.0  -  5825.0 0.0174  

RF output power is conducted. Device supports 20, 40 and 80 MHz BW modes. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported standalone 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.37 W/kg and 1.29 W/kg respectively. The highest reported simultaneous 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.55 W/kg and 1.59 W/kg respectively.

C2PC to add a small screen and camera, and secondary battery.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 6+X7IfQXpEybwfijZDym0Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 08/19/2026

Application Dated: 08/19/2026
Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road,
Yang Pu District, Shanghai, China
Shanghai, 200433
China
 
Attention: Minfei Chen , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T6F10NA
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Smart POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 13.56  -  13.56  

C2PC to add a small screen and camera, and secondary battery.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 1HKqEWZD8jPK9rhEDWAXgw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 08/19/2026

Application Dated: 08/19/2026
Shanghai Sunmi Technology Co.,Ltd.
Room 505,No.388,Song Hu Road,
Yang Pu District, Shanghai, China
Shanghai, 200433
China
 
Attention: Minfei Chen , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T6F10NA
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Smart POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15B  - 

C2PC to add a small screen and camera, and secondary battery.

CC: This device is certified pursuant to two different Part 15 rules sections.