FCC ID 2AH3O-MLM10

Mobile Launch Monitor(MLM)

by Rapsodo Pte Ltd

Grantee Code: 2AH3O   Product Code: MLM10
Latest application date: 2019-06-12

FCC ID Device Details

FCC ID2AH3O-MLM10
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AH3O
Product CodeMLM10
Applicant BusinessRapsodo Pte Ltd 🇸🇬
Related Domains rapsodo.com
Equipment ClassMobile Launch Monitor(MLM)
Test FirmBureau Veritas CPS(H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-06-12
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: VPYLBZF Grant Date: 06/27/20142019-05-16

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2019-09-01PDF 3.4 MB
Internal photosInternal Photos2019-09-01PDF 891.6 KB
External photosExternal Photos2019-09-01PDF 663.2 KB
External photos revExternal Photos2019-05-16PDF 129.5 KB
Label LocationID Label/Location Info2019-06-12PDF 665.8 KB
Label SampleID Label/Location Info2019-06-12PDF 131 KB
Label sample and label location revID Label/Location Info2019-05-16PDF 56.2 KB
Test setup photosTest Setup Photos2019-09-01PDF 372.4 KB
Test report(DTS-WLAN)_revTest Report2019-06-12PDF 738 KB
Agent authorizationCover Letter(s)2019-06-12PDF 148.5 KB
C2PC request letterCover Letter(s)2019-06-12PDF 316.9 KB
Confidentiality request (Short term)Cover Letter(s)2019-06-12PDF 116.9 KB
Contact AuthorizationCover Letter(s)2019-06-12PDF 267.2 KB
Agent AuthorizationCover Letter(s)2019-05-16PDF 153.7 KB
Declaration for Change ID AuthorizationCover Letter(s)2019-05-16PDF 321.7 KB
Declaration for Contact AuthorizationCover Letter(s)2019-05-16PDF 267.2 KB
Declaration for Request for Change IDCover Letter(s)2019-05-16PDF 163.3 KB
RF Exposure Info (MPE)RF Exposure Info2019-06-12PDF 250.6 KB

Application Information

Application IDsNLl4jOrmO9dJJ9V/nCPwA==
Final Action Date2019-06-12
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0025501990
ModelMLM10
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionMobile Launch Monitor(MLM)
Responsible PartyBatuhan Okur, Director, batuhan@rapsodo.com , 6598206688
AgentAmanda Amanda Amanda, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, amanda.wu@tw.bureauveritas.com , 886-3-3183232
Test FirmEric Lin, Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch, eric-wp.lin@tw.bureauveritas.com , 886-3-6668565
TCB Emailcertification@nacsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date09/01/2019
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change for adding one new host platform (MLM1.0 by Rapsodo), which contains one 24GHz module (FCC ID: UXS-SMR3X3) as described in this filing. Co-location of this BT-LE module (FCC ID: 2AH3O-MLM10) and the 24GHz module in the new host platform were evaluated for mobile exposure conditions. Limited Modular approval. Output power listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

Applications

Application IDDatePurpose
sNLl4jOrmO9dJJ9V/nCPwA==2019-06-12Class II permissive change or modification of presently authorized equipment
TDaw1UxsWVoNJLgzkY573g==2019-05-16Change in identification of presently authorized equipment. Original FCC ID: VPYLBZF Grant Date: 06/27/2014

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.001100015C

Grants

TCB Grant - Application TDaw1UxsWVoNJLgzkY573g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  North American EMC Certification Services Inc
24889 Ferguson Ave
Maple Ridge, BC,
Canada
Date of Grant: 05/16/2019

Application Dated: 05/16/2019
Rapsodo Pte Ltd
Block 67, Ayer Rajah Crescent, #04-10
singapore, 139950
Singapore
 
Attention: Batuhan Okur , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH3O-MLM10
Name of Grantee:  Rapsodo Pte Ltd
Equipment Class: Digital Transmission System
Notes: Communication Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0011  

Limited Modular approval. Output power listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

EAS Grant - Application TDaw1UxsWVoNJLgzkY573g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Rapsodo Pte Ltd
Block 67, Ayer Rajah Crescent, #04-10
singapore, 139950
Singapore
  Date of Grant: 05/16/2019

Application Dated: 05/16/2019
 
Attention: Batuhan Okur , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH3O-MLM10
Name of Grantee:  Rapsodo Pte Ltd
Equipment Class: Digital Transmission System
Notes: Communication Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0011  

Limited Modular approval. Output power listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.



TCB Grant - Application sNLl4jOrmO9dJJ9V/nCPwA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  North American EMC Certification Services Inc
24889 Ferguson Ave
Maple Ridge, BC,
Canada
Date of Grant: 06/12/2019

Application Dated: 06/12/2019
Rapsodo Pte Ltd
Block 67, Ayer Rajah Crescent, #04-10
singapore, 139950
Singapore
 
Attention: Batuhan Okur , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH3O-MLM10
Name of Grantee:  Rapsodo Pte Ltd
Equipment Class: Digital Transmission System
Notes: Mobile Launch Monitor(MLM)
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0011  

Class II Permissive Change for adding one new host platform (MLM1.0 by Rapsodo), which contains one 24GHz module (FCC ID: UXS-SMR3X3) as described in this filing. Co-location of this BT-LE module (FCC ID: 2AH3O-MLM10) and the 24GHz module in the new host platform were evaluated for mobile exposure conditions.

Limited Modular approval. Output power listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.


EAS Grant - Application sNLl4jOrmO9dJJ9V/nCPwA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Rapsodo Pte Ltd
Block 67, Ayer Rajah Crescent, #04-10
singapore, 139950
Singapore
  Date of Grant: 06/12/2019

Application Dated: 06/12/2019
 
Attention: Batuhan Okur , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH3O-MLM10
Name of Grantee:  Rapsodo Pte Ltd
Equipment Class: Digital Transmission System
Notes: Mobile Launch Monitor(MLM)
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0011  

Class II Permissive Change for adding one new host platform (MLM1.0 by Rapsodo), which contains one 24GHz module (FCC ID: UXS-SMR3X3) as described in this filing. Co-location of this BT-LE module (FCC ID: 2AH3O-MLM10) and the 24GHz module in the new host platform were evaluated for mobile exposure conditions.

Limited Modular approval. Output power listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.



Mail To: