FCC ID 2AH3X-M001

FCC ID 2AH3X-M001 ID-Label-Location-Info, 2AH3X M001, 2AH3X-M001, 2AH3X-MOO1, 2AH3X-M00I

Aigale Corporation IEEE 802.11 b/g/n WLAN Microcontroller Module M001

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: 2AH3X-M001 is 2AH3X. The remaining characters of the FCC ID, -M001, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: IEEE 802.11 b/g/n WLAN Microcontroller Module

FCC ID 2AH3X-M001 ID-Label-Location-Info

*Please Check Individual Documents for more images

Application: IEEE 802.11 b/g/n WLAN Microcontroller Module
Equipment Class: DTS - Digital Transmission System
Short Link: fcc.id/2AH3X-M001
Sources: FCC.gov | FCC.report
Registered By: Aigale Corporation - 2AH3X (China)

App #	Purpose	Date	Unique ID
1	Original Equipment	2016-06-01	Jxs9x/i1N+8hzQ7tvVDYOA==

Operating Frequencies

Frequency Range	Power Output	Rule Parts	Line Entry
2.412-2.462 GHz	205 mW	15C	1

Exhibits

Document	Type	Submitted Available
User Manual	Users Manual Adobe Acrobat PDF (903 kB)	2016-06-01 2016-08-30
Test Setup Photo	Test Setup Photos Adobe Acrobat PDF (1462 kB)	2016-06-01 2016-08-30
Test Report	Test Report Adobe Acrobat PDF (1445 kB)	2016-06-01 2016-06-01
RF Exposure Information (MPE)	RF Exposure Info Adobe Acrobat PDF (190 kB)	2016-06-01 2016-06-01
Modular Approval Request	Cover Letter(s) Adobe Acrobat PDF (18 kB)	2016-06-01 2016-06-01
Internal Photos	Internal Photos Adobe Acrobat PDF (148 kB)	2016-06-01 2016-08-30
ID Label Location Information	ID Label/Location Info Adobe Acrobat PDF (32 kB)	2016-06-01 2016-06-01
External Photos	External Photos Adobe Acrobat PDF (2033 kB)	2016-06-01 2016-08-30
Cover Letter - Confidentiality Request - Short Term (90 DAYS).pdf	Cover Letter(s) Adobe Acrobat PDF (179 kB)	2016-06-01 2016-06-01
Cover Letter - Confidentiality Request - Long Term rev	Cover Letter(s) Adobe Acrobat PDF (224 kB)	2016-06-01 2016-06-01
Cover Letter - Agent Authorization	Cover Letter(s) Adobe Acrobat PDF (193 kB)	2016-06-01 2016-06-01
Attestation - Channel and Mode Declaration	Attestation Statements Adobe Acrobat PDF (147 kB)	2016-06-01 2016-06-01
Block Diagram	Block Diagram Adobe Acrobat PDF (205 kB)	2016-06-01
Schematics	Schematics Adobe Acrobat PDF (68 kB)	2016-06-01
Technical Description	Operational Description Adobe Acrobat PDF (61 kB)	2016-06-01

Correspondence

App #	Document	Date
1	[Re-Sent]Short-Term Confidential Expiration Email generated [Aug 22 2016]	2016-08-22 13:40:39
1	[Re-Sent]Short-Term Confidential Expiration Email generated [Aug 22 2016]	2016-08-22 13:43:45

Application Forms

1 (2016-06-01)

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	Aigale Corporation
FCC Registration Number (FRN):	0025509001
Alphanumeric FCC ID:	2AH3XM001
Unique Application Identifier:	Jxs9x/i1N+8hzQ7tvVDYOA==
Line one:	No.8,Lane 66,Chenbao Road,Malu County,
Line two:	Jiading District
City:	Shanghai
State:	N/A
Country:	China

TCB Information

TCB Application Email Address:	certification@curtis-straus.com
TCB Scope:	A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID

Grantee Code:	2AH3X
Product Code:	-M001

Person at the applicant's address to receive grant or for contact

Name:	Patrick Lin
Title:	Director

Telephone Number:

+86-21-51916666

Extension:

5580

Fax Number:	+86-21-51911580
Email:	Patrick.Lin@aigale.com

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: Yes

If so, specify the short-term confidentiality release date (MM/DD/YYYY format): 08/30/2016
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	IEEE 802.11 b/g/n WLAN Microcontroller Module

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? No

Modular Equipment

Modular Type: Single Modular Approval

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch

First Name: Richard

Last Name: Chen

Telephone Number:

886-3-3183232

Extension:

1884

Fax Number: +886-3-2115834

E-mail: richard.chen@tw.bureauveritas.com

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: Patrick Lin

Title of authorized signature:

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460

Date of Grant: 06/01/2016

Application Dated: 06/01/2016

Aigale Corporation

No.8,Lane 66,Chenbao Road,Malu County,

Jiading District

Shanghai,
China

Attention: Patrick Lin , Director

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AH3X-M001

Name of Grantee:	Aigale Corporation

Equipment Class:	Digital Transmission System
Notes:	IEEE 802.11 b/g/n WLAN Microcontroller Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0 - 2462.0	0.205

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Aigale Corporation
No.8,Lane 66,Chenbao Road,Malu County, Jiading District
Shanghai,
China