FCC ID 2AH7L-UPSC
EcoStruxure Panel Server Entry
by Schneider Electric Industrie SAS
Grantee Code: 2AH7L Product Code: UPSC
Latest application date: 2025-09-15
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2025-09-15 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-08 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-08 |
| 5180-5240 MHz | Original Equipment | 2022-05-24 |
| 2402-2480 MHz | Original Equipment | 2022-05-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2022-11-20 | PDF 3.4 MB |
| Internal Photos_rev | Internal Photos | 2024-01-08 | PDF 1.3 MB |
| Internal photos | Internal Photos | 2022-11-20 | PDF 1.3 MB |
| External photos | External Photos | 2022-11-20 | PDF 424.2 KB |
| Label Sample & Label Location | ID Label/Location Info | 2022-05-24 | PDF 1,009.9 KB |
| Label Sample and Label Location | ID Label/Location Info | 2022-05-24 | PDF 1,009.9 KB |
| Test Set Up Photos | Test Setup Photos | 2025-12-14 | PDF 120.4 KB |
| Test Set Up Photos_rev | Test Setup Photos | 2024-01-08 | PDF 238.7 KB |
| Test setup photos | Test Setup Photos | 2022-11-20 | PDF 388.9 KB |
| Test Report rev 2 | Test Report | 2025-09-15 | PDF 277.5 KB |
| Test Report (Antenna Report) | Test Report | 2024-01-08 | PDF 4.9 MB |
| Test Report (DTS-BT LE)_rev | Test Report | 2024-01-08 | PDF 356.2 KB |
| Test Report (DTS-WLAN)_rev | Test Report | 2024-01-08 | PDF 808 KB |
| Test Report (DTS-Zigbee)_rev | Test Report | 2024-01-08 | PDF 407.3 KB |
| Test Report (NII)_rev | Test Report | 2024-01-08 | PDF 747.3 KB |
| Test Report (DTS-Zigbee) | Test Report | 2022-05-24 | PDF 619.9 KB |
| Test report (DTS-BTLE) | Test Report | 2022-05-24 | PDF 605.7 KB |
| Test report (DTS-WLAN) | Test Report | 2022-05-24 | PDF 1.3 MB |
| Test report (NII) | Test Report | 2022-05-24 | PDF 952.3 KB |
| Attestation (Statements of part 2.911(d)(5)) | Attestation Statements | 2025-09-15 | PDF 141.7 KB |
| Attestation (U.S. local Agent Letter) | Attestation Statements | 2025-09-15 | PDF 193.1 KB |
| Attestation (Statements of part 2.911(d)(5)) | Attestation Statements | 2024-01-08 | PDF 182.3 KB |
| Attestation (U.S. local Agent Letter of part 2.911(d)(7)) | Attestation Statements | 2024-01-08 | PDF 214.1 KB |
| Attestation (Channel and Mode Declaration) | Attestation Statements | 2022-05-24 | PDF 456.6 KB |
| Confidentiality Request (Long term) rev | Cover Letter(s) | 2025-09-15 | PDF 142.4 KB |
| Confidentiality Request (Short term) | Cover Letter(s) | 2025-09-15 | PDF 166.4 KB |
| Cover Letter (Agent Authorization) | Cover Letter(s) | 2025-09-15 | PDF 145.4 KB |
| Cover Letter (Description of Change) | Cover Letter(s) | 2025-09-15 | PDF 93.8 KB |
| Confidentiality Request (Long term) | Cover Letter(s) | 2024-01-08 | PDF 188.9 KB |
| Cover Letter (Agent Authorization) | Cover Letter(s) | 2024-01-08 | PDF 165.9 KB |
| Cover Letter (Description of Change) | Cover Letter(s) | 2024-01-08 | PDF 43.2 KB |
| Confidentiality Request (Long term) | Cover Letter(s) | 2022-05-24 | PDF 135.8 KB |
| Confidentiality request (Long term) | Cover Letter(s) | 2022-05-24 | PDF 135.8 KB |
| Confidentiality request (Short term) | Cover Letter(s) | 2022-05-24 | PDF 147.5 KB |
| Cover Letter (Agent Authorization) | Cover Letter(s) | 2022-05-24 | PDF 294.6 KB |
| RF Exposure Info (MPE) rev | RF Exposure Info | 2025-09-15 | PDF 225.6 KB |
| RF Exposure Info (MPE)_rev | RF Exposure Info | 2024-01-08 | PDF 230.4 KB |
| RF Exposure Info (MPE) | RF Exposure Info | 2022-05-24 | PDF 178.1 KB |
| Block diagram Metadata only | Block Diagram | PDF 448 KB | |
| Schematics (CPAS 277V) Metadata only | Schematics | PDF 882.9 KB | |
| Schematics (CPAS Digital) Metadata only | Schematics | PDF 1.3 MB | |
| Schematics (CPAS HMI) Metadata only | Schematics | PDF 899.1 KB | |
| Operation Description_rev Metadata only | Operational Description | PDF 191.6 KB | |
| Operational Description Metadata only | Operational Description | PDF 162.7 KB | |
| Software Operational Description rev Metadata only | Operational Description | PDF 405.8 KB | |
| Software Operational Description rev 2 Metadata only | Operational Description | PDF 2.1 MB |
Application Information
| Application ID | aArIwpPTKE5N5NMTy5MJJQ== |
|---|---|
| Final Action Date | 2025-09-15 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0025527185 |
| Model | UPSC |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | EcoStruxure Panel Server Entry |
| Responsible Party | Pavana S, pavana.s@se.com  , +917760972017 |
| Test Firm | Ken Liu, Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch, ken.liu@bureauveritas.com  , +886-3-2600609 |
| TCB Email | certification@nacsemc.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Long-Term Confidentiality | Yes |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| aArIwpPTKE5N5NMTy5MJJQ== | 2025-09-15 | Class II permissive change or modification of presently authorized equipment |
| ltPJMRqyFJd6yFdX0U8O5w== | 2024-01-08 | Class II permissive change or modification of presently authorized equipment |
| +fMsH9a2ghG0E23T2KlCNQ== | 2024-01-08 | Class II permissive change or modification of presently authorized equipment |
| 5gebdYtsZxBM9h4r9fk4xA== | 2022-05-24 | Original Equipment |
| 0uNxxrPHObk3G39mY3Z1rQ== | 2022-05-24 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application ltPJMRqyFJd6yFdX0U8O5w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 01/08/2024 Application Dated: 01/07/2024 |
| Schneider Electric Industrie SAS |
| 31 rue Pierre Mendes France, eybens |
| grenoble cedex 9, 38050 France |
| Attention: Pavana S , Deputy General Manager - Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH7L-UPSC |
| Name of Grantee: | Schneider Electric Industrie SAS |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | EcoStruxure Panel Server Entry |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0004 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0003 |
| C2PC for reducing the power setting of all bands and re-evaluating antenna gains as described in this filing. Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ltPJMRqyFJd6yFdX0U8O5w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Schneider Electric Industrie SAS 31 rue Pierre Mendes France, eybens grenoble cedex 9, 38050 France |
Date of Grant: 01/08/2024 Application Dated: 01/07/2024 |
| Attention: Pavana S , Deputy General Manager - Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH7L-UPSC |
| Name of Grantee: | Schneider Electric Industrie SAS |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | EcoStruxure Panel Server Entry |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0004 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0003 |
| C2PC for reducing the power setting of all bands and re-evaluating antenna gains as described in this filing. Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 09/15/2025 Application Dated: 09/15/2025 |
| Schneider Electric Industrie SAS |
| 31 rue Pierre Mendes France, eybens |
| grenoble cedex 9, 38050 France |
| Attention: Pavana S , Deputy General Manager - Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH7L-UPSC |
| Name of Grantee: | Schneider Electric Industrie SAS |
| Equipment Class: | Digital Transmission System |
| Notes: | EcoStruxure Panel Server Entry |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0002 | ||
| CC | 15C | 2405.0 - 2480.0 | 0.001 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0004 |
| C2PC for enabling 2.4GHz AP mode through firmware update as described in the filing. Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application 5gebdYtsZxBM9h4r9fk4xA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 05/24/2022 Application Dated: 05/24/2022 |
| Schneider Electric Industrie SAS |
| 31 rue Pierre Mendes France, eybens |
| grenoble cedex 9, 38050 France |
| Attention: Michael MARY , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH7L-UPSC |
| Name of Grantee: | Schneider Electric Industrie SAS |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | EcoStruxure Panel Server Entry |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.055 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.055 |
| Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 5gebdYtsZxBM9h4r9fk4xA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Schneider Electric Industrie SAS 31 rue Pierre Mendes France, eybens grenoble cedex 9, 38050 France |
Date of Grant: 05/24/2022 Application Dated: 05/24/2022 |
| Attention: Michael MARY , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH7L-UPSC |
| Name of Grantee: | Schneider Electric Industrie SAS |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | EcoStruxure Panel Server Entry |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.055 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.055 |
| Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 05/24/2022 Application Dated: 05/24/2022 |
| Schneider Electric Industrie SAS |
| 31 rue Pierre Mendes France, eybens |
| grenoble cedex 9, 38050 France |
| Attention: Michael MARY , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH7L-UPSC |
| Name of Grantee: | Schneider Electric Industrie SAS |
| Equipment Class: | Digital Transmission System |
| Notes: | EcoStruxure Panel Server Entry |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC | 15C | 2405.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.044 |
| Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 0uNxxrPHObk3G39mY3Z1rQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Schneider Electric Industrie SAS 31 rue Pierre Mendes France, eybens grenoble cedex 9, 38050 France |
Date of Grant: 05/24/2022 Application Dated: 05/24/2022 |
| Attention: Michael MARY , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH7L-UPSC |
| Name of Grantee: | Schneider Electric Industrie SAS |
| Equipment Class: | Digital Transmission System |
| Notes: | EcoStruxure Panel Server Entry |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC | 15C | 2405.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.044 |
| Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 01/08/2024 Application Dated: 01/07/2024 |
| Schneider Electric Industrie SAS |
| 31 rue Pierre Mendes France, eybens |
| grenoble cedex 9, 38050 France |
| Attention: Pavana S , Deputy General Manager - Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH7L-UPSC |
| Name of Grantee: | Schneider Electric Industrie SAS |
| Equipment Class: | Digital Transmission System |
| Notes: | EcoStruxure Panel Server Entry |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0002 | ||
| CC | 15C | 2405.0 - 2480.0 | 0.001 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0004 |
| C2PC for reducing the power setting of all bands and re-evaluating antenna gains as described in this filing. Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application +fMsH9a2ghG0E23T2KlCNQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Schneider Electric Industrie SAS 31 rue Pierre Mendes France, eybens grenoble cedex 9, 38050 France |
Date of Grant: 01/08/2024 Application Dated: 01/07/2024 |
| Attention: Pavana S , Deputy General Manager - Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH7L-UPSC |
| Name of Grantee: | Schneider Electric Industrie SAS |
| Equipment Class: | Digital Transmission System |
| Notes: | EcoStruxure Panel Server Entry |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0002 | ||
| CC | 15C | 2405.0 - 2480.0 | 0.001 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0004 |
| C2PC for reducing the power setting of all bands and re-evaluating antenna gains as described in this filing. Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |