FCC ID 2AH7X-VCF156S

ViewClix 15

by ViewClix LLC

Grantee Code: 2AH7X   Product Code: VCF156S
Latest application date: 2020-06-14

FCC ID Device Details

FCC ID2AH7X-VCF156S
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AH7X
Product CodeVCF156S
Applicant BusinessViewClix LLC 🇺🇸
Equipment ClassViewClix 15
Test FirmShenzhen Toby Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2020-06-14
2402-2480 MHzOriginal Equipment2020-06-14

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2020-06-14PDF 3.6 MB
Internal PhotosInternal Photos2020-06-14PDF 2.8 MB
External PhotosExternal Photos2020-06-14PDF 2.2 MB
Label & Label LocationID Label/Location Info2020-06-14PDF 787.3 KB
Test Setup PhotosTest Setup Photos2020-06-14PDF 1.1 MB
Test setup photosTest Setup Photos2020-06-14PDF 1.1 MB
Test report-DSSTest Report2020-06-14PDF 3.1 MB
Test report-DTS-2G4WLANTest Report2020-06-14PDF 3.2 MB
Test report-DTS-BLETest Report2020-06-14PDF 1.4 MB
Declaration of Model DifferenceCover Letter(s)2020-06-14PDF 17.7 KB
Declaration of disable WLAN Channel 12 and 13Cover Letter(s)2020-06-14PDF 70.8 KB
FCC Confidentiality request letterCover Letter(s)2020-06-14PDF 24.9 KB
FCC POACover Letter(s)2020-06-14PDF 18.8 KB
RF Exposure Info-MPERF Exposure Info2020-06-14PDF 342.1 KB
RF exposure info-MPERF Exposure Info2020-06-14PDF 342.1 KB
Block diagram Metadata onlyBlock DiagramPDF 20.5 KB
Schematic Metadata onlySchematicsPDF 644.8 KB
Declaration concerning Antenna Specification Metadata onlyOperational DescriptionPDF 80.4 KB
Operation description Metadata onlyOperational DescriptionPDF 143.9 KB

Application Information

Application IDxgILGkvobz6SfUHp1oYdXQ==
Final Action Date2020-06-14
Application PurposeOriginal Equipment
Applicant FRN0025529694
ModelVCF156S
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionViewClix 15
Responsible PartyRobert Ranck, rob.ranck@gmail.com , 5035211056
AgentIvan Ivan Ivan, Shenzhen Toby Technology Co., Ltd., toby858@tongbiao.com , (86)755-26509301
Test FirmRay Lai, Shenzhen Toby Technology Co., Ltd., toby857@tongbiao.com , ---
TCB Emailjoergkusig@eurofins.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
xgILGkvobz6SfUHp1oYdXQ==2020-06-14Original Equipment
Dh3/M/Pu15h8h/rxjoRXwg==2020-06-14Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.000615C
2402-2480 MHz0.001400015C
2412-2462 MHz0.047915C
2422-2452 MHz0.030815C

Grants

TCB Grant - Application xgILGkvobz6SfUHp1oYdXQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 06/14/2020

Application Dated: 06/14/2020
ViewClix LLC
11165 SW Novare Place
Tigard, OR 97223
 
Attention: Robert Ranck

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH7X-VCF156S
Name of Grantee:  ViewClix LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: ViewClix 15
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0014  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

EAS Grant - Application xgILGkvobz6SfUHp1oYdXQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ViewClix LLC
11165 SW Novare Place
Tigard, OR 97223
United States
  Date of Grant: 06/14/2020

Application Dated: 06/14/2020
 
Attention: Robert Ranck

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH7X-VCF156S
Name of Grantee:  ViewClix LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: ViewClix 15
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0014  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.



TCB Grant - Application Dh3/M/Pu15h8h/rxjoRXwg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 06/14/2020

Application Dated: 06/14/2020
ViewClix LLC
11165 SW Novare Place
Tigard, OR 97223
 
Attention: Robert Ranck

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH7X-VCF156S
Name of Grantee:  ViewClix LLC
Equipment Class: Digital Transmission System
Notes: ViewClix 15
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0006  
15C 2412.0  -  2462.0 0.0479  
15C 2422.0  -  2452.0 0.0308  

Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

EAS Grant - Application Dh3/M/Pu15h8h/rxjoRXwg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ViewClix LLC
11165 SW Novare Place
Tigard, OR 97223
United States
  Date of Grant: 06/14/2020

Application Dated: 06/14/2020
 
Attention: Robert Ranck

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH7X-VCF156S
Name of Grantee:  ViewClix LLC
Equipment Class: Digital Transmission System
Notes: ViewClix 15
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0006  
15C 2412.0  -  2462.0 0.0479  
15C 2422.0  -  2452.0 0.0308  

Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.



Mail To: