HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory

Shantou Chenghai Huiying Toys Factory Flying Saucer Series

FCC ID Filing: 2AHB8HYRCDRONE02
Purchase on Amazon: Flying Saucer Series

Trouble Viewing? See the or view the HTML Version or PDF in frame
Page 1 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 2 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 3 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 4 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 5 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 6 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 7 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 8 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 9 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 10 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 11 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 12 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 13 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 14 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 15 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 16 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 17 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 18 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 19 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 20 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 21 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 22 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 23 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 24 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 25 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 26 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 27 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 28 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 29 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 30 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 31 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 32 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 33 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 34 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 35 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Page 36 of HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory

SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
No. 1 Workshop, M-10, Middle section, Science & Technology Park,
Shenzhen, Guangdong, China 518057
Telephone:
Fax:
Email:
Report No.: SZEM170800841902
Page:
1 of 36
+86 (0) 755 2601 2053
+86 (0) 755 2671 0594
[email protected]
TEST REPORT
Application No.:
Applicant:
Address of Applicant:
SZEM1708008419CR
SHANTOU CHENGHAI HUIYING TOYS FACTORY
GUANGFENG INDUSTRIAL PARK, DENGFENG ROAD, GUANGYI STREET,
CHENGHAI AREA, SHANTOU, GUANGDONG, CHINA
Equipment Under Test (EUT):
EUT Name:
Flying Saucer Series
Model No.:
Please refer to section 2 ♣
Standards:
Please refer to section 2 of this report which indicates which model was actually
tested and which were electrically identical.
2AHB8HYRCDRONE02
47 CFR Part 15, Subpart C 15.249
Date of Receipt:
2017-08-10
Date of Test:
2017-08-23 to 2017-08-30
Date of Issue:
2017-09-01
Test Result :
Pass*
♣
FCC ID:
* In the configuration tested, the EUT complied with the standards specified above.
Jack Zhang
EMC Laboratory Manager
The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report.
If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system
complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical
Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical
Approvals in writing.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
2 of 36
Revision Record
Version
Chapter
01
Date
2017-09-01
Modifier
Remark
Original
Authorized for issue by:
Peter Geng /Project Engineer
Eric Fu /Reviewer
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
3 of 36
Test Summary
Radio Spectrum Technical Requirement
Item
Standard
Antenna
47 CFR Part 15,
Requirement
Subpart C 15.249
Radio Spectrum Matter Part
Item
Standard
47 CFR Part 15,
20dB Bandwidth
Subpart C 15.249
Field Strength of the
47 CFR Part 15,
Fundamental Signal
Subpart C 15.249
(15.249(a))
Method
N/A
Method
ANSI C63.10 (2013)
Section 6.9
ANSI C63.10 (2013)
Section 6.5&6.6
Restricted Band
Around Fundamental
Frequency
47 CFR Part 15,
Subpart C 15.249
ANSI C63.10 (2013)
Section 6.4&6.5&6.6
Radiated Emissions
47 CFR Part 15,
Subpart C 15.249
ANSI C63.10 (2013)
Section 6.4&6.5&6.6
Requirement
47 CFR Part 15,
Subpart C 15.203
Result
Requirement
47 CFR Part 15,
Subpart C 15.215
47 CFR Part 15,
Subpart C
15.249(a)
47 CFR Part 15,
Subpart C 15.205
& 15.249(d) &
15.209
47 CFR Part 15,
Subpart C 15.209
& 15.249 (a),(d)
Result
Pass
Pass
Pass
Pass
Pass
Remark:
Model No.: HY-60, HY-851, HY-851C, HY-851W, HY-851H, HY-851HW, HY-851S, HY-853, HY-853C,
HY-853W, HY-853H, HY-853HW, HY-60C, HY-60H, HY-60W, HY-60HC, HY-60HW, HY-007, HY-007C,
HY-007H, HY-007W, HY-007HC, HY-007HW, HY-808, HY-808C, HY-808H, HY-808W, HY-808HC,
HY-808HW, HY-80, HY-80C, HY-80H, HY-80W, HY-80HC, HY-80HW, HY-50, HY-50C, HY-50W, HY50H, HY-50HC, HY-50HW, HY-52, HY-52C, HY-52W, HY-52H, HY-52HC, HY-52HW, HY-55, HY-55C,
HY-55W, HY-55H, HY-55HC, HY-55HW, HY-85, HY-85C, HY-85H, HY-85W, HY-85HC, HY-85HW,
HY-30, HY-30C, HY-30W, HY-30H, HY-30HC, HY-30HW, PT1645, PT1602
Only the model HY-60 was tested, since the electrical circuit design, layout, components used, internal
wiring and functions were identical for all the above models, with only difference on colour, appearance,
package.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
4 of 36
Contents
Page
COVER PAGE ..................................................................................................................................... 1
TEST SUMMARY ................................................................................................................................ 3
CONTENTS ......................................................................................................................................... 4
GENERAL INFORMATION .................................................................................................................. 5
4.1
4.2
4.3
4.4
4.5
4.6
4.7
DETAILS OF E.U.T. ......................................................................................................................... 5
DESCRIPTION OF SUPPORT UNITS .................................................................................................... 5
MEASUREMENT UNCERTAINTY ......................................................................................................... 5
TEST LOCATION ............................................................................................................................. 6
TEST FACILITY ............................................................................................................................... 6
DEVIATION FROM STANDARDS.......................................................................................................... 6
ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 6
EQUIPMENT LIST ............................................................................................................................... 7
RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................11
6.1
ANTENNA REQUIREMENT ................................................................................................................11
6.1.1 Test Requirement: ..................................................................................................................11
6.1.2 Conclusion ..............................................................................................................................11
RADIO SPECTRUM MATTER TEST RESULTS ................................................................................12
7.1
20DB BANDWIDTH .........................................................................................................................12
7.1.1 E.U.T. Operation .....................................................................................................................12
7.1.2 Measurement Procedure and Data .........................................................................................12
7.2
FIELD STRENGTH OF THE FUNDAMENTAL SIGNAL (15.249(A)) ............................................................13
7.2.1 E.U.T. Operation .....................................................................................................................13
7.2.2 Measurement Procedure and Data .........................................................................................13
7.3
RESTRICTED BAND AROUND FUNDAMENTAL FREQUENCY ..................................................................20
7.3.1 E.U.T. Operation .....................................................................................................................21
7.3.2 Measurement Procedure and Data .........................................................................................21
7.4
RADIATED EMISSIONS ....................................................................................................................26
7.4.1 E.U.T. Operation .....................................................................................................................26
7.4.2 Measurement Procedure and Data .........................................................................................26
PHOTOGRAPHS ................................................................................................................................35
8.1
8.2
8.3
RESTRICTED BAND AROUND FUNDAMENTAL FREQUENCY TEST SETUP................................................35
RADIATED EMISSIONS TEST SETUP .................................................................................................35
EUT CONSTRUCTIONAL DETAILS ....................................................................................................36
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
5 of 36
General Information
4.1 Details of E.U.T.
Power supply:
Operation frequency:
Channel number:
Channel separation:
Modulation type:
Antenna type:
Antenna gain:
remote: DC 4.5V by 3x1.5V "AA" batteries
2410-2470MHz (2410MHz, 2440MHz and 2470MHz were selected to
conduct all tests)
61
1MHz
GFSK
Integral antenna
0dBi
4.2 Description of Support Units
The EUT was tested as an independently unit
4.3 Measurement Uncertainty
No.
Item
Radio Frequency
Duty cycle
Occupied Bandwidth
RF conducted power
RF power density
Conducted Spurious emissions
RF Radiated power
Radiated Spurious emission test
10
11
12
Temperature test
Humidity test
Supply voltages
Time
Measurement Uncertainty
7.25 x 10-8
0.37%
3%
0.75dB
2.84dB
0.75dB
4.5dB (below 1GHz)
4.8dB (above 1GHz)
4.5dB (30MHz-1GHz)
4.8dB (1GHz-18GHz)
1°C
3%
1.5%
3%
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
6 of 36
4.4 Test Location
All tests were performed at:
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch
No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China.
518057.
Tel: +86 755 2601 2053
Fax: +86 755 2671 0594
No tests were sub-contracted.
4.5 Test Facility
The test facility is recognized, certified, or accredited by the following organizations:
• CNAS (No. CNAS L2929)
CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC
Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration
Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration
Laboratories) for the competence in the field of testing.
• A2LA (Certificate No. 3816.01)
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the
American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01.
• VCCI
The 10m Semi-anechoic chamber and Shielded Room of SGS-CSTC Standards Technical Services
Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with
Registration No.: G-823, R-4188, T-1153 and C-2383 respectively.
• FCC –Designation Number: CN1178
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized
as an accredited testing laboratory.
Designation Number: CN1178. Test Firm Registration Number: 406779.
• Industry Canada (IC)
Two 3m Semi-anechoic chambers and the 10m Semi-anechoic chamber of SGS-CSTC Standards
Technical Services Co., Ltd. Shenzhen Branch EMC Lab have been registered by Certification and
Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 4620C-1,
4620C-2, 4620C-3.
4.6 Deviation from Standards
None
4.7 Abnormalities from Standard Conditions
None
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
7 of 36
Equipment List
20dB Bandwidth
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
DC Power Supply
ZhaoXin
RXN-305D
SEM011-02
2016-10-09
2017-10-09
Spectrum Analyzer
Rohde & Schwarz
FSP
SEM004-06
2016-10-09
2017-10-09
Measurement Software
JS Tonscend
JS1120-2
BT/WIFI V2.
N/A
N/A
N/A
Signal Generator
Rohde & Schwarz
SML03
SEM006-02
2017-04-14
2018-04-13
Power Meter
Rohde & Schwarz
NRVS
SEM014-02
2016-10-09
2017-10-09
Field Strength of the Fundamental Signal (15.249(a))
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
3m Semi-Anechoic
Chamber
AUDIX
N/A
SEM001-02
2017-05-02
2020-05-01
Measurement Software
AUDIX
e3 V8.20146-27
N/A
N/A
N/A
Spectrum Analyzer
Rohde & Schwarz
FSU43
SEM004-08
2017-04-14
2018-04-13
ETS-Lindgren
3142C
SEM003-02
2017-03-05
2020-03-05
Rohde & Schwarz
HF907
SEM003-07
2015-06-14
2018-06-14
Schwarzbeck
BBHA 9170
SEM003-14
2017-06-16
2020-06-15
HP
8447D
SEM005-02
2016-10-09
2017-10-09
Black Diamond
Series
BDLNA0118-352810
SEM005-05
2016-10-09
2017-10-09
Compliance
Directions Systems
Inc.
PAP-0126
SEM004-10
2016-10-17
2017-10-17
SEM005-08
2017-04-14
2018-04-13
BiConiLog Antenna
(26-3000MHz)
Horn Antenna
(1-18GHz)
Horn Antenna
(15GHz-40GHz)
Pre-amplifier
(0.1-1300MHz)
Low Noise Amplifier
(100MHz-18GHz)
Pre-amplifier
(0.1-26.5GHz)
Pre-amplifier
(26GHz-40GHz)
Compliance
Directions Systems PAP-2640-50
Inc.
DC Power Supply
Zhao Xin
RXN-305D
SEM011-02
2016-10-09
2017-10-09
Active Loop Antenna
ETS-Lindgren
6502
SEM003-08
2015-08-14
2018-08-14
Band filter
N/A
N/A
SEM023-01
N/A
N/A
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
8 of 36
Restricted Band Around Fundamental Frequency
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
3m Semi-Anechoic
Chamber
AUDIX
N/A
SEM001-02
2017-05-02
2020-05-01
Measurement Software
AUDIX
e3 V8.20146-27
N/A
N/A
N/A
Spectrum Analyzer
Rohde & Schwarz
FSU43
SEM004-08
2017-04-14
2018-04-13
ETS-Lindgren
3142C
SEM003-02
2017-03-05
2020-03-05
Rohde & Schwarz
HF907
SEM003-07
2015-06-14
2018-06-14
Schwarzbeck
BBHA 9170
SEM003-14
2017-06-16
2020-06-15
HP
8447D
SEM005-02
2016-10-09
2017-10-09
Black Diamond
Series
BDLNA0118-352810
SEM005-05
2016-10-09
2017-10-09
Compliance
Directions Systems
Inc.
PAP-0126
SEM004-10
2016-10-17
2017-10-17
SEM005-08
2017-04-14
2018-04-13
BiConiLog Antenna
(26-3000MHz)
Horn Antenna
(1-18GHz)
Horn Antenna(
15GHz-40GHz)
Pre-amplifier
(0.1-1300MHz)
Low Noise Amplifier
(100MHz-18GHz)
Pre-amplifier
(0.1-26.5GHz)
Pre-amplifier
(26GHz-40GHz)
Compliance
Directions Systems PAP-2640-50
Inc.
DC Power Supply
Zhao Xin
RXN-305D
SEM011-02
2016-10-09
2017-10-09
Active Loop Antenna
ETS-Lindgren
6502
SEM003-08
2015-08-14
2018-08-14
Band filter
N/A
N/A
SEM023-01
N/A
N/A
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
9 of 36
Radiated Emissions
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
3m Semi-Anechoic
Chamber
AUDIX
N/A
SEM001-02
2017-05-02
2020-05-01
Measurement Software
AUDIX
e3 V8.20146-27
N/A
N/A
N/A
Spectrum Analyzer
Rohde & Schwarz
FSU43
SEM004-08
2017-04-14
2018-04-13
ETS-Lindgren
3142C
SEM003-02
2017-03-05
2020-03-05
Rohde & Schwarz
HF907
SEM003-07
2015-06-14
2018-06-14
Schwarzbeck
BBHA 9170
SEM003-14
2017-06-16
2020-06-15
HP
8447D
SEM005-02
2016-10-09
2017-10-09
Black Diamond
Series
BDLNA0118-352810
SEM005-05
2016-10-09
2017-10-09
Compliance
Directions Systems
Inc.
PAP-0126
SEM004-10
2016-10-17
2017-10-17
SEM005-08
2017-04-14
2018-04-13
BiConiLog Antenna
(26-3000MHz)
Horn Antenna
(1-18GHz)
Horn Antenna
(15GHz-40GHz)
Pre-amplifier
(0.1-1300MHz)
Low Noise Amplifier
(100MHz-18GHz)
Pre-amplifier
(0.1-26.5GHz)
Pre-amplifier
(26GHz-40GHz)
Compliance
Directions Systems PAP-2640-50
Inc.
DC Power Supply
Zhao Xin
RXN-305D
SEM011-02
2016-10-09
2017-10-09
Active Loop Antenna
ETS-Lindgren
6502
SEM003-08
2015-08-14
2018-08-14
Band filter
N/A
N/A
SEM023-01
N/A
N/A
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
ZJ1-2B
SEM002-03
2016-10-12
2017-10-12
ZJ1-2B
SEM002-04
2016-10-12
2017-10-12
General used equipment
Equipment
Humidity/ Temperature
Indicator
Humidity/ Temperature
Indicator
Shanghai
Meteorological
Industry Factory
Shanghai
Meteorological
Industry Factory
Humidity/ Temperature
Indicator
Mingle
N/A
SEM002-08
2016-10-12
2017-10-12
Barometer
Changchun
Meteorological
Industry Factory
DYM3
SEM002-01
2017-04-18
2018-04-18
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
10 of 36
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
11 of 36
Radio Spectrum Technical Requirement
6.1 Antenna Requirement
6.1.1 Test Requirement:
47 CFR Part 15, Subpart C 15.203
6.1.2 Conclusion
Standard Requirment:
An intentional radiator shall be designed to ensure that no antenna other than that furnished by the
responsible party shall be used with the device. The use of a permanently
attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the
manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of
a standard antenna jack or electrical connector is prohibited.
EUT Antenna:
The antenna is integrated on the main PCB and no consideration of replacement. The best case gain
of the antenna is 0dBi.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
12 of 36
Radio Spectrum Matter Test Results
7.1 20dB Bandwidth
Test Requirement
Test Method:
Limit:
47 CFR Part 15, Subpart C 15.215
ANSI C63.10 (2013) Section 6.9
N/A
7.1.1 E.U.T. Operation
Operating Environment:
Temperature:
25 °C
Atmospheric Pressure:
Humidity: 55 % RH
Test mode
a:TX mode_Keep the EUT in transmitting with modulation mode.
1005 mbar
7.1.2 Measurement Procedure and Data
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
13 of 36
7.2 Field Strength of the Fundamental Signal (15.249(a))
Test Requirement
Test Method:
Measurement Distance:
Limit:
47 CFR Part 15, Subpart C 15.249(a)
ANSI C63.10 (2013) Section 6.5&6.6
3m
Frequency
2400MHz-2483.5MHz
Limit (dBuV/m @3m)
Remark
94.0
Average Value
114.0
Peak Value
7.2.1 E.U.T. Operation
Operating Environment:
Atmospheric Pressure:
Temperature:
25 °C
Humidity: 55 % RH
Test mode
a:TX mode_Keep the EUT in transmitting with modulation mode.
1005 mbar
7.2.2 Measurement Procedure and Data
a. For below 1GHz, the EUT was placed on the top of a rotating table 0.8 meters above the ground at a
3 or 10 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of
the highest radiation.
b. For above 1GHz, the EUT was placed on the top of a rotating table 1.5 meters above the ground at
a 3 meter fully-anechoic chamber. The table was rotated 360 degrees to determine the position of the
highest radiation.
c. The EUT was set 3 or 10 meters away from the interference-receiving antenna, which was mounted
on the top of a variable-height antenna tower.
d. The antenna height is varied from one meter to four meters above the ground to determine the
maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set
to make the measurement.
e. For each suspected emission, the EUT was arranged to its worst case and then the antenna was
tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was
tuned to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the
maximum reading.
f. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum
Hold Mode.
g. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing
could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did
not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as
specified and then reported in a data sheet.
h. Test the EUT in the lowest channel,the middle channel,the Highest channel.
i. The radiation measurements are performed in X, Y, Z axis positioning for Transmitting mode, and
found the X axis positioning which it is the worst case.
j. Repeat above procedures until all frequencies measured was complete.
Remark: Level= Read Level+ Cable Loss+ Antenna Factor- Preamp Factor
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
14 of 36
Mode:a; Polarization:Horizontal; Modulation Type:GFSK; ; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
15 of 36
Mode:a; Polarization:Vertical; Modulation Type:GFSK; ; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
16 of 36
Mode:a; Polarization:Horizontal; Modulation Type:GFSK; ; Channel:middle
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
17 of 36
Mode:a; Polarization:Vertical; Modulation Type:GFSK; ; Channel:middle
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
18 of 36
Mode:a; Polarization:Horizontal; Modulation Type:GFSK; ; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
19 of 36
Mode:a; Polarization:Vertical; Modulation Type:GFSK; ; Channel:High
Remark:
1) The field strength is calculated by adding the Antenna Factor, Cable Factor & Preamplifier. The basic
equation with a sample calculation is as follows:
Final Test Level =Receiver Reading + Antenna Factor + Cable Factor – Preamplifier Factor
2) The peak field strength of any emission shall not exceed the maximum permitted average limits
specified above by more than 20 dB under any condition of modulation. So, only the above
measurement data were shown in the report.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
20 of 36
7.3 Restricted Band Around Fundamental Frequency
Test Requirement
Test Method:
Measurement Distance:
Limit:
47 CFR Part 15, Subpart C 15.205 & 15.249(d) & 15.209
ANSI C63.10 (2013) Section 6.4&6.5&6.6
3m
Frequency
Limit (dBuV/m @3m)
Remark
30MHz-88MHz
40.0
Quasi-peak Value
88MHz-216MHz
43.5
Quasi-peak Value
216MHz-960MHz
46.0
Quasi-peak Value
960MHz-1GHz
54.0
Quasi-peak Value
Above 1GHz
54.0
Average Value
Above 1GHz
74.0
Peak Value
Emission radiated outside of the specified frequency bands, except for harmonics, shall
be attenuated by at least 50 dB below the level of the fundamental or to the general
radiated emission limits in Section 15.209,whichever is the lesser attenuation.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
21 of 36
7.3.1 E.U.T. Operation
Operating Environment:
Temperature:
23 °C
Atmospheric Pressure:
Humidity: 54 % RH
Test mode
a:TX mode_Keep the EUT in transmitting with modulation mode.
1005 mbar
7.3.2 Measurement Procedure and Data
a. For below 1GHz, the EUT was placed on the top of a rotating table 0.8 meters above the ground at a
3 or 10 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of
the highest radiation.
b. For above 1GHz, the EUT was placed on the top of a rotating table 1.5 meters above the ground at
a 3 meter fully-anechoic chamber. The table was rotated 360 degrees to determine the position of the
highest radiation.
c. The EUT was set 3 or 10 meters away from the interference-receiving antenna, which was mounted
on the top of a variable-height antenna tower.
d. The antenna height is varied from one meter to four meters above the ground to determine the
maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set
to make the measurement.
e. For each suspected emission, the EUT was arranged to its worst case and then the antenna was
tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was
tuned to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the
maximum reading.
f. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum
Hold Mode.
g. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing
could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did
not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as
specified and then reported in a data sheet.
h. Test the EUT in the lowest channel,the middle channel,the Highest channel.
i. The radiation measurements are performed in X, Y, Z axis positioning for Transmitting mode, and
found the X axis positioning which it is the worst case.
j. Repeat above procedures until all frequencies measured was complete.
Remark: Level= Read Level+ Cable Loss+ Antenna Factor- Preamp Factor
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
22 of 36
Mode:a; Polarization:Horizontal; Modulation Type:GFSK; ; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
23 of 36
Mode:a; Polarization:Vertical; Modulation Type:GFSK; ; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
24 of 36
Mode:a; Polarization:Horizontal; Modulation Type:GFSK; ; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
25 of 36
Mode:a; Polarization:Vertical; Modulation Type:GFSK; ; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
26 of 36
7.4 Radiated Emissions
Test Requirement
Test Method:
Measurement Distance:
Limit:
47 CFR Part 15, Subpart C 15.209 & 15.249 (a),(d)
ANSI C63.10 (2013) Section 6.4&6.5&6.6
3m
0.009-0.490
Field strength
(microvolts/meter)
2400/F(kHz)
Limit
(dBuV/m)
0.490-1.705
24000/F(kHz)
1.705-30
30-88
88-216
216-960
960-1000
Above 1000
Frequency(MHz)
Measurement Distance
(meters)
300
30
30
30
100
150
200
500
500
40.0
43.5
46.0
54.0
54.0
QP
QP
QP
QP
AV
Detector
7.4.1 E.U.T. Operation
Operating Environment:
Temperature:
25 °C
Atmospheric Pressure:
1005 mbar
Humidity: 55 % RH
Test mode
a:TX mode_Keep the EUT in transmitting with modulation mode.
For below 1GHz, tests were conducted in high/middle/low channel and only the
worst case is reported.
7.4.2 Measurement Procedure and Data
For testing performed with the loop antenna, the center of the loop was positioned 1 m above the
ground and positioned with its plane vertical at the specified distance from the EUT. During testing the
loop was rotated about its vertical axis for maximum response at each azimuth and also investigated
with the loop positioned in the horizontal plane. Only the worst position of vertical was shown in the
report.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
27 of 36
30MHz~1GHz
QP value:
Mode:a; Polarization:Horizontal; Modulation Type:GFSK; ; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
28 of 36
Mode:a; Polarization:Vertical; Modulation Type:GFSK; ; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
29 of 36
Above 1GHz
Mode:a; Polarization:Horizontal; Modulation Type:GFSK; ; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
30 of 36
Mode:a; Polarization:Vertical; Modulation Type:GFSK; ; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
31 of 36
Mode:a; Polarization:Horizontal; Modulation Type:GFSK; ; Channel:middle
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
32 of 36
Mode:a; Polarization:Vertical; Modulation Type:GFSK; ; Channel:middle
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
33 of 36
Mode:a; Polarization:Horizontal; Modulation Type:GFSK; ; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
34 of 36
Mode:a; Polarization:Vertical; Modulation Type:GFSK; ; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
35 of 36
Photographs
8.1 Restricted Band Around Fundamental Frequency Test Setup
8.2 Radiated Emissions Test Setup
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170800841902
Page:
36 of 36
8.3 EUT Constructional Details
Refer to Appendix A - Photographs of EUT Constructional Details for SZEM1708008419CR.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
Download: HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Mirror Download [FCC.gov]HYRCDRONE02 Flying Saucer Series Test Report SZEM170800841902 RPT Shantou Chenghai Huiying Toys Factory
Document ID3556676
Application IDqZkBUCXF/uSp50s+ncwMcQ==
Document DescriptionTest Report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize114.8kB (1434949 bits)
Date Submitted2017-09-12 00:00:00
Date Available2017-09-12 00:00:00
Creation Date2017-09-07 14:02:11
Producing SoftwareGPL Ghostscript 8.64
Document Lastmod2017-09-07 06:02:14
Document TitleSZEM170800841902 RPT
Document CreatorPScript5.dll Version 5.2.2
Document Author: kate_bian

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
Page Count                      : 36
Create Date                     : 2017:09:07 14:02:11+08:00
Title                           : Microsoft Word - SZEM170800841902 RPT.doc
Producer                        : GPL Ghostscript 8.64
Author                          : kate_bian
Creator                         : PScript5.dll Version 5.2.2
Modify Date                     : 2017:09:07 06:02:14Z

Facebook Twitter Google+ RSS © FCCID.io 2017