FCC ID 2AHBN-AP45
802.11ax 6E Wireless Access Point
by Juniper Networks, Inc.
Grantee Code: 2AHBN Product Code: AP45
Latest application date: 2026-05-14
FCC ID Device Details
| FCC ID | 2AHBN-AP45 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AHBN |
| Product Code | AP45 |
| Applicant Business | Juniper Networks, Inc. 🇺🇸 |
| Related Domains |  juniper.net |
| Equipment Class | 802.11ax 6E Wireless Access Point |
| Test Firm | Sporton International Inc. Hsinchu Laboratory |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5955-7095 MHz | Class II permissive change or modification of presently authorized equipment | 2026-05-14 |
| 6535-6855 MHz | Original Equipment | 2026-05-14 |
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2026-05-14 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2026-05-14 |
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2023-02-08 |
| 5955-7095 MHz | Class II permissive change or modification of presently authorized equipment | 2023-02-08 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2023-02-08 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2022-06-13 |
| 5955-7095 MHz | Class II permissive change or modification of presently authorized equipment | 2022-06-13 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2022-06-13 |
| 5955-7095 MHz | Original Equipment | 2022-03-25 |
| 5180-5240 MHz | Original Equipment | 2022-03-25 |
| 2402-2480 MHz | Original Equipment | 2022-03-25 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2023-02-08 | PDF 3.3 MB |
| Internal Photos Part1 | Internal Photos | 2022-09-21 | PDF 5.9 MB |
| Internal Photos Part2 | Internal Photos | 2022-09-21 | PDF 5.8 MB |
| Internal Photos Part3 | Internal Photos | 2022-09-21 | PDF 2.6 MB |
| Internal Photos part1 | Internal Photos | 2022-09-21 | PDF 5.9 MB |
| Internal Photos part2 | Internal Photos | 2022-09-21 | PDF 5.8 MB |
| Internal Photos part3 | Internal Photos | 2022-09-21 | PDF 2.6 MB |
| External Photos | External Photos | 2023-08-07 | PDF 1.3 MB |
| External Photos Metadata only | External Photos | 2022-11-13 | PDF 1.3 MB |
| External Photos | External Photos | 2022-09-21 | PDF 1.9 MB |
| Label and Location | ID Label/Location Info | 2026-05-14 | PDF 124.4 KB |
| Label Information | ID Label/Location Info | 2022-03-25 | PDF 124.4 KB |
| Test Setup Photos 2.4GHz | Test Setup Photos | 2023-08-07 | PDF 712.7 KB |
| Test Setup Photos 5GHz | Test Setup Photos | 2023-08-07 | PDF 1.5 MB |
| Test Setup Photos 6GHz | Test Setup Photos | 2023-08-07 | PDF 551.1 KB |
| Test Setup Photos Ant. 1-8 | Test Setup Photos | 2023-08-07 | PDF 276.2 KB |
| Test Setup Photos Ant. 9-15 | Test Setup Photos | 2023-08-07 | PDF 337.7 KB |
| Test Setup Photos DFS | Test Setup Photos | 2023-08-07 | PDF 349.8 KB |
| TSUP 2.4GHz Metadata only | Test Setup Photos | 2022-11-13 | PDF 672.8 KB |
| TSUP 5GHz Metadata only | Test Setup Photos | 2022-11-13 | PDF 1.4 MB |
| TSUP 6GHz Metadata only | Test Setup Photos | 2022-11-13 | PDF 1.2 MB |
| TSUP DFS Metadata only | Test Setup Photos | 2022-11-13 | PDF 332.2 KB |
| TSUP Antenna | Test Setup Photos | 2022-09-21 | PDF 258.4 KB |
| Test Setup Photos 6E | Test Setup Photos | 2022-09-21 | PDF 489.6 KB |
| Test Setup Photos BT 5.0 | Test Setup Photos | 2022-09-21 | PDF 482.2 KB |
| Test Setup Photos WLAN 2.4GHz | Test Setup Photos | 2022-09-21 | PDF 782.6 KB |
| Test Setup Photos WLAN 5GHz | Test Setup Photos | 2022-09-21 | PDF 1.1 MB |
| Antenna Report 1-8 Part 1 | Test Report | 2026-05-14 | PDF 5.5 MB |
| Antenna Report 1-8 Part 2 | Test Report | 2026-05-14 | PDF 2 MB |
| Antenna Report 16, 18 | Test Report | 2026-05-14 | PDF 757.6 KB |
| Antenna Report 17, 19 | Test Report | 2026-05-14 | PDF 919.6 KB |
| Antenna Report 9-15 | Test Report | 2026-05-14 | PDF 2 MB |
| Test Report 6GHz Part 1 | Test Report | 2026-05-14 | PDF 5.4 MB |
| Test Report 6GHz Part 2 | Test Report | 2026-05-14 | PDF 5.4 MB |
| Test Report 6GHz Part 3 | Test Report | 2026-05-14 | PDF 5.4 MB |
| Test Report 6GHz Part 4 | Test Report | 2026-05-14 | PDF 5.4 MB |
| Test Report 6GHz Part 5 | Test Report | 2026-05-14 | PDF 5.4 MB |
| Test Report 6GHz Part 6 | Test Report | 2026-05-14 | PDF 3.2 MB |
| Test Report AFC | Test Report | 2026-05-14 | PDF 3.9 MB |
| Test Report 2.4GHz | Test Report | 2023-02-08 | PDF 4.1 MB |
| Test Report 5GHz part 1 | Test Report | 2023-02-08 | PDF 4.8 MB |
| Test Report 5GHz part 2 | Test Report | 2023-02-08 | PDF 4.5 MB |
| Test Report 5GHz part 3 | Test Report | 2023-02-08 | PDF 5.1 MB |
| Test Report 5GHz part 4 | Test Report | 2023-02-08 | PDF 5.1 MB |
| Test Report 5GHz part 5 | Test Report | 2023-02-08 | PDF 5.2 MB |
| Test Report 5GHz part 6 | Test Report | 2023-02-08 | PDF 1.6 MB |
| Test Report 6GHz part 1 | Test Report | 2023-02-08 | PDF 5.5 MB |
| Test Report 6GHz part 2 | Test Report | 2023-02-08 | PDF 5.1 MB |
| Test Report Ant. 1-8 part 1 | Test Report | 2023-02-08 | PDF 5.5 MB |
| Test Report Ant. 1-8 part 2 | Test Report | 2023-02-08 | PDF 2 MB |
| Test Report Ant. 16, 18 | Test Report | 2023-02-08 | PDF 757.6 KB |
| Test Report Ant. 17, 19 | Test Report | 2023-02-08 | PDF 919.6 KB |
| Test Report Ant. 9-15 | Test Report | 2023-02-08 | PDF 2 MB |
| Test Report DFS | Test Report | 2023-02-08 | PDF 2.8 MB |
| Test Report 2.4GHz | Test Report | 2022-05-17 | PDF 4.2 MB |
| Test Report 5GHz Part 1 | Test Report | 2022-05-17 | PDF 4.6 MB |
| Test Report 5GHz Part 2 | Test Report | 2022-05-17 | PDF 4.9 MB |
| Test Report 5GHz Part 3 | Test Report | 2022-05-17 | PDF 5.6 MB |
| Test Report 5GHz Part 4 | Test Report | 2022-05-17 | PDF 5.6 MB |
| Test Report 5GHz Part 5 | Test Report | 2022-05-17 | PDF 4.8 MB |
| Test Report 6GHz Part 1 | Test Report | 2022-05-17 | PDF 4.6 MB |
| Test Report 6GHz Part 10 | Test Report | 2022-05-17 | PDF 3.5 MB |
| Test Report 6GHz Part 2 | Test Report | 2022-05-17 | PDF 5.2 MB |
| Test Report 6GHz Part 3 | Test Report | 2022-05-17 | PDF 5.2 MB |
| Test Report 6GHz Part 4 | Test Report | 2022-05-17 | PDF 5.6 MB |
| Test Report 6GHz Part 5 | Test Report | 2022-05-17 | PDF 5.6 MB |
| Test Report 6GHz Part 6 | Test Report | 2022-05-17 | PDF 5.6 MB |
| Test Report 6GHz Part 7 | Test Report | 2022-05-17 | PDF 5.6 MB |
| Test Report 6GHz Part 8 | Test Report | 2022-05-17 | PDF 5.6 MB |
| Test Report 6GHz Part 9 | Test Report | 2022-05-17 | PDF 5.7 MB |
| Test Report DFS | Test Report | 2022-05-17 | PDF 3.7 MB |
| Test Report Antenna Part 1 | Test Report | 2022-03-25 | PDF 5.5 MB |
| Test Report Antenna Part 2 | Test Report | 2022-03-25 | PDF 2 MB |
| Test Report BT 5.0 | Test Report | 2022-03-25 | PDF 1.7 MB |
| Test Report WLAN 2.4GHz part 1 | Test Report | 2022-03-25 | PDF 5.9 MB |
| Test Report WLAN 2.4GHz part 2 | Test Report | 2022-03-25 | PDF 2.8 MB |
| Test Report WLAN 5GHz part 1 | Test Report | 2022-03-25 | PDF 5.8 MB |
| Test Report WLAN 5GHz part 2 | Test Report | 2022-03-25 | PDF 5.3 MB |
| Test Report WLAN 6E part1 | Test Report | 2022-03-25 | PDF 5.9 MB |
| Test Report WLAN 6E part2 | Test Report | 2022-03-25 | PDF 5.8 MB |
| Test Report WLAN 6E part3 | Test Report | 2022-03-25 | PDF 4.6 MB |
| Tets Report 5GHz Part 2 Metadata only | Test Report | PDF 4.9 MB | |
| Tets Report 5GHz Part 3 Metadata only | Test Report | PDF 5.6 MB | |
| Tets Report 5GHz Part 4 Metadata only | Test Report | PDF 5.6 MB | |
| Tets Report 5GHz Part 5 Metadata only | Test Report | PDF 4.8 MB | |
| Attestation Statements Part 2.911(d)(7) | Attestation Statements | 2026-05-14 | PDF 63.5 KB |
| Attstn Stmt part 2.911(d)(5)(i)&(ii) | Attestation Statements | 2026-05-14 | PDF 64.5 KB |
| Declaration of 6SD | Attestation Statements | 2026-05-14 | PDF 64.3 KB |
| Attestation Statements Part 2.911(d)(5)(i) & (ii) Metadata only | Attestation Statements | 2023-02-08 | PDF 52.5 KB |
| Attestation Statements Part 2.911(d)(7) | Attestation Statements | 2023-02-08 | PDF 51.2 KB |
| Attestation Statements part 2.911(d)(7) filing | Attestation Statements | 2023-02-08 | PDF 374.9 KB |
| Attstn Stmt Part 2.911(d)(5)(i)&(ii) | Attestation Statements | 2023-02-08 | PDF 52.5 KB |
| Declaration Letter of Operation | Attestation Statements | 2023-02-08 | PDF 383.4 KB |
| Letter of Declaration on Indoor Access Point Op | Attestation Statements | 2023-02-08 | PDF 287.5 KB |
| Access Point Operation Letter | Attestation Statements | 2022-03-25 | PDF 172.8 KB |
| C2PC Letter | Cover Letter(s) | 2026-05-14 | PDF 60.8 KB |
| Confidentiality Letter | Cover Letter(s) | 2026-05-14 | PDF 64 KB |
| POA Letter | Cover Letter(s) | 2026-05-14 | PDF 60.9 KB |
| C2PC Letter | Cover Letter(s) | 2023-02-08 | PDF 280 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2023-02-08 | PDF 301.9 KB |
| POA | Cover Letter(s) | 2023-02-08 | PDF 283.3 KB |
| TPC Declaration Letter | Cover Letter(s) | 2023-02-08 | PDF 285.7 KB |
| C2PC Letter | Cover Letter(s) | 2022-05-17 | PDF 82.1 KB |
| Confidentiality Letter | Cover Letter(s) | 2022-05-17 | PDF 385.4 KB |
| Dec Letter on Indoor Access Point Op | Cover Letter(s) | 2022-05-17 | PDF 52.7 KB |
| POA Letter | Cover Letter(s) | 2022-05-17 | PDF 49.9 KB |
| Professional Installation Dec Letter | Cover Letter(s) | 2022-05-17 | PDF 51.7 KB |
| Professional Installation Dec Ltr | Cover Letter(s) | 2022-05-17 | PDF 51.7 KB |
| TPC Dec Letter | Cover Letter(s) | 2022-05-17 | PDF 51.1 KB |
| Access Point Operation Letter Metadata only | Cover Letter(s) | 2022-03-25 | PDF 301.3 KB |
| Confidentiality Letter | Cover Letter(s) | 2022-03-25 | PDF 253.7 KB |
| Indoor Access Point Letter | Cover Letter(s) | 2022-03-25 | PDF 301.3 KB |
| Indoor Access Point Operation Letter | Cover Letter(s) | 2022-03-25 | PDF 301.3 KB |
| POA Letter | Cover Letter(s) | 2022-03-25 | PDF 162.9 KB |
| Professional Install Declaration Letter | Cover Letter(s) | 2022-03-25 | PDF 172.8 KB |
| Professional Installation Decclaration | Cover Letter(s) | 2022-03-25 | PDF 172.8 KB |
| SDOC Lette | Cover Letter(s) | 2022-03-25 | PDF 358.2 KB |
| SDOC Letter | Cover Letter(s) | 2022-03-25 | PDF 358.2 KB |
| RF Exposure MPE | RF Exposure Info | 2026-05-14 | PDF 604.1 KB |
| MPE Report | RF Exposure Info | 2023-02-08 | PDF 584.2 KB |
| RF Exposure MPE | RF Exposure Info | 2022-05-17 | PDF 622.2 KB |
| MPE Report | RF Exposure Info | 2022-03-25 | PDF 400.5 KB |
| RF Exposure MPE Metadata only | RF Exposure Info | PDF 622.9 KB | |
| User Manual Metadata only | Users Manual | 2026-11-10 | PDF 2.8 MB |
| Internal Photos Part 1 Metadata only | Internal Photos | 2026-11-10 | PDF 5.3 MB |
| Internal Photos Part 2 Metadata only | Internal Photos | 2026-11-10 | PDF 5.4 MB |
| Internal Photos Part 3 Metadata only | Internal Photos | 2026-11-10 | PDF 3.5 MB |
| External Photos Metadata only | External Photos | 2026-11-10 | PDF 2.1 MB |
| Geolocation General Description Metadata only | Operational Description | 2026-11-10 | PDF 85.8 KB |
| Antenna Photos 1-8 Metadata only | Test Setup Photos | 2026-11-10 | PDF 276.2 KB |
| Antenna Photos 9-15 Metadata only | Test Setup Photos | 2026-11-10 | PDF 337.7 KB |
| TSUP 6GHz Metadata only | Test Setup Photos | 2026-11-10 | PDF 915 KB |
| Block Diagram Metadata only | Block Diagram | PDF 576.3 KB | |
| Schematics Metadata only | Schematics | PDF 1.2 MB | |
| Geolocation Justification Report Metadata only | Operational Description | PDF 2.2 MB | |
| Op Desc Antenna Metadata only | Operational Description | PDF 4.8 MB | |
| Op Desc Inquiry to FCC Metadata only | Operational Description | PDF 279.5 KB | |
| Operation Description Metadata only | Operational Description | PDF 190.3 KB | |
| Operational Description Metadata only | Operational Description | PDF 119.3 KB | |
| Operational Description Metadata only | Operational Description | PDF 190.3 KB | |
| Operational Description Software Security Metadata only | SDR Software/Security Inf | PDF 159.4 KB | |
| PIA Acceptance Letter Metadata only | Operational Description | PDF 225.7 KB | |
| PIA Inquiry Submission Metadata only | Operational Description | PDF 717.1 KB | |
| Op Desc Software Security Metadata only | SDR Software/Security Inf | PDF 159.4 KB | |
| Op Desc Software Security Metadata only | SDR Software/Security Info. | PDF 102.1 KB | |
| SW Security Statement Metadata only | SDR Software/Security Inf | PDF 159.4 KB |
Application Information
| Application ID | e/RfF3TSkAjfPeh2n20cwg== |
|---|---|
| Final Action Date | 2026-05-14 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0025216375 |
| Model | AP45 |
| Frequency Range | 5955-7095 MHz |
| Equipment Class | 6ID - 15E 6 GHz Low Power Indoor Access Point |
| Device Description | 802.11ax 6E Wireless Access Point |
| Responsible Party | Josh Rosenthal, jrosenthal@juniper.net , +1(669)298-7889 |
| Non-Technical Contact | Josh Rosenthal, Juniper Networks, Inc., jrosenthal@juniper.net , (669) 298-7889 |
| Test Firm | Alex Chen, Sporton International Inc. Hsinchu Laboratory, alex@sporton.com.tw  , 886-3-327-3456 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Long-Term Confidentiality | Yes |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| e/RfF3TSkAjfPeh2n20cwg== | 2026-05-14 | Class II permissive change or modification of presently authorized equipment |
| advuM70e6jZcvBT4a8Po+Q== | 2026-05-14 | Original Equipment |
| O47jHn3C0gDTlLd/zv635A== | 2026-05-14 | Class II permissive change or modification of presently authorized equipment |
| IBUpYmSWlpI41jXOyVxJlA== | 2026-05-14 | Class II permissive change or modification of presently authorized equipment |
| tBwWOwjgR9DT+hcieHFxWA== | 2023-02-08 | Class II permissive change or modification of presently authorized equipment |
| GRHlVMZUqRBaLmw46I0cRw== | 2023-02-08 | Class II permissive change or modification of presently authorized equipment |
| 5rFPdqnQuQNQc78fZLYkOg== | 2023-02-08 | Class II permissive change or modification of presently authorized equipment |
| lG1er+MPEEwhRQavoSf4rA== | 2022-06-13 | Class II permissive change or modification of presently authorized equipment |
| h5+q0fNEC5M8Yl5B04QYpw== | 2022-06-13 | Class II permissive change or modification of presently authorized equipment |
| 5b88VHJRn8H2VkXGQHRG8g== | 2022-06-13 | Class II permissive change or modification of presently authorized equipment |
| 8a+FMq8P9Fu07bRAmXsFig== | 2022-03-25 | Original Equipment |
| 5RNinh0+0H+RkY1FWo9I4w== | 2022-03-25 | Original Equipment |
| 3B1ervXHC/e1gc65YyjPQg== | 2022-03-25 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application tBwWOwjgR9DT+hcieHFxWA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/08/2023 Application Dated: 12/07/2022 |
| Juniper Networks, Inc. |
| 1133 Innovation Way |
| Sunnyvale, CA 94089 |
| Attention: Josh Rosenthal , Hardware Engineering Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHBN-AP45 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ax 6E Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.635 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.249 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.244 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.508 |
| Output Power listed is the maximum combined conducted output power. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 50 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40 and 80 MHz modes. Device is intended for indoor use only. Class II Permissive Change: Enables master-mode operation in U-NII Bands 2A and 2C for Models AP45 and AP45E as described in this filing. Also enables Wi-Fi 6E for Model AP45. Also adds antenna configurations for Model AP45E. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application tBwWOwjgR9DT+hcieHFxWA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 United States |
Date of Grant: 02/08/2023 Application Dated: 12/07/2022 |
| Attention: Josh Rosenthal , Hardware Engineering Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHBN-AP45 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ax 6E Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.635 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.249 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.244 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.508 |
| Output Power listed is the maximum combined conducted output power. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 50 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40 and 80 MHz modes. Device is intended for indoor use only. Class II Permissive Change: Enables master-mode operation in U-NII Bands 2A and 2C for Models AP45 and AP45E as described in this filing. Also enables Wi-Fi 6E for Model AP45. Also adds antenna configurations for Model AP45E. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
IIA Lab Services, LLC 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 05/14/2026 Application Dated: 05/04/2026 |
| Juniper Networks, Inc. |
| 1133 Innovation Way |
| Sunnyvale, CA 94089 |
| Attention: Josh Rosenthal , Hardware Engineering Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHBN-AP45 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ax 6E Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.635 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.249 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.244 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.508 |
| Output Power listed is the maximum combined conducted output power. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 69 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40 and 80 MHz modes. Device is intended for indoor use only. This device is limited to indoor operation only. Class II Permissive Change: Addition of Standard Power Access Point mode changed the minimum separation required for RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
TCB Grant - Application lG1er+MPEEwhRQavoSf4rA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 05/17/2022 Application Dated: 05/11/2022 |
| Juniper Networks, Inc. |
| 1133 Innovation Way |
| Sunnyvale, CA 94089 |
| Attention: Josh Rosenthal , Hardware Engineering Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHBN-AP45 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ax 6E Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.951 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.006 |
| Output Power listed is the maximum combined conducted output power. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 50 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 and 40 MHz bandwidth modes. Device is intended for indoor use only. Class II Permissive Change: Enables master-mode operation in U-NII Bands 2A and 2C and Wi-Fi 6E for Models AP45 and AP45E as described in this filing. Also adds antenna configurations for Model AP45E. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application lG1er+MPEEwhRQavoSf4rA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 United States |
Date of Grant: 05/17/2022 Application Dated: 05/11/2022 |
| Attention: Josh Rosenthal , Hardware Engineering Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHBN-AP45 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ax 6E Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.951 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.006 |
| Output Power listed is the maximum combined conducted output power. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 50 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 and 40 MHz bandwidth modes. Device is intended for indoor use only. Class II Permissive Change: Enables master-mode operation in U-NII Bands 2A and 2C and Wi-Fi 6E for Models AP45 and AP45E as described in this filing. Also adds antenna configurations for Model AP45E. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
IIA Lab Services, LLC 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 05/14/2026 Application Dated: 05/04/2026 |
| Juniper Networks, Inc. |
| 1133 Innovation Way |
| Sunnyvale, CA 94089 |
| Attention: Josh Rosenthal , Hardware Engineering Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHBN-AP45 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ax 6E Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.951 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.006 |
| Output Power listed is the maximum combined conducted output power. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 69 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 and 40 MHz bandwidth modes. Device is intended for indoor use only. This device is limited to indoor operation only. Class II Permissive Change: Addition of Standard Power Access Point mode changed the minimum separation required for RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application h5+q0fNEC5M8Yl5B04QYpw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 05/17/2022 Application Dated: 05/11/2022 |
| Juniper Networks, Inc. |
| 1133 Innovation Way |
| Sunnyvale, CA 94089 |
| Attention: Josh Rosenthal , Hardware Engineering Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHBN-AP45 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | 15E 6 GHz Low Power Indoor Access Point |
| Notes: | 802.11ax 6E Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7095.0 | 0.248 |
| Power listed is EIRP. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 50 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Device is intended for indoor use only. Class II Permissive Change: Enables master-mode operation in U-NII Bands 2A and 2C and Wi-Fi 6E for Models AP45 and AP45E as described in this filing. Also adds antenna configurations for Model AP45E. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application h5+q0fNEC5M8Yl5B04QYpw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 United States |
Date of Grant: 05/17/2022 Application Dated: 05/11/2022 |
| Attention: Josh Rosenthal , Hardware Engineering Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHBN-AP45 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | 15E 6 GHz Low Power Indoor Access Point |
| Notes: | 802.11ax 6E Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7095.0 | 0.248 |
| Power listed is EIRP. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 50 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Device is intended for indoor use only. Class II Permissive Change: Enables master-mode operation in U-NII Bands 2A and 2C and Wi-Fi 6E for Models AP45 and AP45E as described in this filing. Also adds antenna configurations for Model AP45E. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/08/2023 Application Dated: 12/06/2022 |
| Juniper Networks, Inc. |
| 1133 Innovation Way |
| Sunnyvale, CA 94089 |
| Attention: Josh Rosenthal , Hardware Engineering Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHBN-AP45 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | 15E 6 GHz Low Power Indoor Access Point |
| Notes: | 802.11ax 6E Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7095.0 | 0.248 |
| Power listed is EIRP. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 50 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Device is intended for indoor use only. Class II Permissive Change: Enables master-mode operation in U-NII Bands 2A and 2C for Models AP45 and AP45E as described in this filing. Also enables Wi-Fi 6E for Model AP45. Also adds antenna configurations for Model AP45E. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application GRHlVMZUqRBaLmw46I0cRw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 United States |
Date of Grant: 02/08/2023 Application Dated: 12/06/2022 |
| Attention: Josh Rosenthal , Hardware Engineering Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHBN-AP45 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | 15E 6 GHz Low Power Indoor Access Point |
| Notes: | 802.11ax 6E Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7095.0 | 0.248 |
| Power listed is EIRP. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 50 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Device is intended for indoor use only. Class II Permissive Change: Enables master-mode operation in U-NII Bands 2A and 2C for Models AP45 and AP45E as described in this filing. Also enables Wi-Fi 6E for Model AP45. Also adds antenna configurations for Model AP45E. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
IIA Lab Services, LLC 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 05/14/2026 Application Dated: 05/04/2026 |
| Juniper Networks, Inc. |
| 1133 Innovation Way |
| Sunnyvale, CA 94089 |
| Attention: Josh Rosenthal , Hardware Engineering Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHBN-AP45 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | 15E 6 GHz Low Power Indoor Access Point |
| Notes: | 802.11ax 6E Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7095.0 | 0.248 |
| Power listed is EIRP. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 69 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Device is intended for indoor use only. Device does not support external antennas for 6 GHz operation. This device is limited to indoor operation only. Class II Permissive Change: Addition of Standard Power Access Point mode changed the minimum separation required for RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application advuM70e6jZcvBT4a8Po+Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
IIA Lab Services, LLC 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 05/14/2026 Application Dated: 05/04/2026 |
| Juniper Networks, Inc. |
| 1133 Innovation Way |
| Sunnyvale, CA 94089 |
| Attention: Josh Rosenthal , Hardware Engineering Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHBN-AP45 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | 15E 6 GHz Standard Power Access Point |
| Notes: | 802.11ax 6E Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BX CC EP MO | 15E | 5955.0 - 6415.0 | 3.819 | ||
| BX CC EP MO | 15E | 6535.0 - 6855.0 | 3.681 |
| Power listed is EIRP. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas used for this device must be installed to provide a separation distance of at least 69 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Device operation is limited to indoor use only. |
| BX: | This standard power access point is authorized as a composite under 47 CFR 15.407(a)(4) and an indoor access point under 47 CFR 15.407(a)(5), allowing the AFCs that are issued waiver FCC 24-1217 to consider up to 6 dB of building entry loss (BEL). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application 8a+FMq8P9Fu07bRAmXsFig==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/25/2022 Application Dated: 02/25/2022 |
| Juniper Networks, Inc. |
| 1133 Innovation Way |
| Sunnyvale, CA 94089 |
| Attention: Josh Rosenthal , Hardware Engineering Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHBN-AP45 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | 15E 6 GHz Low Power Indoor Access Point |
| Notes: | 802.11ax 6E Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7095.0 | 0.248 |
| Power listed is EIRP. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 26 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Device is intended for indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 8a+FMq8P9Fu07bRAmXsFig==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 United States |
Date of Grant: 03/25/2022 Application Dated: 02/25/2022 |
| Attention: Josh Rosenthal , Hardware Engineering Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHBN-AP45 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | 15E 6 GHz Low Power Indoor Access Point |
| Notes: | 802.11ax 6E Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7095.0 | 0.248 |
| Power listed is EIRP. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 26 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Device is intended for indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/25/2022 Application Dated: 02/25/2022 |
| Juniper Networks, Inc. |
| 1133 Innovation Way |
| Sunnyvale, CA 94089 |
| Attention: Josh Rosenthal , Hardware Engineering Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHBN-AP45 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ax 6E Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.635 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.508 |
| Output Power listed is the maximum combined conducted output power. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 26 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40 and 80 MHz modes. Device is intended for indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 5RNinh0+0H+RkY1FWo9I4w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 United States |
Date of Grant: 03/25/2022 Application Dated: 02/25/2022 |
| Attention: Josh Rosenthal , Hardware Engineering Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHBN-AP45 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ax 6E Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.635 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.508 |
| Output Power listed is the maximum combined conducted output power. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 26 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40 and 80 MHz modes. Device is intended for indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/08/2023 Application Dated: 12/07/2022 |
| Juniper Networks, Inc. |
| 1133 Innovation Way |
| Sunnyvale, CA 94089 |
| Attention: Josh Rosenthal , Hardware Engineering Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHBN-AP45 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ax 6E Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.951 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.006 |
| Output Power listed is the maximum combined conducted output power. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 50 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 and 40 MHz bandwidth modes. Device is intended for indoor use only. Class II Permissive Change: Enables master-mode operation in U-NII Bands 2A and 2C for Models AP45 and AP45E as described in this filing. Also enables Wi-Fi 6E for Model AP45. Also adds antenna configurations for Model AP45E. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 5rFPdqnQuQNQc78fZLYkOg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 United States |
Date of Grant: 02/08/2023 Application Dated: 12/07/2022 |
| Attention: Josh Rosenthal , Hardware Engineering Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHBN-AP45 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ax 6E Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.951 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.006 |
| Output Power listed is the maximum combined conducted output power. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 50 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 and 40 MHz bandwidth modes. Device is intended for indoor use only. Class II Permissive Change: Enables master-mode operation in U-NII Bands 2A and 2C for Models AP45 and AP45E as described in this filing. Also enables Wi-Fi 6E for Model AP45. Also adds antenna configurations for Model AP45E. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 05/17/2022 Application Dated: 05/11/2022 |
| Juniper Networks, Inc. |
| 1133 Innovation Way |
| Sunnyvale, CA 94089 |
| Attention: Josh Rosenthal , Hardware Engineering Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHBN-AP45 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ax 6E Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.635 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.249 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.244 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.508 |
| Output Power listed is the maximum combined conducted output power. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 50 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40 and 80 MHz modes. Device is intended for indoor use only. Class II Permissive Change: Enables master-mode operation in U-NII Bands 2A and 2C and Wi-Fi 6E for Models AP45 and AP45E as described in this filing. Also adds antenna configurations for Model AP45E. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 5b88VHJRn8H2VkXGQHRG8g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 United States |
Date of Grant: 05/17/2022 Application Dated: 05/11/2022 |
| Attention: Josh Rosenthal , Hardware Engineering Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHBN-AP45 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ax 6E Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.635 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.249 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.244 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.508 |
| Output Power listed is the maximum combined conducted output power. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 50 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40 and 80 MHz modes. Device is intended for indoor use only. Class II Permissive Change: Enables master-mode operation in U-NII Bands 2A and 2C and Wi-Fi 6E for Models AP45 and AP45E as described in this filing. Also adds antenna configurations for Model AP45E. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/25/2022 Application Dated: 02/25/2022 |
| Juniper Networks, Inc. |
| 1133 Innovation Way |
| Sunnyvale, CA 94089 |
| Attention: Josh Rosenthal , Hardware Engineering Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHBN-AP45 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ax 6E Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.951 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.006 |
| Output Power listed is the maximum combined conducted output power. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 26 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 and 40 MHz bandwidth modes. Device is intended for indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 3B1ervXHC/e1gc65YyjPQg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 United States |
Date of Grant: 03/25/2022 Application Dated: 02/25/2022 |
| Attention: Josh Rosenthal , Hardware Engineering Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHBN-AP45 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ax 6E Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.951 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.006 |
| Output Power listed is the maximum combined conducted output power. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 26 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 and 40 MHz bandwidth modes. Device is intended for indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |