FCC ID 2AHBN-AP64

802.11ax WiFi6E 2+2+2 Access Point

by Juniper Networks, Inc.

Grantee Code: 2AHBN   Product Code: AP64
Latest application date: 2025-07-10

FCC ID Device Details

FCC ID2AHBN-AP64
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AHBN
Product CodeAP64
Applicant BusinessJuniper Networks, Inc. 🇺🇸
Related Domains juniper.net
Equipment Class802.11ax WiFi6E 2+2+2 Access Point
Test FirmSporton International Inc. Hsinchu Laboratory

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
6535-6855 MHzOriginal Equipment2025-07-10
2402-2480 MHzOriginal Equipment2024-01-11
5180-5240 MHzOriginal Equipment2024-01-11

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2025-07-10PDF 2 MB
User Manual Metadata onlyUsers Manual2024-01-11PDF 1.9 MB
User ManualUsers Manual2024-01-11PDF 1.9 MB
Internal Photos pt. 1Internal Photos2025-07-10PDF 5.8 MB
Internal Photos pt. 2Internal Photos2025-07-10PDF 3.5 MB
Internal PhotosInternal Photos2024-01-11PDF 5.6 MB
External PhotosExternal Photos2025-07-10PDF 755.2 KB
External PhotosExternal Photos2024-01-11PDF 834.1 KB
Label InformationID Label/Location Info2025-07-10PDF 79.3 KB
LabelID Label/Location Info2024-01-11PDF 79.3 KB
OpDes General Description GPSOperational Description2026-01-06PDF 176.4 KB
OpDes General Description Non-GPSOperational Description2026-01-06PDF 86 KB
TSUP 6GTest Setup Photos2025-07-10PDF 1.4 MB
TSUP AntennaTest Setup Photos2025-07-10PDF 413.9 KB
TSUP 2.4GTest Setup Photos2024-01-11PDF 1.7 MB
TSUP 5GTest Setup Photos2024-01-11PDF 1.7 MB
TSUP DFSTest Setup Photos2024-01-11PDF 271.6 KB
TSUP LETest Setup Photos2024-01-11PDF 1.2 MB
TSUP ThreadTest Setup Photos2024-01-11PDF 1.3 MB
TSUP ZBTest Setup Photos2024-01-11PDF 1.3 MB
Tsup AntennaTest Setup Photos2024-01-11PDF 413.9 KB
Antenna ReportTest Report2025-07-10PDF 3.6 MB
Test Report 6G pt. 1Test Report2025-07-10PDF 5.7 MB
Test Report 6G pt. 2Test Report2025-07-10PDF 2.9 MB
Test Report AFCTest Report2025-07-10PDF 2 MB
Test Report 2.4G Part Metadata onlyTest Report2024-01-11PDF 5.5 MB
Test Report 2.4G Part 1Test Report2024-01-11PDF 5.5 MB
Test Report 2.4G Part 2Test Report2024-01-11PDF 2.4 MB
Test Report 5G Part 1Test Report2024-01-11PDF 5.5 MB
Test Report 5G Part 2Test Report2024-01-11PDF 5.5 MB
Test Report 5G Part 3Test Report2024-01-11PDF 2.6 MB
Test Report AntennaTest Report2024-01-11PDF 3.6 MB
Test Report DFSTest Report2024-01-11PDF 2.7 MB
Test Report LETest Report2024-01-11PDF 3.3 MB
Test Report ThreadTest Report2024-01-11PDF 2.8 MB
Test Report ZGTest Report2024-01-11PDF 2.8 MB
Att Statements 2.911(d)(5)(7)Attestation Statements2025-07-10PDF 261.7 KB
Att Statements 2.911(d)(5)(i)&(ii)Attestation Statements2025-07-10PDF 275.1 KB
Declaration for 6GAttestation Statements2025-07-10PDF 201.4 KB
Attestation Statement part 2.911(d)(7)Attestation Statements2024-01-11PDF 357.8 KB
Attestation Statements Part 2.911(d)(7)Attestation Statements2024-01-11PDF 357.8 KB
Attstn Stmt part 2.911(d)(5)(i)&(ii)Attestation Statements2024-01-11PDF 277.3 KB
Change letterCover Letter(s)2025-07-10PDF 385.9 KB
Confidentiality LetterCover Letter(s)2025-07-10PDF 263.8 KB
POA LetterCover Letter(s)2025-07-10PDF 262.9 KB
Professional Installation InformationCover Letter(s)2025-07-10PDF 261.1 KB
SDoC LetterCover Letter(s)2025-07-10PDF 234.5 KB
Confidential Request LetterCover Letter(s)2024-01-11PDF 277.8 KB
Confidentiality LetterCover Letter(s)2024-01-11PDF 277.8 KB
LOA LetterCover Letter(s)2024-01-11PDF 279.1 KB
Professional Installation LetterCover Letter(s)2024-01-11PDF 364.2 KB
RF Exposure MPERF Exposure Info2025-07-10PDF 548.6 KB
RF Exposure MPERF Exposure Info2024-01-11PDF 556.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 4.3 MB
Block Diagrams Metadata onlyBlock DiagramPDF 4.3 MB
Schematics Part 1 Metadata onlySchematicsPDF 1.9 MB
Schematics Part 2 Metadata onlySchematicsPDF 223.8 KB
Schematics pt. 1 Metadata onlySchematicsPDF 1.9 MB
Schematics pt. 2 Metadata onlySchematicsPDF 223.8 KB
OpDes Justification Report GPS Metadata onlyOperational DescriptionPDF 4.7 MB
OpDes Justification Report Non-GPS Metadata onlyOperational DescriptionPDF 5.8 MB
OpDes PIA Acceptance Letter GPS Metadata onlyOperational DescriptionPDF 224 KB
OpDes PIA Acceptance Letter Non-GPS Metadata onlyOperational DescriptionPDF 227.2 KB
OpDes PIA Inquiry GPA Metadata onlyOperational DescriptionPDF 508.7 KB
OpDes PIA Inquiry Non-GPS Metadata onlyOperational DescriptionPDF 797.9 KB
Operational Description Metadata onlyOperational DescriptionPDF 340.8 KB
Operational Description Metadata onlyOperational DescriptionPDF 1.6 MB
Op Desc Software Security Metadata onlySDR Software/Security Info.PDF 249.5 KB
OpDes Software Security Metadata onlySDR Software/Security Info.PDF 249.5 KB

Application Information

Application IDxMQyVKHFDjq3CGwDiKPmBw==
Final Action Date2025-07-10
Application PurposeOriginal Equipment
Applicant FRN0025216375
ModelAP64
Frequency Range6535-6855 MHz
Equipment Class6SD - 15E 6 GHz Standard Power Access Point
Device Description802.11ax WiFi6E 2+2+2 Access Point
Responsible PartyJosh Rosenthal, Hardware Engineering Director, jrosenthal@juniper.net , +1(669)298-7889
Test FirmAlex Chen, Sporton International Inc. Hsinchu Laboratory, alex@sporton.com.tw , 886-3-327-3456
TCB Emailtei@timcoengr.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date01/06/2026
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsPower listed is EIRP. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes.

Applications

Application IDDatePurpose
xMQyVKHFDjq3CGwDiKPmBw==2025-07-10Original Equipment
kaiJAm8ruZdLocIw2KbJ8g==2024-01-11Original Equipment
S/bC6ECNBv3GIrm5/r45tQ==2024-01-11Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.003215CCC
2405-2475 MHz0.005115CCC
2412-2462 MHz0.216815CCC, MO
5180-5240 MHz0.208515ECC, MO
5260-5320 MHz0.244315ECC, MO, ND
5500-5720 MHz0.216815ECC, MO, ND
5745-5825 MHz0.314115ECC, MO
5955-6415 MHz0.7261CC, EP, MO
6535-6855 MHz0.7465CC, EP, MO

Grants

TCB Grant - Application xMQyVKHFDjq3CGwDiKPmBw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  IIA Lab Services, LLC
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 07/10/2025

Application Dated: 07/10/2025
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
 
Attention: Josh Rosenthal , Hardware Engineering Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AHBN-AP64
Name of Grantee:  Juniper Networks, Inc.
Equipment Class: 15E 6 GHz Standard Power Access Point
Notes: 802.11ax WiFi6E 2+2+2 Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  6415.0 0.7261  
CC EP MO 15E 6535.0  -  6855.0 0.7465  

Power listed is EIRP. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application S/bC6ECNBv3GIrm5/r45tQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 01/11/2024

Application Dated: 12/20/2023
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
 
Attention: Josh Rosenthal , Hardware Engineering Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AHBN-AP64
Name of Grantee:  Juniper Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ax WiFi6E 2+2+2 Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.2085  
CC MO ND 15E 5260.0  -  5320.0 0.2443  
CC MO ND 15E 5500.0  -  5720.0 0.2168  
CC MO 15E 5745.0  -  5825.0 0.3141  

Output Power listed is the maximum combined conducted output power. Professional installation is required. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. End-users must be informed of operating requirements for satisfying RF exposure compliance. This device supports 20, 40 and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application S/bC6ECNBv3GIrm5/r45tQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
United States
  Date of Grant: 01/11/2024

Application Dated: 12/20/2023
 
Attention: Josh Rosenthal , Hardware Engineering Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AHBN-AP64
Name of Grantee:  Juniper Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ax WiFi6E 2+2+2 Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.2085  
CC MO ND 15E 5260.0  -  5320.0 0.2443  
CC MO ND 15E 5500.0  -  5720.0 0.2168  
CC MO 15E 5745.0  -  5825.0 0.3141  

Output Power listed is the maximum combined conducted output power. Professional installation is required. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. End-users must be informed of operating requirements for satisfying RF exposure compliance. This device supports 20, 40 and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application kaiJAm8ruZdLocIw2KbJ8g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 01/11/2024

Application Dated: 12/20/2023
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
 
Attention: Josh Rosenthal , Hardware Engineering Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AHBN-AP64
Name of Grantee:  Juniper Networks, Inc.
Equipment Class: Digital Transmission System
Notes: 802.11ax WiFi6E 2+2+2 Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0032  
CC 15C 2405.0  -  2475.0 0.0051  
CC MO 15C 2412.0  -  2462.0 0.2168  

Output Power listed is the maximum combined conducted output power. Professional installation is required. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. End-users must be informed of operating requirements for satisfying RF exposure compliance. This device supports 20 and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application kaiJAm8ruZdLocIw2KbJ8g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
United States
  Date of Grant: 01/11/2024

Application Dated: 12/20/2023
 
Attention: Josh Rosenthal , Hardware Engineering Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AHBN-AP64
Name of Grantee:  Juniper Networks, Inc.
Equipment Class: Digital Transmission System
Notes: 802.11ax WiFi6E 2+2+2 Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0032  
CC 15C 2405.0  -  2475.0 0.0051  
CC MO 15C 2412.0  -  2462.0 0.2168  

Output Power listed is the maximum combined conducted output power. Professional installation is required. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. End-users must be informed of operating requirements for satisfying RF exposure compliance. This device supports 20 and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: