FCC ID 2AHI8-XB900HP

XBEE 900 HP

by Mirion Technologies (RADOS) Oy

Grantee Code: 2AHI8   Product Code: XB900HP
Latest application date: 2021-05-25

FCC ID Device Details

FCC ID2AHI8-XB900HP
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AHI8
Product CodeXB900HP
Applicant BusinessMirion Technologies (RADOS) Oy 🇫🇮
Related Domains mirion.com
Equipment ClassXBEE 900 HP
Test FirmSGS Fimko Oy

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.4-927.6 MHzClass II permissive change or modification of presently authorized equipment2021-05-25
902.4-927.6 MHzChange in identification of presently authorized equipment. Original FCC ID: MCQ-XB900HP Grant Date: 09/14/20122021-05-06

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2021-05-06PDF 765.6 KB
External PhotosExternal Photos2021-05-06PDF 292.4 KB
Lable InformationID Label/Location Info2021-05-06PDF 220.4 KB
R & D Test ReportTest Report2021-05-25PDF 376 KB
Agent Authorization LetterCover Letter(s)2021-05-25PDF 305.3 KB
Applicant Declaration LetterCover Letter(s)2021-05-25PDF 530.1 KB
Authorization of Change in IDCover Letter(s)2021-05-06PDF 158.9 KB
Cover letterCover Letter(s)2021-05-06PDF 212.7 KB
FCC ID Cover LetterCover Letter(s)2021-05-06PDF 212.7 KB

Application Information

Application IDk4W7scNO1grHRbtQJCpGeQ==
Final Action Date2021-05-25
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0025332966
ModelXB900HP
Frequency Range902.4-927.6 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionXBEE 900 HP
Responsible PartyLauri Soisalo, Managing Director, lsoisalo@mirion.com , +35824684613
AgentMarkus Markus Markus, Mirion Technologies (RADOS) Oy, mwallasvaara@mirion.com , 35824684626
Technical ContactMarkus Wallasvaara, Mirion Technologies (RADOS) Oy, mwallasvaara@mirion.com , 35824684626
Non-Technical ContactMarkus Wallasvaara, Mirion Technologies (RADOS) Oy, mwallasvaara@mirion.com , 35824684626
Test FirmJanne Nyman, SGS Fimko Oy, janne.nyman@sgs.eom , +358 9 696 361
TCB Emailuscts.tcb@sgs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. C2PC to add portable use case within a specific host as documented in this filing. The minimum separation distance between the antenna and the user shall be 3.2 mm.

Applications

Application IDDatePurpose
k4W7scNO1grHRbtQJCpGeQ==2021-05-25Class II permissive change or modification of presently authorized equipment
1Jw0OW2dMrmI0BJ3ta+NyA==2021-05-06Change in identification of presently authorized equipment. Original FCC ID: MCQ-XB900HP Grant Date: 09/14/2012

Equipment Authorization

FrequencyOutputRulesGrant Notes
902.4-927.6 MHz0.298000015C20

Grants

TCB Grant - Application k4W7scNO1grHRbtQJCpGeQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 05/25/2021

Application Dated: 05/25/2021
Mirion Technologies (RADOS) Oy
Mustionkatu 2
P.O. Box 506,
Turku, 20101
Finland
 
Attention: Lauri Soisalo , Managing Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AHI8-XB900HP
Name of Grantee:  Mirion Technologies (RADOS) Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: XBEE 900 HP
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 15C 902.4  -  927.6 0.298  

Power output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. C2PC to add portable use case within a specific host as documented in this filing. The minimum separation distance between the antenna and the user shall be 3.2 mm.

20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

EAS Grant - Application k4W7scNO1grHRbtQJCpGeQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mirion Technologies (RADOS) Oy
Mustionkatu 2 P.O. Box 506,
Turku, 20101
Finland
  Date of Grant: 05/25/2021

Application Dated: 05/25/2021
 
Attention: Lauri Soisalo , Managing Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AHI8-XB900HP
Name of Grantee:  Mirion Technologies (RADOS) Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: XBEE 900 HP
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 15C 902.4  -  927.6 0.298  

Power output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. C2PC to add portable use case within a specific host as documented in this filing. The minimum separation distance between the antenna and the user shall be 3.2 mm.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

TCB Grant - Application 1Jw0OW2dMrmI0BJ3ta+NyA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 05/06/2021

Application Dated: 05/06/2021
Mirion Technologies (RADOS) Oy
Mustionkatu 2
P.O. Box 506,
Turku, 20101
Finland
 
Attention: Lauri Soisalo , Managing Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AHI8-XB900HP
Name of Grantee:  Mirion Technologies (RADOS) Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: XBEE 900 HP
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 15C 902.4  -  927.6 0.298  

Power output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

EAS Grant - Application 1Jw0OW2dMrmI0BJ3ta+NyA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mirion Technologies (RADOS) Oy
Mustionkatu 2 P.O. Box 506,
Turku, 20101
Finland
  Date of Grant: 05/06/2021

Application Dated: 05/06/2021
 
Attention: Lauri Soisalo , Managing Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AHI8-XB900HP
Name of Grantee:  Mirion Technologies (RADOS) Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: XBEE 900 HP
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 15C 902.4  -  927.6 0.298  

Power output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

Mail To: