FCC ID 2AHJMCMFAAH

Walkie Talkie Two-way Radio

by Altis Technology (Hong Kong) Ltd.

Grantee Code: 2AHJM   Product Code: CMFAAH
Latest application date: 2019-05-10

FCC ID Device Details

FCC ID2AHJMCMFAAH
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AHJM
Product CodeCMFAAH
Applicant BusinessAltis Technology (Hong Kong) Ltd. 🇨🇳
Related Domains elitecorp.com
Equipment ClassWalkie Talkie Two-way Radio
Test FirmShenzhen LCS Compliance Testing Laboratory Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
462.55-462.725 MHzOriginal Equipment2019-05-10

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2019-05-10PDF 2 MB
Internal PhotosInternal Photos2019-05-10PDF 456.1 KB
External PhotosExternal Photos2019-05-10PDF 402.7 KB
LabelID Label/Location Info2019-05-10PDF 541 KB
Test Setup PhotosTest Setup Photos2019-05-10PDF 150.8 KB
Part 95 Test ReportTest Report2019-05-10PDF 1,013.2 KB
Conf-letterCover Letter(s)2019-05-10PDF 22.1 KB
Declaration Letter of Model DifferenceCover Letter(s)2019-05-10PDF 58.3 KB
Declaration-Letter-of-SDoC-procedureCover Letter(s)2019-05-10PDF 58.2 KB
POA_LetterCover Letter(s)2019-05-10PDF 19.9 KB
SAR REPORTRF Exposure Info2019-05-10PDF 4.1 MB
Tune up ProcedureParts List/Tune Up Info2019-05-10PDF 10.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 69.3 KB
Schematics Metadata onlySchematicsPDF 401.5 KB
Circuit Descirption Metadata onlyOperational DescriptionPDF 138.3 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 87.9 KB

Application Information

Application IDziLdwKFgkS3v5M+QlQsqbw==
Final Action Date2019-05-10
Application PurposeOriginal Equipment
Applicant FRN0025343575
ModelCMFAAH
Frequency Range462.55-462.725 MHz
Equipment ClassFRF - Part 95 Family Radio Face Held Transmitter
Device DescriptionWalkie Talkie Two-way Radio
Responsible PartyBensive Wong, Operations Director, bensive.wong@elitecorp.com , +852-27971111
Test FirmGavin Liang, Shenzhen LCS Compliance Testing Laboratory Ltd., gavin.liang@lcs-cert.com , 0755-82591330
TCB Emailtei@timcoengr.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is ERP. This device has been tested for SAR compliance for use at the face and in body-worn configurations. SAR compliance for body-worn operating configurations is limited to the specific belt-clip tested for this filing. The end-users must be informed of the operating requirements for satisfying RF exposure compliance. To ensure compliance with FCC RF exposure requirements, operation of this device may not exceed a maximum transmitting duty factor of 50%. This device is authorized to operate in the FRS radio service. The highest reported SAR values for head, and body-worn accessory use conditions are 0.22 W/kg, and 0.38 W/kg, respectively.

Applications

Application IDDatePurpose
ziLdwKFgkS3v5M+QlQsqbw==2019-05-10Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
462.55-462.725 MHz0.48981.28ppm11K0F3E95B
467.563-467.713 MHz0.47421.27ppm11K0F3E95B

Grants

TCB Grant - Application ziLdwKFgkS3v5M+QlQsqbw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 05/10/2019

Application Dated: 05/10/2019
Altis Technology (Hong Kong) Ltd.
26/F, Rykadan Capital Tower, 135 Hoi Bun Road,
Kwun Tong
Hong Kong,
China
 
Attention: Bensive Wong , Operations Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AHJMCMFAAH
Name of Grantee:  Altis Technology (Hong Kong) Ltd.
Equipment Class: Part 95 Family Radio Face Held Transmitter
Notes: Walkie Talkie Two-way Radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
95B 462.55  -  462.725 0.4898 1.28  PM 11K0F3E
95B 467.5625  -  467.7125 0.4742 1.27  PM 11K0F3E

Output power listed is ERP. This device has been tested for SAR compliance for use at the face and in body-worn configurations. SAR compliance for body-worn operating configurations is limited to the specific belt-clip tested for this filing. The end-users must be informed of the operating requirements for satisfying RF exposure compliance. To ensure compliance with FCC RF exposure requirements, operation of this device may not exceed a maximum transmitting duty factor of 50%. This device is authorized to operate in the FRS radio service. The highest reported SAR values for head, and body-worn accessory use conditions are 0.22 W/kg, and 0.38 W/kg, respectively.

EAS Grant - Application ziLdwKFgkS3v5M+QlQsqbw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Altis Technology (Hong Kong) Ltd.
26/F, Rykadan Capital Tower, 135 Hoi Bun Road, Kwun Tong
Hong Kong,
China
  Date of Grant: 05/10/2019

Application Dated: 05/10/2019
 
Attention: Bensive Wong , Operations Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AHJMCMFAAH
Name of Grantee:  Altis Technology (Hong Kong) Ltd.
Equipment Class: Part 95 Family Radio Face Held Transmitter
Notes: Walkie Talkie Two-way Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
95B 462.55  -  462.725 0.4898 1.28  PM 11K0F3E
95B 467.5625  -  467.7125 0.4742 1.27  PM 11K0F3E

Output power listed is ERP. This device has been tested for SAR compliance for use at the face and in body-worn configurations. SAR compliance for body-worn operating configurations is limited to the specific belt-clip tested for this filing. The end-users must be informed of the operating requirements for satisfying RF exposure compliance. To ensure compliance with FCC RF exposure requirements, operation of this device may not exceed a maximum transmitting duty factor of 50%. This device is authorized to operate in the FRS radio service. The highest reported SAR values for head, and body-worn accessory use conditions are 0.22 W/kg, and 0.38 W/kg, respectively.



Mail To: