FCC ID 2AHRD-EPEP9655
Bluetooth PCI-E WiFi Card
by Shenzhen EDUP Electronics Technology Co.,Ltd.
Grantee Code: 2AHRD Product Code: EPEP9655
Latest application date: 2022-03-04
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2022-03-04 |
| 2402-2480 MHz | Original Equipment | 2022-03-04 |
| 5180-5240 MHz | Original Equipment | 2022-03-04 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2022-03-04 | PDF 27.8 KB |
| User Manual | Users Manual | 2022-03-04 | PDF 1.1 MB |
| user manual | Users Manual | 2022-03-04 | PDF 1.1 MB |
| user manual | Users Manual | 2022-03-04 | PDF 27.8 KB |
| Internal Photos | Internal Photos | 2022-03-04 | PDF 1.5 MB |
| Internal photos | Internal Photos | 2022-03-04 | PDF 1.5 MB |
| External Photo | External Photos | 2022-03-04 | PDF 1.2 MB |
| External photo | External Photos | 2022-03-04 | PDF 1.2 MB |
| Label | ID Label/Location Info | 2022-03-04 | PDF 171.5 KB |
| Label Location | ID Label/Location Info | 2022-03-04 | PDF 171.5 KB |
| Label and location | ID Label/Location Info | 2022-03-04 | PDF 171.5 KB |
| Test Setup Photos | Test Setup Photos | 2022-03-04 | PDF 589.3 KB |
| Test Setup photo | Test Setup Photos | 2022-03-04 | PDF 589.3 KB |
| Test setup photo | Test Setup Photos | 2022-03-04 | PDF 589.3 KB |
| Test Report | Test Report | 2022-03-04 | PDF 4.8 MB |
| Test Report | Test Report | 2022-03-04 | PDF 3.2 MB |
| Test Report | Test Report | 2022-03-04 | PDF 4.1 MB |
| Agent Authorization Rev 1.0 | Cover Letter(s) | 2022-03-04 | PDF 22.3 KB |
| Declaration Document | Cover Letter(s) | 2022-03-04 | PDF 45.8 KB |
| Declaration on Model Differences | Cover Letter(s) | 2022-03-04 | PDF 45.8 KB |
| Difference Description | Cover Letter(s) | 2022-03-04 | PDF 45.8 KB |
| FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2022-03-04 | PDF 82.6 KB |
| FCC Software Configuration Control Declaration Rev1.0 | Cover Letter(s) | 2022-03-04 | PDF 82.2 KB |
| MPE | RF Exposure Info | 2022-03-04 | PDF 1.1 MB |
| RF Exposure | RF Exposure Info | 2022-03-04 | PDF 1.1 MB |
| Block Metadata only | Block Diagram | PDF 78.2 KB | |
| BlockDiagram Metadata only | Block Diagram | PDF 78.2 KB | |
| SCH Metadata only | Schematics | PDF 519.3 KB | |
| OP Metadata only | Operational Description | PDF 69.6 KB | |
| Operation Description Metadata only | Operational Description | PDF 69.6 KB | |
| SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES Metadata only | SDR Software/Security Inf | PDF 223.4 KB |
Application Information
| Application ID | Tu8VeTz48eQswA1dXLPQ9g== |
|---|---|
| Final Action Date | 2022-03-04 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0025412040 |
| Model | EPEP9655 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Bluetooth PCI-E WiFi Card |
| Responsible Party | Zhou Chunping, Market@edup.cn  , 0755-83648350 |
| Technical Contact | Shenzhen EDUP Electronics Technology Co.,Ltd., market@edup.cn |
| Test Firm | Bovey Yang, SHENZHEN STS TEST SERVICES CO.,LTD., Bovey@stsapp.com  , +86 755-36886288 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Tu8VeTz48eQswA1dXLPQ9g== | 2022-03-04 | Original Equipment |
| BYghAjR6gg44Ke4mAtcfPg== | 2022-03-04 | Original Equipment |
| BItgAOss6fVNgB+u5qwscA== | 2022-03-04 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Tu8VeTz48eQswA1dXLPQ9g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 03/04/2022 Application Dated: 03/04/2022 |
| Shenzhen EDUP Electronics Technology Co.,Ltd. |
| 6 Floor, #6 Building, No.48, Kangzheng Road |
| Liantang Industrial Area, Buji Town |
| Shenzhen, China |
| Attention: Zhou Chunping |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHRD-EPEP9655 |
| Name of Grantee: | Shenzhen EDUP Electronics Technology Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth PCI-E WiFi Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00055 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.14092 |
| Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Tu8VeTz48eQswA1dXLPQ9g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen EDUP Electronics Technology Co.,Ltd. 6 Floor, #6 Building, No.48, Kangzheng Road Liantang Industrial Area, Buji Town Shenzhen, China |
Date of Grant: 03/04/2022 Application Dated: 03/04/2022 |
| Attention: Zhou Chunping |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHRD-EPEP9655 |
| Name of Grantee: | Shenzhen EDUP Electronics Technology Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth PCI-E WiFi Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00055 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.14092 |
| Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 03/04/2022 Application Dated: 03/04/2022 |
| Shenzhen EDUP Electronics Technology Co.,Ltd. |
| 6 Floor, #6 Building, No.48, Kangzheng Road |
| Liantang Industrial Area, Buji Town |
| Shenzhen, China |
| Attention: Zhou Chunping |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHRD-EPEP9655 |
| Name of Grantee: | Shenzhen EDUP Electronics Technology Co.,Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth PCI-E WiFi Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01327 |
| Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application BYghAjR6gg44Ke4mAtcfPg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen EDUP Electronics Technology Co.,Ltd. 6 Floor, #6 Building, No.48, Kangzheng Road Liantang Industrial Area, Buji Town Shenzhen, China |
Date of Grant: 03/04/2022 Application Dated: 03/04/2022 |
| Attention: Zhou Chunping |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHRD-EPEP9655 |
| Name of Grantee: | Shenzhen EDUP Electronics Technology Co.,Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth PCI-E WiFi Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01327 |
| Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 03/04/2022 Application Dated: 03/04/2022 |
| Shenzhen EDUP Electronics Technology Co.,Ltd. |
| 6 Floor, #6 Building, No.48, Kangzheng Road |
| Liantang Industrial Area, Buji Town |
| Shenzhen, China |
| Attention: Zhou Chunping |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHRD-EPEP9655 |
| Name of Grantee: | Shenzhen EDUP Electronics Technology Co.,Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Bluetooth PCI-E WiFi Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.00685 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.10641 |
| Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application BItgAOss6fVNgB+u5qwscA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen EDUP Electronics Technology Co.,Ltd. 6 Floor, #6 Building, No.48, Kangzheng Road Liantang Industrial Area, Buji Town Shenzhen, China |
Date of Grant: 03/04/2022 Application Dated: 03/04/2022 |
| Attention: Zhou Chunping |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AHRD-EPEP9655 |
| Name of Grantee: | Shenzhen EDUP Electronics Technology Co.,Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Bluetooth PCI-E WiFi Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.00685 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.10641 |
| Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |