FCC ID 2AHRH-FJ500M

M2M DATA MODULE

by Positioning Universal Inc

Grantee Code: 2AHRH   Product Code: FJ500M
Latest application date: 2019-06-05

FCC ID Device Details

FCC ID2AHRH-FJ500M
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AHRH
Product CodeFJ500M
Applicant BusinessPositioning Universal Inc 🇺🇸
Related Domains positioninguniversal.com
Equipment ClassM2M DATA MODULE
Test FirmSporton International (Kunshan) Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
701.5-713.5 MHzClass II permissive change or modification of presently authorized equipment2019-06-05
701.5-713.5 MHzChange in identification of presently authorized equipment. Original FCC ID: NKRIMA2A Grant Date: 09/25/20182019-05-30

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2019-12-02PDF 732.4 KB
Internal PhotosInternal Photos2019-12-02PDF 2.3 MB
Internal PhotosInternal Photos2019-05-30PDF 572 KB
External PhotosExternal Photos2019-12-02PDF 1 MB
External PhotosExternal Photos2019-05-30PDF 2.2 MB
Label InfoID Label/Location Info2019-06-05PDF 84 KB
Label LocationID Label/Location Info2019-06-05PDF 104.4 KB
LabelID Label/Location Info2019-05-30PDF 83.3 KB
Test Setup Photos PCE LTETest Setup Photos2019-12-02PDF 238.1 KB
Test Report PCE LTETest Report2019-06-05PDF 2.6 MB
Class II Permissive Change LetterCover Letter(s)2019-06-05PDF 775.6 KB
Long-term Confidential Request LetterCover Letter(s)2019-06-05PDF 655.6 KB
POACover Letter(s)2019-06-05PDF 865.5 KB
Short-term Confidential Request LetterCover Letter(s)2019-06-05PDF 754 KB
Application Letter from ApplicantCover Letter(s)2019-05-30PDF 911.4 KB
Wistron NeWeb Auth Letter to Positioning UniversalCover Letter(s)2019-05-30PDF 348.4 KB
RF Exposure ReportRF Exposure Info2019-06-05PDF 653.7 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 88 KB

Application Information

Application IDTzxn8+KVwg4FdyApfALRoA==
Final Action Date2019-06-05
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0025414095
ModelFJ500M
Frequency Range701.5-713.5 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionM2M DATA MODULE
Responsible PartyEzra T Peachey, COO, timp@positioninguniversal.com , 8583428458
Test FirmJim Tsai, Sporton International (Kunshan) Inc., JimTsai@sporton.com.tw , +86 0512 57900158
TCB Emailtei@timcoengr.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date12/02/2019
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Output power listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons. A maximum antenna gain for stand-alone operation: 5 dBi for LTE Band 2 and Band 4; and 8 dBi for LTE Band 12. A maximum antenna gain when collocated with a WLAN transmitter: 4 dBi for LTE Band 2 and Band 4; and 7 dBi for LTE Band 12. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in this filing, or in accordance with FCC multi-transmitter product guidelines. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations. Class II Permissive Change: This Class II Permissive change is to integrate this module into Positioning Universal Inc. asset tracking device, HMN: FJ500M.

Applications

Application IDDatePurpose
Tzxn8+KVwg4FdyApfALRoA==2019-06-05Class II permissive change or modification of presently authorized equipment
p+Q/Pwp9zjADFiBvbJVrkg==2019-05-30Change in identification of presently authorized equipment. Original FCC ID: NKRIMA2A Grant Date: 09/25/2018

Equipment Authorization

FrequencyOutputToleranceEmissionRules
701.5-713.5 MHz0.23990.0072ppm1M11W7D27
704-711 MHz0.23390.0072ppm1M11W7D27
704-711 MHz0.21880.0072ppm1M13G7D27
1712.5-1752.5 MHz0.24890.0151ppm1M11W7D27
1715-1750 MHz0.23990.0151ppm1M12G7D27
1720-1745 MHz0.22910.0151ppm1M12G7D27
1720-1745 MHz0.24770.0151ppm1M11W7D27
1850.7-1909.3 MHz0.2280.0054ppm1M11G7D24E
1852.5-1907.5 MHz0.24210.0054ppm1M10W7D24E
1860-1900 MHz0.23440.0054ppm1M10W7D24E

Grants

TCB Grant - Application Tzxn8+KVwg4FdyApfALRoA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 06/05/2019

Application Dated: 06/04/2019
Positioning Universal Inc
4660 La Jolla Village Drive
Suite 1100
San Diego, CA 92122
 
Attention: Ezra Peachey , COO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AHRH-FJ500M
Name of Grantee:  Positioning Universal Inc
Equipment Class: PCS Licensed Transmitter
Notes: M2M DATA MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1860.0  -  1900.0 0.2234 0.0054  PM 1M11G7D
24E 1860.0  -  1900.0 0.2344 0.0054  PM 1M10W7D
24E 1850.7  -  1909.3 0.228 0.0054  PM 1M11G7D
24E 1852.5  -  1907.5 0.2421 0.0054  PM 1M10W7D
27 1720.0  -  1745.0 0.2291 0.0151  PM 1M12G7D
27 1720.0  -  1745.0 0.2477 0.0151  PM 1M11W7D
27 1715.0  -  1750.0 0.2399 0.0151  PM 1M12G7D
27 1712.5  -  1752.5 0.2489 0.0151  PM 1M11W7D
27 704.0  -  711.0 0.2188 0.0072  PM 1M13G7D
27 704.0  -  711.0 0.2339 0.0072  PM 1M11W7D
27 701.5  -  713.5 0.2399 0.0072  PM 1M11W7D

Single Modular Approval. Output power listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons. A maximum antenna gain for stand-alone operation: 5 dBi for LTE Band 2 and Band 4; and 8 dBi for LTE Band 12. A maximum antenna gain when collocated with a WLAN transmitter: 4 dBi for LTE Band 2 and Band 4; and 7 dBi for LTE Band 12. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in this filing, or in accordance with FCC multi-transmitter product guidelines. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.

Class II Permissive Change: This Class II Permissive change is to integrate this module into Positioning Universal Inc. asset tracking device, HMN: FJ500M.


EAS Grant - Application Tzxn8+KVwg4FdyApfALRoA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Positioning Universal Inc
4660 La Jolla Village Drive Suite 1100
San Diego, CA 92122
United States
  Date of Grant: 06/05/2019

Application Dated: 06/04/2019
 
Attention: Ezra Peachey , COO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AHRH-FJ500M
Name of Grantee:  Positioning Universal Inc
Equipment Class: PCS Licensed Transmitter
Notes: M2M DATA MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1860.0  -  1900.0 0.2234 0.0054  PM 1M11G7D
24E 1860.0  -  1900.0 0.2344 0.0054  PM 1M10W7D
24E 1850.7  -  1909.3 0.228 0.0054  PM 1M11G7D
24E 1852.5  -  1907.5 0.2421 0.0054  PM 1M10W7D
27 1720.0  -  1745.0 0.2291 0.0151  PM 1M12G7D
27 1720.0  -  1745.0 0.2477 0.0151  PM 1M11W7D
27 1715.0  -  1750.0 0.2399 0.0151  PM 1M12G7D
27 1712.5  -  1752.5 0.2489 0.0151  PM 1M11W7D
27 704.0  -  711.0 0.2188 0.0072  PM 1M13G7D
27 704.0  -  711.0 0.2339 0.0072  PM 1M11W7D
27 701.5  -  713.5 0.2399 0.0072  PM 1M11W7D

Single Modular Approval. Output power listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons. A maximum antenna gain for stand-alone operation: 5 dBi for LTE Band 2 and Band 4; and 8 dBi for LTE Band 12. A maximum antenna gain when collocated with a WLAN transmitter: 4 dBi for LTE Band 2 and Band 4; and 7 dBi for LTE Band 12. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in this filing, or in accordance with FCC multi-transmitter product guidelines. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.

Class II Permissive Change: This Class II Permissive change is to integrate this module into Positioning Universal Inc. asset tracking device, HMN: FJ500M.



TCB Grant - Application p+Q/Pwp9zjADFiBvbJVrkg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 05/30/2019

Application Dated: 05/28/2019
Positioning Universal Inc
4660 La Jolla Village Drive
Suite 1100
San Diego, CA 92122
 
Attention: Ezra Peachey , COO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AHRH-FJ500M
Name of Grantee:  Positioning Universal Inc
Equipment Class: PCS Licensed Transmitter
Notes: M2M DATA MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1860.0  -  1900.0 0.2234 0.0054  PM 1M11G7D
24E 1860.0  -  1900.0 0.2344 0.0054  PM 1M10W7D
24E 1850.7  -  1909.3 0.228 0.0054  PM 1M11G7D
24E 1852.5  -  1907.5 0.2421 0.0054  PM 1M10W7D
27 1720.0  -  1745.0 0.2291 0.0151  PM 1M12G7D
27 1720.0  -  1745.0 0.2477 0.0151  PM 1M11W7D
27 1715.0  -  1750.0 0.2399 0.0151  PM 1M12G7D
27 1712.5  -  1752.5 0.2489 0.0151  PM 1M11W7D
27 704.0  -  711.0 0.2188 0.0072  PM 1M13G7D
27 704.0  -  711.0 0.2339 0.0072  PM 1M11W7D
27 701.5  -  713.5 0.2399 0.0072  PM 1M11W7D

Single Modular Approval. Output power listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons. A maximum antenna gain for stand-alone operation: 5 dBi for LTE Band 2 and Band 4; and 8 dBi for LTE Band 12. A maximum antenna gain when collocated with a WLAN transmitter: 4 dBi for LTE Band 2 and Band 4; and 7 dBi for LTE Band 12. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in this filing, or in accordance with FCC multi-transmitter product guidelines. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.

EAS Grant - Application p+Q/Pwp9zjADFiBvbJVrkg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Positioning Universal Inc
4660 La Jolla Village Drive Suite 1100
San Diego, CA 92122
United States
  Date of Grant: 05/30/2019

Application Dated: 05/28/2019
 
Attention: Ezra Peachey , COO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AHRH-FJ500M
Name of Grantee:  Positioning Universal Inc
Equipment Class: PCS Licensed Transmitter
Notes: M2M DATA MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1860.0  -  1900.0 0.2234 0.0054  PM 1M11G7D
24E 1860.0  -  1900.0 0.2344 0.0054  PM 1M10W7D
24E 1850.7  -  1909.3 0.228 0.0054  PM 1M11G7D
24E 1852.5  -  1907.5 0.2421 0.0054  PM 1M10W7D
27 1720.0  -  1745.0 0.2291 0.0151  PM 1M12G7D
27 1720.0  -  1745.0 0.2477 0.0151  PM 1M11W7D
27 1715.0  -  1750.0 0.2399 0.0151  PM 1M12G7D
27 1712.5  -  1752.5 0.2489 0.0151  PM 1M11W7D
27 704.0  -  711.0 0.2188 0.0072  PM 1M13G7D
27 704.0  -  711.0 0.2339 0.0072  PM 1M11W7D
27 701.5  -  713.5 0.2399 0.0072  PM 1M11W7D

Single Modular Approval. Output power listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons. A maximum antenna gain for stand-alone operation: 5 dBi for LTE Band 2 and Band 4; and 8 dBi for LTE Band 12. A maximum antenna gain when collocated with a WLAN transmitter: 4 dBi for LTE Band 2 and Band 4; and 7 dBi for LTE Band 12. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in this filing, or in accordance with FCC multi-transmitter product guidelines. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.



Mail To: