FCC ID 2AHU2NCSP3DC

NCSP3 Display Commander

by ASA Electronics Shenzhen Limited

Grantee Code: 2AHU2   Product Code: NCSP3DC
Latest application date: 2020-10-12

FCC ID Device Details

FCC ID2AHU2NCSP3DC
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AHU2
Product CodeNCSP3DC
Applicant BusinessASA Electronics Shenzhen Limited 🇨🇳
Related Domains asaelectronics.net.cn mrt-cert.com
Equipment ClassNCSP3 Display Commander
Test FirmMRT Technology (Taiwan) Co.,Ltd

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2020-10-12
2402-2480 MHzOriginal Equipment2020-10-12

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2020-10-12PDF 5.7 MB
Internal PhotosInternal Photos2020-10-12PDF 1.4 MB
External PhotosExternal Photos2020-10-12PDF 497.6 KB
ID Label/Location InfoID Label/Location Info2020-10-12PDF 74.3 KB
Test Setup PhotosTest Setup Photos2020-10-12PDF 378.1 KB
Test Report_BLETest Report2020-10-12PDF 2.8 MB
Test Report_BTTest Report2020-10-12PDF 3.9 MB
Test Report_WLANTest Report2020-10-12PDF 4.3 MB
ConfidentialityCover Letter(s)2020-10-12PDF 286.6 KB
Declaration of authorizationCover Letter(s)2020-10-12PDF 315.8 KB
MPERF Exposure Info2020-10-12PDF 201 KB
Block Diagram Metadata onlyBlock DiagramPDF 1.2 MB
Schematics Metadata onlySchematicsPDF 466.4 KB
Operational Description Metadata onlyOperational DescriptionPDF 264.5 KB

Application Information

Application IDFP+bjx4AomA8/S8G5GdVJw==
Final Action Date2020-10-12
Application PurposeOriginal Equipment
Applicant FRN0025445636
ModelNCSP3DC
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionNCSP3 Display Commander
Responsible PartyThomas Leung, Manager, thomasleung@asaelectronics.net.cn , 86-755-8279 3629
AgentChenz Chenz Chenz, MRT Technology (Taiwan) Co., Ltd, chenzker@mrt-cert.com , 886-3-3288388
Technical ContactChenz Ker, MRT Technology (Taiwan) Co., Ltd, chenzker@mrt-cert.com , 886-3-3288388
Non-Technical ContactChenz Ker, MRT Technology (Taiwan) Co., Ltd, chenzker@mrt-cert.com , 886-3-3288388
Test FirmChenz Ker, MRT Technology (Taiwan) Co.,Ltd, chenzker@mrt-cert.com , +886-3-328-8388
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
FP+bjx4AomA8/S8G5GdVJw==2020-10-12Original Equipment
/qXmSaRQh4ZrKhZF74sd/Q==2020-10-12Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.002400015C
2402-2480 MHz0.001615C
2412-2462 MHz0.2615C

Grants

TCB Grant - Application FP+bjx4AomA8/S8G5GdVJw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 10/12/2020

Application Dated: 10/12/2020
ASA Electronics Shenzhen Limited
Room 503, 5/F., Unit A, Skyworth Building,
Gaoxin Avenue.1.S.,Nanshan District,Shen Zhen
Nanshan District, 518057
China
 
Attention: Thomas Leung , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AHU2NCSP3DC
Name of Grantee:  ASA Electronics Shenzhen Limited
Equipment Class: Digital Transmission System
Notes: NCSP3 Display Commander
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0016  
15C 2412.0  -  2462.0 0.26  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application FP+bjx4AomA8/S8G5GdVJw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ASA Electronics Shenzhen Limited
Room 503, 5/F., Unit A, Skyworth Building, Gaoxin Avenue.1.S.,Nanshan District,Shen Zhen
Nanshan District, 518057
China
  Date of Grant: 10/12/2020

Application Dated: 10/12/2020
 
Attention: Thomas Leung , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AHU2NCSP3DC
Name of Grantee:  ASA Electronics Shenzhen Limited
Equipment Class: Digital Transmission System
Notes: NCSP3 Display Commander
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0016  
15C 2412.0  -  2462.0 0.26  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application /qXmSaRQh4ZrKhZF74sd/Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 10/12/2020

Application Dated: 10/12/2020
ASA Electronics Shenzhen Limited
Room 503, 5/F., Unit A, Skyworth Building,
Gaoxin Avenue.1.S.,Nanshan District,Shen Zhen
Nanshan District, 518057
China
 
Attention: Thomas Leung , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AHU2NCSP3DC
Name of Grantee:  ASA Electronics Shenzhen Limited
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: NCSP3 Display Commander
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0024  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application /qXmSaRQh4ZrKhZF74sd/Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ASA Electronics Shenzhen Limited
Room 503, 5/F., Unit A, Skyworth Building, Gaoxin Avenue.1.S.,Nanshan District,Shen Zhen
Nanshan District, 518057
China
  Date of Grant: 10/12/2020

Application Dated: 10/12/2020
 
Attention: Thomas Leung , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AHU2NCSP3DC
Name of Grantee:  ASA Electronics Shenzhen Limited
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: NCSP3 Display Commander
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0024  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.



Mail To: