FCC ID 2AI2V-ISBLE1810X52L
Bluetooth Low Energy module
by iSenseTek Technology Inc.
Grantee Code: 2AI2V Product Code: ISBLE1810X52L
Latest application date: 2019-10-31
FCC ID Device Details
| FCC ID | 2AI2V-ISBLE1810X52L |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AI2V |
| Product Code | ISBLE1810X52L |
| Applicant Business | iSenseTek Technology Inc. 🇹🇼 |
| Related Domains |  isensetek.com |
| Equipment Class | Bluetooth Low Energy module |
| Test Firm | International Standards Laboratory Corp. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-10-31 |
| 2402-2480 MHz | Original Equipment | 2019-10-08 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2019-10-31 | PDF 839.3 KB |
| Users Manual | Users Manual | 2019-10-08 | PDF 838 KB |
| Internal Photos | Internal Photos | 2019-10-08 | PDF 305.9 KB |
| External Photos | External Photos | 2019-10-08 | PDF 372.7 KB |
| ID Label/Location Info Metadata only | ID Label/Location Info | 2019-10-08 | PDF 151.5 KB |
| ID Label/Location Info_revised1008 | ID Label/Location Info | 2019-10-08 | PDF 488.2 KB |
| Test Setup Photos | Test Setup Photos | 2019-10-08 | PDF 1.9 MB |
| Test Report | Test Report | 2019-10-08 | PDF 2.8 MB |
| Class II permissive change letter | Cover Letter(s) | 2019-10-31 | PDF 180 KB |
| Declaration of Authorization | Cover Letter(s) | 2019-10-31 | PDF 266.9 KB |
| Confidentiality | Cover Letter(s) | 2019-10-08 | PDF 77.7 KB |
| Declaration of Conformity FCC subpart 15B | Cover Letter(s) | 2019-10-08 | PDF 88.4 KB |
| Declaration of authorization | Cover Letter(s) | 2019-10-08 | PDF 77.4 KB |
| FCC Modular Approval Request | Cover Letter(s) | 2019-10-08 | PDF 180.9 KB |
| RF Exposure FCC portable device | RF Exposure Info | 2019-10-31 | PDF 464.2 KB |
| MPE | RF Exposure Info | 2019-10-08 | PDF 118.9 KB |
| Block Diagram Metadata only | Block Diagram | PDF 97.3 KB | |
| Schematics Metadata only | Schematics | PDF 229.9 KB | |
| Operational Description Metadata only | Operational Description | PDF 827.6 KB |
Application Information
| Application ID | lbOWgr9wl8PRwRQKdTPE/Q== |
|---|---|
| Final Action Date | 2019-10-31 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0025716853 |
| Model | ISBLE1810X52L |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Bluetooth Low Energy module |
| Responsible Party | Brian Chiang, Director, brian@isensetek.com , +886-2-26578838 |
| Technical Contact | Vincent Su, Universal Certification Technology Co., Ltd., 886-2-6612-3337 |
| Non-Technical Contact | Vincent Su, Universal Certification Technology Co., Ltd., 886-2-6612-3337 |
| Test Firm | Angus Chu, International Standards Laboratory Corp., angus_chu@isl.com.tw  , 886-3-263-8888 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC: Complies with RF exposure of Portable devices for embed Printer antenna. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 5mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedure. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedure. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| lbOWgr9wl8PRwRQKdTPE/Q== | 2019-10-31 | Class II permissive change or modification of presently authorized equipment |
| i53gS71e43qJIA2z51OqPQ== | 2019-10-08 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0045000 | 15C |
Grants
TCB Grant - Application lbOWgr9wl8PRwRQKdTPE/Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 10/31/2019 Application Dated: 10/28/2019 |
| iSenseTek Technology Inc. |
| 4F-1, No.15, Ln. 360, Sec. 1,Neihu Rd., |
| Neihu Dist. |
| Taipei, Taiwan |
| Attention: Brian Chiang , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AI2V-ISBLE1810X52L |
| Name of Grantee: | iSenseTek Technology Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth Low Energy module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0045 |
| C2PC: Complies with RF exposure of Portable devices for embed Printer antenna. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 5mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedure.
Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedure. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application lbOWgr9wl8PRwRQKdTPE/Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
iSenseTek Technology Inc. 4F-1, No.15, Ln. 360, Sec. 1,Neihu Rd., Neihu Dist. Taipei, Taiwan |
Date of Grant: 10/31/2019 Application Dated: 10/28/2019 |
| Attention: Brian Chiang , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AI2V-ISBLE1810X52L |
| Name of Grantee: | iSenseTek Technology Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth Low Energy module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0045 |
| C2PC: Complies with RF exposure of Portable devices for embed Printer antenna. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 5mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedure.
Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedure. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 10/08/2019 Application Dated: 10/04/2019 |
| iSenseTek Technology Inc. |
| 4F-1, No.15, Ln. 360, Sec. 1,Neihu Rd., |
| Neihu Dist. |
| Taipei, Taiwan |
| Attention: Brian Chiang , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AI2V-ISBLE1810X52L |
| Name of Grantee: | iSenseTek Technology Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth Low Energy module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0045 |
| Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedure. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application i53gS71e43qJIA2z51OqPQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
iSenseTek Technology Inc. 4F-1, No.15, Ln. 360, Sec. 1,Neihu Rd., Neihu Dist. Taipei, Taiwan |
Date of Grant: 10/08/2019 Application Dated: 10/04/2019 |
| Attention: Brian Chiang , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AI2V-ISBLE1810X52L |
| Name of Grantee: | iSenseTek Technology Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth Low Energy module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0045 |
| Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedure. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |