FCC ID 2AIDWHCP6428
Hover Camera Passport
by Shenzhen Zero Zero Infinity Technology Co., Ltd.
Grantee Code: 2AIDW Product Code: HCP6428
Latest application date: 2016-10-14
FCC ID Device Details
| FCC ID | 2AIDWHCP6428 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AIDW |
| Product Code | HCP6428 |
| Applicant Business | Shenzhen Zero Zero Infinity Technology Co., Ltd. 🇨🇳 |
| Related Domains | |
| Equipment Class | Hover Camera Passport |
| Test Firm | Compliance Certification Services (Shenzhen) Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2016-10-14 |
| 5180-5240 MHz | Original Equipment | 2016-10-14 |
Exhibits
Application Information
| Application ID | tMlxAPfEOUI3Q4LL9bl4NQ== |
|---|---|
| Final Action Date | 2016-10-14 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0025568403 |
| Model | HCP6428 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Hover Camera Passport |
| Responsible Party | Yuansheng Xia, Certification Engineer, xiayuansheng@zerozero.cn |
| Agent | Shenzhen UnionTrust Quality and Technology Co., Lt |
| Technical Contact | Billy Li, Shenzhen UnionTrust Quality and Technology Co., Lt, billy.li@uttlab.com |
| Non-Technical Contact | Sandy Tang, Shenzhen UnionTrust Quality and Technology Co., Lt, sandy.tang@uttlab.com |
| Test Firm | Harry Li, Compliance Certification Services (Shenzhen) Inc., service@ccssz.com |
| TCB Email | hotline@acbcert.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 04/12/2017 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. Device is an 802.11a/b/g/n device in a 2x2 STBC MIMO configuration and enabled for either 2.4 or 5 GHz band operations as described in this filing. The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth modes and it contains 5G WLAN transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| tMlxAPfEOUI3Q4LL9bl4NQ== | 2016-10-14 | Original Equipment |
| JftySFPOYi3B5DHg2rRq/g== | 2016-10-14 | Original Equipment |
| CgSV7+gm6wVBC0Ya0SHfoA== | 2016-10-14 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application tMlxAPfEOUI3Q4LL9bl4NQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/14/2016 Application Dated: 10/11/2016 |
| Shenzhen Zero Zero Infinity Technology Co., Ltd. |
| Room A503, F5, Shanshui Building, |
| No.4093, Liuxian Avenue, Nanshan District, |
| Shenzhen, Guangdong,, China |
| Attention: Yuansheng Xia , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AIDWHCP6428 |
| Name of Grantee: | Shenzhen Zero Zero Infinity Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Hover Camera Passport |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2931 |
| Power Output listed is conducted. Device is an 802.11a/b/g/n device in a 2x2 STBC MIMO configuration and enabled for either 2.4 or 5 GHz band operations as described in this filing. The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth modes and it contains 5G WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application tMlxAPfEOUI3Q4LL9bl4NQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Zero Zero Infinity Technology Co., Ltd. Room A503, F5, Shanshui Building, No.4093, Liuxian Avenue, Nanshan District, Shenzhen, Guangdong,, China |
Date of Grant: 10/14/2016 Application Dated: 10/11/2016 |
| Attention: Yuansheng Xia , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AIDWHCP6428 |
| Name of Grantee: | Shenzhen Zero Zero Infinity Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Hover Camera Passport |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2931 |
| Power Output listed is conducted. Device is an 802.11a/b/g/n device in a 2x2 STBC MIMO configuration and enabled for either 2.4 or 5 GHz band operations as described in this filing. The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth modes and it contains 5G WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/14/2016 Application Dated: 10/11/2016 |
| Shenzhen Zero Zero Infinity Technology Co., Ltd. |
| Room A503, F5, Shanshui Building, |
| No.4093, Liuxian Avenue, Nanshan District, |
| Shenzhen, Guangdong,, China |
| Attention: Yuansheng Xia , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AIDWHCP6428 |
| Name of Grantee: | Shenzhen Zero Zero Infinity Technology Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Hover Camera Passport |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.0764 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0701 |
| Power Output listed is conducted. Device is an 802.11a/b/g/n device in a 2x2 STBC MIMO configuration and enabled for either 2.4 or 5 GHz band operations as described in this filing. The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes and it contains 2.4G WLAN transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application JftySFPOYi3B5DHg2rRq/g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Zero Zero Infinity Technology Co., Ltd. Room A503, F5, Shanshui Building, No.4093, Liuxian Avenue, Nanshan District, Shenzhen, Guangdong,, China |
Date of Grant: 10/14/2016 Application Dated: 10/11/2016 |
| Attention: Yuansheng Xia , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AIDWHCP6428 |
| Name of Grantee: | Shenzhen Zero Zero Infinity Technology Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Hover Camera Passport |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.0764 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0701 |
| Power Output listed is conducted. Device is an 802.11a/b/g/n device in a 2x2 STBC MIMO configuration and enabled for either 2.4 or 5 GHz band operations as described in this filing. The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes and it contains 2.4G WLAN transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/14/2016 Application Dated: 10/11/2016 |
| Shenzhen Zero Zero Infinity Technology Co., Ltd. |
| Room A503, F5, Shanshui Building, |
| No.4093, Liuxian Avenue, Nanshan District, |
| Shenzhen, Guangdong,, China |
| Attention: Yuansheng Xia , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AIDWHCP6428 |
| Name of Grantee: | Shenzhen Zero Zero Infinity Technology Co., Ltd. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Hover Camera Passport |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application CgSV7+gm6wVBC0Ya0SHfoA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Zero Zero Infinity Technology Co., Ltd. Room A503, F5, Shanshui Building, No.4093, Liuxian Avenue, Nanshan District, Shenzhen, Guangdong,, China |
Date of Grant: 10/14/2016 Application Dated: 10/11/2016 |
| Attention: Yuansheng Xia , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AIDWHCP6428 |
| Name of Grantee: | Shenzhen Zero Zero Infinity Technology Co., Ltd. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Hover Camera Passport |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |