FCC ID 2AIPX7260H
Dual Band Wireless AC-7260
by Contec DTx
Grantee Code: 2AIPX Product Code: 7260H
Latest application date: 2016-08-10
Device Images
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2016-08-10 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2016-08-10 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2016-08-09 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD97260H Grant Date: 04/04/2013 | 2016-07-26 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD97260H Grant Date: 04/04/2013 | 2016-07-26 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD97260H Grant Date: 04/04/2013 | 2016-07-25 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Antenna Specs | Users Manual | 2016-08-10 | PDF 734.6 KB |
| User Manual Info | Users Manual | 2016-08-10 | PDF 197 KB |
| External Photos | External Photos | 2016-08-10 | PDF 112.4 KB |
| ID Label | ID Label/Location Info | 2016-07-26 | PDF 40.1 KB |
| Test Setup Photos | Test Setup Photos | 2016-08-10 | PDF 455.2 KB |
| C2PC Test Report | Test Report | 2016-08-10 | PDF 1.1 MB |
| C2PC Test Report | Test Report | 2016-08-10 | PDF 590.8 KB |
| C2PC Test Report | Test Report | 2016-08-09 | PDF 2.5 MB |
| Grantee Contact Authorization | Attestation Statements | 2016-08-10 | PDF 128.5 KB |
| Authority Letter | Cover Letter(s) | 2016-08-10 | PDF 189.8 KB |
| C2PC Request Letter | Cover Letter(s) | 2016-08-10 | PDF 46.8 KB |
| Cover Letter | Cover Letter(s) | 2016-08-10 | PDF 92.6 KB |
| Cover Letter | Cover Letter(s) | 2016-08-10 | PDF 128 KB |
| Cover Letter | Cover Letter(s) | 2016-08-09 | PDF 94.7 KB |
| Cover Letter | Cover Letter(s) | 2016-07-26 | PDF 290.8 KB |
| Grantee Contact Authorization | Cover Letter(s) | 2016-07-26 | PDF 128.5 KB |
| Original Grantee Authorization | Cover Letter(s) | 2016-07-26 | PDF 62.1 KB |
Application Information
| Application ID | TgK5guZpzbE0bkEAX4A6jA== |
|---|---|
| Final Action Date | 2016-08-10 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0025646332 |
| Model | 7260H |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Dual Band Wireless AC-7260 |
| Responsible Party | Paul Parkinson, paul.parkinson@dtx.com  , 3218217068 |
| Agent | Dharmajit Dharmajit Dharmajit, UltraTech Engineering Labs Inc, dharmajit@ultratech-labs.com  , 9058291570 |
| Test Firm | Tri Luu, UltraTech Engineering Labs Inc., tri@ultratech-labs.com , 905-829-1570 |
| TCB Email | vic@ultratech-labs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna to user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. This grant shows the removal of the 5745-5825MHz band from the grant. This C2PC change adds new Dipole type antenna, Model GW.71 as shown in the filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| TgK5guZpzbE0bkEAX4A6jA== | 2016-08-10 | Class II permissive change or modification of presently authorized equipment |
| DRNYzEo9AvZP45eUazrzAw== | 2016-08-10 | Class II permissive change or modification of presently authorized equipment |
| /iqv7DLYLmADyx6YVyPR7g== | 2016-08-09 | Class II permissive change or modification of presently authorized equipment |
| tFHfHtZufyk3il0Gqx5Ihg== | 2016-07-26 | Change in identification of presently authorized equipment. Original FCC ID: PD97260H Grant Date: 04/04/2013 |
| X2eOGKbU3SrbFbAoJweQPQ== | 2016-07-26 | Change in identification of presently authorized equipment. Original FCC ID: PD97260H Grant Date: 04/04/2013 |
| FacGXkVcIcn9OE90oYDEnA== | 2016-07-26 | Change in identification of presently authorized equipment. Original FCC ID: PD97260H Grant Date: 04/04/2013 |
| 3qAQ6LwUqGuDKcZk9K65Bg== | 2016-07-25 | Change in identification of presently authorized equipment. Original FCC ID: PD97260H Grant Date: 04/04/2013 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.0030000 | 15C | CC |
| 2402-2480 MHz | 0.003 | 15C | CC |
| 2412-2462 MHz | 0.397 | 15C | CC, MO |
| 2422-2452 MHz | 0.476 | 15C | CC, MO |
| 5190-5230 MHz | 0.037 | 15E | 38, CC, MO |
| 5260-5320 MHz | 0.041 | 15E | 38, CC, MO, ND |
| 5500-5700 MHz | 0.053 | 15E | 38, CC, MO, ND |
| 5510-5670 MHz | 0.047 | 15E | 38, CC, MO, ND |
| 5530-5690 MHz | 0.047 | 15E | 38, CC, MO, ND |
| 5710 MHz | 0.045 | 15E | 38, CC, MO, ND |
| 5720 MHz | 0.045 | 15E | 38, CC, MO, ND |
| 5745-5825 MHz | 0.486 | 15E | 49, CC, MO, ND |
| 5755-5795 MHz | 0.523 | 15E | 49, CC, MO, ND |
| 5775 MHz | 0.505 | 15E | 49, CC, MO, ND |
Grants
TCB Grant - Application X2eOGKbU3SrbFbAoJweQPQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 07/26/2016 Application Dated: 07/26/2016 |
| Contec DTx |
| 1800 Penn St Suite 1 |
| Melbourne, FL 32901 |
| Attention: Paul Parkinson |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AIPX7260H |
| Name of Grantee: | Contec DTx |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Dual Band Wireless AC-7260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
EAS Grant - Application X2eOGKbU3SrbFbAoJweQPQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Contec DTx 1800 Penn St Suite 1 Melbourne, FL 32901 United States |
Date of Grant: 07/26/2016 Application Dated: 07/26/2016 |
| Attention: Paul Parkinson |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AIPX7260H |
| Name of Grantee: | Contec DTx |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Dual Band Wireless AC-7260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 08/10/2016 Application Dated: 08/10/2016 |
| Contec DTx |
| 1800 Penn St Suite 1 |
| Melbourne, FL 32901 |
| Attention: Paul Parkinson |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AIPX7260H |
| Name of Grantee: | Contec DTx |
| Equipment Class: | Digital Transmission System |
| Notes: | Dual Band Wireless AC-7260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.397 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.476 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna to user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. This grant shows the removal of the 5745-5825MHz band from the grant. This C2PC change adds new Dipole type antenna, Model GW.71 as shown in the filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application TgK5guZpzbE0bkEAX4A6jA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Contec DTx 1800 Penn St Suite 1 Melbourne, FL 32901 United States |
Date of Grant: 08/10/2016 Application Dated: 08/10/2016 |
| Attention: Paul Parkinson |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AIPX7260H |
| Name of Grantee: | Contec DTx |
| Equipment Class: | Digital Transmission System |
| Notes: | Dual Band Wireless AC-7260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.397 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.476 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna to user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. This grant shows the removal of the 5745-5825MHz band from the grant. This C2PC change adds new Dipole type antenna, Model GW.71 as shown in the filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 07/26/2016 Application Dated: 07/26/2016 |
| Contec DTx |
| 1800 Penn St Suite 1 |
| Melbourne, FL 32901 |
| Attention: Paul Parkinson |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AIPX7260H |
| Name of Grantee: | Contec DTx |
| Equipment Class: | Digital Transmission System |
| Notes: | Dual Band Wireless AC-7260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.397 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.476 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna to user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. This grant shows the removal of the 5745-5825 MHz band from the grant. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application tFHfHtZufyk3il0Gqx5Ihg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Contec DTx 1800 Penn St Suite 1 Melbourne, FL 32901 United States |
Date of Grant: 07/26/2016 Application Dated: 07/26/2016 |
| Attention: Paul Parkinson |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AIPX7260H |
| Name of Grantee: | Contec DTx |
| Equipment Class: | Digital Transmission System |
| Notes: | Dual Band Wireless AC-7260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.397 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.476 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna to user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. This grant shows the removal of the 5745-5825 MHz band from the grant. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 07/26/2016 Application Dated: 07/26/2016 |
| Contec DTx |
| 1800 Penn St Suite 1 |
| Melbourne, FL 32901 |
| Attention: Paul Parkinson |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AIPX7260H |
| Name of Grantee: | Contec DTx |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Dual Band Wireless AC-7260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application FacGXkVcIcn9OE90oYDEnA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Contec DTx 1800 Penn St Suite 1 Melbourne, FL 32901 United States |
Date of Grant: 07/26/2016 Application Dated: 07/26/2016 |
| Attention: Paul Parkinson |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AIPX7260H |
| Name of Grantee: | Contec DTx |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Dual Band Wireless AC-7260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 08/10/2016 Application Dated: 08/10/2016 |
| Contec DTx |
| 1800 Penn St Suite 1 |
| Melbourne, FL 32901 |
| Attention: Paul Parkinson |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AIPX7260H |
| Name of Grantee: | Contec DTx |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Dual Band Wireless AC-7260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be collocated with any other transmitters except in accordance with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Endusers and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. This C2PC change adds new Dipole type antenna, Model GW.71 as shown in the filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application DRNYzEo9AvZP45eUazrzAw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Contec DTx 1800 Penn St Suite 1 Melbourne, FL 32901 United States |
Date of Grant: 08/10/2016 Application Dated: 08/10/2016 |
| Attention: Paul Parkinson |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AIPX7260H |
| Name of Grantee: | Contec DTx |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Dual Band Wireless AC-7260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be collocated with any other transmitters except in accordance with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Endusers and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. This C2PC change adds new Dipole type antenna, Model GW.71 as shown in the filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 07/25/2016 Application Dated: 07/25/2016 |
| Contec DTx |
| 1800 Penn St Suite 1 |
| Melbourne, FL 32901 |
| Attention: Paul Parkinson |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AIPX7260H |
| Name of Grantee: | Contec DTx |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Dual Band Wireless AC-7260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.033 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.037 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.041 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.053 | ||
| 38 CC MO ND | 15E | 5510.0 - 5670.0 | 0.047 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.045 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.045 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.047 | ||
| 49 CC MO ND | 15E | 5745.0 - 5825.0 | 0.486 | ||
| 49 CC MO ND | 15E | 5755.0 - 5795.0 | 0.523 | ||
| 49 CC MO ND | 15E | 5775.0 - 5775.0 | 0.505 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 3qAQ6LwUqGuDKcZk9K65Bg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Contec DTx 1800 Penn St Suite 1 Melbourne, FL 32901 United States |
Date of Grant: 07/25/2016 Application Dated: 07/25/2016 |
| Attention: Paul Parkinson |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AIPX7260H |
| Name of Grantee: | Contec DTx |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Dual Band Wireless AC-7260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.033 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.037 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.041 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.053 | ||
| 38 CC MO ND | 15E | 5510.0 - 5670.0 | 0.047 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.045 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.045 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.047 | ||
| 49 CC MO ND | 15E | 5745.0 - 5825.0 | 0.486 | ||
| 49 CC MO ND | 15E | 5755.0 - 5795.0 | 0.523 | ||
| 49 CC MO ND | 15E | 5775.0 - 5775.0 | 0.505 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 08/09/2016 Application Dated: 08/09/2016 |
| Contec DTx |
| 1800 Penn St Suite 1 |
| Melbourne, FL 32901 |
| Attention: Paul Parkinson |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AIPX7260H |
| Name of Grantee: | Contec DTx |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Dual Band Wireless AC-7260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.033 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.037 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.041 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.053 | ||
| 38 CC MO ND | 15E | 5510.0 - 5670.0 | 0.047 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.045 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.045 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.047 | ||
| 49 CC MO ND | 15E | 5745.0 - 5825.0 | 0.486 | ||
| 49 CC MO ND | 15E | 5755.0 - 5795.0 | 0.523 | ||
| 49 CC MO ND | 15E | 5775.0 - 5775.0 | 0.505 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. This C2PC change adds new Dipole type antenna, Model GW.71 as shown in the filing. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application /iqv7DLYLmADyx6YVyPR7g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Contec DTx 1800 Penn St Suite 1 Melbourne, FL 32901 United States |
Date of Grant: 08/09/2016 Application Dated: 08/09/2016 |
| Attention: Paul Parkinson |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AIPX7260H |
| Name of Grantee: | Contec DTx |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Dual Band Wireless AC-7260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.033 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.037 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.041 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.053 | ||
| 38 CC MO ND | 15E | 5510.0 - 5670.0 | 0.047 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.045 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.045 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.047 | ||
| 49 CC MO ND | 15E | 5745.0 - 5825.0 | 0.486 | ||
| 49 CC MO ND | 15E | 5755.0 - 5795.0 | 0.523 | ||
| 49 CC MO ND | 15E | 5775.0 - 5775.0 | 0.505 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. This C2PC change adds new Dipole type antenna, Model GW.71 as shown in the filing. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |