FCC ID 2AJAC-AN520API

Araknis Networks 520-series Wi-Fi 6 AX3000 Indoor Wireless Access Point

by Snap One, LLC

Grantee Code: 2AJAC   Product Code: AN520API
Latest application date: 2022-11-23

FCC ID Device Details

FCC ID2AJAC-AN520API
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AJAC
Product CodeAN520API
Applicant BusinessSnap One, LLC 🇺🇸
Related Domains snapone.com icertifi.com.tw
Equipment ClassAraknis Networks 520-series Wi-Fi 6 AX3000 Indoor Wireless Access Point
Test FirmInternational Certification Corp.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5745-5825 MHzOriginal Equipment2022-11-23
2412-2462 MHzOriginal Equipment2022-11-23

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2022-12-13PDF 4.4 MB
Internal Photos Metadata onlyInternal Photos2022-12-13PDF 2.6 MB
Internal Photos revisedInternal Photos2022-12-13PDF 4.5 MB
External Photos Metadata onlyExternal Photos2022-12-13PDF 646.2 KB
External Photos revisedExternal Photos2022-12-13PDF 1.2 MB
ID Label/Location InfoID Label/Location Info2022-11-23PDF 161.6 KB
Test Setup Photos_DFSTest Setup Photos2022-12-13PDF 81.9 KB
Test Setup Photos_NIITest Setup Photos2022-12-13PDF 923.2 KB
Antenna reportTest Report2022-11-23PDF 3.3 MB
Test Report_CO-Co-Location revisedTest Report2022-11-23PDF 816.9 KB
Test Report_Co-Location Metadata onlyTest Report2022-11-23PDF 812.1 KB
Test Report_DFS Metadata onlyTest Report2022-11-23PDF 4.2 MB
Test Report_DFS revisedTest Report2022-11-23PDF 4.2 MB
Test Report_DTS Metadata onlyTest Report2022-11-23PDF 2.6 MB
Test Report_DTS revisedTest Report2022-11-23PDF 2.6 MB
Test Report_NII Metadata onlyTest Report2022-11-23PDF 5.5 MB
Test Report_NII revisedTest Report2022-11-23PDF 5.5 MB
Professional Insallation AttestationCover Letter(s)2022-11-23PDF 138.1 KB
Ad hocCover Letter(s)2022-11-23PDF 105.8 KB
LTCCover Letter(s)2022-11-23PDF 206.9 KB
POACover Letter(s)2022-11-23PDF 152.5 KB
Request for Deferral of Grant FCCCover Letter(s)2022-11-23PDF 119.1 KB
RF ExpRF Exposure Info2022-11-23PDF 410.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 508.1 KB
Schematics Metadata onlySchematicsPDF 2.4 MB
Operational Description Metadata onlyOperational DescriptionPDF 218.2 KB
Operational Description-SW for UNII Metadata onlyOperational DescriptionPDF 71.1 KB

Application Information

Application IDSX6mmtGClU06e9bmw9xTFg==
Final Action Date2022-11-23
Application PurposeOriginal Equipment
Applicant FRN0030764997
ModelAN520API
Frequency Range5745-5825 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionAraknis Networks 520-series Wi-Fi 6 AX3000 Indoor Wireless Access Point
Responsible PartyRoger Midgley, Principle Compliance Engineer, roger.midgley@snapone.com , 8015233187
AgentGary Gary Gary, International Certification Corp., GaryChang@icertifi.com.tw , 886-3-271-8628
Technical ContactGary Chang, International Certification Corp., GaryChang@icertifi.com.tw , 886-3-271-8628
Non-Technical ContactWendy Liao, International Certification Corp., wendyLiao@icertifi.com.tw , 886-3-271-8629
Test FirmFu-Cheng Chuang, International Certification Corp., Jeff@icertifi.com.tw , 886-3-271-8666
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date12/13/2022
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsOnly Professional Installation is allowed. Power output listed is conducted. This Access Point is authorized for use only with the transceiver card specified in this filing. The antennas used for this transmitter must be fixed-mounted on indoor/outdoor permanent structures with a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The device operation for operation in the band 5150-5250 MHz is only for indoor use. This device supports 20/40/80/160 MHz bandwidth modes. This device supports TDWR band. Operating mode at DFS band: Master

Applications

Application IDDatePurpose
SX6mmtGClU06e9bmw9xTFg==2022-11-23Original Equipment
EYAGu861z7g/EfX4/QXemg==2022-11-23Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.469000015CCC, MO
5180-5240 MHz0.45215EMO
5260-5320 MHz0.22515EMO, ND
5500-5720 MHz0.24515EMO, ND
5745-5825 MHz0.45615EMO

Grants

TCB Grant - Application SX6mmtGClU06e9bmw9xTFg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 11/23/2022

Application Dated: 06/21/2022
Snap One, LLC
1800 Continental Blvd Suite 200-300
Charlotte, North Carolina 28273 USA
Charlotte, NC 28273
 
Attention: Roger Midgley , Principle Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJAC-AN520API
Name of Grantee:  Snap One, LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Araknis Networks 520-series Wi-Fi 6 AX3000 Indoor Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15E 5180.0  -  5240.0 0.452  
MO ND 15E 5260.0  -  5320.0 0.225  
MO ND 15E 5500.0  -  5720.0 0.245  
MO 15E 5745.0  -  5825.0 0.456  

Only Professional Installation is allowed. Power output listed is conducted. This Access Point is authorized for use only with the transceiver card specified in this filing. The antennas used for this transmitter must be fixed-mounted on indoor/outdoor permanent structures with a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

The device operation for operation in the band 5150-5250 MHz is only for indoor use. This device supports 20/40/80/160 MHz bandwidth modes. This device supports TDWR band. Operating mode at DFS band: Master


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application SX6mmtGClU06e9bmw9xTFg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Snap One, LLC
1800 Continental Blvd Suite 200-300 Charlotte, North Carolina 28273 USA
Charlotte, NC 28273
United States
  Date of Grant: 11/23/2022

Application Dated: 06/21/2022
 
Attention: Roger Midgley , Principle Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJAC-AN520API
Name of Grantee:  Snap One, LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Araknis Networks 520-series Wi-Fi 6 AX3000 Indoor Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15E 5180.0  -  5240.0 0.452  
MO ND 15E 5260.0  -  5320.0 0.225  
MO ND 15E 5500.0  -  5720.0 0.245  
MO 15E 5745.0  -  5825.0 0.456  

Only Professional Installation is allowed. Power output listed is conducted. This Access Point is authorized for use only with the transceiver card specified in this filing. The antennas used for this transmitter must be fixed-mounted on indoor/outdoor permanent structures with a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

The device operation for operation in the band 5150-5250 MHz is only for indoor use. This device supports 20/40/80/160 MHz bandwidth modes. This device supports TDWR band. Operating mode at DFS band: Master


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application EYAGu861z7g/EfX4/QXemg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 11/23/2022

Application Dated: 06/21/2022
Snap One, LLC
1800 Continental Blvd Suite 200-300
Charlotte, North Carolina 28273 USA
Charlotte, NC 28273
 
Attention: Roger Midgley , Principle Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJAC-AN520API
Name of Grantee:  Snap One, LLC
Equipment Class: Digital Transmission System
Notes: Araknis Networks 520-series Wi-Fi 6 AX3000 Indoor Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.469  

Only Professional Installation is allowed. Power output listed is conducted. This Access Point is authorized for use only with the transceiver card specified in this filing. The antennas used for this transmitter must be fixed-mounted on indoor/outdoor permanent structures with a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device supports 20/40 MHz bandwith modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application EYAGu861z7g/EfX4/QXemg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Snap One, LLC
1800 Continental Blvd Suite 200-300 Charlotte, North Carolina 28273 USA
Charlotte, NC 28273
United States
  Date of Grant: 11/23/2022

Application Dated: 06/21/2022
 
Attention: Roger Midgley , Principle Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJAC-AN520API
Name of Grantee:  Snap One, LLC
Equipment Class: Digital Transmission System
Notes: Araknis Networks 520-series Wi-Fi 6 AX3000 Indoor Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.469  

Only Professional Installation is allowed. Power output listed is conducted. This Access Point is authorized for use only with the transceiver card specified in this filing. The antennas used for this transmitter must be fixed-mounted on indoor/outdoor permanent structures with a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device supports 20/40 MHz bandwith modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: