FCC ID 2AJACT4TS
System Controller
by Snap One, LLC
Grantee Code: 2AJAC Product Code: T4TS
Latest application date: 2020-12-24
FCC ID Device Details
| FCC ID | 2AJACT4TS |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AJAC |
| Product Code | T4TS |
| Applicant Business | Snap One, LLC 🇺🇸 |
| Related Domains |  snapone.com |
| Equipment Class | System Controller |
| Test Firm | VPI Laboratories, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Original Equipment | 2020-12-24 |
| 2412-2462 MHz | Original Equipment | 2020-12-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Host User Man | Users Manual | 2020-12-24 | PDF 5.7 MB |
| Host User Manual | Users Manual | 2020-12-24 | PDF 5.7 MB |
| User Manual | Users Manual | 2020-12-24 | PDF 277.7 KB |
| Host Internal Photos | Internal Photos | 2020-12-24 | PDF 242.4 KB |
| Internal Photos | Internal Photos | 2020-12-24 | PDF 244.9 KB |
| Host External Photos | External Photos | 2020-12-24 | PDF 293.1 KB |
| Host Label Sample and Location | ID Label/Location Info | 2020-12-24 | PDF 129.3 KB |
| Host Label info | ID Label/Location Info | 2020-12-24 | PDF 129.3 KB |
| Label Location | ID Label/Location Info | 2020-12-24 | PDF 218.4 KB |
| Label Sample | ID Label/Location Info | 2020-12-24 | PDF 206 KB |
| Tsup | Test Setup Photos | 2020-12-24 | PDF 245 KB |
| Test Report DFS | Test Report | 2020-12-24 | PDF 339.5 KB |
| Test Report SubC Pt 1 | Test Report | 2020-12-24 | PDF 267.9 KB |
| Test Report SubC Pt 2 | Test Report | 2020-12-24 | PDF 3.3 MB |
| Test Report UNII-1 | Test Report | 2020-12-24 | PDF 1.7 MB |
| Test Report UNII-2 | Test Report | 2020-12-24 | PDF 3 MB |
| Test Report UNII-3 | Test Report | 2020-12-24 | PDF 1.4 MB |
| Confidentiality Letter | Cover Letter(s) | 2020-12-24 | PDF 73.3 KB |
| Limited Modular Letter | Cover Letter(s) | 2020-12-24 | PDF 24.2 KB |
| POA Letter | Cover Letter(s) | 2020-12-24 | PDF 166.7 KB |
| MPE Report | RF Exposure Info | 2020-12-24 | PDF 267.9 KB |
| Block Diagram Metadata only | Block Diagram | PDF 240.5 KB | |
| Schematics Metadata only | Schematics | PDF 3 MB | |
| Operational Description Metadata only | Operational Description | PDF 17.5 KB | |
| SW Security Op Desc Metadata only | SDR Software/Security Inf | PDF 240.7 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 32.6 KB |
Application Information
| Application ID | r5U0xpwQVD1sjlURyvVAxQ== |
|---|---|
| Final Action Date | 2020-12-24 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0030764997 |
| Model | T4TS |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | System Controller |
| Responsible Party | Roger Midgley, Principle Compliance Engineer, roger.midgley@snapone.com , 8015233187 |
| Test Firm | Jason Stewart, VPI Laboratories, Inc., jasons@vpimfg.com  , 801-495-2310 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Single Modular Approval. Device is limited for use in the C4-T4 series devices manufactured by Wirepath Home Systems, and not sold to 3rd parties. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| r5U0xpwQVD1sjlURyvVAxQ== | 2020-12-24 | Original Equipment |
| 1bJ0Xu0QZycHuYfElc5a8w== | 2020-12-24 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application r5U0xpwQVD1sjlURyvVAxQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/24/2020 Application Dated: 12/24/2020 |
| Snap One, LLC |
| 1800 Continental Blvd Suite 300 |
| Charlotte, North Carolina 28273 USA |
| Charlotte, NC 28273 |
| Attention: Roger Midgley , Principle Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJACT4TS |
| Name of Grantee: | Snap One, LLC |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | System Controller |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0759 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0776 | ||
| CC | 15E | 5500.0 - 5720.0 | 0.0832 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0776 |
| Limited Single Modular Approval. Device is limited for use in the C4-T4 series devices manufactured by Wirepath Home Systems, and not sold to 3rd parties. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application r5U0xpwQVD1sjlURyvVAxQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Snap One, LLC 1800 Continental Blvd Suite 300 Charlotte, North Carolina 28273 USA Charlotte, NC 28273 United States |
Date of Grant: 12/24/2020 Application Dated: 12/24/2020 |
| Attention: Roger Midgley , Principle Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJACT4TS |
| Name of Grantee: | Snap One, LLC |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | System Controller |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0759 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0776 | ||
| CC | 15E | 5500.0 - 5720.0 | 0.0832 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0776 |
| Limited Single Modular Approval. Device is limited for use in the C4-T4 series devices manufactured by Wirepath Home Systems, and not sold to 3rd parties. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/24/2020 Application Dated: 12/24/2020 |
| Snap One, LLC |
| 1800 Continental Blvd Suite 300 |
| Charlotte, North Carolina 28273 USA |
| Charlotte, NC 28273 |
| Attention: Roger Midgley , Principle Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJACT4TS |
| Name of Grantee: | Snap One, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | System Controller |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0933 |
| Limited Single Modular Approval. Device is limited for use in the C4-T4 series devices manufactured by Wirepath Home Systems, and not sold to 3rd parties. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 1bJ0Xu0QZycHuYfElc5a8w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Snap One, LLC 1800 Continental Blvd Suite 300 Charlotte, North Carolina 28273 USA Charlotte, NC 28273 United States |
Date of Grant: 12/24/2020 Application Dated: 12/24/2020 |
| Attention: Roger Midgley , Principle Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJACT4TS |
| Name of Grantee: | Snap One, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | System Controller |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0933 |
| Limited Single Modular Approval. Device is limited for use in the C4-T4 series devices manufactured by Wirepath Home Systems, and not sold to 3rd parties. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |