FCC ID 2AJACWIFIMOD
System Controller
by Wirepath Home Systems LLC
Grantee Code: 2AJAC Product Code: WIFIMOD
Latest application date: 2020-10-16
FCC ID Device Details
| FCC ID | 2AJACWIFIMOD |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AJAC |
| Product Code | WIFIMOD |
| Applicant Business | Wirepath Home Systems LLC 🇺🇸 |
| Related Domains |  control4.com |
| Equipment Class | System Controller |
| Test Firm | VPI Laboratories, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2020-10-16 |
| 5180-5240 MHz | Original Equipment | 2020-10-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2020-10-16 | PDF 1.2 MB |
| Internal Photos | Internal Photos | 2020-10-16 | PDF 167.7 KB |
| External Photos | External Photos | 2020-10-16 | PDF 167.7 KB |
| Label Info | ID Label/Location Info | 2020-10-16 | PDF 37.6 KB |
| Tsup | Test Setup Photos | 2020-10-16 | PDF 2 MB |
| Tsup | Test Setup Photos | 2020-10-16 | PDF 240.9 KB |
| TR DFS | Test Report | 2020-10-16 | PDF 313.2 KB |
| TR UNII-1 | Test Report | 2020-10-16 | PDF 1,009.4 KB |
| TR UNII-2 | Test Report | 2020-10-16 | PDF 1.5 MB |
| TR UNII-3 | Test Report | 2020-10-16 | PDF 912.2 KB |
| Test Report | Test Report | 2020-10-16 | PDF 2 MB |
| Confidentiality Letter | Cover Letter(s) | 2020-10-16 | PDF 163.1 KB |
| Module Approval letter | Cover Letter(s) | 2020-10-16 | PDF 22.8 KB |
| POA Letter | Cover Letter(s) | 2020-10-16 | PDF 166.8 KB |
| MPE Report | RF Exposure Info | 2020-10-16 | PDF 75.4 KB |
Application Information
| Application ID | /NaANvFE3Ir4t6wsvvlJtA== |
|---|---|
| Final Action Date | 2020-10-16 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0010808202 |
| Model | WIFIMOD |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | System Controller |
| Responsible Party | Roger Midgley, Principle Compliance Engineer, rmidgley@control4.com , +18015233187 |
| Test Firm | Jason Stewart, VPI Laboratories, Inc., jasons@vpimfg.com  , 801-495-2310 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| /NaANvFE3Ir4t6wsvvlJtA== | 2020-10-16 | Original Equipment |
| /7j52PAW6mZpTkp9K6DeQQ== | 2020-10-16 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application /NaANvFE3Ir4t6wsvvlJtA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 10/16/2020 Application Dated: 10/16/2020 |
| Wirepath Home Systems, LLC, DBA SnapAV |
| 1800 Continental Blvd Suite 200 |
| Charlotte, North Carolina 28273 USA |
| Charlotte, NC 28273 |
| Attention: Roger Midgley , Principle Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJACWIFIMOD |
| Name of Grantee: | Wirepath Home Systems, LLC, DBA SnapAV |
| Equipment Class: | Digital Transmission System |
| Notes: | System Controller |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0933 |
| Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application /NaANvFE3Ir4t6wsvvlJtA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Wirepath Home Systems, LLC, DBA SnapAV 1800 Continental Blvd Suite 200 Charlotte, North Carolina 28273 USA Charlotte, NC 28273 United States |
Date of Grant: 10/16/2020 Application Dated: 10/16/2020 |
| Attention: Roger Midgley , Principle Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJACWIFIMOD |
| Name of Grantee: | Wirepath Home Systems, LLC, DBA SnapAV |
| Equipment Class: | Digital Transmission System |
| Notes: | System Controller |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0933 |
| Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 10/16/2020 Application Dated: 10/16/2020 |
| Wirepath Home Systems, LLC, DBA SnapAV |
| 1800 Continental Blvd Suite 200 |
| Charlotte, North Carolina 28273 USA |
| Charlotte, NC 28273 |
| Attention: Roger Midgley , Principle Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJACWIFIMOD |
| Name of Grantee: | Wirepath Home Systems, LLC, DBA SnapAV |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | System Controller |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0758 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0831 | ||
| CC | 15E | 5500.0 - 5720.0 | 0.0794 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0724 |
| Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application /7j52PAW6mZpTkp9K6DeQQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Wirepath Home Systems, LLC, DBA SnapAV 1800 Continental Blvd Suite 200 Charlotte, North Carolina 28273 USA Charlotte, NC 28273 United States |
Date of Grant: 10/16/2020 Application Dated: 10/16/2020 |
| Attention: Roger Midgley , Principle Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJACWIFIMOD |
| Name of Grantee: | Wirepath Home Systems, LLC, DBA SnapAV |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | System Controller |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0758 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0831 | ||
| CC | 15E | 5500.0 - 5720.0 | 0.0794 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0724 |
| Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |