UV5R Amateur Radio Test Report PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY

PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY Amateur Radio

Page 1 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 2 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 3 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 4 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 5 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 6 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 7 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 8 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 9 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 10 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 11 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 12 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 13 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 14 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 15 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 16 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 17 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 18 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 19 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 20 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 21 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 22 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 23 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 24 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 25 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 26 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 27 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Page 28 of UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY

Page 1 of 28
Report No.: HK1809111047E
FCC TEST REPORT
Test report
On Behalf of
PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP
COMPANY
For
TWO WAY RADIO
Model No.: UV-5RIII, UV-5RX3
FCC ID: 2AJGM-UV5R
Prepared for :
PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
3/F FULOK BLDG 131-133 WING LOK ST SHEUNG WAN, Hong Kong
Prepared By :
Shenzhen HUAK Testing Technology Co., Ltd.
1F, B2 Building, Junfeng Zhongcheng Zhizao Innovation Park, Fuhai Street, Bao'an
District, Shenzhen City, China
Date of Test:
Sep. 03, 2018~Sep. 28, 2018
Date of Report:
Report Number:
Sep. 28, 2018
HK1809111047E
Page 2 of 28
Report No.: HK1809111047E
TEST RESULT CERTIFICATION
Applicant’s name ................. :
PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Address ................................. :
3/F FULOK BLDG 131-133 WING LOK ST SHEUNG WAN, Hong Kong
Manufacture's Name ............ :
PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Address ................................. :
3/F FULOK BLDG 131-133 WING LOK ST SHEUNG WAN, Hong Kong
Product description
TWO WAY RADIO
Brand Name
BAOFENG ,Pofung
Mode Name
UV-5RIII
Serial Name
UV-5RX3
Difference Description
All tlhe same except the model name.
FCC Rules and Regulations Part 15B
Standards ............................. :
This publication may be reproduced in whole or in part for non-commercial purposes as long as the
Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the
material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume
liability for damages resulting from the reader's interpretation of the reproduced material due to its
placement and context.
Date of Test ........................................... :
Date (s) of performance of tests ............. :
Sep. 03, 2018~Sep. 28, 2018
Date of Issue .......................................... :
Sep. 28, 2018
Test Result ............................................. :
Pass
Testing Engineer
(Gary Qian)
Technical Manager
(Eden Hu)
Authorized Signatory :
(Jason Zhou)
Page 3 of 28
Report No.: HK1809111047E
Revision
Issue Date
Revisions
Revised By
V1.0
Sep. 28, 2018
Class II Permissive Change
Jason Zhou
Note: The original report Ref. No.(AGC02294180603FE08)(2018-06-26), was modified on 2018-09-28 to
includee the following changes and additions for:
- Updated the product designation , model name and software.
- The product increases the supported frequency band by 200 - 260 MHz.
Based on the above changes, the Conduction Emission and Radiation Emission test are updated into this
report, the test setup photos and EUT photos are updated.
Page 4 of 28
Report No.: HK1809111047E
TABLE OF CONTENTS
1. VERIFICATION OF COMPLIANCE ..........................................................................................5
2. PRODUCT INFORMATION ......................................................................................................6
3. MEASUREMENT UNCERTAINTY............................................................................................7
4. IDENTIFICATION OF THE RESPONSIBLE TESTING LOCATION .........................................8
5. SUPPORT EQUIPMENT LIST ..................................................................................................9
6. SYSTEM DESCRIPTION ..........................................................................................................9
7. SUMMARY OF TEST RESULTS ............................................................................................10
8. FCC RADIATED EMISSION TEST .........................................................................................11
8.1. TEST EQUIPMENT OF RADIATED EMISSION ....................................................................11
8.2. LIMITS OF RADIATED EMISSION TEST ...............................................................................11
8.3 BLOCK DIAGRAM OF RADIATED EMISSION TEST ...........................................................11
8.4 PROCEDURE OF RADIATED EMISSION TEST ...................................................................13
8.5 TEST RESULT OF RADIATED EMISSION TEST..................................................................14
9. CONDUCTED EMISSION TEST .............................................................................................16
9.1 PROVISIONS APPLICABLE ......................................................................................................16
9.2 MEASUREMENT PROCEDURE ...............................................................................................16
9.3 TEST SETUP BLOCK DIAGRAM..............................................................................................17
9.4 TEST RESULT..............................................................................................................................18
APPENDIX 1 PHOTOGRAPHS OF TEST SETUP .....................................................................20
APPENDIX 2 PHOTOGRAPHS OF EUT ....................................................................................21
Page 5 of 28
Report No.: HK1809111047E
1. VERIFICATION OF COMPLIANCE
Hardware Version
5R-VER22
UV-5RX3
Software Version
Measurement Procedure ANSI C63.4: 2014
Deviation:
None
Condition of Test Sample Normal
The test results of this report relate only to the tested sample identified in this report.
Page 6 of 28
Report No.: HK1809111047E
2. PRODUCT INFORMATION
The EUT is a Analog Transceiver designed for voice communication. It is designed by way of utilizing the F3E
modulation achieves the system operating.
A major technical description of EUT is described as following:
Communication Type
Voice / Tone only
Modulation
FM
RX Frequency Range
Rx:136 MHz -174 MHz, 400MHz -480MHz, 200MHz-260MHz
Emission Type
F3E
Antenna Designation
Detachable
Antenna Gain
2.15dBi
Power Supply
DC 7.4V 1800mAh, charging with DC 8.4V.
INPUT:AC 100-240V~ 50/60Hz ,0.4A
Adapter Parameter
OUTPUT:DC 10V 0.5A
INPUT: DC 10V 0.5A
Charger Parameter
OUTPUT:DC 8.4V 0.4A
I/O Port Information (
Applicable
Not Applicable)
I/O Port of EUT
I/O Port Type
Q’TY
Cable
Tested with
DC Input Port
1.14m, Unshielded
Antenna Connect Port
Page 7 of 28
Report No.: HK1809111047E
3. MEASUREMENT UNCERTAINTY
-Uncertainty of Conducted Emission, Uc=±3.2dB
- Uncertainty of Radiated Emission below 1GHz, Uc±3.9dB
- Uncertainty of Radiated Emission above 1GHz, Uc±4.8dB
Page 8 of 28
Report No.: HK1809111047E
4. IDENTIFICATION OF THE RESPONSIBLE TESTING LOCATION
Site
Shenzhen HUAK Testing Technology Co., Ltd.
Location
1F, B2 Building, Junfeng Zhongcheng Zhizao Innovation Park, Fuhai Street, Bao'an
District, Shenzhen City, China
Designation Number
CN1229
Test Firm Registration Number : 616276
List Of Test Equipment:
Conducted Emission Shielding Room Test Site (744)
Equipment
Manufacturer
Model
Serial Number
Cal. Date
Cal. Due
Receiver
R&S
ESCI 7
HKE-010
Dec. 29, 2017
Dec. 28, 2018
LISN
R&S
ENV216
HKE-002
Dec. 29, 2017
Dec. 28, 2018
HKE-081
N/A
N/A
Conducted test
software
Tonscend
TS+ Rev
2.5.0.0
TEST EQUIPMENT OF RADIATED EMISSION TEST
Equipment
Manufacturer
Model
S/N
Cal. Date
Cal. Due
Broadband antenna
Schwarzbeck
VULB 9163
HKE-012
Dec. 29, 2017
Dec. 28, 2018
Receiver
R&S
ESCI 7
HKE-010
Dec. 29, 2017
Dec. 28, 2018
Preamplifier
Schwarzbeck
BBV 9743
HKE-006
Dec. 29, 2017
Dec. 28, 2018
Position controller
Taiwan MF
MF7802
HKE-011
Dec. 29, 2017
Dec. 28, 2018
Horn antenna
Schwarzbeck
9120D
HKE-013
Dec. 29, 2017
Dec. 28, 2018
Page 9 of 28
Report No.: HK1809111047E
5. SUPPORT EQUIPMENT LIST
Device Type
Manufacturer
Model Name
Serial No.
Data Cable
Power Cable
--
--
--
6. SYSTEM DESCRIPTION
EUT test procedure:
1. Connect EUT and peripheral devices.
2. Power on the EUT, the EUT begins to work.
3. Make sure the EUT normal working.
EMC TEST MODES
No.
TEST MODES
Scanning mode
Scanning stopped/Receiving
Note: Only the result of the worst case was recorded in the report.
Page 10 of 28
Report No.: HK1809111047E
7. SUMMARY OF TEST RESULTS
FCC Rules
Description Of Test
Result
§15.107
Conduction Emission
Compliant
§15.109
Radiated Emission
Compliant
Page 11 of 28
Report No.: HK1809111047E
8. FCC RADIATED EMISSION TEST
8.1. TEST EQUIPMENT OF RADIATED EMISSION
8.2. LIMITS OF RADIATED EMISSION TEST
Frequency
Distance
Maximum Field Strength Limit
(MHz)
(m)
(dBuV/m/ Q.P.)
30~88
41.0
88~216
45.0
216~960
48.0
960~2000
53.5
**Note: The lower limit shall apply at the transition frequency. Because the EUT RX frequency range
up to 480 MHz, so the upper the frequency range up to 2 GHz.
8.3 BLOCK DIAGRAM OF RADIATED EMISSION TEST
RADIATED EMISSION TEST SETUP 30MHz-1000MHz
Page 12 of 28
Report No.: HK1809111047E
RADIATED EMISSION TEST SETUP ABOVE 1000MHz
Page 13 of 28
Report No.: HK1809111047E
8.4 PROCEDURE OF RADIATED EMISSION TEST
1) The equipment was set up as per the test configuration to simulate typical actual usage per the user’s
manual. When the EUT is a tabletop system, a wooden turntable with a height of 0.8 meters is used which
is placed on the ground plane as per ANSI C63.4 (see Test Facility for the dimensions of the ground plane
used). When the EUT is floor-standing equipment, it is placed on the ground plane which has a 3-12 mm
non-conductive covering to insulate the EUT from the ground plane.
2) Support equipment, if needed, was placed as per ANSI C63.4.
3) All I/O cables were positioned to simulate typical actual usage as per ANSI C63.4.
4) The EUT received power by AC 120V/60Hz adapter.
5) The antenna was placed at 3 meter away from the EUT as stated in FCC Part 15. The antenna connected
to the Analyzer via a cable and at times a pre-amplifier would be used.
6) The Analyzer / Receiver quickly scanned from 30MHz to 1000MHz. The EUT test program was started.
Emissions were scanned and measured rotating the EUT to 360 degrees and positioning the antenna 1 to 4
meters above the ground plane, in both the vertical and the horizontal polarization, to maximize the
emission reading level.
7) The test mode(s) were scanned during the test:
8) Recorded at least the six highest emissions. Emission frequency, amplitude, antenna position, polarization
and turntable position were recorded into a computer in which correction factors were used to calculate the
emission level and compare reading to the applicable limit and Q.P./Peak reading is presented. For
emissions below 1GHz, use 120KHz RBW and VBW>=3RBW for QP reading.
9) For emissions above 1GHz, use 1MHz RBW and 3MHz VBW for peak reading. Then 1MHz RBW and
10Hz VBW for average reading in spectrum analyzer.
10) When the radiated emissions limits are expressed in terms of the average value of the emissions, and
pulsed operation is employed, the measurement field strength shall be determined by averaging over one
complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds.
As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the
pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average
absolute voltage during a 0.1 second interval during which the field strength is at its maximum values.
11)If the emissions level of the EUT in peak mode was 3 dB lower than the average limit specified, then
testing will be stopped and peak values of EUT will be reported, otherwise, the emissions which do not
have 3 dB margin will be repeated one by one using the quasi-peak method for below 1GHz.
12) For testing above 1GHz, the emissions level of the EUT in peak mode was lower than average limit (that
means the emissions level in peak mode also complies with the limit in average mode), then testing will be
stopped and peak values of EUT will be reported, otherwise, the emissions will be measured in average
mode again and reported.
13) In case the emission is lower than 30MHz, loop antenna has to be used for measurement and the
recorded data should be QP measured by receiver. High - Low scan is not required in this case.
14) The test data of the worst case condition (mode 1) was reported on the following Data page
Page 14 of 28
Report No.: HK1809111047E
8.5 TEST RESULT OF RADIATED EMISSION TEST
Radiated Emission Test –Horizontal -3m Below 1G
RESULT: PASS
Page 15 of 28
Report No.: HK1809111047E
Radiated Emission Test –Vertical -3m Below 1G
RESULT: PASS
Note: 1. Factor=Antenna Factor + Cable loss - Amplifier gain, Margin=Measurement-Limit.
2. The “Factor” value can be calculated automatically by software of measurement system.
3. Emissions range from 1GHz to 2GHz have 20dB margin. No recording in the test report.
4. Only the data of the worst case would be record in this test report.
Page 16 of 28
Report No.: HK1809111047E
9. CONDUCTED EMISSION TEST
9.1 PROVISIONS APPLICABLE
For an intentional radiator that is designed to be connected to the public utility (AC) power line, the, the
radio frequency voltage that is conducted back onto the AC power line on any frequencies within the band
150 KHz to 30 MHz shall not exceed the limits in the following table, as measured using a 50uH/50 ohms
line impedance stabilization network (LISN). Compliance with the provisions of this paragraph shall be
based on the measurement of the radio frequency voltage between each power line and ground at the
power terminal. The lower limit applies at the boundary between the frequencies ranges.
Conducted Limit(dBuV)
Frequency of Emission (MHz)
Quasi-Peak
Average
0.15 – 0.5
66 to 56 *
56 to 46 *
0.5 – 5
56
46
5 – 30
60
50
* Decreases with the logarithm of the frequency.
9.2 MEASUREMENT PROCEDURE
(1) The equipment was set up as per the test configuration to simulate typical actual usage per the user’s
manual. When the EUT is a tabletop system, a wooden table with a height of 0.8 meters is used and
is placed on the ground plane as per ANSI C63.4 (see Test Facility for the dimensions of the ground
plane used). When the EUT is a floor-standing equipment, it is placed on the ground plane which has
a 3-12 mm non-conductive covering to insulate the EUT from the ground plane.
(2) Support equipment, if needed, was placed as per ANSI C63.4.
(3) All I/O cables were positioned to simulate typical actual usage as per ANSI C63.4.
(4) All support equipments received AC120V/60Hz power from a LISN, if any.
(5) The EUT received DC charging voltage by adapter which received 120V/60Hz power by a LISN.
(6) The EUT test program was started. Emissions were measured on each current carrying line of the EUT
using a spectrum Analyzer / Receiver connected to the LISN powering the EUT. The LISN has two
monitoring points: Line 1 (Hot Side) and Line 2 (Neutral Side). Two scans were taken: one with
Line 1 connected to Analyzer / Receiver and Line 2 connected to a 50 ohm load; the second scan had
Line 1 connected to a 50 ohm load and Line 2 connected to the Analyzer / Receiver.
(7) Analyzer / Receiver scanned from 150 KHz to 30MHz for emissions in each of the test modes.
During the above scans, the emissions were maximized by cable manipulation.
Page 17 of 28
9.3 TEST SETUP BLOCK DIAGRAM
Report No.: HK1809111047E
Page 18 of 28
Report No.: HK1809111047E
9.4 TEST RESULT
CONDUCTED EMISSION TEST – LINE L
RESULT: PASS
Page 19 of 28
Report No.: HK1809111047E
CONDUCTED EMISSION TEST – LINE N
RESULT: PASS
Page 20 of 28
Report No.: HK1809111047E
APPENDIX 1 PHOTOGRAPHS OF TEST SETUP
CONDUCTED EMISSION TEST SETUP
RADIATED EMISSION TEST SETUP
Page 21 of 28
Report No.: HK1809111047E
APPENDIX 2 PHOTOGRAPHS OF EUT
TOTAL VIEW OF EUT
TOP VIEW OF EUT
Page 22 of 28
Report No.: HK1809111047E
BOTTOM VIEW OF EUT
FRONT VIEW OF EUT
Page 23 of 28
Report No.: HK1809111047E
BACK VIEW OF EUT
LEFT VIEW OF EUT
Page 24 of 28
Report No.: HK1809111047E
RIGHT VIEW OF EUT
OPEN VIEW-1 OF EUT
Page 25 of 28
Report No.: HK1809111047E
OPEN VIEW-2 OF EUT
OPEN VIEW-3 OF EUT
Page 26 of 28
Report No.: HK1809111047E
INTERNAL VIEW-1 OF EUT
INTERNAL VIEW-2 OF EUT
Page 27 of 28
Report No.: HK1809111047E
INTERNAL VIEW-4 OF EUT
INTERNAL VIEW-5 OF EUT
Page 28 of 28
Report No.: HK1809111047E
INTERNAL VIEW-6 OF EUT
INTERNAL VIEW-7 OF EUT
----END OF REPORT----
Download: UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Mirror Download [FCC.gov]UV5R Amateur Radio Test Report  PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
Document ID4057985
Application IDZyd11TBHk949eULqKGjNmA==
Document Descriptiontest report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize224.32kB (2803951 bits)
Date Submitted2018-11-02 00:00:00
Date Available2018-11-02 00:00:00
Creation Date2018-09-30 14:00:56
Producing SoftwareMicrosoft® Office Word 2007
Document Lastmod2018-10-08 17:41:47
Document Titletest report
Document CreatorMicrosoft® Office Word 2007
Document Author: lenovo

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : lenovo
Create Date                     : 2018:09:30 14:00:56+08:00
Modify Date                     : 2018:10:08 17:41:47+08:00
Language                        : zh-CN
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : lenovo
Title                           : 
Creator Tool                    : Microsoft® Office Word 2007
Metadata Date                   : 2018:10:08 17:41:47+08:00
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:2377a213-b7da-4f53-a82f-fa00a9648218
Instance ID                     : uuid:bee3ea5b-52bb-487a-bb9e-47367b2fe9b2
Page Count                      : 28