1. FCC ID
  2. 2AJMN
  3. 2AJMN-S665L

FCC ID 2AJMN-S665L

Mobile Phone

by ITEL MOBILE LIMITED

Grantee Code: 2AJMN   Product Code: S665L
Latest application date: 2023-05-25

FCC ID Device Details

FCC ID2AJMN-S665L
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AJMN
Product CodeS665L
Applicant BusinessITEL MOBILE LIMITED
Related Domains itel-mobile.com
Equipment ClassMobile Phone
Test FirmShenzhen Accurate Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2023-05-25
2402-2480 MHzOriginal Equipment2023-05-25
699.7-715.3 MHzOriginal Equipment2023-05-25
2402-2480 MHzOriginal Equipment2023-05-25

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2023-11-21PDF 944 KB
Internal PhotosInternal Photos2023-11-21PDF 1 MB
External PhotosExternal Photos2023-11-21PDF 4.8 MB
Label & Label LocationID Label/Location Info2023-05-25PDF 416.7 KB
SAR EUT Test Position PhotosTest Setup Photos2023-11-21PDF 1.8 MB
Test Setup PhotosTest Setup Photos2023-11-21PDF 230.3 KB
Test Setup PhotosTest Setup Photos2023-11-21PDF 357.1 KB
Antenna SpecificationTest Report2023-05-25PDF 4.9 MB
Test ReportTest Report2023-05-25PDF 3.2 MB
Test ReportTest Report2023-05-25PDF 2.4 MB
Test ReportTest Report2023-05-25PDF 2.7 MB
Test ReportTest Report2023-05-25PDF 2.7 MB
Test Report Appendix A Part 1Test Report2023-05-25PDF 5.5 MB
Test Report Appendix A Part 2Test Report2023-05-25PDF 5 MB
Test Report Appendix B Part 1Test Report2023-05-25PDF 5.4 MB
Test Report Appendix B Part 2Test Report2023-05-25PDF 4.2 MB
Test Report Appendix CTest Report2023-05-25PDF 5 MB
2.911 (d)(5)(i) Attestation StatementAttestation Statements2023-05-25PDF 128.9 KB
2.911 (d)(5)(ii) Attestation StatementAttestation Statements2023-05-25PDF 128.1 KB
Attestation LetterAttestation Statements2023-05-25PDF 112.4 KB
US Agent Attestation LetterAttestation Statements2023-05-25PDF 1.1 MB
FCC Agent Authorization LetterCover Letter(s)2023-05-25PDF 170.1 KB
FCC Long and Short term Confidentiality RequestCover Letter(s)2023-05-25PDF 176.3 KB
RF ExposureRF Exposure Info2023-05-25PDF 133 KB
SAR Probe & Dipole Calibration Certificates Part 1RF Exposure Info2023-05-25PDF 5.2 MB
SAR Probe & Dipole Calibration Certificates Part 2RF Exposure Info2023-05-25PDF 3.6 MB
SAR ReportRF Exposure Info2023-05-25PDF 1.7 MB
SAR Scan Plots Part 1RF Exposure Info2023-05-25PDF 4.7 MB
SAR Scan Plots Part 2RF Exposure Info2023-05-25PDF 2.2 MB
Block Diagram Metadata onlyBlock DiagramPDF 5.1 MB
Schematics Metadata onlySchematicsPDF 3.8 MB
Circuit Description Metadata onlyOperational DescriptionPDF 176.2 KB
Software Security Description Metadata onlySDR Software/Security InfPDF 199.6 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 234.2 KB
Tune up Procedure Metadata onlyParts List/Tune Up InfoPDF 351.6 KB

Application Information

Application IDqcPjH5NFS/6ZcLvlpd9iGg==
Final Action Date2023-05-25
Application PurposeOriginal Equipment
Applicant FRN0025849035
ModelS665L
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionMobile Phone
Responsible PartyYiting Luo, certificatetac.qm@itel-mobile.com , +86-755-61803856
Test FirmLisa Zhang, Shenzhen Accurate Technology Co., Ltd., qa@atc-lab.com , +86-755-26503290
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date11/21/2023
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory and simultaneous transmission exposure conditions are 0.20 W/kg, 0.21 W/kg and 1.43 W/kg, respectively. This device supports 20 MHz, 40 MHz and 80MHz bandwidth modes.

Applications

Application IDDatePurpose
qcPjH5NFS/6ZcLvlpd9iGg==2023-05-25Original Equipment
Wq2r4A7AblS1DvPGpF7w5g==2023-05-25Original Equipment
MY5wehRE2K2FQYhgQaAEHw==2023-05-25Original Equipment
FYd/9aBAOSaVZkK6Pyk4OQ==2023-05-25Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
699.7-715.3 MHz0.062.5ppm1M10G7D27
699.7-715.3 MHz0.0552.5ppm1M09D7W27
704-711 MHz0.0592.5ppm8M94G7D27
704-711 MHz0.0542.5ppm8M98D7W27
709-711 MHz0.0592.5ppm8M94G7D27
709-711 MHz0.0552.5ppm8M94D7W27
782 MHz0.0462.5ppm8M94G7D27
782 MHz0.0422.5ppm8M98D7W27
824.7-848.3 MHz0.0652.5ppm1M10D7W22H
829-844 MHz0.0692.5ppm8M98G7D22H
829-844 MHz0.0592.5ppm8M98D7W22H
1712.4-1752.6 MHz0.1042.5ppm4M15F9W27
1715-1775 MHz0.0722.5ppm8M94G7D27
1720-1745 MHz0.0642.5ppm18M0G7D27
1720-1745 MHz0.0622.5ppm18M0D7W27
1720-1770 MHz0.0712.5ppm18M0G7D27
1720-1770 MHz0.0632.5ppm18M0D7W27
1850.2-1909.8 MHz1.0452.5ppm243KGXW24E
1850.2-1909.8 MHz0.3842.5ppm241KG7W24E
1852.4-1907.6 MHz0.1192.5ppm4M15F9W24E
1855-1905 MHz0.0842.5ppm8M98G7D24E
1860-1900 MHz0.0732.5ppm18M0D7W24E
1860-1900 MHz0.082.5ppm18M0G7D24E
2402-2480 MHz0.000215CCC
2402-2480 MHz0.005000015CCC
2412-2472 MHz0.01215CCC
2510-2560 MHz0.0542.5ppm18M0G7D27
2510-2560 MHz0.0462.5ppm18M0D7W27
2545-2645 MHz0.1462.5ppm18M0G7D27
2545-2645 MHz0.1322.5ppm18M0D7W27
2575-2615 MHz0.1452.5ppm8M98G7D27
2580-2610 MHz0.1412.5ppm18M0G7D27
2580-2610 MHz0.1432.5ppm18M0D7W27
5180-5240 MHz0.0115ECC
5745-5825 MHz0.01115ECC

Grants

TCB Grant - Application Wq2r4A7AblS1DvPGpF7w5g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 05/25/2023

Application Dated: 05/25/2023
ITEL MOBILE LIMITED
FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL
CENTRE 19-25 SHAN MEI STREET FOTAN NT
NT,
Hong Kong
 
Attention: Yiting Luo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJMN-S665L
Name of Grantee:  ITEL MOBILE LIMITED
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Mobile Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.005  

Output power listed is conducted.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Wq2r4A7AblS1DvPGpF7w5g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

ITEL MOBILE LIMITED
FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL CENTRE 19-25 SHAN MEI STREET FOTAN NT
NT,
Hong Kong 		  Date of Grant: 05/25/2023

Application Dated: 05/25/2023
 
Attention: Yiting Luo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJMN-S665L
Name of Grantee:  ITEL MOBILE LIMITED
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Mobile Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.005  

Output power listed is conducted.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application qcPjH5NFS/6ZcLvlpd9iGg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 05/25/2023

Application Dated: 05/25/2023
ITEL MOBILE LIMITED
FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL
CENTRE 19-25 SHAN MEI STREET FOTAN NT
NT,
Hong Kong
 
Attention: Yiting Luo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJMN-S665L
Name of Grantee:  ITEL MOBILE LIMITED
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Mobile Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.01  
CC 15E 5745.0  -  5825.0 0.011  

Output power listed is conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory and simultaneous transmission exposure conditions are 0.20 W/kg, 0.21 W/kg and 1.43 W/kg, respectively. This device supports 20 MHz, 40 MHz and 80MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application qcPjH5NFS/6ZcLvlpd9iGg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

ITEL MOBILE LIMITED
FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL CENTRE 19-25 SHAN MEI STREET FOTAN NT
NT,
Hong Kong 		  Date of Grant: 05/25/2023

Application Dated: 05/25/2023
 
Attention: Yiting Luo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJMN-S665L
Name of Grantee:  ITEL MOBILE LIMITED
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Mobile Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.01  
CC 15E 5745.0  -  5825.0 0.011  

Output power listed is conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory and simultaneous transmission exposure conditions are 0.20 W/kg, 0.21 W/kg and 1.43 W/kg, respectively. This device supports 20 MHz, 40 MHz and 80MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application MY5wehRE2K2FQYhgQaAEHw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 05/25/2023

Application Dated: 05/25/2023
ITEL MOBILE LIMITED
FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL
CENTRE 19-25 SHAN MEI STREET FOTAN NT
NT,
Hong Kong
 
Attention: Yiting Luo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJMN-S665L
Name of Grantee:  ITEL MOBILE LIMITED
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Mobile Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 0.7 2.5  PM 243KGXW
22H 824.2  -  848.8 0.129 2.5  PM 248KG7W
22H 826.4  -  846.6 0.07 2.5  PM 4M15F9W
24E 1850.2  -  1909.8 1.045 2.5  PM 243KGXW
24E 1850.2  -  1909.8 0.384 2.5  PM 241KG7W
24E 1852.4  -  1907.6 0.119 2.5  PM 4M15F9W
27 1712.4  -  1752.6 0.104 2.5  PM 4M15F9W
24E 1855.0  -  1905.0 0.084 2.5  PM 8M98G7D
24E 1860.0  -  1900.0 0.08 2.5  PM 18M0G7D
24E 1860.0  -  1900.0 0.073 2.5  PM 18M0D7W
27 1720.0  -  1745.0 0.064 2.5  PM 18M0G7D
27 1720.0  -  1745.0 0.062 2.5  PM 18M0D7W
22H 824.7  -  848.3 0.065 2.5  PM 1M10D7W
22H 829.0  -  844.0 0.069 2.5  PM 8M98G7D
22H 829.0  -  844.0 0.059 2.5  PM 8M98D7W
27 2510.0  -  2560.0 0.054 2.5  PM 18M0G7D
27 2510.0  -  2560.0 0.046 2.5  PM 18M0D7W
27 699.7  -  715.3 0.06 2.5  PM 1M10G7D
27 699.7  -  715.3 0.055 2.5  PM 1M09D7W
27 704.0  -  711.0 0.059 2.5  PM 8M94G7D
27 704.0  -  711.0 0.054 2.5  PM 8M98D7W
27 782.0  -  782.0 0.046 2.5  PM 8M94G7D
27 782.0  -  782.0 0.042 2.5  PM 8M98D7W
27 709.0  -  711.0 0.059 2.5  PM 8M94G7D
27 709.0  -  711.0 0.055 2.5  PM 8M94D7W
27 2575.0  -  2615.0 0.145 2.5  PM 8M98G7D
27 2580.0  -  2610.0 0.141 2.5  PM 18M0G7D
27 2580.0  -  2610.0 0.143 2.5  PM 18M0D7W
27 2545.0  -  2645.0 0.146 2.5  PM 18M0G7D
27 2545.0  -  2645.0 0.132 2.5  PM 18M0D7W
27 1715.0  -  1775.0 0.072 2.5  PM 8M94G7D
27 1720.0  -  1770.0 0.071 2.5  PM 18M0G7D
27 1720.0  -  1770.0 0.063 2.5  PM 18M0D7W

Output power listed is ERP for operation below 1 GHz and EIRP for operation above 1 GHz. LTE supports 1.4/3/5/10/15/20 MHz BW modes in Band 2/4/66, 1.4/3/5/10 MHz BW modes in Band 5/12, 5/10 MHz BW modes in band 13/17, and 5/10/15/20 MHz BW modes in Band 7/38/41. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific, and simultaneous transmission exposure conditions are 1.23 W/kg, 0.55W/kg, 0.76 W/kg, and 1.58 W/kg, respectively.

This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations.


EAS Grant - Application MY5wehRE2K2FQYhgQaAEHw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

ITEL MOBILE LIMITED
FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL CENTRE 19-25 SHAN MEI STREET FOTAN NT
NT,
Hong Kong 		  Date of Grant: 05/25/2023

Application Dated: 05/25/2023
 
Attention: Yiting Luo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJMN-S665L
Name of Grantee:  ITEL MOBILE LIMITED
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Mobile Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 0.7 2.5  PM 243KGXW
22H 824.2  -  848.8 0.129 2.5  PM 248KG7W
22H 826.4  -  846.6 0.07 2.5  PM 4M15F9W
24E 1850.2  -  1909.8 1.045 2.5  PM 243KGXW
24E 1850.2  -  1909.8 0.384 2.5  PM 241KG7W
24E 1852.4  -  1907.6 0.119 2.5  PM 4M15F9W
27 1712.4  -  1752.6 0.104 2.5  PM 4M15F9W
24E 1855.0  -  1905.0 0.084 2.5  PM 8M98G7D
24E 1860.0  -  1900.0 0.08 2.5  PM 18M0G7D
24E 1860.0  -  1900.0 0.073 2.5  PM 18M0D7W
27 1720.0  -  1745.0 0.064 2.5  PM 18M0G7D
27 1720.0  -  1745.0 0.062 2.5  PM 18M0D7W
22H 824.7  -  848.3 0.065 2.5  PM 1M10D7W
22H 829.0  -  844.0 0.069 2.5  PM 8M98G7D
22H 829.0  -  844.0 0.059 2.5  PM 8M98D7W
27 2510.0  -  2560.0 0.054 2.5  PM 18M0G7D
27 2510.0  -  2560.0 0.046 2.5  PM 18M0D7W
27 699.7  -  715.3 0.06 2.5  PM 1M10G7D
27 699.7  -  715.3 0.055 2.5  PM 1M09D7W
27 704.0  -  711.0 0.059 2.5  PM 8M94G7D
27 704.0  -  711.0 0.054 2.5  PM 8M98D7W
27 782.0  -  782.0 0.046 2.5  PM 8M94G7D
27 782.0  -  782.0 0.042 2.5  PM 8M98D7W
27 709.0  -  711.0 0.059 2.5  PM 8M94G7D
27 709.0  -  711.0 0.055 2.5  PM 8M94D7W
27 2575.0  -  2615.0 0.145 2.5  PM 8M98G7D
27 2580.0  -  2610.0 0.141 2.5  PM 18M0G7D
27 2580.0  -  2610.0 0.143 2.5  PM 18M0D7W
27 2545.0  -  2645.0 0.146 2.5  PM 18M0G7D
27 2545.0  -  2645.0 0.132 2.5  PM 18M0D7W
27 1715.0  -  1775.0 0.072 2.5  PM 8M94G7D
27 1720.0  -  1770.0 0.071 2.5  PM 18M0G7D
27 1720.0  -  1770.0 0.063 2.5  PM 18M0D7W

Output power listed is ERP for operation below 1 GHz and EIRP for operation above 1 GHz. LTE supports 1.4/3/5/10/15/20 MHz BW modes in Band 2/4/66, 1.4/3/5/10 MHz BW modes in Band 5/12, 5/10 MHz BW modes in band 13/17, and 5/10/15/20 MHz BW modes in Band 7/38/41. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific, and simultaneous transmission exposure conditions are 1.23 W/kg, 0.55W/kg, 0.76 W/kg, and 1.58 W/kg, respectively.

This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations.



TCB Grant - Application FYd/9aBAOSaVZkK6Pyk4OQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 05/25/2023

Application Dated: 05/25/2023
ITEL MOBILE LIMITED
FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL
CENTRE 19-25 SHAN MEI STREET FOTAN NT
NT,
Hong Kong
 
Attention: Yiting Luo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJMN-S665L
Name of Grantee:  ITEL MOBILE LIMITED
Equipment Class: Digital Transmission System
Notes: Mobile Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0002  
CC 15C 2412.0  -  2472.0 0.012  

Output power listed is average conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory and simultaneous transmission exposure conditions are 0.35 W/kg, 0.17 W/kg and 1.58 W/kg, respectively. The device supports 20M and 40M modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application FYd/9aBAOSaVZkK6Pyk4OQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

ITEL MOBILE LIMITED
FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL CENTRE 19-25 SHAN MEI STREET FOTAN NT
NT,
Hong Kong 		  Date of Grant: 05/25/2023

Application Dated: 05/25/2023
 
Attention: Yiting Luo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJMN-S665L
Name of Grantee:  ITEL MOBILE LIMITED
Equipment Class: Digital Transmission System
Notes: Mobile Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0002  
CC 15C 2412.0  -  2472.0 0.012  

Output power listed is average conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory and simultaneous transmission exposure conditions are 0.35 W/kg, 0.17 W/kg and 1.58 W/kg, respectively. The device supports 20M and 40M modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: