FCC ID 2AJOTTA-1404

Multi-band GSM/WCDMA/LTE phone with Bluetooth&WLAN;

by HMD global Oy

Grantee Code: 2AJOT   Product Code: TA1404
Latest application date: 2022-11-07

FCC ID Device Details

FCC ID2AJOTTA-1404
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AJOT
Product CodeTA1404
Applicant BusinessHMD global Oy 🇫🇮
Related Domains hmdglobal.com
Equipment ClassMulti-band GSM/WCDMA/LTE phone with Bluetooth&WLAN;
Test FirmBV 7Layers Communications Technology (Shenzhen) Co

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
699.7-715.3 MHzClass II permissive change or modification of presently authorized equipment2022-11-07
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2022-11-07
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-11-07
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-11-07
2510-2560 MHzOriginal Equipment2021-12-24
5180-5240 MHzOriginal Equipment2021-12-24
2402-2480 MHzOriginal Equipment2021-12-23
2412-2462 MHzOriginal Equipment2021-12-23

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2022-06-18PDF 615.2 KB
Internal photosInternal Photos2023-04-25PDF 2.3 MB
Internal photosInternal Photos2022-06-18PDF 2.9 MB
External photosExternal Photos2023-04-25PDF 938.5 KB
External photosExternal Photos2022-06-18PDF 922.9 KB
Label and label locationID Label/Location Info2021-12-24PDF 33.6 KB
Test setup photos for 15BTest Setup Photos2023-04-25PDF 524 KB
Test setup photos for DFSTest Setup Photos2023-04-25PDF 111.6 KB
Test setup photos for RFTest Setup Photos2023-04-25PDF 696.5 KB
Test setup photos for SARTest Setup Photos2023-04-25PDF 649.4 KB
16 Test setup photos for SARTest Setup Photos2022-06-18PDF 714 KB
Test setup photos for 15BTest Setup Photos2022-06-18PDF 537.7 KB
Test setup photos for DFSTest Setup Photos2022-06-18PDF 526.3 KB
Test setup photos for RFTest Setup Photos2022-06-18PDF 612.3 KB
Test setup photos for SARTest Setup Photos2022-06-18PDF 714 KB
Test report for 15BTest Report2022-11-07PDF 1.1 MB
Test report for 2.4GWIF&BLE part1Test Report2022-11-07PDF 1.4 MB
Test report for 2.4GWIF&BLE part2Test Report2022-11-07PDF 2.2 MB
Test report for 2.4GWIF&BLE part3Test Report2022-11-07PDF 3.8 MB
Test report for 2.4GWIF&BLE part4Test Report2022-11-07PDF 3.7 MB
Test report for 2.4GWIF&BLE part5Test Report2022-11-07PDF 424.4 KB
Test report for 5GWIFI DFSTest Report2022-11-07PDF 928.5 KB
Test report for 5GWIFI part1Test Report2022-11-07PDF 1.7 MB
Test report for 5GWIFI part2Test Report2022-11-07PDF 3.3 MB
Test report for 5GWIFI part3Test Report2022-11-07PDF 5 MB
Test report for 5GWIFI part4Test Report2022-11-07PDF 4.9 MB
Test report for 5GWIFI part5Test Report2022-11-07PDF 3.3 MB
Test report for BTTest Report2022-11-07PDF 5.5 MB
Test report for Part 22 part1Test Report2022-11-07PDF 1.4 MB
Test report for Part 22 part2Test Report2022-11-07PDF 2.6 MB
Test report for Part 22 part3Test Report2022-11-07PDF 2.4 MB
Test report for Part 24 part1Test Report2022-11-07PDF 2.1 MB
Test report for Part 24 part2Test Report2022-11-07PDF 3.4 MB
Test report for Part 24 part3Test Report2022-11-07PDF 3 MB
Test report for Part 24 part4Test Report2022-11-07PDF 153 KB
Test report for Part 27 part1Test Report2022-11-07PDF 2.3 MB
Test report for Part 27 part2Test Report2022-11-07PDF 3.8 MB
Test report for Part 27 part3Test Report2022-11-07PDF 3.8 MB
Test report for Part 27 part4Test Report2022-11-07PDF 4.2 MB
Test report for Part 27 part5Test Report2022-11-07PDF 4.1 MB
Test report for Part 27 part6Test Report2022-11-07PDF 4.5 MB
Test report for Part 27 part7Test Report2022-11-07PDF 3.8 MB
Test report for Part 27 part8Test Report2022-11-07PDF 495.5 KB
Test report for 5GWIFI DFSTest Report2021-12-24PDF 796 KB
Test report for 5GWIFI part1Test Report2021-12-24PDF 1.5 MB
Test report for 5GWIFI part2Test Report2021-12-24PDF 2 MB
Test report for 5GWIFI part3Test Report2021-12-24PDF 4.2 MB
Test report for 5GWIFI part4Test Report2021-12-24PDF 4.1 MB
Test report for 5GWIFI part5Test Report2021-12-24PDF 4 MB
Test report for 5GWIFI part6Test Report2021-12-24PDF 2.3 MB
Test report for Part 22 part1Test Report2021-12-24PDF 2 MB
Test report for Part 22 part2Test Report2021-12-24PDF 2.5 MB
Test report for Part 22 part3Test Report2021-12-24PDF 3.1 MB
Test report for Part 22 part4Test Report2021-12-24PDF 3.5 MB
Test report for Part 22 part5Test Report2021-12-24PDF 2.9 MB
Test report for Part 24 part1Test Report2021-12-24PDF 2.2 MB
Test report for Part 24 part2Test Report2021-12-24PDF 2.5 MB
Test report for Part 24 part3Test Report2021-12-24PDF 3.8 MB
Test report for Part 27 part1Test Report2021-12-24PDF 1.4 MB
Test report for Part 27 part10Test Report2021-12-24PDF 3.1 MB
Test report for Part 27 part2Test Report2021-12-24PDF 2.7 MB
Test report for Part 27 part3Test Report2021-12-24PDF 2.6 MB
Test report for Part 27 part4Test Report2021-12-24PDF 3.5 MB
Test report for Part 27 part5Test Report2021-12-24PDF 2.9 MB
Test report for Part 27 part6Test Report2021-12-24PDF 2.9 MB
Test report for Part 27 part7Test Report2021-12-24PDF 3.1 MB
Test report for Part 27 part8Test Report2021-12-24PDF 2.3 MB
Test report for Part 27 part9Test Report2021-12-24PDF 3.1 MB
Test report for 15BTest Report2021-12-23PDF 1.4 MB
Test report for 2.4GWIF&BLE part1Test Report2021-12-23PDF 3.3 MB
Test report for 2.4GWIF&BLE part2Test Report2021-12-23PDF 4 MB
Test report for 2.4GWIF&BLE part3Test Report2021-12-23PDF 4 MB
Test report for BT part1Test Report2021-12-23PDF 3.5 MB
Test report for BT part2Test Report2021-12-23PDF 2.9 MB
2AJOTTA-1404_C2PC Declaration LetterCover Letter(s)2022-11-07PDF 497.6 KB
2AJOTTA-1404_cvrltr_Adhoc Mode DeclarationCover Letter(s)2022-11-07PDF 116.5 KB
Declaration of authorizationCover Letter(s)2022-11-07PDF 182.5 KB
FCC Confidentiality request letter for Short Term ConfidentialityCover Letter(s)2022-11-07PDF 181.3 KB
U-NII Device Declaration LetterCover Letter(s)2022-11-07PDF 160.1 KB
Declaration of authorizationCover Letter(s)2021-12-24PDF 122.8 KB
FCC Confidentiality request letter for ConfidentialityCover Letter(s)2021-12-24PDF 111.1 KB
FCC Confidentiality request letter for Short Term ConfidentialityCover Letter(s)2021-12-24PDF 111.6 KB
FCC Wifi DeclarationCover Letter(s)2021-12-24PDF 98.3 KB
Operation Description for sofware securityCover Letter(s)2021-12-24PDF 180.5 KB
U-NII Device Declaration LetterCover Letter(s)2021-12-24PDF 112.2 KB
FCC SAR report part1RF Exposure Info2022-11-07PDF 2 MB
FCC SAR report part2RF Exposure Info2022-11-07PDF 2.3 MB
FCC SAR report part3RF Exposure Info2022-11-07PDF 5.1 MB
FCC SAR report part4RF Exposure Info2022-11-07PDF 5.3 MB
FCC SAR report part5RF Exposure Info2022-11-07PDF 4.7 MB
FCC SAR report part1RF Exposure Info2021-12-24PDF 2.1 MB
FCC SAR report part10RF Exposure Info2021-12-24PDF 2.7 MB
FCC SAR report part11RF Exposure Info2021-12-24PDF 714 KB
FCC SAR report part2RF Exposure Info2021-12-24PDF 1.3 MB
FCC SAR report part3RF Exposure Info2021-12-24PDF 4.1 MB
FCC SAR report part4RF Exposure Info2021-12-24PDF 5.1 MB
FCC SAR report part5RF Exposure Info2021-12-24PDF 5.3 MB
FCC SAR report part6RF Exposure Info2021-12-24PDF 5.1 MB
FCC SAR report part7RF Exposure Info2021-12-24PDF 5.2 MB
FCC SAR report part8RF Exposure Info2021-12-24PDF 5.3 MB
FCC SAR report part9RF Exposure Info2021-12-24PDF 5.1 MB
Block diagram Metadata onlyBlock DiagramPDF 139.7 KB
Schematic Metadata onlySchematicsPDF 1 MB
Declaration of Power reduce strategy Metadata onlyOperational DescriptionPDF 62.9 KB
Operation Description for sofware security Metadata onlyOperational DescriptionPDF 150.7 KB
Operation description Metadata onlyOperational DescriptionPDF 337.6 KB
Part list Metadata onlyParts List/Tune Up InfoPDF 154.5 KB
Tune UP Procedure Metadata onlyParts List/Tune Up InfoPDF 2.4 MB

Application Information

Application IDkHWYMaIL7KKU9z/n1FnF/w==
Final Action Date2022-11-07
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0025864240
ModelTA-1404
Equipment ClassJBP - Part 15 Class B Computing Device Peripheral
Device DescriptionMulti-band GSM/WCDMA/LTE phone with Bluetooth&WLAN;
Responsible PartyReza Serafat, General Manager, Quality and Customer Compliance, reza.serafat@hmdglobal.com , +491735287964
Test FirmEdwin Ye, BV 7Layers Communications Technology (Shenzhen) Co, edwin.ye@bureauveritas.com , 86-20-8714 8549
TCB Emailtcb-essen@cetecom.com
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityYes
Short-Term Confidentiality Date04/25/2023
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive change: a. Change packaging factory of the chip (new SoC with new packaging material); b. Removed Aohai_A829US adapter, BRL_CB - 36A USB cable, Saibao_CB - 12A USB cable, LEADER_HS-34 earphone; c. Added Saibao_AC-2A USB Cable; d. The software version is changed to 00WW_1_520, RF performance is exactly same with the previous version.

Applications

Application IDDatePurpose
kHWYMaIL7KKU9z/n1FnF/w==2022-11-07Class II permissive change or modification of presently authorized equipment
X+Msu4390U6/HZTyoKQlmg==2022-11-07Class II permissive change or modification of presently authorized equipment
TM0j+vwU38DwAG5typqZLQ==2022-11-07Class II permissive change or modification of presently authorized equipment
SkjbaGxqtVGUR4dEXf8NHQ==2022-11-07Class II permissive change or modification of presently authorized equipment
8rFb6cYzTACNGd5mDBfM4Q==2022-11-07Class II permissive change or modification of presently authorized equipment
C566G5CdCZd5L1etEZX3PA==2021-12-24Original Equipment
0Nx/aQHTTrSQkTXvDpEGRg==2021-12-24Original Equipment
sEGWg1s7OjaAcoJs9csEuA==2021-12-23Original Equipment
HFFB2RIHYyi6JCxAmIPrPQ==2021-12-23Original Equipment
4V8LzpZKsu11fJerxk/GPw==2021-12-23Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
15BCC
699.7-715.3 MHz0.063972.5ppm1M12W7D27
704-711 MHz0.080542.5ppm9M08G7D27
704-711 MHz0.063832.5ppm9M10W7D27
709-711 MHz0.074992.5ppm9M09G7D27
709-711 MHz0.061942.5ppm9M10W7D27
782 MHz0.078162.5ppm9M04G7D27
782 MHz0.068552.5ppm9M04W7D27
826.4-846.6 MHz0.083372.5ppm4M18F9W22H
826.4-846.6 MHz0.082042.5ppm4M18F9W22H
826.5-846.5 MHz0.06732.5ppm4M57W7D22H
829-844 MHz0.074642.5ppm9M10G7D22H
829-844 MHz0.066682.5ppm9M08W7D22H
1712.4-1752.6 MHz0.237682.5ppm4M17F9W27
1720-1745 MHz0.218782.5ppm18M2G7D27
1720-1745 MHz0.192752.5ppm18M2W7D27
1720-1770 MHz0.233882.5ppm18M2G7D27
1720-1770 MHz0.198152.5ppm18M2W7D27
1850.2-1909.8 MHz1.183042.5ppm249KGXW24E
1850.2-1909.8 MHz0.642692.5ppm258KG7W24E
1852.4-1907.6 MHz0.318422.5ppm4M18F9W24E
1860-1900 MHz0.317692.5ppm18M2G7D24E
1860-1900 MHz0.264242.5ppm18M2W7D24E
2402-2480 MHz0.009290015CCC
2402-2480 MHz0.0014915CCC
2412-2462 MHz0.1849315CCC
2510-2560 MHz0.214292.5ppm18M2G7D27
2510-2560 MHz0.183652.5ppm18M2W7D27
5180-5240 MHz0.0809115ECC
5260-5320 MHz0.085915ECC, ND
5500-5700 MHz0.0841415ECC, ND
5745-5825 MHz0.0849215ECC

Grants

TCB Grant - Application X+Msu4390U6/HZTyoKQlmg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM GmbH
Im Teelbruch 116
45219 Essen,
Germany
Date of Grant: 11/07/2022

Application Dated: 11/07/2022
HMD global Oy
Bertel Jungin aukio 9
Espoo, 02600
Finland
 
Attention: Reza Serafat , General Manager, Quality and Customer Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJOTTA-1404
Name of Grantee:  HMD global Oy
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Multi-band GSM/WCDMA/LTE phone with Bluetooth&WLAN
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 0.5445 2.5  PM 248KGXW
22H 824.2  -  848.8 0.12706 2.5  PM 256KG7W
22H 826.4  -  846.6 0.08204 2.5  PM 4M18F9W
24E 1850.2  -  1909.8 1.18304 2.5  PM 249KGXW
24E 1850.2  -  1909.8 0.64269 2.5  PM 258KG7W
24E 1852.4  -  1907.6 0.31842 2.5  PM 4M18F9W
27 1712.4  -  1752.6 0.23768 2.5  PM 4M17F9W
24E 1860.0  -  1900.0 0.31769 2.5  PM 18M2G7D
24E 1860.0  -  1900.0 0.26424 2.5  PM 18M2W7D
27 1720.0  -  1745.0 0.21878 2.5  PM 18M2G7D
27 1720.0  -  1745.0 0.19275 2.5  PM 18M2W7D
22H 826.5  -  846.5 0.0673 2.5  PM 4M57W7D
22H 829.0  -  844.0 0.07464 2.5  PM 9M10G7D
22H 829.0  -  844.0 0.06668 2.5  PM 9M08W7D
27 2510.0  -  2560.0 0.21429 2.5  PM 18M2G7D
27 2510.0  -  2560.0 0.18365 2.5  PM 18M2W7D
27 699.7  -  715.3 0.06397 2.5  PM 1M12W7D
27 704.0  -  711.0 0.08054 2.5  PM 9M08G7D
27 704.0  -  711.0 0.06383 2.5  PM 9M10W7D
27 782.0  -  782.0 0.07816 2.5  PM 9M04G7D
27 782.0  -  782.0 0.06855 2.5  PM 9M04W7D
27 709.0  -  711.0 0.07499 2.5  PM 9M09G7D
27 709.0  -  711.0 0.06194 2.5  PM 9M10W7D
27 1720.0  -  1770.0 0.23388 2.5  PM 18M2G7D
27 1720.0  -  1770.0 0.19815 2.5  PM 18M2W7D

Class II Permissive change:

a. Change packaging factory of the chip (new SoC with new packaging material);

b. Removed Aohai_A829US adapter, BRL_CB - 36A USB cable, Saibao_CB - 12A USB cable, LEADER_HS-34 earphone;

c. Added Saibao_AC-2A USB Cable;

d. The software version is changed to 00WW_1_520, RF performance is exactly same with the previous version.

Output power listed is ERP for Part 22H for frequencies below 1 GHz, and EIRP for Part 24E and 27 for frequencies above 1 GHz. This device also contains Bluetooth, BLE and WLAN transmitters. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure. This device supports bandwidths of 5/10/15/20 MHz for LTE Band 7, 38, 41. The highest reported SAR for head, body-worn accessory, product specific (wireless router), product specific (phablet-10g), and simultaneous transmission (head/body and extremity) exposure conditions are 0.34 W/kg, 1.08 W/kg, 1.14 W/kg, 2.13 W/kg (10g) and 1.56 W/kg/2.73 W/kg (10g).


EAS Grant - Application X+Msu4390U6/HZTyoKQlmg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HMD global Oy
Bertel Jungin aukio 9
Espoo, 02600
Finland
  Date of Grant: 11/07/2022

Application Dated: 11/07/2022
 
Attention: Reza Serafat , General Manager, Quality and Customer Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJOTTA-1404
Name of Grantee:  HMD global Oy
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Multi-band GSM/WCDMA/LTE phone with Bluetooth&WLAN
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 0.5445 2.5  PM 248KGXW
22H 824.2  -  848.8 0.12706 2.5  PM 256KG7W
22H 826.4  -  846.6 0.08204 2.5  PM 4M18F9W
24E 1850.2  -  1909.8 1.18304 2.5  PM 249KGXW
24E 1850.2  -  1909.8 0.64269 2.5  PM 258KG7W
24E 1852.4  -  1907.6 0.31842 2.5  PM 4M18F9W
27 1712.4  -  1752.6 0.23768 2.5  PM 4M17F9W
24E 1860.0  -  1900.0 0.31769 2.5  PM 18M2G7D
24E 1860.0  -  1900.0 0.26424 2.5  PM 18M2W7D
27 1720.0  -  1745.0 0.21878 2.5  PM 18M2G7D
27 1720.0  -  1745.0 0.19275 2.5  PM 18M2W7D
22H 826.5  -  846.5 0.0673 2.5  PM 4M57W7D
22H 829.0  -  844.0 0.07464 2.5  PM 9M10G7D
22H 829.0  -  844.0 0.06668 2.5  PM 9M08W7D
27 2510.0  -  2560.0 0.21429 2.5  PM 18M2G7D
27 2510.0  -  2560.0 0.18365 2.5  PM 18M2W7D
27 699.7  -  715.3 0.06397 2.5  PM 1M12W7D
27 704.0  -  711.0 0.08054 2.5  PM 9M08G7D
27 704.0  -  711.0 0.06383 2.5  PM 9M10W7D
27 782.0  -  782.0 0.07816 2.5  PM 9M04G7D
27 782.0  -  782.0 0.06855 2.5  PM 9M04W7D
27 709.0  -  711.0 0.07499 2.5  PM 9M09G7D
27 709.0  -  711.0 0.06194 2.5  PM 9M10W7D
27 1720.0  -  1770.0 0.23388 2.5  PM 18M2G7D
27 1720.0  -  1770.0 0.19815 2.5  PM 18M2W7D

Class II Permissive change:

a. Change packaging factory of the chip (new SoC with new packaging material);

b. Removed Aohai_A829US adapter, BRL_CB - 36A USB cable, Saibao_CB - 12A USB cable, LEADER_HS-34 earphone;

c. Added Saibao_AC-2A USB Cable;

d. The software version is changed to 00WW_1_520, RF performance is exactly same with the previous version.

Output power listed is ERP for Part 22H for frequencies below 1 GHz, and EIRP for Part 24E and 27 for frequencies above 1 GHz. This device also contains Bluetooth, BLE and WLAN transmitters. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure. This device supports bandwidths of 5/10/15/20 MHz for LTE Band 7, 38, 41. The highest reported SAR for head, body-worn accessory, product specific (wireless router), product specific (phablet-10g), and simultaneous transmission (head/body and extremity) exposure conditions are 0.34 W/kg, 1.08 W/kg, 1.14 W/kg, 2.13 W/kg (10g) and 1.56 W/kg/2.73 W/kg (10g).



TCB Grant - Application TM0j+vwU38DwAG5typqZLQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM GmbH
Im Teelbruch 116
45219 Essen,
Germany
Date of Grant: 11/07/2022

Application Dated: 11/07/2022
HMD global Oy
Bertel Jungin aukio 9
Espoo, 02600
Finland
 
Attention: Reza Serafat , General Manager, Quality and Customer Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJOTTA-1404
Name of Grantee:  HMD global Oy
Equipment Class: Digital Transmission System
Notes: Multi-band GSM/WCDMA/LTE phone with Bluetooth&WLAN
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00149  
CC 15C 2412.0  -  2462.0 0.18493  

Class II Permissive change:

a. Change packaging factory of the chip (new SoC with new packaging material); b. Removed Aohai_A829US adapter, BRL_CB - 36A USB cable, Saibao_CB - 12A USB cable, LEADER_HS-34 earphone; c. Added Saibao_AC-2A USB Cable; d. The software version is changed to 00WW_1_520, RF performance is exactly same with the previous version.

Output power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode for WLAN 2.4 GHz. This devise also contains GSM, WCDMA, LTE and Bluetooth transmitters. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.93 W/kg, 0.34 W/kg, 0.34 W/kg, and 1.56 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application TM0j+vwU38DwAG5typqZLQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HMD global Oy
Bertel Jungin aukio 9
Espoo, 02600
Finland
  Date of Grant: 11/07/2022

Application Dated: 11/07/2022
 
Attention: Reza Serafat , General Manager, Quality and Customer Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJOTTA-1404
Name of Grantee:  HMD global Oy
Equipment Class: Digital Transmission System
Notes: Multi-band GSM/WCDMA/LTE phone with Bluetooth&WLAN
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00149  
CC 15C 2412.0  -  2462.0 0.18493  

Class II Permissive change:

a. Change packaging factory of the chip (new SoC with new packaging material); b. Removed Aohai_A829US adapter, BRL_CB - 36A USB cable, Saibao_CB - 12A USB cable, LEADER_HS-34 earphone; c. Added Saibao_AC-2A USB Cable; d. The software version is changed to 00WW_1_520, RF performance is exactly same with the previous version.

Output power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode for WLAN 2.4 GHz. This devise also contains GSM, WCDMA, LTE and Bluetooth transmitters. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.93 W/kg, 0.34 W/kg, 0.34 W/kg, and 1.56 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application SkjbaGxqtVGUR4dEXf8NHQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM GmbH
Im Teelbruch 116
45219 Essen,
Germany
Date of Grant: 11/07/2022

Application Dated: 11/07/2022
HMD global Oy
Bertel Jungin aukio 9
Espoo, 02600
Finland
 
Attention: Reza Serafat , General Manager, Quality and Customer Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJOTTA-1404
Name of Grantee:  HMD global Oy
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Multi-band GSM/WCDMA/LTE phone with Bluetooth&WLAN
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.08091  
CC ND 15E 5260.0  -  5320.0 0.0859  
CC ND 15E 5500.0  -  5700.0 0.08414  
CC 15E 5745.0  -  5825.0 0.08492  

Class II Permissive change:

a. Change packaging factory of the chip (new SoC with new packaging material);

b. Removed Aohai_A829US adapter, BRL_CB - 36A USB cable, Saibao_CB - 12A USB cable, LEADER_HS-34 earphone;

c. Added Saibao_AC-2A USB Cable;

d. The software version is changed to 00WW_1_520, RF performance is exactly same with the previous version.

Output power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz, and 80 MHz bandwidth mode for WLAN 5 GHz as a client device for all bands. This devise also contains GSM, WCDMA, LTE and Bluetooth transmitters. Approval is for operation as a client device without radar detection. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), product specific (phablet-10g), and simultaneous transmission (head/body and extremity) exposure conditions are 0.71 W/kg, 0.74 W/kg, 0.73 W/kg, 2.13 W/kg (10g) and 1.56W/kg/2.73W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application SkjbaGxqtVGUR4dEXf8NHQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HMD global Oy
Bertel Jungin aukio 9
Espoo, 02600
Finland
  Date of Grant: 11/07/2022

Application Dated: 11/07/2022
 
Attention: Reza Serafat , General Manager, Quality and Customer Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJOTTA-1404
Name of Grantee:  HMD global Oy
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Multi-band GSM/WCDMA/LTE phone with Bluetooth&WLAN
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.08091  
CC ND 15E 5260.0  -  5320.0 0.0859  
CC ND 15E 5500.0  -  5700.0 0.08414  
CC 15E 5745.0  -  5825.0 0.08492  

Class II Permissive change:

a. Change packaging factory of the chip (new SoC with new packaging material);

b. Removed Aohai_A829US adapter, BRL_CB - 36A USB cable, Saibao_CB - 12A USB cable, LEADER_HS-34 earphone;

c. Added Saibao_AC-2A USB Cable;

d. The software version is changed to 00WW_1_520, RF performance is exactly same with the previous version.

Output power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz, and 80 MHz bandwidth mode for WLAN 5 GHz as a client device for all bands. This devise also contains GSM, WCDMA, LTE and Bluetooth transmitters. Approval is for operation as a client device without radar detection. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), product specific (phablet-10g), and simultaneous transmission (head/body and extremity) exposure conditions are 0.71 W/kg, 0.74 W/kg, 0.73 W/kg, 2.13 W/kg (10g) and 1.56W/kg/2.73W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application sEGWg1s7OjaAcoJs9csEuA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM GmbH
Im Teelbruch 116
45219 Essen,
Germany
Date of Grant: 12/23/2021

Application Dated: 12/23/2021
HMD global Oy
Bertel Jungin aukio 9
Espoo, 02600
Finland
 
Attention: Reza Serafat , General Manager, Quality and Customer Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJOTTA-1404
Name of Grantee:  HMD global Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Multi-band GSM/WCDMA/LTE phone with Bluetooth&WLAN
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00929  

Output power listed is peak conducted. This devise also contains GSM, WCDMA, LTE and Bluetooth transmitters. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are < 0.10 W/kg, < 0.10 W/kg, < 0.10 W/kg, and 1.54 W/kg respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application sEGWg1s7OjaAcoJs9csEuA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HMD global Oy
Bertel Jungin aukio 9
Espoo, 02600
Finland
  Date of Grant: 12/23/2021

Application Dated: 12/23/2021
 
Attention: Reza Serafat , General Manager, Quality and Customer Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJOTTA-1404
Name of Grantee:  HMD global Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Multi-band GSM/WCDMA/LTE phone with Bluetooth&WLAN
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00929  

Output power listed is peak conducted. This devise also contains GSM, WCDMA, LTE and Bluetooth transmitters. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are < 0.10 W/kg, < 0.10 W/kg, < 0.10 W/kg, and 1.54 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application kHWYMaIL7KKU9z/n1FnF/w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM GmbH
Im Teelbruch 116
45219 Essen,
Germany
Date of Grant: 11/07/2022

Application Dated: 11/07/2022
HMD global Oy
Bertel Jungin aukio 9
Espoo, 02600
Finland
 
Attention: Reza Serafat , General Manager, Quality and Customer Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJOTTA-1404
Name of Grantee:  HMD global Oy
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Multi-band GSM/WCDMA/LTE phone with Bluetooth&WLAN
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 

Class II Permissive change:

a. Change packaging factory of the chip (new SoC with new packaging material);

b. Removed Aohai_A829US adapter, BRL_CB - 36A USB cable, Saibao_CB - 12A USB cable, LEADER_HS-34 earphone;

c. Added Saibao_AC-2A USB Cable;

d. The software version is changed to 00WW_1_520, RF performance is exactly same with the previous version.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application kHWYMaIL7KKU9z/n1FnF/w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HMD global Oy
Bertel Jungin aukio 9
Espoo, 02600
Finland
  Date of Grant: 11/07/2022

Application Dated: 11/07/2022
 
Attention: Reza Serafat , General Manager, Quality and Customer Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJOTTA-1404
Name of Grantee:  HMD global Oy
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Multi-band GSM/WCDMA/LTE phone with Bluetooth&WLAN
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 

Class II Permissive change:

a. Change packaging factory of the chip (new SoC with new packaging material);

b. Removed Aohai_A829US adapter, BRL_CB - 36A USB cable, Saibao_CB - 12A USB cable, LEADER_HS-34 earphone;

c. Added Saibao_AC-2A USB Cable;

d. The software version is changed to 00WW_1_520, RF performance is exactly same with the previous version.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application HFFB2RIHYyi6JCxAmIPrPQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM GmbH
Im Teelbruch 116
45219 Essen,
Germany
Date of Grant: 12/23/2021

Application Dated: 12/23/2021
HMD global Oy
Bertel Jungin aukio 9
Espoo, 02600
Finland
 
Attention: Reza Serafat , General Manager, Quality and Customer Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJOTTA-1404
Name of Grantee:  HMD global Oy
Equipment Class: Digital Transmission System
Notes: Multi-band GSM/WCDMA/LTE phone with Bluetooth&WLAN
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00149  
CC 15C 2412.0  -  2462.0 0.18493  

Output power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode for WLAN 2.4 GHz. This devise also contains GSM, WCDMA, LTE and Bluetooth transmitters. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 1.00 W/kg, 0.46 W/kg, 0.46 W/kg, and 1.54 W/kg respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application HFFB2RIHYyi6JCxAmIPrPQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HMD global Oy
Bertel Jungin aukio 9
Espoo, 02600
Finland
  Date of Grant: 12/23/2021

Application Dated: 12/23/2021
 
Attention: Reza Serafat , General Manager, Quality and Customer Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJOTTA-1404
Name of Grantee:  HMD global Oy
Equipment Class: Digital Transmission System
Notes: Multi-band GSM/WCDMA/LTE phone with Bluetooth&WLAN
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00149  
CC 15C 2412.0  -  2462.0 0.18493  

Output power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode for WLAN 2.4 GHz. This devise also contains GSM, WCDMA, LTE and Bluetooth transmitters. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 1.00 W/kg, 0.46 W/kg, 0.46 W/kg, and 1.54 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application C566G5CdCZd5L1etEZX3PA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM GmbH
Im Teelbruch 116
45219 Essen,
Germany
Date of Grant: 12/24/2021

Application Dated: 12/23/2021
HMD global Oy
Bertel Jungin aukio 9
Espoo, 02600
Finland
 
Attention: Reza Serafat , General Manager, Quality and Customer Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJOTTA-1404
Name of Grantee:  HMD global Oy
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Multi-band GSM/WCDMA/LTE phone with Bluetooth&WLAN
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 0.5445 2.5  PM 248KGXW
22H 824.2  -  848.8 0.12706 2.5  PM 256KG7W
22H 826.4  -  846.6 0.08337 2.5  PM 4M18F9W
24E 1850.2  -  1909.8 1.18304 2.5  PM 249KGXW
24E 1850.2  -  1909.8 0.64269 2.5  PM 258KG7W
24E 1852.4  -  1907.6 0.31842 2.5  PM 4M18F9W
27 1712.4  -  1752.6 0.23768 2.5  PM 4M17F9W
24E 1860.0  -  1900.0 0.31769 2.5  PM 18M2G7D
24E 1860.0  -  1900.0 0.26424 2.5  PM 18M2W7D
27 1720.0  -  1745.0 0.21878 2.5  PM 18M2G7D
27 1720.0  -  1745.0 0.19275 2.5  PM 18M2W7D
22H 826.5  -  846.5 0.0673 2.5  PM 4M57W7D
22H 829.0  -  844.0 0.07464 2.5  PM 9M10G7D
22H 829.0  -  844.0 0.06668 2.5  PM 9M08W7D
27 2510.0  -  2560.0 0.21429 2.5  PM 18M2G7D
27 2510.0  -  2560.0 0.18365 2.5  PM 18M2W7D
27 699.7  -  715.3 0.06397 2.5  PM 1M12W7D
27 704.0  -  711.0 0.08054 2.5  PM 9M08G7D
27 704.0  -  711.0 0.06383 2.5  PM 9M10W7D
27 782.0  -  782.0 0.07816 2.5  PM 9M04G7D
27 782.0  -  782.0 0.06855 2.5  PM 9M04W7D
27 709.0  -  711.0 0.07499 2.5  PM 9M09G7D
27 709.0  -  711.0 0.06194 2.5  PM 9M10W7D
27 1720.0  -  1770.0 0.23388 2.5  PM 18M2G7D
27 1720.0  -  1770.0 0.19815 2.5  PM 18M2W7D

Output power listed is ERP for Part 22H and 27 for frequencies below 1 GHz, and EIRP for Part 24E and 27 for frequencies above 1 GHz. This device also contains Bluetooth, BLE and WLAN transmitters. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure. This device supports bandwidths of 5/10/15/20 MHz for LTE Bands 7, bandwidths of 1.4/3/5/10 MHz for LTE Band 5, 12, bandwidths of 5/10 MHz for LTE Bands 13, 17, bandwidths of 1.4/3/5/10/15/20 MHz for LTE Bands 2, 4, 66. The highest reported SAR for head, body-worn accessory, product specific (wireless router), product specific (phablet-10g), and simultaneous transmission (head/body and extremity) exposure conditions are 0.31 W/kg, 1.10 W/kg, 1.15 W/kg, 2.16 W/kg (10g) and 1.54 W/kg/2.71 W/kg (10g).

EAS Grant - Application C566G5CdCZd5L1etEZX3PA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HMD global Oy
Bertel Jungin aukio 9
Espoo, 02600
Finland
  Date of Grant: 12/24/2021

Application Dated: 12/23/2021
 
Attention: Reza Serafat , General Manager, Quality and Customer Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJOTTA-1404
Name of Grantee:  HMD global Oy
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Multi-band GSM/WCDMA/LTE phone with Bluetooth&WLAN
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 0.5445 2.5  PM 248KGXW
22H 824.2  -  848.8 0.12706 2.5  PM 256KG7W
22H 826.4  -  846.6 0.08337 2.5  PM 4M18F9W
24E 1850.2  -  1909.8 1.18304 2.5  PM 249KGXW
24E 1850.2  -  1909.8 0.64269 2.5  PM 258KG7W
24E 1852.4  -  1907.6 0.31842 2.5  PM 4M18F9W
27 1712.4  -  1752.6 0.23768 2.5  PM 4M17F9W
24E 1860.0  -  1900.0 0.31769 2.5  PM 18M2G7D
24E 1860.0  -  1900.0 0.26424 2.5  PM 18M2W7D
27 1720.0  -  1745.0 0.21878 2.5  PM 18M2G7D
27 1720.0  -  1745.0 0.19275 2.5  PM 18M2W7D
22H 826.5  -  846.5 0.0673 2.5  PM 4M57W7D
22H 829.0  -  844.0 0.07464 2.5  PM 9M10G7D
22H 829.0  -  844.0 0.06668 2.5  PM 9M08W7D
27 2510.0  -  2560.0 0.21429 2.5  PM 18M2G7D
27 2510.0  -  2560.0 0.18365 2.5  PM 18M2W7D
27 699.7  -  715.3 0.06397 2.5  PM 1M12W7D
27 704.0  -  711.0 0.08054 2.5  PM 9M08G7D
27 704.0  -  711.0 0.06383 2.5  PM 9M10W7D
27 782.0  -  782.0 0.07816 2.5  PM 9M04G7D
27 782.0  -  782.0 0.06855 2.5  PM 9M04W7D
27 709.0  -  711.0 0.07499 2.5  PM 9M09G7D
27 709.0  -  711.0 0.06194 2.5  PM 9M10W7D
27 1720.0  -  1770.0 0.23388 2.5  PM 18M2G7D
27 1720.0  -  1770.0 0.19815 2.5  PM 18M2W7D

Output power listed is ERP for Part 22H and 27 for frequencies below 1 GHz, and EIRP for Part 24E and 27 for frequencies above 1 GHz. This device also contains Bluetooth, BLE and WLAN transmitters. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure. This device supports bandwidths of 5/10/15/20 MHz for LTE Bands 7, bandwidths of 1.4/3/5/10 MHz for LTE Band 5, 12, bandwidths of 5/10 MHz for LTE Bands 13, 17, bandwidths of 1.4/3/5/10/15/20 MHz for LTE Bands 2, 4, 66. The highest reported SAR for head, body-worn accessory, product specific (wireless router), product specific (phablet-10g), and simultaneous transmission (head/body and extremity) exposure conditions are 0.31 W/kg, 1.10 W/kg, 1.15 W/kg, 2.16 W/kg (10g) and 1.54 W/kg/2.71 W/kg (10g).



TCB Grant - Application 8rFb6cYzTACNGd5mDBfM4Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM GmbH
Im Teelbruch 116
45219 Essen,
Germany
Date of Grant: 11/07/2022

Application Dated: 11/07/2022
HMD global Oy
Bertel Jungin aukio 9
Espoo, 02600
Finland
 
Attention: Reza Serafat , General Manager, Quality and Customer Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJOTTA-1404
Name of Grantee:  HMD global Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Multi-band GSM/WCDMA/LTE phone with Bluetooth&WLAN
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00929  

Class II Permissive change:

a. Change packaging factory of the chip (new SoC with new packaging material);

b. Removed Aohai_A829US adapter, BRL_CB - 36A USB cable, Saibao_CB - 12A USB cable, LEADER_HS-34 earphone;

c. Added Saibao_AC-2A USB Cable;

d. The software version is changed to 00WW_1_520, RF performance is exactly same with the previous version.

Output power listed is peak conducted. This devise also contains GSM, WCDMA, LTE and Bluetooth transmitters. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.12 W/kg, < 0.10 W/kg, < 0.10 W/kg, and 1.56 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 8rFb6cYzTACNGd5mDBfM4Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HMD global Oy
Bertel Jungin aukio 9
Espoo, 02600
Finland
  Date of Grant: 11/07/2022

Application Dated: 11/07/2022
 
Attention: Reza Serafat , General Manager, Quality and Customer Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJOTTA-1404
Name of Grantee:  HMD global Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Multi-band GSM/WCDMA/LTE phone with Bluetooth&WLAN
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00929  

Class II Permissive change:

a. Change packaging factory of the chip (new SoC with new packaging material);

b. Removed Aohai_A829US adapter, BRL_CB - 36A USB cable, Saibao_CB - 12A USB cable, LEADER_HS-34 earphone;

c. Added Saibao_AC-2A USB Cable;

d. The software version is changed to 00WW_1_520, RF performance is exactly same with the previous version.

Output power listed is peak conducted. This devise also contains GSM, WCDMA, LTE and Bluetooth transmitters. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.12 W/kg, < 0.10 W/kg, < 0.10 W/kg, and 1.56 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 4V8LzpZKsu11fJerxk/GPw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM GmbH
Im Teelbruch 116
45219 Essen,
Germany
Date of Grant: 12/23/2021

Application Dated: 12/23/2021
HMD global Oy
Bertel Jungin aukio 9
Espoo, 02600
Finland
 
Attention: Reza Serafat , General Manager, Quality and Customer Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJOTTA-1404
Name of Grantee:  HMD global Oy
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Multi-band GSM/WCDMA/LTE phone with Bluetooth&WLAN
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 


EAS Grant - Application 4V8LzpZKsu11fJerxk/GPw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HMD global Oy
Bertel Jungin aukio 9
Espoo, 02600
Finland
  Date of Grant: 12/23/2021

Application Dated: 12/23/2021
 
Attention: Reza Serafat , General Manager, Quality and Customer Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJOTTA-1404
Name of Grantee:  HMD global Oy
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Multi-band GSM/WCDMA/LTE phone with Bluetooth&WLAN
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 



TCB Grant - Application 0Nx/aQHTTrSQkTXvDpEGRg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM GmbH
Im Teelbruch 116
45219 Essen,
Germany
Date of Grant: 12/24/2021

Application Dated: 12/23/2021
HMD global Oy
Bertel Jungin aukio 9
Espoo, 02600
Finland
 
Attention: Reza Serafat , General Manager, Quality and Customer Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJOTTA-1404
Name of Grantee:  HMD global Oy
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Multi-band GSM/WCDMA/LTE phone with Bluetooth&WLAN
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.08091  
CC ND 15E 5260.0  -  5320.0 0.0859  
CC ND 15E 5500.0  -  5700.0 0.08414  
CC 15E 5745.0  -  5825.0 0.08492  

Output power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz, and 80 MHz bandwidth mode for WLAN 5 GHz as a client device for all bands. This devise also contains GSM, WCDMA, LTE and Bluetooth transmitters. Approval is for operation as a client device without radar detection. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (phablet-10g), and simultaneous transmission (head/body and extremity) exposure conditions are 0.70 W/kg, 0.74 W/kg, 0.79 W/kg, 1.29 W/kg (10g) and 1.54W/kg/2.71W/kg respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application 0Nx/aQHTTrSQkTXvDpEGRg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HMD global Oy
Bertel Jungin aukio 9
Espoo, 02600
Finland
  Date of Grant: 12/24/2021

Application Dated: 12/23/2021
 
Attention: Reza Serafat , General Manager, Quality and Customer Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJOTTA-1404
Name of Grantee:  HMD global Oy
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Multi-band GSM/WCDMA/LTE phone with Bluetooth&WLAN
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.08091  
CC ND 15E 5260.0  -  5320.0 0.0859  
CC ND 15E 5500.0  -  5700.0 0.08414  
CC 15E 5745.0  -  5825.0 0.08492  

Output power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz, and 80 MHz bandwidth mode for WLAN 5 GHz as a client device for all bands. This devise also contains GSM, WCDMA, LTE and Bluetooth transmitters. Approval is for operation as a client device without radar detection. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (phablet-10g), and simultaneous transmission (head/body and extremity) exposure conditions are 0.70 W/kg, 0.74 W/kg, 0.79 W/kg, 1.29 W/kg (10g) and 1.54W/kg/2.71W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: