1. FCC ID
  2. 2AJVK
  3. 2AJVK-SP4013

FCC ID 2AJVK-SP4013

Smart Phone

by Foto Electric Supply Co., INC.

Grantee Code: 2AJVK   Product Code: SP4013
Latest application date: 2016-11-24

FCC ID Device Details

FCC ID2AJVK-SP4013
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AJVK
Product CodeSP4013
Applicant BusinessFoto Electric Supply Co., INC. 🇺🇸
Related Domains fescony.com
Equipment ClassSmart Phone
Test FirmWaltek Services(Shenzhen) Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2016-11-24
824.2-848.8 MHzOriginal Equipment2016-11-24
2402-2480 MHzOriginal Equipment2016-11-24

Exhibits

DocumentTypeAvailableFile
User Manual Metadata onlyTest Setup Photos2016-11-24PDF 653.3 KB
User ManualUsers Manual2016-11-24PDF 653.3 KB
Internal PhotosInternal Photos2016-11-24PDF 938.2 KB
External PhotosExternal Photos2016-11-24PDF 654.3 KB
Label and Label LocationID Label/Location Info2016-11-24PDF 159.2 KB
Test Set-up photosTest Setup Photos2016-11-24PDF 219.3 KB
Test set-up photosTest Setup Photos2016-11-24PDF 296.8 KB
Test set-up photosTest Setup Photos2016-11-24PDF 273.3 KB
SAR Test ReportRF Exposure Info2016-11-24PDF 4.6 MB
Test ReportTest Report2016-11-24PDF 412.2 KB
Test reportTest Report2016-11-24PDF 925.2 KB
Test reportTest Report2016-11-24PDF 1.9 MB
Test reportTest Report2016-11-24PDF 2.6 MB
Letter of AgencyAttestation Statements2016-11-24PDF 293.3 KB
BT HoppingCover Letter(s)2016-11-24PDF 80.7 KB
BT Hopping descriptionCover Letter(s)2016-11-24PDF 80.7 KB
Confidentiality RequestCover Letter(s)2016-11-24PDF 407.2 KB
FCC Justification letterCover Letter(s)2016-11-24PDF 89.5 KB
Model Difference statementCover Letter(s)2016-11-24PDF 105 KB
Model Differences StatementCover Letter(s)2016-11-24PDF 105 KB
TCB Agency letterCover Letter(s)2016-11-24PDF 25 KB
RF ExposureRF Exposure Info2016-11-24PDF 62.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 404.7 KB
Schematics Metadata onlySchematicsPDF 2.2 MB
Operational Description Metadata onlyOperational DescriptionPDF 291.5 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 90.1 KB
Tune up information Metadata onlyParts List/Tune Up InfoPDF 185.8 KB
Tune-up procedure Metadata onlyParts List/Tune Up InfoPDF 185.8 KB

Application Information

Application IDvW+6vBSOsYp41PJgrgjoxw==
Final Action Date2016-11-24
Application PurposeOriginal Equipment
Applicant FRN0025902875
ModelSP4013
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionSmart Phone
Responsible PartyJared Melnicoff, Director Sourcing, jaredm@fescony.com , 212-260-0666
Test Firmphilo zhong, Waltek Services(Shenzhen) Co., Ltd., philo@waltek.com.cn , 8675527553488
TCB EmailRoy.ediss@element.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsRF output power is conducted The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures; SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filling. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filling, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between device and the user’s body. End-users must be informed of the body-worn operating requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.53W/kg, 0.81W/kg, 0.81W/kg and 0.99W/kg respectively.

Applications

Application IDDatePurpose
vW+6vBSOsYp41PJgrgjoxw==2016-11-24Original Equipment
m0/h2tC3Rd5ehBumWHb49Q==2016-11-24Original Equipment
XlUzWi2A0zW3qVfhYc1rWw==2016-11-24Original Equipment
1q7G8TSSDMQG74JWXQlYiw==2016-11-24Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824.2-848.8 MHz1.1532.5ppm246KGXW22H
826.4-846.6 MHz0.052.5ppm4M16F9W22H
826.4-846.6 MHz0.0572.5ppm4M16F9W22H
826.4-846.6 MHz0.0532.5ppm4M15F9W22H
1850.2-1909.8 MHz0.9332.5ppm245KGXW24E
1850.2-1909.8 MHz0.9572.5ppm246KGXW24E
1852.4-1907.6 MHz0.1442.5ppm4M22F9W24E
1852.4-1907.6 MHz0.1592.5ppm4M22F9W24E
1852.4-1907.6 MHz0.162.5ppm4M23F9W24E
2402-2480 MHz0.003000015C
2402-2480 MHz0.00115C
2412-2462 MHz0.00915C

Grants

TCB Grant - Application XlUzWi2A0zW3qVfhYc1rWw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Warwick Ltd
Rothwell Road Warwick
Warwick, CV34 5JX
United Kingdom 		Date of Grant: 11/24/2016

Application Dated: 11/23/2016
Foto Electric Supply Co., INC.
1 Rewe St. Brooklyn, New York
New York, NY 11211
 
Attention: Jared Melnicoff , Director Sourcing

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJVK-SP4013
Name of Grantee:  Foto Electric Supply Co., INC.
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Smart Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.119 2.5  PM 245KGXW
22H 824.2  -  848.8 1.153 2.5  PM 246KGXW
22H 826.4  -  846.6 0.05 2.5  PM 4M16F9W
22H 826.4  -  846.6 0.057 2.5  PM 4M16F9W
22H 826.4  -  846.6 0.053 2.5  PM 4M15F9W
24E 1850.2  -  1909.8 0.933 2.5  PM 245KGXW
24E 1850.2  -  1909.8 0.957 2.5  PM 246KGXW
24E 1852.4  -  1907.6 0.159 2.5  PM 4M22F9W
24E 1852.4  -  1907.6 0.16 2.5  PM 4M23F9W
24E 1852.4  -  1907.6 0.144 2.5  PM 4M22F9W

Output power listed is ERP for FCC Rule Part 22H and output power listed is EIRP for FCC Rule Part 24E. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filling. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filling, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between device and the user’s body. End-users must be informed of the body-worn operating requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.53W/kg, 0.81W/kg, 0.81W/kg and 0.99W/kg respectively.

This device also contains functions that are not operational in U.S. Territories. This filling is only applicable for US Operations.


EAS Grant - Application XlUzWi2A0zW3qVfhYc1rWw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Foto Electric Supply Co., INC.
1 Rewe St. Brooklyn, New York
New York, NY 11211
United States 		  Date of Grant: 11/24/2016

Application Dated: 11/23/2016
 
Attention: Jared Melnicoff , Director Sourcing

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJVK-SP4013
Name of Grantee:  Foto Electric Supply Co., INC.
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Smart Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.119 2.5  PM 245KGXW
22H 824.2  -  848.8 1.153 2.5  PM 246KGXW
22H 826.4  -  846.6 0.05 2.5  PM 4M16F9W
22H 826.4  -  846.6 0.057 2.5  PM 4M16F9W
22H 826.4  -  846.6 0.053 2.5  PM 4M15F9W
24E 1850.2  -  1909.8 0.933 2.5  PM 245KGXW
24E 1850.2  -  1909.8 0.957 2.5  PM 246KGXW
24E 1852.4  -  1907.6 0.159 2.5  PM 4M22F9W
24E 1852.4  -  1907.6 0.16 2.5  PM 4M23F9W
24E 1852.4  -  1907.6 0.144 2.5  PM 4M22F9W

Output power listed is ERP for FCC Rule Part 22H and output power listed is EIRP for FCC Rule Part 24E. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filling. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filling, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between device and the user’s body. End-users must be informed of the body-worn operating requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.53W/kg, 0.81W/kg, 0.81W/kg and 0.99W/kg respectively.

This device also contains functions that are not operational in U.S. Territories. This filling is only applicable for US Operations.



TCB Grant - Application vW+6vBSOsYp41PJgrgjoxw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Warwick Ltd
Rothwell Road Warwick
Warwick, CV34 5JX
United Kingdom 		Date of Grant: 11/24/2016

Application Dated: 11/23/2016
Foto Electric Supply Co., INC.
1 Rewe St. Brooklyn, New York
New York, NY 11211
 
Attention: Jared Melnicoff , Director Sourcing

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJVK-SP4013
Name of Grantee:  Foto Electric Supply Co., INC.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Smart Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.003  

RF output power is conducted The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures; SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filling. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filling, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between device and the user’s body. End-users must be informed of the body-worn operating requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.53W/kg, 0.81W/kg, 0.81W/kg and 0.99W/kg respectively.

EAS Grant - Application vW+6vBSOsYp41PJgrgjoxw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Foto Electric Supply Co., INC.
1 Rewe St. Brooklyn, New York
New York, NY 11211
United States 		  Date of Grant: 11/24/2016

Application Dated: 11/23/2016
 
Attention: Jared Melnicoff , Director Sourcing

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJVK-SP4013
Name of Grantee:  Foto Electric Supply Co., INC.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Smart Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.003  

RF output power is conducted The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures; SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filling. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filling, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between device and the user’s body. End-users must be informed of the body-worn operating requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.53W/kg, 0.81W/kg, 0.81W/kg and 0.99W/kg respectively.



TCB Grant - Application m0/h2tC3Rd5ehBumWHb49Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Warwick Ltd
Rothwell Road Warwick
Warwick, CV34 5JX
United Kingdom 		Date of Grant: 11/24/2016

Application Dated: 11/23/2016
Foto Electric Supply Co., INC.
1 Rewe St. Brooklyn, New York
New York, NY 11211
 
Attention: Jared Melnicoff , Director Sourcing

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJVK-SP4013
Name of Grantee:  Foto Electric Supply Co., INC.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Smart Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15B  - 

Pre-defined selectable Grant Comment:

CC: This device is certified pursuant to two different Part 15 rules sections.


EAS Grant - Application m0/h2tC3Rd5ehBumWHb49Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Foto Electric Supply Co., INC.
1 Rewe St. Brooklyn, New York
New York, NY 11211
United States 		  Date of Grant: 11/24/2016

Application Dated: 11/23/2016
 
Attention: Jared Melnicoff , Director Sourcing

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJVK-SP4013
Name of Grantee:  Foto Electric Supply Co., INC.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Smart Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15B  - 

Pre-defined selectable Grant Comment:

CC: This device is certified pursuant to two different Part 15 rules sections.



TCB Grant - Application 1q7G8TSSDMQG74JWXQlYiw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Warwick Ltd
Rothwell Road Warwick
Warwick, CV34 5JX
United Kingdom 		Date of Grant: 11/24/2016

Application Dated: 11/23/2016
Foto Electric Supply Co., INC.
1 Rewe St. Brooklyn, New York
New York, NY 11211
 
Attention: Jared Melnicoff , Director Sourcing

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJVK-SP4013
Name of Grantee:  Foto Electric Supply Co., INC.
Equipment Class: Digital Transmission System
Notes: Smart Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.009  
15C 2402.0  -  2480.0 0.001  

RF output power is conducted This device has 20 MHz and 40 MHz bandwidth modes. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures; End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filling. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filling, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between device and the user’s body. End-users must be informed of the body-worn operating requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.53W/kg, 0.81W/kg, 0.81W/kg and 0.99W/kg respectively.

EAS Grant - Application 1q7G8TSSDMQG74JWXQlYiw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Foto Electric Supply Co., INC.
1 Rewe St. Brooklyn, New York
New York, NY 11211
United States 		  Date of Grant: 11/24/2016

Application Dated: 11/23/2016
 
Attention: Jared Melnicoff , Director Sourcing

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJVK-SP4013
Name of Grantee:  Foto Electric Supply Co., INC.
Equipment Class: Digital Transmission System
Notes: Smart Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.009  
15C 2402.0  -  2480.0 0.001  

RF output power is conducted This device has 20 MHz and 40 MHz bandwidth modes. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures; End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filling. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filling, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between device and the user’s body. End-users must be informed of the body-worn operating requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.53W/kg, 0.81W/kg, 0.81W/kg and 0.99W/kg respectively.



Mail To: