FCC ID 2AJVQ-7618BUC
Wireless Module
by Qingdao Intelligent&Precise; Electronics Co.,Ltd
Grantee Code: 2AJVQ Product Code: 7618BUC
Latest application date: 2021-02-18
FCC ID Device Details
| FCC ID | 2AJVQ-7618BUC |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AJVQ |
| Product Code | 7618BUC |
| Applicant Business | Qingdao Intelligent&Precise; Electronics Co.,Ltd 🇨🇳 |
| Related Domains |  hisense.com |
| Equipment Class | Wireless Module |
| Test Firm | Intertek Testing Services Shanghai |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-02-18 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2021-02-18 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2020-01-22 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2020-01-22 |
| 5180-5240 MHz | Original Equipment | 2019-04-02 |
| 2412-2462 MHz | Original Equipment | 2019-04-02 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual_Rev 1 | Users Manual | 2019-04-02 | PDF 262.3 KB |
| Internal Photos_Rev 1 | Internal Photos | 2019-04-02 | PDF 265.8 KB |
| External Photo | External Photos | 2021-02-18 | PDF 186.6 KB |
| External Photos | External Photos | 2020-01-22 | PDF 261.7 KB |
| External Photos | External Photos | 2019-04-02 | PDF 241.7 KB |
| Label and Location | ID Label/Location Info | 2020-01-22 | PDF 201.9 KB |
| Label and Location | ID Label/Location Info | 2019-04-02 | PDF 128.8 KB |
| Test Setup Photos | Test Setup Photos | 2021-02-18 | PDF 215.1 KB |
| Test Setup Photos | Test Setup Photos | 2020-01-22 | PDF 333.9 KB |
| Test Setup Photos | Test Setup Photos | 2019-04-02 | PDF 337.5 KB |
| Report_15.247-C2PC | Test Report | 2021-02-18 | PDF 1.7 MB |
| Report_15.407-5G WiFi | Test Report | 2021-02-18 | PDF 5.2 MB |
| Report_15.247-C2PC | Test Report | 2020-01-22 | PDF 607.7 KB |
| Report_15.407_C2PC | Test Report | 2020-01-22 | PDF 622 KB |
| Appendix A1_1 | Test Report | 2019-04-02 | PDF 4.9 MB |
| Appendix A1_2 | Test Report | 2019-04-02 | PDF 2.4 MB |
| Appendix A2_1 | Test Report | 2019-04-02 | PDF 4.9 MB |
| Appendix A2_2 | Test Report | 2019-04-02 | PDF 2.4 MB |
| Appendix A3_1 | Test Report | 2019-04-02 | PDF 4.9 MB |
| Appendix A3_2 | Test Report | 2019-04-02 | PDF 1.7 MB |
| Appendix A4_1 | Test Report | 2019-04-02 | PDF 4.9 MB |
| Appendix A4_2 | Test Report | 2019-04-02 | PDF 2.4 MB |
| Report_15.247_1_Rev 2 | Test Report | 2019-04-02 | PDF 3.1 MB |
| Report_15.247_2 | Test Report | 2019-04-02 | PDF 5.4 MB |
| Report_15.247_3 | Test Report | 2019-04-02 | PDF 5.1 MB |
| Report_15.247_4 | Test Report | 2019-04-02 | PDF 5.4 MB |
| Report_15.247_5 | Test Report | 2019-04-02 | PDF 1.4 MB |
| Report_15.407_Rev 1 | Test Report | 2019-04-02 | PDF 1 MB |
| Report_DFS | Test Report | 2019-04-02 | PDF 703.5 KB |
| Cover Letter-FCC PC II | Cover Letter(s) | 2021-02-18 | PDF 196.5 KB |
| FCC-Authority-Letter | Cover Letter(s) | 2021-02-18 | PDF 22.5 KB |
| Cover Letter-FCC PC II | Cover Letter(s) | 2020-01-22 | PDF 27.7 KB |
| FCC-Authority-Letter | Cover Letter(s) | 2020-01-22 | PDF 21 KB |
| FCC-Confidentiality-Letter | Cover Letter(s) | 2020-01-22 | PDF 85.2 KB |
| FCC-Modular-Approval-Letter | Cover Letter(s) | 2020-01-22 | PDF 178.9 KB |
| FCC-Authority-Letter | Cover Letter(s) | 2019-04-02 | PDF 14.9 KB |
| FCC-Confidentiality-Letter | Cover Letter(s) | 2019-04-02 | PDF 84.7 KB |
| FCC-Modular-Approval-Letter | Cover Letter(s) | 2019-04-02 | PDF 19.2 KB |
| Report_FCC_MPE_Rev 1 | RF Exposure Info | 2019-04-02 | PDF 263.4 KB |
| Confidential_Block Diagram Metadata only | Block Diagram | PDF 119.2 KB | |
| Confidential_Block Diagram Metadata only | Block Diagram | PDF 71.4 KB | |
| Confidential_Circuit Diagram Metadata only | Schematics | PDF 125.1 KB | |
| Schematics Metadata only | Schematics | PDF 125.1 KB | |
| Schematics_Rev 1 Metadata only | Schematics | PDF 131.1 KB | |
| Operation description_Rev 1 Metadata only | Operational Description | PDF 143.2 KB | |
| Security for sofware_slave Metadata only | Operational Description | PDF 134.6 KB |
Application Information
| Application ID | M985t6aj21lkYowOtiQ3yg== |
|---|---|
| Final Action Date | 2021-02-18 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0025785783 |
| Model | 7618BUC |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Wireless Module |
| Responsible Party | CaiFeng Li, Engineer, licaifeng@hisense.com , 53280879443 |
| Agent | Intertek Testing Services Shanghai, eric.yw.li@intertek.com  , 86-21-61278265 |
| Technical Contact | Eric Li, Intertek Testing Services Shanghai, eric.yw.li@intertek.com , 86 21 61278265 |
| Test Firm | Leah Xu, Intertek Testing Services Shanghai, leah.xu@intertek.com , +86 21 61278200 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | This is a C2PC application. Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device contains a 2.4GHz WLAN transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| M985t6aj21lkYowOtiQ3yg== | 2021-02-18 | Class II permissive change or modification of presently authorized equipment |
| 9TESM+FZm4RsmjCMW7OYmw== | 2021-02-18 | Class II permissive change or modification of presently authorized equipment |
| fkk6OKmLA1iZFq/Tri9etA== | 2020-01-22 | Class II permissive change or modification of presently authorized equipment |
| QFtFhfpkzRUG097pN0vUrw== | 2020-01-22 | Class II permissive change or modification of presently authorized equipment |
| t6t5OYHkno9VIaKmXMyqjw== | 2019-04-02 | Original Equipment |
| RMG5RZ9gIIrd9+lt5drImQ== | 2019-04-02 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2412-2462 MHz | 0.0530000 | 15C | CC, MO |
| 2412-2462 MHz | 0.0550000 | 15C | CC, MO |
| 5180-5240 MHz | 0.047 | 15E | CC, MO |
| 5180-5240 MHz | 0.048 | 15E | CC, MO |
| 5260-5320 MHz | 0.046 | 15E | CC, MO, ND |
| 5260-5320 MHz | 0.047 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.046 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.053 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.048 | 15E | CC, MO |
| 5745-5825 MHz | 0.051 | 15E | CC, MO |
Grants
TCB Grant - Application t6t5OYHkno9VIaKmXMyqjw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/02/2019 Application Dated: 04/02/2019 |
| Qingdao Intelligent&Precise Electronics Co.,Ltd |
| No218,Qianwangang Road |
| Qingdao Economic&Technological Development ZoneP.O. Box 266071, |
| Qingdao, 266071 China |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-7618BUC |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.048 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.047 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.053 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.051 |
| Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device contains 2.4G WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application t6t5OYHkno9VIaKmXMyqjw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qingdao Intelligent&Precise Electronics Co.,Ltd No218,Qianwangang Road Qingdao Economic&Technological Development ZoneP.O. Box 266071, Qingdao, 266071 China |
Date of Grant: 04/02/2019 Application Dated: 04/02/2019 |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-7618BUC |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.048 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.047 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.053 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.051 |
| Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device contains 2.4G WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/02/2019 Application Dated: 04/02/2019 |
| Qingdao Intelligent&Precise Electronics Co.,Ltd |
| No218,Qianwangang Road |
| Qingdao Economic&Technological Development ZoneP.O. Box 266071, |
| Qingdao, 266071 China |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-7618BUC |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.055 |
| Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes. This device contains 5G WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application RMG5RZ9gIIrd9+lt5drImQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qingdao Intelligent&Precise Electronics Co.,Ltd No218,Qianwangang Road Qingdao Economic&Technological Development ZoneP.O. Box 266071, Qingdao, 266071 China |
Date of Grant: 04/02/2019 Application Dated: 04/02/2019 |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-7618BUC |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.055 |
| Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes. This device contains 5G WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 01/22/2020 Application Dated: 01/20/2020 |
| Qingdao Intelligent&Precise Electronics Co.,Ltd |
| No218,Qianwangang Road |
| Qingdao Economic&Technological Development ZoneP.O. Box 266071, |
| Qingdao, 266071 China |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-7618BUC |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.048 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.047 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.053 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.051 |
| This is a C2PC application. Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device contains a 2.4G WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application QFtFhfpkzRUG097pN0vUrw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qingdao Intelligent&Precise Electronics Co.,Ltd No218,Qianwangang Road Qingdao Economic&Technological Development ZoneP.O. Box 266071, Qingdao, 266071 China |
Date of Grant: 01/22/2020 Application Dated: 01/20/2020 |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-7618BUC |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.048 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.047 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.053 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.051 |
| This is a C2PC application. Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device contains a 2.4G WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 02/18/2021 Application Dated: 02/18/2021 |
| Qingdao Intelligent&Precise Electronics Co.,Ltd |
| No218,Qianwangang Road |
| Qingdao Economic&Technological Development ZoneP.O. Box 266071, |
| Qingdao, 266071 China |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-7618BUC |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.047 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.046 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.048 |
| This is a C2PC application. Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device contains a 2.4GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application M985t6aj21lkYowOtiQ3yg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qingdao Intelligent&Precise Electronics Co.,Ltd No218,Qianwangang Road Qingdao Economic&Technological Development ZoneP.O. Box 266071, Qingdao, 266071 China |
Date of Grant: 02/18/2021 Application Dated: 02/18/2021 |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-7618BUC |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.047 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.046 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.048 |
| This is a C2PC application. Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device contains a 2.4GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 01/22/2020 Application Dated: 01/20/2020 |
| Qingdao Intelligent&Precise Electronics Co.,Ltd |
| No218,Qianwangang Road |
| Qingdao Economic&Technological Development ZoneP.O. Box 266071, |
| Qingdao, 266071 China |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-7618BUC |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.055 |
| This is a C2PC application. Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes. This device contains a 5G WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application fkk6OKmLA1iZFq/Tri9etA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qingdao Intelligent&Precise Electronics Co.,Ltd No218,Qianwangang Road Qingdao Economic&Technological Development ZoneP.O. Box 266071, Qingdao, 266071 China |
Date of Grant: 01/22/2020 Application Dated: 01/20/2020 |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-7618BUC |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.055 |
| This is a C2PC application. Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes. This device contains a 5G WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 02/18/2021 Application Dated: 02/18/2021 |
| Qingdao Intelligent&Precise Electronics Co.,Ltd |
| No218,Qianwangang Road |
| Qingdao Economic&Technological Development ZoneP.O. Box 266071, |
| Qingdao, 266071 China |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-7618BUC |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.053 |
| This is a C2PC application. Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes. This device contains a 5GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 9TESM+FZm4RsmjCMW7OYmw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qingdao Intelligent&Precise Electronics Co.,Ltd No218,Qianwangang Road Qingdao Economic&Technological Development ZoneP.O. Box 266071, Qingdao, 266071 China |
Date of Grant: 02/18/2021 Application Dated: 02/18/2021 |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-7618BUC |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.053 |
| This is a C2PC application. Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes. This device contains a 5GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |