FCC ID 2AJVQ-MWH412B
WiFi Module
by Qingdao Intelligent&Precise; Electronics Co.,Ltd
Grantee Code: 2AJVQ Product Code: MWH412B
Latest application date: 2024-04-19
FCC ID Device Details
| FCC ID | 2AJVQ-MWH412B |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AJVQ |
| Product Code | MWH412B |
| Applicant Business | Qingdao Intelligent&Precise; Electronics Co.,Ltd 🇨🇳 |
| Related Domains |  hisense.com |
| Equipment Class | WiFi Module |
| Test Firm | The State Radio_monitoring_center Testing Center |
Linked Records
Barcode records decoded from published FCC label exhibits or linked by an explicit FCC ID reference on a product page.
| UPC / GTIN | Linked product |
|---|---|
| 032582413626 UPC-A · GTIN-14 00032582413626 | WiFi Module MWH412B Brand: Qingdao Intelligent&Precise; Electronics Co.,Ltd · Model: MWH412B Source: FCC label |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2024-04-19 |
| 5180-5240 MHz | Original Equipment | 2024-04-19 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2024-04-19 | PDF 335.3 KB |
| Internal_photo | Internal Photos | 2024-04-19 | PDF 222.4 KB |
| EXternal_photo | External Photos | 2024-04-19 | PDF 254.1 KB |
| Label | ID Label/Location Info | 2024-04-19 | PDF 198.7 KB |
| Test_Setup_Photos | Test Setup Photos | 2024-04-19 | PDF 1.8 MB |
| -24031102(G)_AppendixA1-1 | Test Report | 2024-04-19 | PDF 4.4 MB |
| -24031102(G)_AppendixA1-2 | Test Report | 2024-04-19 | PDF 2.8 MB |
| -24031102(G)_AppendixA2-1 | Test Report | 2024-04-19 | PDF 4.3 MB |
| -24031102(G)_AppendixA2-2 | Test Report | 2024-04-19 | PDF 2.8 MB |
| -24031102(G)_AppendixA3-1 | Test Report | 2024-04-19 | PDF 4.6 MB |
| -24031102(G)_AppendixA3-2 | Test Report | 2024-04-19 | PDF 4.1 MB |
| -24031102(G)_AppendixA4-1 | Test Report | 2024-04-19 | PDF 4.4 MB |
| -24031102(G)_AppendixA4-2 | Test Report | 2024-04-19 | PDF 5 MB |
| -24031102(G)_AppendixB-1 | Test Report | 2024-04-19 | PDF 5 MB |
| -24031102(G)_AppendixB-2 | Test Report | 2024-04-19 | PDF 776.1 KB |
| 02-MWH412_ANT_Details-20240418 | Test Report | 2024-04-19 | PDF 1 MB |
| MWH412B_Ipex_pullout_Antenna-SPEC-202212 | Test Report | 2024-04-19 | PDF 1.2 MB |
| SRTC2024-9004(F)-24031102(F)_WLAN2.4G-1 | Test Report | 2024-04-19 | PDF 4.7 MB |
| SRTC2024-9004(F)-24031102(F)_WLAN2.4G-2 | Test Report | 2024-04-19 | PDF 4.4 MB |
| SRTC2024-9004(F)-24031102(F)_WLAN2.4G-3 | Test Report | 2024-04-19 | PDF 4.8 MB |
| SRTC2024-9004(F)-24031102(F)_WLAN2.4G-4 | Test Report | 2024-04-19 | PDF 4.8 MB |
| SRTC2024-9004(F)-24031102(G)_WLAN5GHz | Test Report | 2024-04-19 | PDF 880.9 KB |
| Attestation_Statements_Part2.911(d)(5) | Attestation Statements | 2024-04-19 | PDF 69 KB |
| Attestation_Statements_Part2.911(d)(7) | Attestation Statements | 2024-04-19 | PDF 366.1 KB |
| Confidentiality_Request_Letter | Cover Letter(s) | 2024-04-19 | PDF 101 KB |
| DTS_UNII_DeclarationLetter | Cover Letter(s) | 2024-04-19 | PDF 97.5 KB |
| Declaration_Channel_Limitation | Cover Letter(s) | 2024-04-19 | PDF 36.2 KB |
| Modular_Approval_Request | Cover Letter(s) | 2024-04-19 | PDF 265.2 KB |
| POA | Cover Letter(s) | 2024-04-19 | PDF 99.6 KB |
| SRTC2024-9004(F)-24031102(I)_MPE | RF Exposure Info | 2024-04-19 | PDF 235 KB |
| Block_Diagram Metadata only | Block Diagram | PDF 243.4 KB | |
| SCH Metadata only | Schematics | PDF 93.2 KB | |
| OP_Antenna_combination Metadata only | Operational Description | PDF 69.9 KB | |
| Operational_Description Metadata only | Operational Description | PDF 412 KB | |
| Description_No_software_version_MWH412B Metadata only | SDR Software/Security Info. | PDF 82.9 KB | |
| Software_Security_Info Metadata only | SDR Software/Security Info. | PDF 158.4 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 87.5 KB |
Application Information
| Application ID | d57Q7ddiCbcKSwF0W63MAQ== |
|---|---|
| Final Action Date | 2024-04-19 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0025785783 |
| Model | MWH412B |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WiFi Module |
| Responsible Party | Haining Wang, Certification Engineer, wanghaining@hisense.com , 13381232625 |
| Test Firm | Sun Yang, The State Radio_monitoring_center Testing Center, sunyang@srtc.org.cn  , +86-10-57996131 |
| TCB Email | bentje.holger@phoenix-testlab.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power is maximum peak conducted.This device supports WIFI 802.11 b/g/n20 and 40 MHz channel bandwidth. This device has integrated DTS and NII transmitters certified under the same FCC ID.Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| d57Q7ddiCbcKSwF0W63MAQ== | 2024-04-19 | Original Equipment |
| G8vl4VcRX5LSbtDC17OHpQ== | 2024-04-19 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application G8vl4VcRX5LSbtDC17OHpQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 04/19/2024 Application Dated: 04/19/2024 |
| Qingdao Intelligent&Precise Electronics Co.,Ltd |
| No218,Qianwangang Road |
| Qingdao Economic&Technological Development ZoneP.O. Box 266071, |
| Qingdao, 266071 China |
| Attention: Haining Wang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-MWH412B |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.044 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.035 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.039 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.039 |
| Output power is maximum average conducted. This device supports IEEE 802.11 a/n 20 and 40 MHz channel bandwidths. This device has integrated DTS and NII transmitters certified under the same FCC ID. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application G8vl4VcRX5LSbtDC17OHpQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qingdao Intelligent&Precise Electronics Co.,Ltd No218,Qianwangang Road Qingdao Economic&Technological Development ZoneP.O. Box 266071, Qingdao, 266071 China |
Date of Grant: 04/19/2024 Application Dated: 04/19/2024 |
| Attention: Haining Wang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-MWH412B |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.044 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.035 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.039 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.039 |
| Output power is maximum average conducted. This device supports IEEE 802.11 a/n 20 and 40 MHz channel bandwidths. This device has integrated DTS and NII transmitters certified under the same FCC ID. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 04/19/2024 Application Dated: 04/19/2024 |
| Qingdao Intelligent&Precise Electronics Co.,Ltd |
| No218,Qianwangang Road |
| Qingdao Economic&Technological Development ZoneP.O. Box 266071, |
| Qingdao, 266071 China |
| Attention: Haining Wang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-MWH412B |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.164 |
| Output power is maximum peak conducted. This device supports WIFI 802.11 b/g/n20 and 40 MHz channel bandwidth. This device has integrated DTS and NII transmitters certified under the same FCC ID. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application d57Q7ddiCbcKSwF0W63MAQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qingdao Intelligent&Precise Electronics Co.,Ltd No218,Qianwangang Road Qingdao Economic&Technological Development ZoneP.O. Box 266071, Qingdao, 266071 China |
Date of Grant: 04/19/2024 Application Dated: 04/19/2024 |
| Attention: Haining Wang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-MWH412B |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.164 |
| Output power is maximum peak conducted. This device supports WIFI 802.11 b/g/n20 and 40 MHz channel bandwidth. This device has integrated DTS and NII transmitters certified under the same FCC ID. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |