FCC ID 2AJVQ-MWH428B

WiFi/BT Module

by Qingdao Intelligent&Precise Electronics Co.,Ltd

Grantee Code: 2AJVQ   Product Code: MWH428B
Latest application date: 2025-12-26

FCC ID Device Details

FCC ID2AJVQ-MWH428B
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AJVQ
Product CodeMWH428B
Applicant BusinessQingdao Intelligent&Precise Electronics Co.,Ltd 🇨🇳
Related Domains hisense.com fccusagent.com
Equipment ClassWiFi/BT Module
Test FirmDEKRA Testing and Certification (Suzhou) Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5745-5825 MHzOriginal Equipment2025-12-26
2412-2462 MHzOriginal Equipment2025-12-26
2402-2480 MHzOriginal Equipment2025-12-26

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2026-06-24PDF 370.1 KB
Int photoInternal Photos2026-06-24PDF 2.2 MB
Ext photoExternal Photos2026-06-24PDF 1.2 MB
Label and LocationID Label/Location Info2025-12-26PDF 169.3 KB
Test setup photoTest Setup Photos2026-06-24PDF 990.5 KB
ANT Details-BT_1Test Report2025-12-26PDF 5 MB
ANT Details-BT_2Test Report2025-12-26PDF 3.3 MB
ANT Details-WIFI 1Test Report2025-12-26PDF 1 MB
ANT Details-WIFI 2Test Report2025-12-26PDF 4 MB
Test Report_2.4G WIFI 1Test Report2025-12-26PDF 5.3 MB
Test Report_2.4G WIFI 2Test Report2025-12-26PDF 5.5 MB
Test Report_5GWIFI 1Test Report2025-12-26PDF 5.4 MB
Test Report_5GWIFI 2Test Report2025-12-26PDF 5.4 MB
Test Report_5GWIFI 3Test Report2025-12-26PDF 5.4 MB
Test Report_5GWIFI 4Test Report2025-12-26PDF 3.7 MB
Test Report_BLETest Report2025-12-26PDF 5.9 MB
Test Report_BT 1Test Report2025-12-26PDF 5.3 MB
Test Report_BT 2Test Report2025-12-26PDF 3.7 MB
Test Report_DFSTest Report2025-12-26PDF 861.3 KB
Attestation Statements-KasperskyAttestation Statements2025-12-26PDF 145.4 KB
Attestation Statements-Not CoveredAttestation Statements2025-12-26PDF 113 KB
US Agent attestationAttestation Statements2025-12-26PDF 203.2 KB
Confidentiality requestCover Letter(s)2025-12-26PDF 95.4 KB
Modular Approval LetterCover Letter(s)2025-12-26PDF 98.5 KB
POACover Letter(s)2025-12-26PDF 89.4 KB
Software Configuration Control DeclarationCover Letter(s)2025-12-26PDF 125.4 KB
RF exposureRF Exposure Info2025-12-26PDF 549.7 KB
Block Diagram Metadata onlyBlock DiagramPDF 274.4 KB
Schematics Metadata onlySchematicsPDF 92.9 KB
Operational Description Metadata onlyOperational DescriptionPDF 786.2 KB
NII Security request Metadata onlySDR Software/Security Info.PDF 455.6 KB

Application Information

Application IDSRHDjHHE8Rvk+hKfkzdJqg==
Final Action Date2025-12-26
Application PurposeOriginal Equipment
Applicant FRN0025785783
ModelMWH428B
Frequency Range5745-5825 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWiFi/BT Module
Responsible PartyPeng Wang, wangpeng19@hisense.com , 18724717972
Non-Technical ContactTim Payne, FCC US Agent, LLC, Support@FCCUSAgent.com , 708-571-3148
Test FirmJennifer Jiang, DEKRA Testing and Certification (Suzhou) Co., Ltd., jennifer.jiang@dekra.com , +86 512 6251 5088
TCB Emailjoe_chew@derycom-us.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Long-Term ConfidentialityYes
Modular EquipmentDoes not apply
Composite DeviceYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
SRHDjHHE8Rvk+hKfkzdJqg==2025-12-26Original Equipment
M3yVnWIGrqdQjQO1ISPNgA==2025-12-26Original Equipment
LsyIbWiCYevgwUvnYcwByg==2025-12-26Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
5180-5240 MHz0.040415ECC MO
5260-5320 MHz0.040915ECC MO ND
5500-5700 MHz0.040415ECC MO ND
5745-5825 MHz0.040915ECC MO
2402-2480 MHz0.007515CCC
2412-2462 MHz0.040315CCC MO
2402-2480 MHz0.011315CCC

Grants

TCB Grant - Application SRHDjHHE8Rvk+hKfkzdJqg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  DERYCOM CERTIFICATION SERVICES, INC.
1100 Falcon Avenue
Glencoe, MN 55336
Date of Grant: 12/26/2025

Application Dated: 12/26/2025
Qingdao Intelligent&Precise Electronics Co.,Ltd
No218,Qianwangang Road
Qingdao Economic&Technological Development Zone P.O. Box 266071,
Qingdao, 266071
China
 
Attention: Peng Wang , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJVQ-MWH428B
Name of Grantee:  Qingdao Intelligent&Precise Electronics Co.,Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi/BT Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0404  
CC MO ND 15E 5260.0  -  5320.0 0.0409  
CC MO ND 15E 5500.0  -  5700.0 0.0404  
CC MO 15E 5745.0  -  5825.0 0.0409  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application M3yVnWIGrqdQjQO1ISPNgA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  DERYCOM CERTIFICATION SERVICES, INC.
1100 Falcon Avenue
Glencoe, MN 55336
Date of Grant: 12/26/2025

Application Dated: 12/26/2025
Qingdao Intelligent&Precise Electronics Co.,Ltd
No218,Qianwangang Road
Qingdao Economic&Technological Development Zone P.O. Box 266071,
Qingdao, 266071
China
 
Attention: Peng Wang , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJVQ-MWH428B
Name of Grantee:  Qingdao Intelligent&Precise Electronics Co.,Ltd
Equipment Class: Digital Transmission System
Notes: WiFi/BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0075  
CC MO 15C 2412.0  -  2462.0 0.0403  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application LsyIbWiCYevgwUvnYcwByg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  DERYCOM CERTIFICATION SERVICES, INC.
1100 Falcon Avenue
Glencoe, MN 55336
Date of Grant: 12/26/2025

Application Dated: 12/26/2025
Qingdao Intelligent&Precise Electronics Co.,Ltd
No218,Qianwangang Road
Qingdao Economic&Technological Development Zone P.O. Box 266071,
Qingdao, 266071
China
 
Attention: Peng Wang , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJVQ-MWH428B
Name of Grantee:  Qingdao Intelligent&Precise Electronics Co.,Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WiFi/BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0113  

Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.