FCC ID 2AJVQ-RK8812CU
Wireless module
by Qingdao Intelligent&Precise; Electronics Co.,Ltd
Grantee Code: 2AJVQ Product Code: RK8812CU
Latest application date: 2023-01-10
FCC ID Device Details
| FCC ID | 2AJVQ-RK8812CU |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AJVQ |
| Product Code | RK8812CU |
| Applicant Business | Qingdao Intelligent&Precise; Electronics Co.,Ltd 🇨🇳 |
| Related Domains |  hisense.com |
| Equipment Class | Wireless module |
| Test Firm | Intertek Testing Services Shanghai |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2023-01-10 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2023-01-10 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2021-05-20 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-05-20 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-02-01 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2021-02-01 |
| 2412-2462 MHz | Original Equipment | 2020-11-13 |
| 5180-5240 MHz | Original Equipment | 2020-11-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| 5.user manual-ZDRK8812CU -ed1 | Users Manual | 2020-11-13 | PDF 386.9 KB |
| Internal photo | Internal Photos | 2023-01-10 | PDF 187.9 KB |
| Internal Photos | Internal Photos | 2020-11-13 | PDF 237.8 KB |
| External Photos | External Photos | 2023-01-10 | PDF 646.1 KB |
| External Photo | External Photos | 2021-05-20 | PDF 129.9 KB |
| External photos | External Photos | 2021-02-01 | PDF 222.3 KB |
| External Photos | External Photos | 2020-11-13 | PDF 257.5 KB |
| Label Location | ID Label/Location Info | 2023-01-10 | PDF 146.1 KB |
| 7.Label Location-ZDRK8812CU | ID Label/Location Info | 2020-11-13 | PDF 108 KB |
| Test Setup Photos | Test Setup Photos | 2023-01-10 | PDF 552.4 KB |
| Test Setup Photos | Test Setup Photos | 2021-05-20 | PDF 293.3 KB |
| Test Setup Photos | Test Setup Photos | 2021-02-01 | PDF 96.7 KB |
| Test Setup Photos-ed1 | Test Setup Photos | 2020-11-13 | PDF 192.7 KB |
| Report_15.247-WIFI | Test Report | 2023-01-10 | PDF 898.6 KB |
| Report_15.407-5G WiFi rev1 | Test Report | 2023-01-10 | PDF 1.5 MB |
| ZDRK8812CU Ipex pullout Antenna | Test Report | 2023-01-10 | PDF 1.2 MB |
| ZDRK8812CU Steel ANT SPEC | Test Report | 2023-01-10 | PDF 1.4 MB |
| Report_15.247-C2PC | Test Report | 2021-05-20 | PDF 1.7 MB |
| Report_15.407-5G WiFi | Test Report | 2021-05-20 | PDF 2.6 MB |
| Report_15.247-C2PC-ed1 | Test Report | 2021-02-01 | PDF 478.9 KB |
| Report_15.407-5G WiFi-ed1 | Test Report | 2021-02-01 | PDF 588.4 KB |
| Appendix A1_1 | Test Report | 2020-11-13 | PDF 5 MB |
| Appendix A1_2 | Test Report | 2020-11-13 | PDF 1.9 MB |
| Appendix A2 | Test Report | 2020-11-13 | PDF 5.3 MB |
| Appendix A3_1 | Test Report | 2020-11-13 | PDF 4.8 MB |
| Appendix A3_2 | Test Report | 2020-11-13 | PDF 1.8 MB |
| Appendix A4 | Test Report | 2020-11-13 | PDF 5.3 MB |
| Appendix A5 | Test Report | 2020-11-13 | PDF 766.1 KB |
| Report_15.247-WIFI-ed1_1 | Test Report | 2020-11-13 | PDF 5.5 MB |
| Report_15.247-WIFI-ed1_2 | Test Report | 2020-11-13 | PDF 5.3 MB |
| Report_15.247-WIFI-ed1_3 | Test Report | 2020-11-13 | PDF 5.1 MB |
| Report_15.247-WIFI-ed1_4 | Test Report | 2020-11-13 | PDF 5.2 MB |
| Report_15.247-WIFI-ed1_5 | Test Report | 2020-11-13 | PDF 3.1 MB |
| Report_15.407-5G WiFi-ed1 | Test Report | 2020-11-13 | PDF 1.1 MB |
| Report_DFS | Test Report | 2020-11-13 | PDF 721 KB |
| ACB-Form-FCC-Application-Letters Agent | Cover Letter(s) | 2023-01-10 | PDF 80.7 KB |
| ACB-Form-FCC-Application-Letters Confidentiality | Cover Letter(s) | 2023-01-10 | PDF 86.1 KB |
| FCC- C2PC-Cover Letter | Cover Letter(s) | 2023-01-10 | PDF 30.4 KB |
| Cover Letter-FCC PC II | Cover Letter(s) | 2021-05-20 | PDF 164.8 KB |
| FCC-Authority-Letter | Cover Letter(s) | 2021-05-20 | PDF 22.5 KB |
| Cover Letter-FCC PC II-ed2 | Cover Letter(s) | 2021-02-01 | PDF 155.9 KB |
| 1.FCC-Authority-Letter | Cover Letter(s) | 2020-11-13 | PDF 22.5 KB |
| 2.FCC-Confidentiality-Letter | Cover Letter(s) | 2020-11-13 | PDF 91.6 KB |
| ACB-FORM-FCC-Modular-Letter-ed1 | Cover Letter(s) | 2020-11-13 | PDF 221.8 KB |
| Declaration letter for channel 12 and 13 | Cover Letter(s) | 2020-11-13 | PDF 18.6 KB |
| Report_FCC_MPE-ed2 | RF Exposure Info | 2021-05-20 | PDF 322.4 KB |
| Report_FCC_MPE-ed1 | RF Exposure Info | 2020-11-13 | PDF 320.1 KB |
| Confidential_10. Block Diagram-ZDRK8812CU Metadata only | Block Diagram | PDF 55.3 KB | |
| Confidential_Schematic Metadata only | Schematics | PDF 234 KB | |
| Confidential_Schematic-ZDRK8812CU-ed1 Metadata only | Schematics | PDF 178.1 KB | |
| Confidential_8.Operation Description-ed1 Metadata only | Operational Description | PDF 233.7 KB | |
| Security for sofware_slave-ed1 Metadata only | Operational Description | PDF 160.1 KB |
Application Information
| Application ID | v4n8EZRssfBpb4NuZqTOqA== |
|---|---|
| Final Action Date | 2023-01-10 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0025785783 |
| Model | RK8812CU |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Wireless module |
| Responsible Party | CaiFeng Li, Engineer, licaifeng@hisense.com , 53280879443 |
| Technical Contact | Dylan Tang, Intertek Testing Services Limited Shanghai, Dylan.tang@intertek.com  , +862161215125 |
| Test Firm | Leah Xu, Intertek Testing Services Shanghai, leah.xu@intertek.com , +86 21 61278200 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4GHz or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This is a C2PC application as described in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| v4n8EZRssfBpb4NuZqTOqA== | 2023-01-10 | Class II permissive change or modification of presently authorized equipment |
| 44ftwqRL3uxE1LOeor8drw== | 2023-01-10 | Class II permissive change or modification of presently authorized equipment |
| IqlceJD6BqeS3fDm3qM7ZA== | 2021-05-20 | Class II permissive change or modification of presently authorized equipment |
| 1lp5kRDrEMoeXteC5DAQZA== | 2021-05-20 | Class II permissive change or modification of presently authorized equipment |
| gR45TRifuaRRfJYE0GTVfQ== | 2021-02-01 | Class II permissive change or modification of presently authorized equipment |
| ZYp6rYCHQi1h7Mwz8bu/nw== | 2021-02-01 | Class II permissive change or modification of presently authorized equipment |
| g/++q9qvzOhtJ16u1Zuc9g== | 2020-11-13 | Original Equipment |
| AN/YDkNT5NVoLtthiP6vAw== | 2020-11-13 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2412-2462 MHz | 0.0420000 | 15C | CC, MO |
| 2412-2462 MHz | 0.0400000 | 15C | CC, MO |
| 5180-5240 MHz | 0.072 | 15E | CC, MO |
| 5180-5240 MHz | 0.074 | 15E | CC, MO |
| 5260-5320 MHz | 0.058 | 15E | CC, MO, ND |
| 5260-5320 MHz | 0.06 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.056 | 15E | CC, MO, ND |
| 5600-5700 MHz | 0.056 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.059 | 15E | CC, MO |
| 5745-5825 MHz | 0.062 | 15E | CC, MO |
Grants
TCB Grant - Application ZYp6rYCHQi1h7Mwz8bu/nw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 02/01/2021 Application Dated: 02/01/2021 |
| Qingdao Intelligent&Precise Electronics Co.,Ltd |
| No218,Qianwangang Road |
| Qingdao Economic&Technological Development ZoneP.O. Box 266071, |
| Qingdao, 266071 China |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-RK8812CU |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.042 |
| Class II Permissive Change for the antenna as described in this filing. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz and 40MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4GHz or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application ZYp6rYCHQi1h7Mwz8bu/nw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qingdao Intelligent&Precise Electronics Co.,Ltd No218,Qianwangang Road Qingdao Economic&Technological Development ZoneP.O. Box 266071, Qingdao, 266071 China |
Date of Grant: 02/01/2021 Application Dated: 02/01/2021 |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-RK8812CU |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.042 |
| Class II Permissive Change for the antenna as described in this filing. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz and 40MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4GHz or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 01/10/2023 Application Dated: 01/10/2023 |
| Qingdao Intelligent&Precise Electronics Co.,Ltd |
| No218,Qianwangang Road |
| Qingdao Economic&Technological Development ZoneP.O. Box 266071, |
| Qingdao, 266071 China |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-RK8812CU |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.074 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.06 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.056 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.062 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4GHz or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This is a C2PC application as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application v4n8EZRssfBpb4NuZqTOqA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qingdao Intelligent&Precise Electronics Co.,Ltd No218,Qianwangang Road Qingdao Economic&Technological Development ZoneP.O. Box 266071, Qingdao, 266071 China |
Date of Grant: 01/10/2023 Application Dated: 01/10/2023 |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-RK8812CU |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.074 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.06 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.056 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.062 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4GHz or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This is a C2PC application as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/20/2021 Application Dated: 05/18/2021 |
| Qingdao Intelligent&Precise Electronics Co.,Ltd |
| No218,Qianwangang Road |
| Qingdao Economic&Technological Development ZoneP.O. Box 266071, |
| Qingdao, 266071 China |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-RK8812CU |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.04 |
| Class II Permissive Change for the antenna as described in this filing. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz and 40MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4GHz or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application IqlceJD6BqeS3fDm3qM7ZA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qingdao Intelligent&Precise Electronics Co.,Ltd No218,Qianwangang Road Qingdao Economic&Technological Development ZoneP.O. Box 266071, Qingdao, 266071 China |
Date of Grant: 05/20/2021 Application Dated: 05/18/2021 |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-RK8812CU |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.04 |
| Class II Permissive Change for the antenna as described in this filing. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz and 40MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4GHz or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 02/01/2021 Application Dated: 02/01/2021 |
| Qingdao Intelligent&Precise Electronics Co.,Ltd |
| No218,Qianwangang Road |
| Qingdao Economic&Technological Development ZoneP.O. Box 266071, |
| Qingdao, 266071 China |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-RK8812CU |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.074 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.06 | ||
| CC MO ND | 15E | 5600.0 - 5700.0 | 0.056 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.062 |
| Class II Permissive Change for the antenna as described in this filing. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4GHz or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application gR45TRifuaRRfJYE0GTVfQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qingdao Intelligent&Precise Electronics Co.,Ltd No218,Qianwangang Road Qingdao Economic&Technological Development ZoneP.O. Box 266071, Qingdao, 266071 China |
Date of Grant: 02/01/2021 Application Dated: 02/01/2021 |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-RK8812CU |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.074 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.06 | ||
| CC MO ND | 15E | 5600.0 - 5700.0 | 0.056 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.062 |
| Class II Permissive Change for the antenna as described in this filing. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4GHz or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/13/2020 Application Dated: 11/12/2020 |
| Qingdao Intelligent&Precise Electronics Co.,Ltd |
| No218,Qianwangang Road |
| Qingdao Economic&Technological Development ZoneP.O. Box 266071, |
| Qingdao, 266071 China |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-RK8812CU |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.042 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz and 40MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4GHz or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application g/++q9qvzOhtJ16u1Zuc9g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qingdao Intelligent&Precise Electronics Co.,Ltd No218,Qianwangang Road Qingdao Economic&Technological Development ZoneP.O. Box 266071, Qingdao, 266071 China |
Date of Grant: 11/13/2020 Application Dated: 11/12/2020 |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-RK8812CU |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.042 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz and 40MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4GHz or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/13/2020 Application Dated: 11/12/2020 |
| Qingdao Intelligent&Precise Electronics Co.,Ltd |
| No218,Qianwangang Road |
| Qingdao Economic&Technological Development ZoneP.O. Box 266071, |
| Qingdao, 266071 China |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-RK8812CU |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.074 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.06 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.056 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.062 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4GHz or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application AN/YDkNT5NVoLtthiP6vAw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qingdao Intelligent&Precise Electronics Co.,Ltd No218,Qianwangang Road Qingdao Economic&Technological Development ZoneP.O. Box 266071, Qingdao, 266071 China |
Date of Grant: 11/13/2020 Application Dated: 11/12/2020 |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-RK8812CU |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.074 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.06 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.056 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.062 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4GHz or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 01/10/2023 Application Dated: 01/10/2023 |
| Qingdao Intelligent&Precise Electronics Co.,Ltd |
| No218,Qianwangang Road |
| Qingdao Economic&Technological Development ZoneP.O. Box 266071, |
| Qingdao, 266071 China |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-RK8812CU |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.042 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz and 40MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4GHz or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This is a C2PC application as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 44ftwqRL3uxE1LOeor8drw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qingdao Intelligent&Precise Electronics Co.,Ltd No218,Qianwangang Road Qingdao Economic&Technological Development ZoneP.O. Box 266071, Qingdao, 266071 China |
Date of Grant: 01/10/2023 Application Dated: 01/10/2023 |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-RK8812CU |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.042 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz and 40MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4GHz or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This is a C2PC application as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/20/2021 Application Dated: 05/18/2021 |
| Qingdao Intelligent&Precise Electronics Co.,Ltd |
| No218,Qianwangang Road |
| Qingdao Economic&Technological Development ZoneP.O. Box 266071, |
| Qingdao, 266071 China |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-RK8812CU |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.072 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.058 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.056 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.059 |
| Class II Permissive Change for the antenna as described in this filing. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4GHz or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 1lp5kRDrEMoeXteC5DAQZA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qingdao Intelligent&Precise Electronics Co.,Ltd No218,Qianwangang Road Qingdao Economic&Technological Development ZoneP.O. Box 266071, Qingdao, 266071 China |
Date of Grant: 05/20/2021 Application Dated: 05/18/2021 |
| Attention: CaiFeng Li , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AJVQ-RK8812CU |
| Name of Grantee: | Qingdao Intelligent&Precise Electronics Co.,Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.072 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.058 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.056 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.059 |
| Class II Permissive Change for the antenna as described in this filing. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4GHz or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |