FCC ID 2AJVQ-ZDGFMT7612U

IEEE 802.11 a/b/g/n/ac 2.4GHz+5GHz 2T2R USB Module

by Qingdao Intelligent&Precise; Electronics Co.,Ltd

Grantee Code: 2AJVQ   Product Code: ZDGFMT7612U
Latest application date: 2017-05-03

Device Images

FCC ID Device Details

FCC ID2AJVQ-ZDGFMT7612U
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AJVQ
Product CodeZDGFMT7612U
Applicant BusinessQingdao Intelligent&Precise; Electronics Co.,Ltd 🇨🇳
Related Domains hisense.com
Equipment ClassIEEE 802.11 a/b/g/n/ac 2.4GHz+5GHz 2T2R USB Module
Test FirmEMTEK (Shenzhen) Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2017-05-03
2412-2462 MHzOriginal Equipment2017-05-03

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2017-10-28PDF 427.6 KB
Internal PhotosInternal Photos2017-10-28PDF 185.7 KB
External PhotosExternal Photos2017-10-28PDF 183.2 KB
ID Label and Location InfoID Label/Location Info2017-05-03PDF 53.9 KB
Test Report_DTS_7 of 7 Metadata onlySchematics2017-05-03PDF 5.7 MB
Test Setup photosTest Setup Photos2017-10-28PDF 443.2 KB
Test Setup photosTest Setup Photos2017-10-28PDF 488.5 KB
Test Report_DTS_1 of 7Test Report2017-05-03PDF 727.7 KB
Test Report_DTS_2 of 7Test Report2017-05-03PDF 2.8 MB
Test Report_DTS_3 of 7Test Report2017-05-03PDF 3.1 MB
Test Report_DTS_4 of 7Test Report2017-05-03PDF 5.3 MB
Test Report_DTS_5 of 7Test Report2017-05-03PDF 5.1 MB
Test Report_DTS_6 of 7Test Report2017-05-03PDF 5 MB
Test Report_DTS_7 of 7Test Report2017-05-03PDF 5.7 MB
Test Report_NII_1 of 34Test Report2017-05-03PDF 630.8 KB
Test Report_NII_10 of 34Test Report2017-05-03PDF 5.4 MB
Test Report_NII_11 of 34Test Report2017-05-03PDF 5.4 MB
Test Report_NII_12 of 34Test Report2017-05-03PDF 5.4 MB
Test Report_NII_13 of 34Test Report2017-05-03PDF 5 MB
Test Report_NII_14 of 34Test Report2017-05-03PDF 4.6 MB
Test Report_NII_15 of 34Test Report2017-05-03PDF 4.6 MB
Test Report_NII_16 of 34Test Report2017-05-03PDF 4.6 MB
Test Report_NII_17 of 34Test Report2017-05-03PDF 4.6 MB
Test Report_NII_18 of 34Test Report2017-05-03PDF 4.6 MB
Test Report_NII_19 of 34Test Report2017-05-03PDF 4.6 MB
Test Report_NII_2 of 34Test Report2017-05-03PDF 4.3 MB
Test Report_NII_20 of 34Test Report2017-05-03PDF 4.6 MB
Test Report_NII_21 of 34Test Report2017-05-03PDF 4.6 MB
Test Report_NII_22 of 34Test Report2017-05-03PDF 4.6 MB
Test Report_NII_23 of 34Test Report2017-05-03PDF 4.6 MB
Test Report_NII_24 of 34Test Report2017-05-03PDF 4.6 MB
Test Report_NII_25 of 34Test Report2017-05-03PDF 4.6 MB
Test Report_NII_26 of 34Test Report2017-05-03PDF 4.6 MB
Test Report_NII_27 of 34Test Report2017-05-03PDF 4.6 MB
Test Report_NII_28 of 34Test Report2017-05-03PDF 4.7 MB
Test Report_NII_29 of 34Test Report2017-05-03PDF 4.5 MB
Test Report_NII_3 of 34Test Report2017-05-03PDF 4.3 MB
Test Report_NII_30 of 34Test Report2017-05-03PDF 4.3 MB
Test Report_NII_31 of 34Test Report2017-05-03PDF 4.3 MB
Test Report_NII_32 of 34Test Report2017-05-03PDF 4.3 MB
Test Report_NII_33 of 34Test Report2017-05-03PDF 4.4 MB
Test Report_NII_34 of 34Test Report2017-05-03PDF 5 MB
Test Report_NII_4 of 34Test Report2017-05-03PDF 4.2 MB
Test Report_NII_5 of 34Test Report2017-05-03PDF 3 MB
Test Report_NII_6 of 34Test Report2017-05-03PDF 2.9 MB
Test Report_NII_7 of 34Test Report2017-05-03PDF 5.4 MB
Test Report_NII_8 of 34Test Report2017-05-03PDF 5.4 MB
Test Report_NII_9 of 34Test Report2017-05-03PDF 5.4 MB
Agency LetterCover Letter(s)2017-05-03PDF 105.8 KB
Confidentiality LetterCover Letter(s)2017-05-03PDF 109.2 KB
Declaration Letter of non-US channelCover Letter(s)2017-05-03PDF 77.5 KB
Declaration of DFS bandCover Letter(s)2017-05-03PDF 154.1 KB
Modular Approval LetterCover Letter(s)2017-05-03PDF 92.3 KB
RF Exposure InfoRF Exposure Info2017-05-03PDF 293.5 KB
RF Exposure InfoRF Exposure Info2017-05-03PDF 293.3 KB
Block Diagram Metadata onlyBlock DiagramPDF 105.1 KB
Schematics Metadata onlySchematicsPDF 114.4 KB
Operational Description Metadata onlyOperational DescriptionPDF 129 KB
Operational Description_software security Metadata onlyOperational DescriptionPDF 107.8 KB
Operational Description_technical specification Metadata onlyOperational DescriptionPDF 129 KB

Application Information

Application IDcHr+MCVqrYg/CZcqJnZjHw==
Final Action Date2017-05-03
Application PurposeOriginal Equipment
Applicant FRN0025785783
ModelZDGFMT7612U
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionIEEE 802.11 a/b/g/n/ac 2.4GHz+5GHz 2T2R USB Module
Responsible PartyCaiFeng Li, Engineer, licaifeng@hisense.com , 53280879443
Test FirmDavid Lee, EMTEK (Shenzhen) Co., Ltd., david.lee@emtek.com.cn , 86-755-26504659
TCB Emailfcb@us.tuv.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date10/28/2017
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Power Output listed is conducted. This module is an 802.11n/ac module in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. This transmitter is restricted for use with the specific antenna tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The installation of the transmitter must ensure that the antenna has a separation distance of at least 20 cm from all persons. This device has 20/40/80 MHz bandwidth modes. This device contains a WLAN 802.11 b/g/n transmitter.

Applications

Application IDDatePurpose
cHr+MCVqrYg/CZcqJnZjHw==2017-05-03Original Equipment
X07KBf8BIPV+ykNNAUQd8A==2017-05-03Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.104500015CCC, MO
5180-5240 MHz0.074715E38, CC, MO
5260-5320 MHz0.076515E38, CC, MO
5500-5700 MHz0.062915E38, CC, MO
5745-5825 MHz0.05715E38, CC, MO

Grants

TCB Grant - Application X07KBf8BIPV+ykNNAUQd8A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 05/03/2017

Application Dated: 05/02/2017
Qingdao Intelligent&Precise Electronics Co.,Ltd
No218,Qianwangang Road
Qingdao Economic&Technological Development ZoneP.O. Box 266071,
Qingdao, 266071
China
 
Attention: CaiFeng Li , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJVQ-ZDGFMT7612U
Name of Grantee:  Qingdao Intelligent&Precise Electronics Co.,Ltd
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g/n/ac 2.4GHz+5GHz 2T2R USB Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.1045  

Single Modular Approval. Power Output listed is conducted. This module is an 802.11n module in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. This transmitter is restricted for use with the specific antenna tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The installation of the transmitter must ensure that the antenna has a separation distance of at least 20 cm from all persons. This device has 20/40 MHz bandwidth modes. This device contains a WLAN 802.11 a/n/ac transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application X07KBf8BIPV+ykNNAUQd8A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Qingdao Intelligent&Precise Electronics Co.,Ltd
No218,Qianwangang Road Qingdao Economic&Technological Development ZoneP.O. Box 266071,
Qingdao, 266071
China
  Date of Grant: 05/03/2017

Application Dated: 05/02/2017
 
Attention: CaiFeng Li , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJVQ-ZDGFMT7612U
Name of Grantee:  Qingdao Intelligent&Precise Electronics Co.,Ltd
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g/n/ac 2.4GHz+5GHz 2T2R USB Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.1045  

Single Modular Approval. Power Output listed is conducted. This module is an 802.11n module in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. This transmitter is restricted for use with the specific antenna tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The installation of the transmitter must ensure that the antenna has a separation distance of at least 20 cm from all persons. This device has 20/40 MHz bandwidth modes. This device contains a WLAN 802.11 a/n/ac transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application cHr+MCVqrYg/CZcqJnZjHw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 05/03/2017

Application Dated: 05/02/2017
Qingdao Intelligent&Precise Electronics Co.,Ltd
No218,Qianwangang Road
Qingdao Economic&Technological Development ZoneP.O. Box 266071,
Qingdao, 266071
China
 
Attention: CaiFeng Li , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJVQ-ZDGFMT7612U
Name of Grantee:  Qingdao Intelligent&Precise Electronics Co.,Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 a/b/g/n/ac 2.4GHz+5GHz 2T2R USB Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.0747  
38 CC MO 15E 5260.0  -  5320.0 0.0765  
38 CC MO 15E 5500.0  -  5700.0 0.0629  
38 CC MO 15E 5745.0  -  5825.0 0.057  

Single Modular Approval. Power Output listed is conducted. This module is an 802.11n/ac module in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. This transmitter is restricted for use with the specific antenna tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The installation of the transmitter must ensure that the antenna has a separation distance of at least 20 cm from all persons. This device has 20/40/80 MHz bandwidth modes. This device contains a WLAN 802.11 b/g/n transmitter.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application cHr+MCVqrYg/CZcqJnZjHw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Qingdao Intelligent&Precise Electronics Co.,Ltd
No218,Qianwangang Road Qingdao Economic&Technological Development ZoneP.O. Box 266071,
Qingdao, 266071
China
  Date of Grant: 05/03/2017

Application Dated: 05/02/2017
 
Attention: CaiFeng Li , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJVQ-ZDGFMT7612U
Name of Grantee:  Qingdao Intelligent&Precise Electronics Co.,Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 a/b/g/n/ac 2.4GHz+5GHz 2T2R USB Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.0747  
38 CC MO 15E 5260.0  -  5320.0 0.0765  
38 CC MO 15E 5500.0  -  5700.0 0.0629  
38 CC MO 15E 5745.0  -  5825.0 0.057  

Single Modular Approval. Power Output listed is conducted. This module is an 802.11n/ac module in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. This transmitter is restricted for use with the specific antenna tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The installation of the transmitter must ensure that the antenna has a separation distance of at least 20 cm from all persons. This device has 20/40/80 MHz bandwidth modes. This device contains a WLAN 802.11 b/g/n transmitter.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: