FCC ID 2AK6N-CM276NF
Wi-Fi and BT Module
by UTEC, Inc.
Grantee Code: 2AK6N Product Code: CM276NF
Latest application date: 2026-04-08
FCC ID Device Details
| FCC ID | 2AK6N-CM276NF |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AK6N |
| Product Code | CM276NF |
| Applicant Business | UTEC, Inc. 🇺🇸 |
| Related Domains |  carrier.com |
| Equipment Class | Wi-Fi and BT Module |
| Test Firm | SGS North America, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2026-04-08 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2026-04-08 |
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2026-04-08 |
| 5745-5825 MHz | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CM276NF Grant Date: 07/30/2020 | 2026-02-16 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CM276NF Grant Date: 07/30/2020 | 2026-02-16 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CM276NF Grant Date: 07/30/2020 | 2026-02-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2026-04-08 | PDF 314.7 KB |
| User Manual | Users Manual | 2026-02-16 | PDF 748.6 KB |
| External Photos | External Photos | 2026-02-16 | PDF 225.4 KB |
| Label Location Info | ID Label/Location Info | 2026-02-16 | PDF 225.4 KB |
| Test Setup Photos | Test Setup Photos | 2026-04-08 | PDF 1.5 MB |
| Antenna Datasheet | Test Report | 2026-04-08 | PDF 2.9 MB |
| Test Report 2.4GHz 1 of 2 | Test Report | 2026-04-08 | PDF 4.8 MB |
| Test Report 2.4GHz 2 of 2 | Test Report | 2026-04-08 | PDF 5.1 MB |
| Test Report 5GHz R2 1 of 6 | Test Report | 2026-04-08 | PDF 5.1 MB |
| Test Report 5GHz R2 2 of 6 | Test Report | 2026-04-08 | PDF 4.8 MB |
| Test Report 5GHz R2 3 of 6 | Test Report | 2026-04-08 | PDF 4.6 MB |
| Test Report 5GHz R2 4 of 6 | Test Report | 2026-04-08 | PDF 4.9 MB |
| Test Report 5GHz R2 5 of 6 | Test Report | 2026-04-08 | PDF 4.8 MB |
| Test Report 5GHz R2 6 of 6 | Test Report | 2026-04-08 | PDF 5.2 MB |
| Applicant Declaration Letter | Attestation Statements | 2026-04-08 | PDF 362.3 KB |
| FCC Covered List Attestation | Attestation Statements | 2026-04-08 | PDF 370.4 KB |
| Covered List Attestation Letter | Attestation Statements | 2026-02-16 | PDF 370.4 KB |
| Agent Authorization Letter | Cover Letter(s) | 2026-04-08 | PDF 298 KB |
| C2PC Cover Letter | Cover Letter(s) | 2026-04-08 | PDF 141.2 KB |
| US Agent Letter | Cover Letter(s) | 2026-04-08 | PDF 442.9 KB |
| Change in ID Authorization Letter | Cover Letter(s) | 2026-02-16 | PDF 40.4 KB |
| Change in ID Cover Letter | Cover Letter(s) | 2026-02-16 | PDF 279.3 KB |
| RF Exposure Info | RF Exposure Info | 2026-04-08 | PDF 689.6 KB |
Application Information
| Application ID | nbmRzgSn7F1kP2EVnIaUdA== |
|---|---|
| Final Action Date | 2026-04-08 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0026261842 |
| Model | CM276NF |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wi-Fi and BT Module |
| Responsible Party | SIVA RAMAKRISHNA BOMMARAJU, Compliance_ECOE@carrier.com , 2604667385 |
| Technical Contact | Siva Bommaraju, UTEC, Inc., SivaRamakrishna.Bommaraju@Carrier.com , 260-247-4120 |
| Non-Technical Contact | Siva Bommaraju, UTEC, Inc., SivaRamakrishna.Bommaraju@Carrier.com , 260-247-4120 |
| Test Firm | David Schramm, SGS North America, Inc., david.schramm@sgs.com  , 973-461-7914 |
| TCB Email | uscts.tcb@sgs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| nbmRzgSn7F1kP2EVnIaUdA== | 2026-04-08 | Class II permissive change or modification of presently authorized equipment |
| LAA5AX3aZKxqqHoRz8lOoA== | 2026-04-08 | Class II permissive change or modification of presently authorized equipment |
| /L5pjJgZgodse3VIwuWLIg== | 2026-04-08 | Class II permissive change or modification of presently authorized equipment |
| m8bf9/3VoEszB0pH/h1bLg== | 2026-02-16 | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CM276NF Grant Date: 07/30/2020 |
| FYULwCCnafJlEo0e0zWP0g== | 2026-02-16 | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CM276NF Grant Date: 07/30/2020 |
| CuI0WYaOfvy4Rswin5bScg== | 2026-02-16 | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CM276NF Grant Date: 07/30/2020 |
Equipment Authorization
Grants
TCB Grant - Application nbmRzgSn7F1kP2EVnIaUdA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 04/08/2026 Application Dated: 04/08/2026 |
| UTEC, Inc. |
| 111 E. Wayne St., Suite 800, |
| Fort Wayne, IN 46802 |
| Attention: SIVA BOMMARAJU , |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AK6N-CM276NF |
| Name of Grantee: | UTEC, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi and BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.932 |
| C2PC to add 9 sets of dipole/PCB/PIFA antenna. C2PC filing due to the certified module installed in a host device and the antenna changed. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application m8bf9/3VoEszB0pH/h1bLg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 02/16/2026 Application Dated: 02/16/2026 |
| UTEC, Inc. |
| 111 E. Wayne St., Suite 800, |
| Fort Wayne, IN 46802 |
| Attention: SIVA BOMMARAJU , |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AK6N-CM276NF |
| Name of Grantee: | UTEC, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi and BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.137 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.194 |
| C2PC to add 9 sets of dipole/PCB/PIFA antenna. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
TCB Grant - Application LAA5AX3aZKxqqHoRz8lOoA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 04/08/2026 Application Dated: 04/08/2026 |
| UTEC, Inc. |
| 111 E. Wayne St., Suite 800, |
| Fort Wayne, IN 46802 |
| Attention: SIVA BOMMARAJU , |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AK6N-CM276NF |
| Name of Grantee: | UTEC, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi and BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| C2PC to add 9 sets of dipole/PCB/PIFA antenna. C2PC filing due to the certified module installed in a host device and the antenna changed. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application FYULwCCnafJlEo0e0zWP0g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 02/16/2026 Application Dated: 02/16/2026 |
| UTEC, Inc. |
| 111 E. Wayne St., Suite 800, |
| Fort Wayne, IN 46802 |
| Attention: SIVA BOMMARAJU , |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AK6N-CM276NF |
| Name of Grantee: | UTEC, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi and BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| C2PC to add 9 sets of dipole/PCB/PIFA antenna. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application CuI0WYaOfvy4Rswin5bScg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 02/16/2026 Application Dated: 02/16/2026 |
| UTEC, Inc. |
| 111 E. Wayne St., Suite 800, |
| Fort Wayne, IN 46802 |
| Attention: SIVA BOMMARAJU , |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AK6N-CM276NF |
| Name of Grantee: | UTEC, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi and BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.932 |
| C2PC to add 9 sets of dipole/PCB/PIFA antenna. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application /L5pjJgZgodse3VIwuWLIg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 04/08/2026 Application Dated: 04/08/2026 |
| UTEC, Inc. |
| 111 E. Wayne St., Suite 800, |
| Fort Wayne, IN 46802 |
| Attention: SIVA BOMMARAJU , |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AK6N-CM276NF |
| Name of Grantee: | UTEC, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi and BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.137 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.194 |
| C2PC to add 9 sets of dipole/PCB/PIFA antenna. C2PC filing due to the certified module installed in a host device and the antenna changed. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |